Jabber for windows 9.7 photo issue

Hello,
I'm facing an issue with corporate photos on Jabber version 9.7. Before, with version 9.2 i had the same problem but after add an entry on the file jabber-config.xml the corporate photos were already shown.
What can be the cause for this behaviour with version 9.7?

Hi Amit,
Hope you're doing well. Guess the problem is solved. We installed this new version 9.7 of jabber on a machine with Windows XP OS. After reviewing the Cisco Jabber for Windows 9.7 Release Notes I noticed that the only available Operating Systems for jabber 9.7 are:
Operating System Support Cisco Jabber for Windows 9.7 supports the following operating systems:
•Windows 7 (32 bit and 64 bit)
•Windows 8 (32 bit and 64 bit). Note: Metro Interface and Windows 8 RT are not supported.
•Windows 8.1 (32 bit and 64 bit). Note: MediaNet (including deskphone video feature) does not currently support Windows 8.1
Thanks a lot!

Similar Messages

Jabber for Windows Call popup photo

We have a Jabber for windows deployment currently running in our lab environment. In the buddy list we have the contacts with their photo. When we start a call or receive a call a call popup screen appears. In this screen the photo of the called person i not displayed..
Is this possible? If i look at the pictures cisco provides there is always a photo of the caller.

Hi,
This is very common scenario in case the number to contact resolution does not work. You need to create directory lookup rules to modify the incoming number so that it matches the number configured for the contact in question.
Here's an example
You have a contract named John Doe with a DN configured in AD as 101. The contact has an avatar.
You get an incoming call from John Doe but the incoming number is 9101.
This will result in the avatar not being displayed for a contact because number 9101 does not match the contact's configured DN.
So in summary you need to use Directory Lookup Rules and/or Application Dial Rules
HTH,
Christos

Jabber for Windows - Outlook Meeting integration issue/questions

Hi,
A couple of questions if anyone else has experienced or can answer:
1. When you turn on Jabber it appears in the trace file to create a transitionlist of meetings in your calendar for the next four hours. Eg if meeting 8-9 it will show 8:00 BUSY
9:00 FREE
and this works ok. This transitionlist also seems to update each time a status change occurs from what I have observed.
The problem we seem to have is if I open Jabber at 7.45am and have a meeting 8 - 9 then it shows "In a meeting", then if I create a meeting at 9.15am for 10am-10.30am, the meeting status does not change as it seems to operate of the four hour transitionlist. I have the setting in the CUPS server for exchange sync to happen every twenty minutes, but this does not seem to update.
I'm be focussing on the wrong area but basically not all calendar appt's update status in Jabber, especially the one's created within the four hour pperiod.
2. To have the presence status of a person in an Outlook email address field, do you need 2010 or does it work with prior versions, we currently operate 2003. I have configured the SIP component in AD, but no status or click to call facility from Outlook.
Thanks in advance
Mal

Hi Mal,
Thanks for your post. Issue (1) sounds like a configuration issue in your setup. Please open a TAC case for further assistance.
Regarding (2), Jabber for windows does noot support Office 2003. List of supported MS Office applications is listed in Jabber for Windows administration guide.
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_01000.html#reference_AC2F9334FEC54DA98861EB52944C6F08
Thanks,
Maqsood

Jabber for Windows client Voice Mail issue

hi, cisco guys
    i have a collaboration test for my customer in resent days.
    the follow picture is the topo of my test system
   1. cucm1 use ICT non-GK trunk to connected with cucm2 and the ip phones with dn 56xx registered on cm1
    the iphones and jabber clients with dn 54xx registered on cm2
   2. cm2 intergrated with Unity Connection server and Cups server
       the version of cm1 and cm2 and unity connection is 8.6.2-21900
      the version of cups is 8.6.4
3. the issue occurrenced when the ip phone user 5412 call to 5411 but no answered, user 5412 sent a
      voice mail to user 5411，only MVI of the ip phone 9951 with dn 5411 turned on but jabber client wihtout any prompt message
      but when the user 5665 which registered on cm1 called user 5411 and sent a voice mail , status in normal,
      mvi turned on , the jabber client also can recived the prompt message and the the vocie mail could be played on the jabber client
      what's the issue probably be caused by & how can i solve it
      need your help!!!!

I don't know if you have a specific subnets permitted in the CUPS ACL
This is dangerous and incorrect guidence. The Incoming ACL allows the addresses defined to bypass authentication. In other words, I could impersonate your CEO if I wanted to. There are only two common use cases where doing this is appropriate: 1) the CUxAC server IP; or 2) older versions of CCX where CAD didn't support DIGEST authentication.
As for the original question: your English is difficult to understand. Is the following problem statement accurate?
When 5412 on CM2 leaves a voicemail for 5411 on CM2, the MWI is lit for 5411 but Jabber does not reflect the waiting message?
If this is accurate, is the message also shown in the Web Inbox? https:///inbox
The serverIP should be the CUC server defined in the voicemail profile on CUPS for the user who owns 5411.
Please remember to rate helpful responses and identify helpful or correct answers.

Jabber for Windows / iPhone - issue with photo and search

Dear community,
I have an issue regarding Cisco Jabber for Windows as well as iPhone & iPad.
I recently upgraded our Call Manager infrastructure from 8.6.5 to 10.0. Along with that, I wanted to rollout the new Jabber for Windows (9.7.2) because now we use a very old version (9.2.1).
After I upgraded my test client, I noticed that the user photos (which are retrieved from active directory) were gone.
So for the first time, I decided to modify the the jabber-config.xml (I attatched the two different versions).
I used the jabber config generator to create the new version: https://supportforums.cisco.com/document/106926/jabber-config-file-generator
My attempt is to achive these goals:
1) I want one config file which is working with Jabber for Windows, iPhone & iPad, Android as well as Jabber for Mac
2) I want a secure connection from the client to our directory server
3) I want to retrieve the user photos from the active directory user (attribute thumbnailPhoto)
4) Jabber should find only users which are a member of the active directory group "example" (example is a nested group which contains several users and at least _one_ other group). Until now, the whole active directory was searched for users/contacts.
So far, 1) and 2) seems to work fine. 3) and 4) are the troublemakers and I really don't no why.
Can somebody help me?
Best regards,
René

Look at this thread. You can find the answer there.
https://supportforums.cisco.com/discussion/12241391/ldap-contacts-and-photos-jabber-ipad-iphone-and-android-not-working
First I had to uncheck "Use UDS for Contact Resolution" and then I had to create a new jabber-config.xml and upload it to the TFTP server.
But there are a few limitations you have to deal with. But I have mentioned that in the other thread.

Cisco Jabber for Windows Voicemail issue

At this I'm in processing of implementation Cisco Jabber UC solution for big Company.
I use CUCM 9.1.2, Cisco IM and Presence 9.1.2, CUC 9.1.2, Cisco Jabber for Windows 9.6.1.
I have issue in Cisco Jabber with VoiceMail Integration - when I leave voice message for any user,
than this message is arrived only him Cisco IP Phone, but not in him Cisco Jabber.
From Cisco Jabber Connectivity status in help menu I see that VoiceMail service is successfully connected
and I see VoiceMail button in Cisco Jabber.
How can I resolve this issue?

Have you configured the UC Service profile on CUCM with both Voicemail server and mailbox servers?

Jabber for Windows 9.2 deskphone control issue

Hi experts,
I'm having a problem with the newly installed Jabber for Windows 9.2.0. When I click on the bottom right "control phone" and select my Cisco 7941 it fails. I tried restarting the Cisco CTIManager service with no luck.
Deployment:
IM&Presence: cloud (Webex service)
CUCM version: 8.6(2a)
LDAP integration: full (with authentication)
Deskphone control was working prior the upgrade of Jabber for Windows. Everything else remained the same version.
Using Jabber softphone as a client still works fine.
CUCM ENd User is correctly configured.
Wireshark trace of my Jabber for Windows 9.2 client communicating with CUCM when attempting to control my deskphone shows the following:
Username: filippo.zangheri
Password: checked three times (it is correct because Jabber softphone works fine).
Any hint?
Thanks.
Filippo

Davide,
I know i am kind of late to the party on this one but i have fixed my issue and wanted to give you the information to see if this will work for you. If this is even still an issue?
I too had the same issue and just like you i confirmed everything was correct however I discovered something when I was looking into my End User profile on the CUCM. I had originally swapped my 7971 phone with a new 8945 phone and I had both phones associated with my line for a while before I removed the old 7971.
My End User profile still had both phones associated with my number even though the 7971 phone had been removed from my line. This was not allowing the CTI to connect to my 8945 phone or allow my jabber client to "Control Phone" properly because it couldn't figure out which phone to control. I went into the CUCM and physically deleted the 7971 phone from the system which released the associated phone in my End User profile. Once I did that, I "Control Phone" in my Jabber client and voila it worked like a charm!
To make sure I didn't have any Jabber client issues after doing this i signed out of my Jabber client and deleted the local system profile for the Jabber client and then signed back into Jabber and let it recreate the profile. Once that was done i have not had any issues with my Jabber client controlling my phone and all functions work perfectly.
Hope this helps...

Cisco Jabber for Windows User Photos

CUPS 8.6.3
Jabber Client for Windows Version 9.0.1 Build 8802
I noticed that the Cisco Jabber for Windows Client does not automatically update with the photos that updated in Active Directory.
I had updated a user's photo in AD and noticed that it would not change. I browsed to "C:\Users\<user name>\App Data\Local\Cisco\Unified Communications\Jabber\CSF\Photos" and had to manually delete the user photos in this folder. I exited out of the Jabber Client and restarted the program. When I did this, the Jabber Client crashed, I saved the crash report, and re-opend the Jabber client. This time the client opened properly, and the updated photos were now appearing!
Seems like Cisco would not have set the photos to Cache to the local computer....
Any thoughts?

Yes, Here is a sample .xml script.
<?xml version="1.0" encoding="utf-8"?>
http://www.cisco.com/CiscoJabberSetup.msi
          Cisco
          http://www.cisco.com/web/fw/i/logo-open-graph.gif
          http://www.cisco.com
          Cisco Jabber for Windows
          http://server_name.cisco.com/jabber.png
          http://www.cisco.com/en/US/customer/products/ps12511/tsd_products_support_series_home.html
          Cisco Jabber
          http://server_name.cisco.com/jabber.png
          http://www.cisco.com/web/products/voice/jabber.html
EDI
1
YOURDOMAINCONTROLLER
389
0
ldapaccount
ldapaccountpassword
dc=XXXXXXX,dc=XXXXXXX,dc=com
ipPhone
True
sAMAccountName
http://www.yourinternalwebserver.com/User%20Photos/Profile%20Pictures/sAMAccountName.jpg
true
true
.exe;.msi;.rar;.zip;.mp3
false
presence
The bold is how we pulled photos from a directory on a web server
If you don't have IIS running on a server you can replace
http://www.yourinternalwebserver.com/User%20Photos/Profile%20Pictures/sAMAccountName.jpg
with
\\Your server\c$\PhotoFolder\sAMAccountName.jpg

Jabber for Windows- VM issue

I had configured Jabber for windows in windows 7, the problem is after logging into jabber client iam not able to get the "phone accounts" under options.
Iam able to call , and recieve calls but no voice mail. In the Jabber cleint diagnostic it shows username and password is wrong for voice mail.
If i have 'phone acounts' option in jabber client i could set username and password for voice mail. Iam able to telnet the unity server.
Any clue?
We have IM&Presence 9.0, CUCM 9.0
Jabber - 9.2
Tnx
Bobby

HI,
As Aron states - you can configure your client to use same login and password ID as other UC services. This will then mask the fields you see in your jabber client. This is great when you don't want your users to have to populate the fields. The less they have to do the better.
Check your Unity Connection system - is it AXL ot AD or neither ?
If you can, your better to use only one username / password across your UC environment. For now just check your setting for the VM service is not set .

Jabber for Windows Voicemail Playback Issue

Hi,
I have Jabber for Windows installed and voicemail is working ok but when I playback a voicemail from the Jabber client the MWI light does not go out on the phone. If you do the opposite ie listen to a new voicemail through the phone the new message indicator goes out on jabber.
Also if you listen to the voicemail through Jabber client the voicemail plays through the PC speakers. Is there anyway in getting Jabber to direct the call to the phone so the user can pick the handset to listen like you can when listening to voicemail through the Unity Connection Web Inbox.
Thanks for you time
Regards
Neil

Hi Neil,
Playing the voicemails in Jabber should turn off the MWI light. You need to open a TAC case and sent on a problem report to debug this further.
For the second question, the only way I think you can do this is by setting Jabber to deskphone mode and then using the "Call Voicemail" button.
- Colin

Jabber for windows 9.2.6 client

hi
i have just upgraded some of my cisco jabber for windows clients to the latest release 9.2.6 (upgraded from 9.2.3)
i noticed that the first time the client startsup i get certificate warnings for our CUCM-PUB, SUB, CUC device and CUPS server. (all version 8.6)
all use the standard cisco SSL certificate (have not deployed 3rd party SSL certificates)
is there a way to get all these certificates trusted by the client machines, it has never prompted me before and works fine with 9.2.3
on the mac clients i have added them to the keychain when i first deployed the clients (manual job) but i like to see if i can automate this for my 30 windows clients (the users will not click on this themselves and will use it as an excuse not to load jabber (they don't like the call window pop ups but that is something for jabber 9.6 client
any idea how to get these certificates trusted by the windows computers (we have an 2008 r2 active directory so could do something with an group policy and or use our own internal windows certificate authority)
many thankss

when i run show web-security i get this
admin: show web-security
Version: V3
Serial Number: 441991719279266168307794
SignatureAlgorithm: SHA1withRSA (1.2.840.113549.1.1.5)
Issuer Name: CN=mydomain-CA, DC=mydomain, DC=com
Validity From: Mon Oct 28 15:32:30 GMT 2013
           To:   Wed Oct 28 15:32:30 GMT 2015
Subject Name: CN=uk-cucm-pub.mydomain.com, OU=IT, O=mydomain, L=London, ST=London, C=GB
Key: RSA (1.2.840.113549.1.1.1)
    Key value: 3082010a0282010100d2a01565f2533b3602158e83fede75fef2751aa957902e0e556e814bb7e6aaed5d5138b6cf3d87d59f5c4be2740ab9f5dc3318a34ab551daa817f6ccd562c3c628f75ef278ed81bbd816ec44d178da86850c3bdd74b727cde092616e7674785c45efc88e98ba4d89da97fc92ac2901f41c23ed692460a1d64c171a6d5613dfe2e1bab2b82f5f1a5d9fe55b067e858a0d2cd48a8be59c9e54cccdac1238acd2738128626252b3e69198fc852217f930d6cd2bc6a3481452be355bae6c6ccfc7d5e86a39ff7b0304cfb53e1555ccc8c4224cf661f912946b4e0db2926991d704f65cd92546155048cecb0f11c5046f743434d1577cbb4c175611acdf2fbf33bfb30203010001
Extensions: 7 present
     Extension: ExtKeyUsageSyntax (OID.2.5.29.37)
     Critical: false
     Usage oids: 1.3.6.1.5.5.7.3.1,
     Extension: KeyUsage (OID.2.5.29.15)
     Critical: false
     Usages: digitalSignature, keyEncipherment,
     Extension: SubjectKeyIdentifier (OID.2.5.29.14)
     Critical: false
     keyID: 8e9c68b7e4acc73c6734b1df3d9ca0a7ccb7183d
     Extension: AuthorityKeyIdentifier (OID.2.5.29.35)
     Critical: false
     keyID: 88c4622540d7efbbdac1af207249c77c287f9c6c
     Extension: CRLDistributionPoints (OID.2.5.29.31)
     Critical: false
     distributionPoint
        fullName: 1 names
          1) ldap:///CN=mydomain-CA,CN=UK-CA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=mydomain,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint (uri)
     Extension: AuthorityInfoAccessSyntax (OID.1.3.6.1.5.5.7.1.1)
     Critical: false
     accessMethod: 1.3.6.1.5.5.7.48.2
     accessLocation: ldap:///CN=mydomain-CA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=mydomain,DC=com?cACertificate?base?objectClass=certificationAuthority (uri)
     Extension: (OID.1.3.6.1.4.1.311.20.2)
     Critical: false
     Value: 04141e12005700650062005300650072007600650072 ]
Signature:
lots of text
]-----BEGIN CERTIFICATE-----
certificate characters
-----END CERTIFICATE-----
no sign of subject alternate names in those details so am not sure how i would change this
on your cucm system are your host details listed as ip address or host name, mine are listed as ip address and perhaps the certificate mismatch is caused by these settings?
Host Name/IP Address Description
10.33.2.20 PUBLISHER
10.33.2.21 SUBSCRIBER 1
if the cucm servers were listed as uk-cucm-pub or uk-cucm-pub.mydomain.com and uk-cucm-sub.mydomain.com perhaps it would accept the certificates
web-security
Version: V3
Serial Number: 441991719279266168307794
SignatureAlgorithm: SHA1withRSA (1.2.840.113549.1.1.5)
Issuer Name: CN=Accel-CA, DC=accel, DC=com
Validity From: Mon Oct 28 15:32:30 GMT 2013
           To:   Wed Oct 28 15:32:30 GMT 2015
Subject Name: CN=uk-cucm-pub.accel.com, OU=IT, O=Accel, L=London, ST=London, C=GB
Key: RSA (1.2.840.113549.1.1.1)
    Key value: 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
Extensions: 7 present
     Extension: ExtKeyUsageSyntax (OID.2.5.29.37)
     Critical: false
     Usage oids: 1.3.6.1.5.5.7.3.1,
     Extension: KeyUsage (OID.2.5.29.15)
     Critical: false
     Usages: digitalSignature, keyEncipherment,
     Extension: SubjectKeyIdentifier (OID.2.5.29.14)
     Critical: false
     keyID: 8e9c68b7e4acc73c6734b1df3d9ca0a7ccb7183d
     Extension: AuthorityKeyIdentifier (OID.2.5.29.35)
     Critical: false
     keyID: 88c4622540d7efbbdac1af207249c77c287f9c6c
     Extension: CRLDistributionPoints (OID.2.5.29.31)
     Critical: false
     distributionPoint
        fullName: 1 names
          1) ldap:///CN=Accel-CA,CN=UK-CA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=accel,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint (uri)     [
     Extension: AuthorityInfoAccessSyntax (OID.1.3.6.1.5.5.7.1.1)
     Critical: false
     accessMethod: 1.3.6.1.5.5.7.48.2
     accessLocation: ldap:///CN=Accel-CA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=accel,DC=com?cACertificate?base?objectClass=certificationAuthority (uri)
     Extension: (OID.1.3.6.1.4.1.311.20.2)
     Critical: false
     Value: 04141e12005700650062005300650072007600650072 ] Signature:
0000: 90 e8 32 00 2e f3 58 ec 18 20 6d 54 0a 49 9c ce [..2...X.. mT.I..]
0010: 94 90 02 6e 2f 15 1e f2 c3 6c 45 96 14 8e ff 25 [...n/....lE....%]
0020: 39 db 50 08 03 3b 48 a3 c7 69 7a 03 76 d1 e3 3d [9.P..;H..iz.v..=]
0030: 73 94 08 7c d3 13 f2 7c 58 ff ba 26 47 ed 6a 50 [s..|...|X..&G.jP]
0040: 9d 80 f8 64 cc dd 34 9f 95 32 3f 7f 32 04 f4 8b [...d..4..2?.2...]
0050: 86 e3 9d 23 03 06 06 ad f2 1b e0 0a a6 ed c0 3d [...#...........=]
0060: d4 dd 57 0f 61 d3 2b 14 d1 d0 3e c4 3a e3 df ac [..W.a.+...>.:...]
0070: c7 b8 dd 37 ba e2 e6 aa 35 a1 9b 7d 27 b8 d0 5a [...7....5..}'..Z]
0080: d9 cc d9 89 90 e0 72 de b1 32 4d d2 fc c8 2e c0 [......r..2M.....]
0090: a1 f9 57 8e b7 9d 1d 00 d8 a8 4d 26 ed c6 92 f6 [..W.......M&....]
00a0: 99 7a 1c ee 58 8d 76 20 7b af a1 54 0b 57 c3 d3 [.z..X.v {..T.W..]
00b0: 92 1f 64 d0 04 22 ae 17 c2 2a 1d d1 83 e0 c3 85 [..d.."...*......]
00c0: 67 4e 94 67 65 e8 e2 39 87 ef 78 f7 41 7e bd 34 [gN.ge..9..x.A~.4]
00d0: 79 8d be ae 45 5c 56 73 1d 6c 02 bf 3a 93 b4 a9 [y...E\Vs.l..:...]
00e0: f8 80 76 f1 ad 42 6e 42 cd 54 00 1e ca c5 b8 98 [..v..BnB.T......]
00f0: 05 a4 dd 3c 89 47 7b 4a 61 af 4b 32 2c 0c 96 a6 [...<.G{Ja.K2,...]]-----BEGIN CERTIFICATE-----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==
-----END CERTIFICATE-----

Jabber for Windows openLDAP and Deskphone Control

Hello all
I have a new install of 9.1 CUCM, with CUCM IM and Presence. I'm trying to get Jabber 4 windows functioning with an openLDAP directory, and also get Deskphone control working. I suspect i missed something with the configuration as this 9.1 interface is a little different than i'm used to.
First of all, does the concept of a Jabber-Config.xml still apply to a 9.1 install or does the "Service Profile Configuration" in the CUCM interface write the Jabber-config.xml file for you? If my customer uses openLDAP for their LDAP how should I configure the "Service Profile" or do I still use a jabber-config.xml file?
I have successfully tied openLDAP into CUCM with Authetication and brought the users into CUCM. I tested Authentication by logging into the End user page for both CUCM and the CUP server so I know authenticaiton is working. I can login to Jabber but when i click on Help "connection Status" it shows me only connected to "PRESENCE" and "OUTLOOK ADDRESS BOOK" my "Directory", and DESKPHONE" will not connect.
Can I actually get a copy of "my jabber-config.xml" file from the CUCM server to see what it looks like?
Thanks all

Ok I have half of the problem resolved. I got Deskphone controll working with CTI.
Still working on the LDAP issue with openLDAP
My config file looks like so
<?xml version="1.0" encoding="utf-8"?>
   EDI
   1
   ldap.acme.ca
   389
   backup.acme.ca
   389
   0
   uid=voipldap,ou=Users,dc=acme,dc=ca
   password
   givenname
   (&(objectClass=inetOrgPerson)
   telephonenumber
   uid
   ou=users,dc=acme,dc=ca
I got this from page 117 of this guide
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_1/JABW_BK_CA48EE46_00_cisco-jabber-for-windows-administration.pdf
The error I'm getting "invalid credential" but i know they are good because i'm using the same account and path for the CUCM LDAP sync.
Any help would be appreciated.

Jabber for Windows - wildcard search against LDAP directory

Hi all,
I have set up an on premise environment with CUCM, CUPS and a 3rd party LDAP Directory. For CUPC everything is working fine. For Jabber for Windows it took me some time to find the correct jabber-config.xml settings to make it working.
At the moment I am able to search the LDAP Directory, but I have to write the complete Name, i.e. "Miller, John", in the search field. If I try it with "Miller" only, I get no results for my search.
I played arround with the <UseWildcards>0</UseWildcards> tag without any changes in the behaviour.
Is there anybody who can help?
Best regards
Manfred

Hi Manfred,
Jabber for Windows has been tested with following directory services:
Supported Directories
Microsoft Active Directory 2003
Microsoft Active Directory 2008
Cisco Unified Communications Manager User Data Service UDS is supported on Cisco Unified Communications Manager version 8.6.2 or later.
OpenLDAP
The behavior you are seeing could be related to interop issues. I suggest to open a TAC case for further assistance.
Thanks,
Maqsood

Jabber for Windows 9.2 Deskphone Control

Hi,
I have a deployment with:
CUCM 9.1(1a) (9.1.1.20000-5)
IM and Presence 9.1(1a) 9.1.1.20000-5
Jabber for Windows 9.2.3(4417)
I have got most features working but Deskphone Control is not working. I can see the devices associated with my user from within Jabber when I select "Use my phone for calls" but cannot control them.
The connection status page shows the correct IP address for the CTI server.
I have spent hours reading through various documents and forums which seem to contain contradictory advice.
To clarify theserver versions that I have deployed support the new UC Services which are referenced from a Service Profile which is assigned to the user.
I am not making any progress resolving this issue. Does anyone have any advice on how to move forward with this?
Thanks
James

Hi Daniel,
we have a Problem with AD-User and DeskPhone ...
The "Active Local User" can control a DeskPhone
The "Active LDAP Synchronized User" can't control a DeskPhone from same PC, but he can controll a Softphone.
Cisco UCM - 9.1.2.10000-28 with LDAP Sync/Auth via 3269 (success)
Cisco UCMIMP - 9.1.1.31900-1
Cisco Jabber - 9.6.0 Build 17088
564 INFO [0x0000226c] [src\common\thread\WorkerThread.cpp(94)] [csf.ecc] [run] - Started thread: CtiConnection
564 DEBUG [0x0000226c] [utilities\socket\TcpSocketHelper.cpp(82)] [csf.ecc] [connect] - About to connect to 172.20.1.11
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(957)] [csf.ecc] [SendRequest] - CDPProvider::SendRequest, msg.sequenceNumber=1, pObject=0477A214, pdunames[msg.msgID]=PROVIDER_OPEN_REQUEST
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(967)] [csf.ecc] [SendRequest] - SendRequest setting msg.sequenceNumber to , msg.sequenceNumber=2
564 DEBUG [0x0000226c] [oneprovider\QBE\ProtocolElement.cpp(330)] [csf.ecc] [encode] - Message::encode: , msg.protoVersion=0x000e0000, msg.msgID=3, sizeof(Header)=32, fixedSize=108, varSize=90
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(973)] [csf.ecc] [SendRequest] - SendRequest Succeed., pdunames[msg.msgID]=PROVIDER_OPEN_REQUEST, msg.sequenceNumber=2
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(986)] [csf.ecc] [SendEvent] - CDPProvider::SendEvent, pObject=0477A210, nType=1001
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(919)] [csf.ecc] [OnEvent] - CDPProvider::OnEvent, pObject=0477A210, nType=1001, pvThis=0477A210
564 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(317)] [csf.ecc] [ecc::DeskPhoneConnectionContext::OnProviderEventUpdated] - OnProviderEventUpdated(1001), state=STATE_INITIAL_LOGIN, loginstate=LOGINSTATE_OPENING
564 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1148)] [csf.ecc] [DispatchTheMessage] - CDPProvider::DispatchTheMessage, nPduNum=4, pduName=PROVIDER_OPEN_RESPONSE
564 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1232)] [csf.ecc] [DispatchTheMessage] - Received , pdunames[nPduNum]=PROVIDER_OPEN_RESPONSE, seqNum=2
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(267)] [csf.ecc] [HandleMessage] - CDPProvider::HandleMessage, nPduNum=4
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(407)] [csf.ecc] [HandleResponse_ProviderOpen] - CDPProvider::HandleResponse_ProviderOpen
564 DEBUG [0x0000226c] [oneprovider\QBE\ProtocolElement.cpp(360)] [csf.ecc] [decode] - Message::decode: , totalSize=107, type=0, magic=4294958557, msg.protoVersion=0x000e0000, pduNum=4, hdrSize=32, fixedSize=52, varSize=31
564 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(415)] [csf.ecc] [HandleResponse_ProviderOpen] - CUCM protocol version: , resp.getProtoVersion()=0x000e0000
564 WARN [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1026)] [csf.ecc] [ResetHeartbeatTimer] - m_heartbeatIntervalS not set, timeout not set.
845 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1148)] [csf.ecc] [DispatchTheMessage] - CDPProvider::DispatchTheMessage, nPduNum=126, pduName=PROVIDER_OPEN_COMPLETED_EVENT
845 DEBUG [0x0000226c] [c\deskphoneprovider\DPProvider.cpp(1290)] [csf.ecc] [DispatchTheMessage] - PDUTYPE_ProviderEvent or PDUTYPE_Heartbeat, nPduNum=126, pdunames[nPduNum]=PROVIDER_OPEN_COMPLETED_EVENT
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(267)] [csf.ecc] [HandleMessage] - CDPProvider::HandleMessage, nPduNum=126
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(488)] [csf.ecc] [HandleEvent_ProviderOpenCompleted] - CDPProvider::HandleEvent_ProviderOpenCompleted
845 DEBUG [0x0000226c] [oneprovider\QBE\ProtocolElement.cpp(360)] [csf.ecc] [decode] - Message::decode: , totalSize=161, type=0, magic=4294958557, msg.protoVersion=0x000e0000, pduNum=126, hdrSize=32, fixedSize=72, varSize=65
845 WARN [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(502)] [csf.ecc] [HandleEvent_ProviderOpenCompleted] - ProviderOpen failed: reason: 0x8ccc0060, Directory login failed - authentication failed.
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(986)] [csf.ecc] [SendEvent] - CDPProvider::SendEvent, pObject=0477A210, nType=1008
845 DEBUG [0x0000226c] [rc\deskphoneprovider\DPProvider.cpp(919)] [csf.ecc] [OnEvent] - CDPProvider::OnEvent, pObject=0477A210, nType=1008, pvThis=0477A210
845 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(317)] [csf.ecc] [ecc::DeskPhoneConnectionContext::OnProviderEventUpdated] - OnProviderEventUpdated(1008), state=STATE_INITIAL_LOGIN, loginstate=LOGINSTATE_LOGGING_IN
845 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(891)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::DPLogoutWorkItem] - create DPLogoutWorkItem
845 DEBUG [0x0000226c] [pper\DeskPhoneConnectionContext.cpp(892)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::DPLogoutWorkItem] - Setting _loginState = LOGINSTATE_DISCONNECTING
845 DEBUG [0x0000226c] [c\deskphonewrapper\CC_DPService.cpp(926)] [csf.ecc] [ecc::CC_DPService::raiseLoginFailure] - raiseLoginFailure(5)
845 DEBUG [0x000013a0] [pper\DeskPhoneConnectionContext.cpp(898)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::run] - DPLogoutWorkItem::run()
845 INFO [0x0000226c] [\deskphonewrapper\CC_DPService.cpp(1078)] [csf.ecc] [ecc::CC_DPService::notifyConnectionStatusObservers] - dispatching ConnectionStatus Change eIdle
845 DEBUG [0x00002788] [c\deskphonewrapper\CC_DPService.cpp(298)] [csf.ecc] [ecc::CC_DPService::start] - Finished waiting for deskphone to go in to service...
845 INFO [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(218)] [csf.ecc] [Close] - CDPProvider::Close
845 INFO [0x0000226c] [control\CallControlManagerImpl.cpp(3092)] [csf.ecc.evt] [ecc::CallControlManagerImpl::notifyConnectionStatusChange] - CONNECTION_STATUS_CHANGE: eIdle
845 ERROR [0x00002788] [control\CallControlManagerImpl.cpp(1989)] [csf.ecc] [ecc::CallControlManagerImpl::doConnect] - doConnect() returnCode : AuthentincationFailure
845 DEBUG [0x000017a0] [s\telephonyservice\ECCObservers.cpp(153)] [csf-unified.telephony.ECCObserverLogger] [ECCObservers::onConnectionStatusChange] - onConnectionStatusChange(status = eIdle).
845 DEBUG [0x0000226c] [\deskphonewrapper\CC_DPService.cpp(1014)] [csf.ecc] [ecc::CC_DPService::raiseProviderStateChange] - Got cxn change, disconnecting deskphone video Idle
845 DEBUG [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(957)] [csf.ecc] [SendRequest] - CDPProvider::SendRequest, msg.sequenceNumber=2, pObject=0477A214, pdunames[msg.msgID]=PROVIDER_CLOSE_REQUEST
845 ERROR [0x00002788] [control\CallControlManagerImpl.cpp(2025)] [csf.ecc] [ecc::CallControlManagerImpl::doConnect] - doConnect() returnCode : eDeviceRegAuthenticationFailure
845 DEBUG [0x000017a0] [elephonyservice\BackgroundWorker.cpp(35)] [csf-unified.telephony.BackgroundWorkerLogger] [BackgroundWorker::doTask] - Adding new task to BackgroundWorker. Task name is: TelephonyAdapter::onConnectionStatusChange
845 INFO [0x0000226c] [rc\deskphonevideo\DeskPhoneVideo.cpp(76)] [csf.ecc] [ecc::DeskPhoneVideo::disconnect] - disconnecting
845 DEBUG [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(967)] [csf.ecc] [SendRequest] - SendRequest setting msg.sequenceNumber to , msg.sequenceNumber=3
845 INFO [0x00002788] [control\CallControlManagerImpl.cpp(2411)] [csf.ecc] [ecc::CallControlManagerImpl::doDisconnect] - --->
845 DEBUG [0x000017a0] [common\processing\TaskDispatcher.cpp(29)] [TaskDispatcher] [Processing::TaskDispatcher::enqueue] - Enqueue TelephonyAdapter::onConnectionStatusChange - Queue Size: 9
845 DEBUG [0x0000226c] [c\deskphonevideo\DeskPhoneVideo.cpp(315)] [csf.ecc] [ecc::DeskPhoneVideo::stopCdp] - Stopping CDP
845 DEBUG [0x000013a0] [oneprovider\QBE\ProtocolElement.cpp(330)] [csf.ecc] [encode] - Message::encode: , msg.protoVersion=0x000e0000, msg.msgID=9, sizeof(Header)=32, fixedSize=4, varSize=0
845 INFO [0x00002788] [pper\DeskPhoneConnectionContext.cpp(267)] [csf.ecc] [ecc::DeskPhoneConnectionContext::stop] - DeskPhoneConnectionContext::stop
845 DEBUG [0x000013a0] [rc\deskphoneprovider\DPProvider.cpp(973)] [csf.ecc] [SendRequest] - SendRequest Succeed., pdunames[msg.msgID]=PROVIDER_CLOSE_REQUEST, msg.sequenceNumber=3
845 DEBUG [0x0000226c] [c\deskphonevideo\DeskPhoneVideo.cpp(318)] [csf.ecc] [ecc::DeskPhoneVideo::stopCdp] - CDP stopped
845 INFO [0x000017a0] [src\AccessoriesManager.cpp(234)] [csf.accessory.event] [accessory::AccessoriesManager::onConnectionStatusChange] - Received onConnectionStatusChange - eIdle
845 DEBUG [0x00002788] [pper\DeskPhoneConnectionContext.cpp(891)] [csf.ecc] [ecc::DeskPhoneConnectionContext::DPLogoutWorkItem::DPLogoutWorkItem] - create DPLogoutWorkItem
845 INFO [0x000013a0] [\deskphoneprovider\CtiConnection.cpp(49)] [csf.ecc] [stop] - CtiConnection::stop
Thanks,
Guennadi

Jabber for Windows and Ldap Contacts without CUPC license

Dear Sr:
It is possible to add a user on ldap as a jabber contact WITHOUT assigning a CUPC license to the user?
The idea is that some users on the ldap don't have jabber but we should be able to add them as a contact AND we dont want to use jabber licenses for those users or have Presence server to load balance those users.
We can add Microsoft contact as jabber contact with no issues...
Thanks

LDAP Authentication of End Users in CUCM is strongly recommended for CUPC/Jabber. When you login to CUPC/Jabber it authenticates against CUCM. If LDAP doesn't have the same password (i.e. CUCM isn't synced from LDAP) the client won't be able to do LDAP queries if using BDI. This is because it re-uses the same credentials when it attempts to bind to LDAP. If Jabber is configured for EDI, which is only even possible on Jabber for Windows running on domain-joined workstations, then this is not as critical since it would use the Windows ADSI API in the context of the logged-in user. Using EDI exclusively would rule out Jabber for Mac, iOS, Android, and Windows on a non-domain joined workstation though.
As for usernames: You can continue to use employeeNumber if you wish. You'll need to ensure that the jabber-config.xml file maps the username to this value for everything to work. Note that this will be their XMPP URI: [email protected] so be sure that you're comfortable with employee numbers being public.
Please remember to rate helpful responses and identify helpful or correct answers.

Jabber for windows 9.7 photo issue

Similar Messages

Maybe you are looking for