Jabber for Windows Call popup photo

We have a Jabber for windows deployment currently running in our lab environment. In the buddy list we have the contacts with their photo. When we start a call or receive a call a call popup screen appears. In this screen the photo of the called person i not displayed..
Is this possible? If i look at the pictures cisco provides there is always a photo of the caller.

Hi,
This is very common scenario in case the number to contact resolution does not work. You need to create directory lookup rules to modify the incoming number so that it matches the number configured for the contact in question.
Here's an example
You have a contract named John Doe with a DN configured in AD as 101. The contact has an avatar.
You get an incoming call from John Doe but the incoming number is 9101.
This will result in the avatar not being displayed for a contact because number 9101 does not match the contact's configured DN.
So in summary you need to use Directory Lookup Rules and/or Application Dial Rules
HTH,
Christos

Similar Messages

Jabber for Windows Call history log

Hi. I am using Jabber for windows, integrated to the cucm as a extension number, all is just workink fine but I have a issue in the call logs at the jabber client.
Ex.If I dial +4599999999 or 099999999 then the call log only save the 99999999 number and that means I am not able to dial back to that number by pressing the number in the call history.
Any help regarding the issue is appreciated.
Bjørn

Hi Bjørn,
Can you provide a problem report for investigation?
1. Clear all logs under "C:\Users\username\AppData\Local\Cisco\Unified Communications\Jabber\CSF\Logs"
2. Make one call to reproduce problem.
3. Create a problem report (Help -> Report a problem...) and attach it to this thread (or email me directly).
Thanks,
Maqsood

Jabber for windows 9.7 photo issue

Hello,
I'm facing an issue with corporate photos on Jabber version 9.7. Before, with version 9.2 i had the same problem but after add an entry on the file jabber-config.xml the corporate photos were already shown.
What can be the cause for this behaviour with version 9.7?

Hi Amit,
Hope you're doing well. Guess the problem is solved. We installed this new version 9.7 of jabber on a machine with Windows XP OS. After reviewing the Cisco Jabber for Windows 9.7 Release Notes I noticed that the only available Operating Systems for jabber 9.7 are:
Operating System Support Cisco Jabber for Windows 9.7 supports the following operating systems:
•Windows 7 (32 bit and 64 bit)
•Windows 8 (32 bit and 64 bit). Note: Metro Interface and Windows 8 RT are not supported.
•Windows 8.1 (32 bit and 64 bit). Note: MediaNet (including deskphone video feature) does not currently support Windows 8.1
Thanks a lot!

Jabber for Windows Call Voicemail Option Pulls Outlook Contact with Matching digits of VM Pilot

Running J4W 9.2.2 and when we use the "Call Voicemail" option (we use a 4-digit pilot number), if the end user has an outlook contact that the last 4 of the phone number matches it pulls the outlook contacts name up and displays it in the connected call. Anyone else seen this behaviour and f so is this a known issue and is there a workaround for this?
Thanks,
Ethan

I Ethan,
I have this problem too. There was a Bug (CSCud57201) identified for release 9.1 with this problem. The bug notes say it should be solved on 9.2 but I'm running the same version as you and having exactly the same last digits match problem
Rui

Jabber for Windows / iPhone - issue with photo and search

Dear community,
I have an issue regarding Cisco Jabber for Windows as well as iPhone & iPad.
I recently upgraded our Call Manager infrastructure from 8.6.5 to 10.0. Along with that, I wanted to rollout the new Jabber for Windows (9.7.2) because now we use a very old version (9.2.1).
After I upgraded my test client, I noticed that the user photos (which are retrieved from active directory) were gone.
So for the first time, I decided to modify the the jabber-config.xml (I attatched the two different versions).
I used the jabber config generator to create the new version: https://supportforums.cisco.com/document/106926/jabber-config-file-generator
My attempt is to achive these goals:
1) I want one config file which is working with Jabber for Windows, iPhone & iPad, Android as well as Jabber for Mac
2) I want a secure connection from the client to our directory server
3) I want to retrieve the user photos from the active directory user (attribute thumbnailPhoto)
4) Jabber should find only users which are a member of the active directory group "example" (example is a nested group which contains several users and at least _one_ other group). Until now, the whole active directory was searched for users/contacts.
So far, 1) and 2) seems to work fine. 3) and 4) are the troublemakers and I really don't no why.
Can somebody help me?
Best regards,
René

Look at this thread. You can find the answer there.
https://supportforums.cisco.com/discussion/12241391/ldap-contacts-and-photos-jabber-ipad-iphone-and-android-not-working
First I had to uncheck "Use UDS for Contact Resolution" and then I had to create a new jabber-config.xml and upload it to the TFTP server.
But there are a few limitations you have to deal with. But I have mentioned that in the other thread.

Call/video not working between Cisco jabber for Windows and VCS control C40s

Hello,
I've been struggling with no luck how to make a call using Cisco Jabber for Windows 9.6.0 registered to CM 8.6.2 with intercluster ICT to another CM 8.6.2 where we have a VCS Control 7.0.2 via GK H225, and all C40s are registered as H.323.
The VCS has interworking between H323 and SIP, however not sure if there is any problem with that. Assuming it is ok, not sure either if I'm facing any interoperability issue because in my remote site I have C40 (H323 registered at VCS and SIP listening mode) and cisco jabber for windows which is SIP based.
If is not possible, would I be able to change my C40 from H323 to SIP at VCS, or have both H323/SIP registered at VCS? If so, will I need to change as well instead of GK I'll have to establish a SIP Trunk between the CM and VCS?
Another thing I do not believe either I would be able to have one VCS connected with two clusters, right?
I'm just trying to find a solution in case my current topology is not compatible, but feel free if you have any better idea to make it work.
Anyway here is what is happening:
When I make a call from my cisco jabber windows to C40 using alias number. The call is being redirected just fine to the C40 and it rings, however when someoene or the auto answer picks it up, the call dropped right away.
However, if I enabled the MTP in my CSF device, the call gets longer before dropping. I was even able to see my jabber " start video" turns green, before was grayed out all the time and the call dropped faster. I hear a fast busy tone.
I'm able to provide SDI traces, logs, diagnostic sip/h323 calls from VCS in order to know for sure if this is an incompatible issue or something I can workaround.
Let me know if someone of you are interested in read these logs or could point me on the right direction.
Thanks!

Ok,
I have looked at both logs. I have to mentinon though that you didnt
provide the log that shows the h323 setup between cucm and the VCS. This
is most likely because the call originated from a different cucm than
the ones you provided the logs from.
The call would have orginated from the first cucm in the cucm group of
this trunk: Name=RL_TRUNK_VIDEO
The cucm ip will be : 10.252.53.10.
This is the VCS log that confirms where the h323 request originated
from:
pr 10 22:50:29 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:29,187"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="54000"
Received RAS PDU:
Having said that here is my analysis of the logs that you sent..
Jabber sent an INVITE to CUCM and advertised all the codecs (audio and
video it can support)..
Observer that Jabber says it doesnt support G729 anexB
21:55:16.576 |//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message
from 10.223.20.73 on port 54677 index 90661 with 2220 bytes:
[862370,NET]
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/TCP 10.223.20.73:54677;branch=z9hG4bK000029d3
From: "4122107" <sip:[email protected]>;tag=00059a3c78000011000070b0
-00000e65
To: <sip:[email protected]>
Call-ID: [email protected]
Max-Forwards: 70
Date: Fri, 11 Apr 2014 01:55:16 GMT
CSeq: 101 INVITE
User-Agent: Cisco-CSF/9.4.1
m=audio 19252 RTP/AVP 0 8 18 105 104 101
c=IN IP4 10.223.20.73
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:105 G7221/16000
a=fmtp:105 bitrate=24000
a=rtpmap:104 G7221/16000
a=fmtp:104 bitrate=32000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 28878 RTP/AVP 97
c=IN IP4 10.223.20.73
++++Now lets observer the capabilites exchange during h245 negotiation
between cucm and VCS++++
Here CUCM advertises its caps to VCS (afterreceiving caps from VCS)
Note that G729A, G729AB, G729 is all advertised..
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,017"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : terminalCapabilitySet
capabilityTableEntryNumber 2,
       capability receiveAudioCapability :
g729wAnnexB : 6
       capabilityTableEntryNumber 3,
   capability receiveAudioCapability : g729AnnexAwAnnexB : 6
       capabilityTableEntryNumber 4,
       capability
receiveAudioCapability : g729 : 6
capabilityTableEntryNumber 5,
       capability receiveAudioCapability :
g729AnnexA : 6
++++++
After doing MSD (master slave determination, we move to the OLC phas e..
Here we see that the far end..c40 wants to use G729AB for media++++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,783"
Module="network.h323" Level="DEBUG": Src-ip="10.224.114.11" Src-
port="11163"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
+++Next VCS sends G729AB as the codec to use to CUCM+++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,784"
Module="network.h323" Level="DEBUG": Dst-ip="10.252.53.10" Dst-
port="45660"
Sending H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
   forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
     dataType audioData :
g729AnnexAwAnnexB : 20,
     multiplexParameters
h2250LogicalChannelParameters :
++++The next thing we get is an OLC reject from CUCM and this is where
th call drops++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= response : openLogicalChannelReject :
forwardLogicalChannelNumber 1,
   cause dataTypeNotSupported : NULL
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="INFO": Dst-ip="10.224.114.11" Dst-
port="11163"
Detail="Sending H.245 OpenLogicalChannelRejResponse
+++We then receive a call release from cucm with cause code of 47:
resource unavailable++++
Apr 10 22:50:32 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:32,365"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="50913"
Received H.225 PDU:
Q931
   Message Type: Release
Complete
   Call reference flag: Message sent from originating side
Call reference value: 0x7b
   Info Element : Cause
     Location: Usr
   Cause Value: Resource unavailable
   Info Element : User User
   Length = 22
Suggestions:
Change the region setting between the ICT trunk to VCS and Jabber to use
G711 and test again.

Jabber for Window, phone mode, how to disable "use my computer for calls"

We have a Citrix environment and only want to control the Cisco deskphone with Jabber for Windows in the phone mode.
We use CUCM 8.6.2 and I have installed Jabber for Windows 9.7.0 and all works fine, I can control my deskphone, make and receive calls, phonebook and Outlook integration works fine.
Is it possible to disable "use my computer for calls" as we do not want users to make calls via Citrix, but only use the deskphone for this.
Thanks, Perry

Hi Matthias,
Soft-phone mode cannot be disabled. Supported Features on Virtual Environment are the following.
Supported Features
    Instant messaging and presence with other Cisco Jabber clients
    Desk phone control
    Voicemail
    Presence integration with Microsoft Outlook 2007, 2010 and 2013
We have an existing defect which is in Terminated state because feature is not supported hence cannot be fixed.
CSCub40605 - J4W - Ability to disable softphone mode in Citrix environment.
HTH,
Please rate if you find this post helpful.
Regards,
Mohammed Noor

Jabber for Windows Video calling in Deskphone mode

Hi
Does Jabber for windows support video calling in deskphone mode? I have 7942 IP Phone, VT advantage camera on Laptop and Jabber clinet insatlled on laptop. Can i make video callng with Jabber in Deskphone mode?
It is not working please help.
Regards,
Andy

Hi Andy,
Yes, Jabber for Windows supports video calling in deskphone mode.
You'll need to install the Cisco Media Service Interface specific to your version of Jabber and correctly configure Jabber for Deskphone Video.
Please follow these instructions to configure Deskphone Video:
For Jabber for Windows 9.1
For Jabber for Windows 9.2
Once completed, if you run Jabber you should see the following when you open the Connection Status window (Help > Show connection status):
Regards,
Matt

Jabber for Windows 9.2.4 - Spinner freezes on "forward calls to"

On Jabber for Windows 9.2.4 when we activate "Forward calls to" - the forward is set on controlled phone, however the spinner freezes (see image) and won't clear until a different phone is selected for control. Setting "forward calls to" "none" does not clear the spinner.

Hi Mark,
this is known issue: 'CSCui37305 - After forwarded call, "Setting call forwarding..." does not disappear' and it is already resolved in 9.2.6.
Regards,
Nebojsa

Jabber for Windows 9.2 call stats

Does anyone know how to view call stats in Jabber for Windows 9.2 (or if it is even possible)?
Thanks, Mike

No. I mean call stats like dropped packets, codec, video resolution etc. I heard from my Cisco SE that Cisco doesn't have any immediate plans to implement this feature, which I think is a terrible oversight. How are we supposed to troubleshoot with call stats? Even an IP phone has ability to do that.

Cisco Jabber for Windows User Photos

CUPS 8.6.3
Jabber Client for Windows Version 9.0.1 Build 8802
I noticed that the Cisco Jabber for Windows Client does not automatically update with the photos that updated in Active Directory.
I had updated a user's photo in AD and noticed that it would not change. I browsed to "C:\Users\<user name>\App Data\Local\Cisco\Unified Communications\Jabber\CSF\Photos" and had to manually delete the user photos in this folder. I exited out of the Jabber Client and restarted the program. When I did this, the Jabber Client crashed, I saved the crash report, and re-opend the Jabber client. This time the client opened properly, and the updated photos were now appearing!
Seems like Cisco would not have set the photos to Cache to the local computer....
Any thoughts?

Yes, Here is a sample .xml script.
<?xml version="1.0" encoding="utf-8"?>
http://www.cisco.com/CiscoJabberSetup.msi
          Cisco
          http://www.cisco.com/web/fw/i/logo-open-graph.gif
          http://www.cisco.com
          Cisco Jabber for Windows
          http://server_name.cisco.com/jabber.png
          http://www.cisco.com/en/US/customer/products/ps12511/tsd_products_support_series_home.html
          Cisco Jabber
          http://server_name.cisco.com/jabber.png
          http://www.cisco.com/web/products/voice/jabber.html
EDI
1
YOURDOMAINCONTROLLER
389
0
ldapaccount
ldapaccountpassword
dc=XXXXXXX,dc=XXXXXXX,dc=com
ipPhone
True
sAMAccountName
http://www.yourinternalwebserver.com/User%20Photos/Profile%20Pictures/sAMAccountName.jpg
true
true
.exe;.msi;.rar;.zip;.mp3
false
presence
The bold is how we pulled photos from a directory on a web server
If you don't have IIS running on a server you can replace
http://www.yourinternalwebserver.com/User%20Photos/Profile%20Pictures/sAMAccountName.jpg
with
\\Your server\c$\PhotoFolder\sAMAccountName.jpg

Cisco Jabber for Windows in Extend and Connect mode and making outbound calls

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

Jabber for Windows 9.2.5 Local Contacts

Hi Guys,
     By default, Jabber for Windows 9.2.5, when searching for contacts, it first lists the local Outlook contacts, and then it shows the list of Corportate Directory Contacts.
     Is there a way to show only LDAP contacts?? I don't want the list of local contacts to be available.
Best Regards,

In jabber 9.2 you should be able to change this behavior from the client as well.
http://tools.cisco.com/squish/c5cB2
Local Contacts in Microsoft Outlook
Cisco Jabber for Windows lets users search for and add local contacts in Microsoft Outlook.
To search for local contacts in Microsoft Outlook with the client, users must have profiles set in Microsoft Outlook. In addition, users must do the following:
    Select File > Options.
    Select the Integration tab.
    Select either None or Microsoft Outlook.
To add local Microsoft Outlook contacts to contact lists in the client, local contacts must have instant message addresses in Microsoft Outlook.
To show contact photos in the client interface, local contacts in Microsoft Outlook must have instant message addresses.
To communicate with local contacts in Microsoft Outlook using the client, local contacts must have the relevant details. To send instant messages to contacts, local contacts must have an instant message address. To call contacts in Microsoft Outlook, local contacts must have phone numbers.
An additional step if needed. If you add this line to the XML and the Outlook contacts still show, you may want to delete the cache in order to remove locally cached contacts.
This cache can be found under:
%USER_PROFILE%\AppData\Roaming\Cisco\Unified Communications\Jabber\CSF\
Hope this helps as well!

Jabber for Windows- VM issue

I had configured Jabber for windows in windows 7, the problem is after logging into jabber client iam not able to get the "phone accounts" under options.
Iam able to call , and recieve calls but no voice mail. In the Jabber cleint diagnostic it shows username and password is wrong for voice mail.
If i have 'phone acounts' option in jabber client i could set username and password for voice mail. Iam able to telnet the unity server.
Any clue?
We have IM&Presence 9.0, CUCM 9.0
Jabber - 9.2
Tnx
Bobby

HI,
As Aron states - you can configure your client to use same login and password ID as other UC services. This will then mask the fields you see in your jabber client. This is great when you don't want your users to have to populate the fields. The less they have to do the better.
Check your Unity Connection system - is it AXL ot AD or neither ?
If you can, your better to use only one username / password across your UC environment. For now just check your setting for the VM service is not set .

Jabber for Windows Voicemail Playback Issue

Hi,
I have Jabber for Windows installed and voicemail is working ok but when I playback a voicemail from the Jabber client the MWI light does not go out on the phone. If you do the opposite ie listen to a new voicemail through the phone the new message indicator goes out on jabber.
Also if you listen to the voicemail through Jabber client the voicemail plays through the PC speakers. Is there anyway in getting Jabber to direct the call to the phone so the user can pick the handset to listen like you can when listening to voicemail through the Unity Connection Web Inbox.
Thanks for you time
Regards
Neil

Hi Neil,
Playing the voicemails in Jabber should turn off the MWI light. You need to open a TAC case and sent on a problem report to debug this further.
For the second question, the only way I think you can do this is by setting Jabber to deskphone mode and then using the "Call Voicemail" button.
- Colin

Jabber for Windows Call popup photo

Similar Messages

Maybe you are looking for