Jabber for Windows Call Voicemail Option Pulls Outlook Contact with Matching digits of VM Pilot

Running J4W 9.2.2 and when we use the "Call Voicemail" option (we use a 4-digit pilot number), if the end user has an outlook contact that the last 4 of the phone number matches it pulls the outlook contacts name up and displays it in the connected call.  Anyone else seen this behaviour and f so is this a known issue and is there a workaround for this?
Thanks,
Ethan                  

I Ethan,
   I have this problem too. There was a Bug (CSCud57201) identified for release 9.1 with this problem. The bug notes say it should be solved on 9.2 but I'm running the same version as you and having exactly the same last digits match problem
Rui

Similar Messages

  • Jabber For Windows - Calender Integration Option on deployment

    We're about to roll out Jabber for Windows to several hundred clients, and have an issue with the Outlook Integration option setting. Our users are migrating from Lotus Notes to Microsoft Outlook and once migrated to Outlook, will get Jabber for Windows. The problem we have is when installing Jabber for Windows, in many cases it takes IBM Lotus Notes as the default calendar integration, instead of Microsoft Outlook. (Notes is left on users pc as they still need to use Notes to access some backend databases)
    We will have to issue intructions to users to go in to File>Otions>Integration and make sure Microsoft Outlook is selected, but past experience tells us they won't actually read them!
    Does anyone know any way of setting on option on deployment to ensure Microsoft Outlook is selected ?
    Thanks
    Kelvin

    Hi David,
    there is an known issue where default MAPI file can't be opened on some PCs. To confirm this - we would need PRT from computer where issue can be reproduced.
    If you still have same problem then create a problem report (Start menu > Cisco Jabber > Cisco Jabber Problem Report) and attach with this thread. If you are not comfortable to attach report here, then raise a TAC case for further assistance.
    Regards,
    Nebojsa

  • Jabber for Windows Call popup photo

    We have a Jabber for windows deployment currently running in our lab environment. In the buddy list we have the contacts with their photo. When we start a call or receive a call a call popup screen appears. In this screen the photo of the called person i not displayed..
    Is this possible? If i look at the pictures cisco provides there is always a photo of the caller.

    Hi,
    This is very common scenario in case the number to contact resolution does not work. You need to create directory lookup rules to modify the incoming number so that it matches the number configured for the contact in question.
    Here's an example
    You have a contract named John Doe with a DN configured in AD as 101. The contact has an avatar.
    You get an incoming call from John Doe but the incoming number is 9101.
    This will result in the avatar not being displayed for a contact because number 9101 does not match the contact's configured DN.
    So in summary you need to use Directory Lookup Rules and/or Application Dial Rules
    HTH,
    Christos

  • Jabber for Windows Call history log

    Hi. I am using Jabber for windows, integrated to the cucm as a extension number, all is just workink fine but I have a issue in the call logs at the jabber client.
    Ex.If I dial +4599999999 or 099999999 then the call log only save the 99999999 number and that means I am not able to dial back to that number by pressing the number in the call history.
    Any help regarding the issue is appreciated.
    Bjørn

    Hi Bjørn,
    Can you provide a problem report for investigation?
    1. Clear all logs under "C:\Users\username\AppData\Local\Cisco\Unified Communications\Jabber\CSF\Logs"
    2. Make one call to reproduce problem.
    3. Create a problem report (Help -> Report a problem...) and attach it to this thread (or email me directly).
    Thanks,
    Maqsood

  • Jabber for Windows 9.2.2 (3271) lost contact pictures

    I upgraded to v9.2.2 (from an earlier 9.2) and all of my contact photos went away.  Our photos are stored in AD and I did clear the local client photo cache.  What gives?

    Hi Timothy,
    I've installed Jabber in a new laptop and I can see photos right now.
    It's same Jabber version, same user and the only difference I can see, apart from being a new laptop, is that the Operating System is 64 bits...
    If you want to give it a try... Maybe a new installation where Jabber was never before fixes the issue for you too. I know that this is not a great solution but maybe it can help us know where the problem is.
    I'll do a bit more testing with my colleagues and let you know if I find out anything else

  • Jabber for Windows cannot control 8841 desk phone

    Hello Team,
    We have a problem with desktop phone control in case of 8841 phone.
    When the user try to switch to the 8841 phone in Jabber then we got the following error message in the log: 
    2014-11-07 09:39:53,855 ERROR [0x00000298] [ice\TelephonyAdapterPhoneDevice.cpp(178)] [TelephonyAdapter] [TelephonyAdapter::selectDeviceImpl] - switchMode to device [SEP84802D7698D6] failed with error [eDeviceRegCouldNotOpenDevice]
    We get the red X on the phone icon, and the desktop phone control is not working.
    If the same user try to control 7940 phone, then it's working fine.
    The environment: UCM 9.1.2.12901-3, CUPS 9.1.1.51900-5, Jabber for Windows 10-5.2
    Edited:
    Same issue with UCM 10.5.1, CUPS 10.5.1, and Jabber for Windows 10.5.2.
    Regards,
    Zsolt

    Hi Zolt,
    The RT phones need below end user permissions also in order to control deakphones:
    Standard CTI Allow Control of Phones supporting Connected Xfer and conf
    Standard CTI Allow Control of Phones supporting Rollover Mode
    If they are not added, please add these permission.
    Regards

  • Jabber for Window, phone mode, how to disable "use my computer for calls"

    We have a Citrix environment and only want to control the Cisco deskphone with Jabber for Windows in the phone mode.
    We use CUCM 8.6.2 and I have installed Jabber for Windows 9.7.0 and all works fine, I can control my deskphone, make and receive calls, phonebook and Outlook integration works fine.
    Is it possible to disable "use my computer for calls" as we do not want users to make calls via Citrix, but only use the deskphone for this.
    Thanks, Perry

    Hi Matthias,
    Soft-phone mode cannot be disabled. Supported Features on Virtual Environment are the following.
    Supported Features
        Instant messaging and presence with other Cisco Jabber clients
        Desk phone control
        Voicemail
        Presence integration with Microsoft Outlook 2007, 2010 and 2013
    We have an existing defect which is in Terminated state because feature is not supported hence cannot be fixed.
    CSCub40605 - J4W - Ability to disable softphone mode in Citrix environment.
    HTH,
    Please rate if you find this post helpful.
    Regards,
    Mohammed Noor

  • Jabber for Windows Voicemail Playback Issue

    Hi,
    I have Jabber for Windows installed and voicemail is working ok but when I playback a voicemail from the Jabber client the MWI light does not go out on the phone. If you do the opposite ie listen to a new voicemail through the phone the new message indicator goes out on jabber.
    Also if you listen to the voicemail through Jabber client the voicemail plays through the PC speakers. Is there anyway in getting Jabber to direct the call to the phone so the user can pick the handset to listen like you can when listening to voicemail through the Unity Connection Web Inbox.
    Thanks for you time
    Regards
    Neil

    Hi Neil,
    Playing the voicemails in Jabber should turn off the MWI light. You need to open a TAC case and sent on a problem report to debug this further.
    For the second question, the only way I think you can do this is by setting Jabber to deskphone mode and then using the "Call Voicemail" button.
    - Colin

  • Jabber for Windows - Outlook Meeting integration issue/questions

    Hi,
    A couple of questions if anyone else has experienced or can answer:
    1. When you turn on Jabber it appears in the trace file to create a transitionlist of meetings in your calendar for the next four hours. Eg if meeting 8-9 it will show 8:00 BUSY
            9:00 FREE
    and this works ok. This transitionlist also seems to update each time a status change occurs from what I have observed.
    The problem we seem to have is if I open Jabber at 7.45am and have a meeting 8 - 9 then it shows "In a meeting", then if I create a meeting at 9.15am for 10am-10.30am, the meeting status does not change as it seems to operate of the four hour transitionlist. I have the setting in the CUPS server for exchange sync to happen every twenty minutes, but this does not seem to update.
    I'm be focussing on the wrong area but basically not all calendar appt's update status in Jabber, especially the one's created within the four hour pperiod.
    2. To have the presence status of a person in an Outlook email address field, do you need 2010 or does it work with prior versions, we currently operate 2003. I have configured the SIP component in AD, but no status or click to call facility from Outlook.
    Thanks in advance
    Mal

    Hi Mal,
    Thanks for your post. Issue (1) sounds like a configuration issue in your setup. Please open a TAC case for further assistance.
    Regarding (2), Jabber for windows does noot support Office 2003. List of supported MS Office applications is listed in Jabber for Windows administration guide.
    http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_01000.html#reference_AC2F9334FEC54DA98861EB52944C6F08
    Thanks,
    Maqsood

  • Jabber for Windows 9.1 and WebEx Voicemail Tab

    Guys
    we are using both Jabber for Windows (9.1) and WebEx connect clients. both connect to WebEx cloud services. when we use WebEx connect we have all features including voicemail but when we use Jabber for Windows there isnt any voicemail option at all present.
    both are doing phone integration and everything else is working fine.
    Now when we do the same for our andriod tablets we have the option for voicemail.
    i  understand that there are several feature differences but based on the searches ive been doing, voicemail should be present and i havent actually seen anyone having this problem. Note, this is using WebEx not CUPS.
    i know im probably missing something completely here.
    thanks again

    Do these users all have a conferencing profile assigned to them in CUCM (9.0) or CUPS (8.x)?
    Regards,
    Erik
    Sent from Cisco Technical Support iPad App

  • Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.

    Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.
    Setup includes CUCM9.0, Unity Connection 9.0, Presence 9.0....
    steps taken to configure(and results acheived)
    1-users created locally on CUCM and Enabled for IM and Presence.
    2-able to login to clients (CUPS7/8.6 and Jabber) but getting error Voicemail Error. The server has rejected the provided credentials. [1903]
    in order to verify there is nothing wrong with the credentials...i checked on unity and i am sure it's the PIN(12345) i need to use .
    Can Anyone help me out here...Thanks in advance.

    It's not looking for your PIN - that is only used over DTMF-based interactions - it's looking for your CUC password. If the mailbox is synced from LDAP and you have LDAP Auth enabled on CUC, then this would be your AD password. If it's synced over AXL, not synced at all, or LDAP synced but without Auth, then there will be an alphanumeric password field on the mailbox under Edit > Change Passwords.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Cisco Jabber for Windows Voicemail issue

    At this I'm in processing of implementation Cisco Jabber UC solution for big Company.
    I use CUCM 9.1.2, Cisco IM and Presence 9.1.2, CUC 9.1.2, Cisco Jabber for Windows 9.6.1.
    I have issue in Cisco Jabber with VoiceMail Integration - when I leave voice message for any user,
    than this message is arrived only him Cisco IP Phone, but not in him Cisco Jabber.
    From Cisco Jabber Connectivity status in help menu I see that VoiceMail service is successfully connected
    and I see VoiceMail button in Cisco Jabber.
    How can I resolve this issue?

    Have you configured the UC Service profile on CUCM with both Voicemail server and mailbox servers?

  • Call/video not working between Cisco jabber for Windows and VCS control C40s

    Hello,
    I've been struggling with no luck how to make a call using Cisco Jabber for Windows 9.6.0 registered to CM 8.6.2 with intercluster ICT to another CM 8.6.2 where we have a VCS Control 7.0.2 via GK H225, and all C40s are registered as H.323.
    The VCS has interworking between H323 and SIP, however not sure if there is any problem with that. Assuming it is ok, not sure either if I'm facing any interoperability issue because in my remote site I have C40 (H323 registered at VCS and SIP listening mode) and cisco jabber for windows which is SIP based.
    If is not possible, would I be able to change my C40 from H323 to SIP at VCS, or have both H323/SIP registered at VCS? If so, will I need to change as well instead of GK I'll have to establish a SIP Trunk between the CM and VCS?
    Another thing I do not believe either I would be able to have one VCS connected with two clusters, right?
    I'm just trying to find a solution in case my current topology is not compatible, but feel free if you have any better idea to make it work.
    Anyway here is what is happening:
    When I make a call from my cisco jabber windows to C40 using alias number. The call is being redirected just fine to the C40 and it rings, however when someoene or the auto answer picks it up, the call dropped right away.
    However, if I enabled the MTP in my CSF device, the call gets longer before dropping. I was even able to see my jabber " start video" turns green, before was grayed out all the time and the call dropped faster. I hear a fast busy tone. 
    I'm able to provide SDI traces, logs, diagnostic sip/h323 calls from VCS in order to know for sure if this is an incompatible issue or something I can workaround.
    Let me know if someone of you are interested in read these logs or could point me on the right direction.
    Thanks!

    Ok,
    I have looked at both logs. I have to mentinon though that you didnt
    provide the log that shows the h323 setup between cucm and the VCS. This
    is  most likely because the call originated from a different cucm than
    the ones you provided the logs from.
    The call would have orginated from the first cucm in the cucm group of
    this trunk: Name=RL_TRUNK_VIDEO
    The cucm ip will be : 10.252.53.10.
    This is the VCS log that confirms where the h323 request originated
    from:
    pr 10 22:50:29 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:29,187"
    Module="network.h323" Level="DEBUG":  Src-ip="10.252.53.10"  Src-
    port="54000"
     Received RAS PDU:
    Having said that here is my analysis of the logs that you sent..
    Jabber sent an INVITE to CUCM and advertised all the codecs (audio and
    video it can support)..
    Observer that Jabber says it doesnt support G729 anexB
    21:55:16.576 |//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message
    from 10.223.20.73 on port 54677 index 90661 with 2220 bytes:
    [862370,NET]
    INVITE sip:[email protected];user=phone SIP/2.0
    Via: SIP/2.0/TCP 10.223.20.73:54677;branch=z9hG4bK000029d3
    From: "4122107" <sip:[email protected]>;tag=00059a3c78000011000070b0
    -00000e65
    To: <sip:[email protected]>
    Call-ID: [email protected]
    Max-Forwards: 70
    Date: Fri, 11 Apr 2014 01:55:16 GMT
    CSeq: 101 INVITE
    User-Agent: Cisco-CSF/9.4.1
    m=audio 19252 RTP/AVP 0 8 18 105 104 101
    c=IN IP4 10.223.20.73
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:105 G7221/16000
    a=fmtp:105 bitrate=24000
    a=rtpmap:104 G7221/16000
    a=fmtp:104 bitrate=32000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=sendrecv
    m=video 28878 RTP/AVP 97
    c=IN IP4 10.223.20.73
    ++++Now lets observer the capabilites exchange during h245 negotiation
    between cucm and VCS++++
    Here CUCM advertises its caps to VCS (afterreceiving caps from VCS)
    Note that G729A, G729AB, G729 is all advertised..
    Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,017"
    Module="network.h323" Level="DEBUG":  Src-ip="10.252.53.10"  Src-
    port="45660"
     Received H.245 PDU:
     value MultimediaSystemControlMessage
    ::= request : terminalCapabilitySet
     capabilityTableEntryNumber 2,
           capability receiveAudioCapability :
    g729wAnnexB : 6
           capabilityTableEntryNumber 3,
       capability receiveAudioCapability : g729AnnexAwAnnexB : 6
           capabilityTableEntryNumber 4,
           capability
    receiveAudioCapability : g729 : 6
    capabilityTableEntryNumber 5,
           capability receiveAudioCapability :
    g729AnnexA : 6
    ++++++
    After doing MSD (master slave determination, we move to the OLC phas e..
    Here we see that the far end..c40 wants to use G729AB for media++++
    Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,783"
    Module="network.h323" Level="DEBUG":  Src-ip="10.224.114.11"  Src-
    port="11163"
     Received H.245 PDU:
     value MultimediaSystemControlMessage
    ::= request : openLogicalChannel :
       forwardLogicalChannelNumber 1,
    forwardLogicalChannelParameters
         dataType audioData :
    g729AnnexAwAnnexB : 20,
         multiplexParameters
    h2250LogicalChannelParameters :
    +++Next VCS sends G729AB as the codec to use to CUCM+++
    Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,784"
    Module="network.h323" Level="DEBUG":  Dst-ip="10.252.53.10"  Dst-
    port="45660"
     Sending H.245 PDU:
     value MultimediaSystemControlMessage
    ::= request : openLogicalChannel :
       forwardLogicalChannelNumber 1,
    forwardLogicalChannelParameters
         dataType audioData :
    g729AnnexAwAnnexB : 20,
         multiplexParameters
    h2250LogicalChannelParameters :
    ++++The next thing we get is an OLC reject from CUCM and this is where
    th call drops++
    Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
    Module="network.h323" Level="DEBUG":  Src-ip="10.252.53.10"  Src-
    port="45660"
     Received H.245 PDU:
     value MultimediaSystemControlMessage
    ::= response : openLogicalChannelReject :
    forwardLogicalChannelNumber 1,
       cause dataTypeNotSupported : NULL
    Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
    Module="network.h323" Level="INFO":  Dst-ip="10.224.114.11"  Dst-
    port="11163"
      Detail="Sending H.245 OpenLogicalChannelRejResponse
    +++We then receive a call release from cucm with cause code of 47:
    resource unavailable++++
    Apr 10 22:50:32 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:32,365"
    Module="network.h323" Level="DEBUG":  Src-ip="10.252.53.10"  Src-
    port="50913"
     Received H.225 PDU:
     Q931
       Message Type: Release
    Complete
       Call reference flag: Message sent from originating side
    Call reference value: 0x7b
       Info Element : Cause
         Location: Usr
       Cause Value: Resource unavailable
       Info Element : User User
       Length = 22
    Suggestions:
    Change the region setting between the ICT trunk to VCS and Jabber to use
    G711 and test again.

  • Jabber for Windows Video calling in Deskphone mode

    Hi
    Does Jabber for windows support video calling in deskphone mode? I have 7942 IP Phone, VT advantage camera on Laptop and Jabber clinet insatlled on laptop. Can i make video callng with Jabber in Deskphone mode?
    It is not working please help.
    Regards,
    Andy

    Hi Andy,
    Yes, Jabber for Windows supports video calling in deskphone mode.
    You'll need to install the Cisco Media Service Interface specific to your version of Jabber and correctly configure Jabber for Deskphone Video.
    Please follow these instructions to configure Deskphone Video:
    For Jabber for Windows 9.1
    For Jabber for Windows 9.2
    Once completed, if you run Jabber you should see the following when you open the Connection Status window (Help > Show connection status):
    Regards,
    Matt

  • Jabber for Windows 9.2.4 - Spinner freezes on "forward calls to"

    On Jabber for Windows 9.2.4 when we activate "Forward calls to" - the forward is set on controlled phone, however the spinner freezes (see image) and won't clear until a different phone is selected for control. Setting "forward calls to" "none" does not clear the spinner.

    Hi Mark,
    this is known issue: 'CSCui37305 - After forwarded call, "Setting call forwarding..." does not disappear' and it is already resolved in 9.2.6.
    Regards,
    Nebojsa

Maybe you are looking for