Jabber for Windows client Voice Mail issue

hi, cisco guys
    i have a collaboration test for my customer in resent days.
    the follow picture is the topo of my test system
   1. cucm1 use ICT non-GK trunk to connected with cucm2 and the ip phones with dn 56xx registered on cm1
    the iphones and jabber clients with dn 54xx registered on cm2
   2. cm2 intergrated with Unity Connection server and Cups server
       the version of cm1 and cm2 and unity connection is 8.6.2-21900
      the version of cups is 8.6.4
3. the issue occurrenced when the ip phone user 5412 call to 5411 but no answered, user 5412 sent a
      voice mail to user 5411，only MVI of the ip phone 9951 with dn 5411 turned on but jabber client wihtout any prompt message
      but when the user 5665 which registered on cm1 called user 5411 and sent a voice mail , status in normal,
      mvi turned on , the jabber client also can recived the prompt message and the the vocie mail could be played on the jabber client
      what's the issue probably be caused by & how can i solve it
      need your help!!!!

I don't know if you have a specific subnets permitted in the CUPS ACL
This is dangerous and incorrect guidence. The Incoming ACL allows the addresses defined to bypass authentication. In other words, I could impersonate your CEO if I wanted to. There are only two common use cases where doing this is appropriate: 1) the CUxAC server IP; or 2) older versions of CCX where CAD didn't support DIGEST authentication.
As for the original question: your English is difficult to understand. Is the following problem statement accurate?
When 5412 on CM2 leaves a voicemail for 5411 on CM2, the MWI is lit for 5411 but Jabber does not reflect the waiting message?
If this is accurate, is the message also shown in the Web Inbox? https:///inbox
The serverIP should be the CUC server defined in the voicemail profile on CUPS for the user who owns 5411.
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

Cisco Jabber for Windows Client SDK

Is there an SDK for Cisco Jabber for Windows client? I could only find the Web SDK. Are there no other SDKs that would let me control features of the Jabber Windows Client?

And in order to avoid TAPI limitation, they say they have started using Jabber which controls all phone functionalities through an Application User connected to the Call Manager.
Assuming they are referring to the normal Jabber for Windows/Mac/iOS/Android applications then this is wrong. Jabber - the client, not the IM&P servers which are part of the CUCM cluster (if you're familiar with Lync consider CUCM+IM&P servers a Front End Pool) - do not use an Application User at all. When a user starts Jabber, assuming SAML SSO is off, they supply an email address. This is used to find the servers via DNS SRV records, or the Mobile and Remote Access Expressway (roughly analogous to a Lync Edge pool) to tunnel through the firewall. After the email address they are prompted for their End User username and password. This is then used to access several APIs on the server, namely the User Data Service to discover what the user has. This would include what the user has configured/available to them. After this is done the Jabber client does one of three things with respect to phone functionality:
If the user has no phone devices provisioned for them - physical or software - it becomes an IM&P client only.
If the user has a software phone phone provisioned, it registers as that using SIP. In this way Jabber is the actual phone. This is called a CSF device for Jabber Windows/OS X.
If the user has a desk phone assigned to their End User account AND administrative policy is to default to desk phone control, it registers to CTI Manager on the CUCM server to control the user's physical phone.
A user can toggle between option two and three, if appropriately provisioned, but cannot have both simultaneously. In other words, Jabber is either controlling a physical phone over CTI or is a phone itself using SIP. The difference is where the audio/video media is sent from/to.
All of this happens using that human's End User credentials.
Now, if you wanted to have a server control the user's phone - either a physical one or Jabber - you would use the TSP as an interface to CTI Manager on the CUCM server and receive real-time events (e.g. the user went off-hook, the phone is ringing with this caller ID, etc.) and issue commands to that phone (e.g. make a call to X). This is done using an Application User account because the server would need to do this for multiple users simultaneously. If you also use the Super Provider concept, the CUCM administrator doesn't have to take the extra step of associating every phone to your Application User manually. Instead, you can simply issue CTI subscriptions to see any/all device activity you want.
This is all assuming you wanted to do the integration server-side to avoid having to update the Cisco TSP application on every user PC (which also limits your WPF application to machines capable of running the TSP) every time the CUCM administrator patches the servers. If you don't care about that, then you can do this all client-side on the user's PC, and have them supply their End User credentials.
Of course, you could also reconsider the Jabber SDK and just embed the make/receive call functionality directly into your application instead.

Jabber for windows client

Does jabber for windows work on terminal servers? I have client installed on terminal server, and all it does is spin like it is connecting to authenticate.
Sent from Cisco Technical Support iPad App

Virtual environments
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_01000.html#reference_B1477134C1A14086B4C9B7BD3A2EAE7D
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Jabber for Windows - Outlook Meeting integration issue/questions

Hi,
A couple of questions if anyone else has experienced or can answer:
1. When you turn on Jabber it appears in the trace file to create a transitionlist of meetings in your calendar for the next four hours. Eg if meeting 8-9 it will show 8:00 BUSY
9:00 FREE
and this works ok. This transitionlist also seems to update each time a status change occurs from what I have observed.
The problem we seem to have is if I open Jabber at 7.45am and have a meeting 8 - 9 then it shows "In a meeting", then if I create a meeting at 9.15am for 10am-10.30am, the meeting status does not change as it seems to operate of the four hour transitionlist. I have the setting in the CUPS server for exchange sync to happen every twenty minutes, but this does not seem to update.
I'm be focussing on the wrong area but basically not all calendar appt's update status in Jabber, especially the one's created within the four hour pperiod.
2. To have the presence status of a person in an Outlook email address field, do you need 2010 or does it work with prior versions, we currently operate 2003. I have configured the SIP component in AD, but no status or click to call facility from Outlook.
Thanks in advance
Mal

Hi Mal,
Thanks for your post. Issue (1) sounds like a configuration issue in your setup. Please open a TAC case for further assistance.
Regarding (2), Jabber for windows does noot support Office 2003. List of supported MS Office applications is listed in Jabber for Windows administration guide.
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Windows/9_0_1/b_jabber_win_icg_chapter_01000.html#reference_AC2F9334FEC54DA98861EB52944C6F08
Thanks,
Maqsood

Jabber for windows 9.7 photo issue

Hello,
I'm facing an issue with corporate photos on Jabber version 9.7. Before, with version 9.2 i had the same problem but after add an entry on the file jabber-config.xml the corporate photos were already shown.
What can be the cause for this behaviour with version 9.7?

Hi Amit,
Hope you're doing well. Guess the problem is solved. We installed this new version 9.7 of jabber on a machine with Windows XP OS. After reviewing the Cisco Jabber for Windows 9.7 Release Notes I noticed that the only available Operating Systems for jabber 9.7 are:
Operating System Support Cisco Jabber for Windows 9.7 supports the following operating systems:
•Windows 7 (32 bit and 64 bit)
•Windows 8 (32 bit and 64 bit). Note: Metro Interface and Windows 8 RT are not supported.
•Windows 8.1 (32 bit and 64 bit). Note: MediaNet (including deskphone video feature) does not currently support Windows 8.1
Thanks a lot!

Jabber for windows 9.2.6 client

hi
i have just upgraded some of my cisco jabber for windows clients to the latest release 9.2.6 (upgraded from 9.2.3)
i noticed that the first time the client startsup i get certificate warnings for our CUCM-PUB, SUB, CUC device and CUPS server. (all version 8.6)
all use the standard cisco SSL certificate (have not deployed 3rd party SSL certificates)
is there a way to get all these certificates trusted by the client machines, it has never prompted me before and works fine with 9.2.3
on the mac clients i have added them to the keychain when i first deployed the clients (manual job) but i like to see if i can automate this for my 30 windows clients (the users will not click on this themselves and will use it as an excuse not to load jabber (they don't like the call window pop ups but that is something for jabber 9.6 client
any idea how to get these certificates trusted by the windows computers (we have an 2008 r2 active directory so could do something with an group policy and or use our own internal windows certificate authority)
many thankss

when i run show web-security i get this
admin: show web-security
Version: V3
Serial Number: 441991719279266168307794
SignatureAlgorithm: SHA1withRSA (1.2.840.113549.1.1.5)
Issuer Name: CN=mydomain-CA, DC=mydomain, DC=com
Validity From: Mon Oct 28 15:32:30 GMT 2013
           To:   Wed Oct 28 15:32:30 GMT 2015
Subject Name: CN=uk-cucm-pub.mydomain.com, OU=IT, O=mydomain, L=London, ST=London, C=GB
Key: RSA (1.2.840.113549.1.1.1)
    Key value: 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
Extensions: 7 present
     Extension: ExtKeyUsageSyntax (OID.2.5.29.37)
     Critical: false
     Usage oids: 1.3.6.1.5.5.7.3.1,
     Extension: KeyUsage (OID.2.5.29.15)
     Critical: false
     Usages: digitalSignature, keyEncipherment,
     Extension: SubjectKeyIdentifier (OID.2.5.29.14)
     Critical: false
     keyID: 8e9c68b7e4acc73c6734b1df3d9ca0a7ccb7183d
     Extension: AuthorityKeyIdentifier (OID.2.5.29.35)
     Critical: false
     keyID: 88c4622540d7efbbdac1af207249c77c287f9c6c
     Extension: CRLDistributionPoints (OID.2.5.29.31)
     Critical: false
     distributionPoint
        fullName: 1 names
          1) ldap:///CN=mydomain-CA,CN=UK-CA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=mydomain,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint (uri)
     Extension: AuthorityInfoAccessSyntax (OID.1.3.6.1.5.5.7.1.1)
     Critical: false
     accessMethod: 1.3.6.1.5.5.7.48.2
     accessLocation: ldap:///CN=mydomain-CA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=mydomain,DC=com?cACertificate?base?objectClass=certificationAuthority (uri)
     Extension: (OID.1.3.6.1.4.1.311.20.2)
     Critical: false
     Value: 04141e12005700650062005300650072007600650072 ]
Signature:
lots of text
]-----BEGIN CERTIFICATE-----
certificate characters
-----END CERTIFICATE-----
no sign of subject alternate names in those details so am not sure how i would change this
on your cucm system are your host details listed as ip address or host name, mine are listed as ip address and perhaps the certificate mismatch is caused by these settings?
Host Name/IP Address Description
10.33.2.20 PUBLISHER
10.33.2.21 SUBSCRIBER 1
if the cucm servers were listed as uk-cucm-pub or uk-cucm-pub.mydomain.com and uk-cucm-sub.mydomain.com perhaps it would accept the certificates
web-security
Version: V3
Serial Number: 441991719279266168307794
SignatureAlgorithm: SHA1withRSA (1.2.840.113549.1.1.5)
Issuer Name: CN=Accel-CA, DC=accel, DC=com
Validity From: Mon Oct 28 15:32:30 GMT 2013
           To:   Wed Oct 28 15:32:30 GMT 2015
Subject Name: CN=uk-cucm-pub.accel.com, OU=IT, O=Accel, L=London, ST=London, C=GB
Key: RSA (1.2.840.113549.1.1.1)
    Key value: 3082010a0282010100d2a01565f2533b3602158e83fede75fef2751aa957902e0e556e814bb7e6aaed5d5138b6cf3d87d59f5c4be2740ab9f5dc3318a34ab551daa817f6ccd562c3c628f75ef278ed81bbd816ec44d178da86850c3bdd74b727cde092616e7674785c45efc88e98ba4d89da97fc92ac2901f41c23ed692460a1d64c171a6d5613dfe2e1bab2b82f5f1a5d9fe55b067e858a0d2cd48a8be59c9e54cccdac1238acd2738128626252b3e69198fc852217f930d6cd2bc6a3481452be355bae6c6ccfc7d5e86a39ff7b0304cfb53e1555ccc8c4224cf661f912946b4e0db2926991d704f65cd92546155048cecb0f11c5046f743434d1577cbb4c175611acdf2fbf33bfb30203010001
Extensions: 7 present
     Extension: ExtKeyUsageSyntax (OID.2.5.29.37)
     Critical: false
     Usage oids: 1.3.6.1.5.5.7.3.1,
     Extension: KeyUsage (OID.2.5.29.15)
     Critical: false
     Usages: digitalSignature, keyEncipherment,
     Extension: SubjectKeyIdentifier (OID.2.5.29.14)
     Critical: false
     keyID: 8e9c68b7e4acc73c6734b1df3d9ca0a7ccb7183d
     Extension: AuthorityKeyIdentifier (OID.2.5.29.35)
     Critical: false
     keyID: 88c4622540d7efbbdac1af207249c77c287f9c6c
     Extension: CRLDistributionPoints (OID.2.5.29.31)
     Critical: false
     distributionPoint
        fullName: 1 names
          1) ldap:///CN=Accel-CA,CN=UK-CA,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=accel,DC=com?certificateRevocationList?base?objectClass=cRLDistributionPoint (uri)     [
     Extension: AuthorityInfoAccessSyntax (OID.1.3.6.1.5.5.7.1.1)
     Critical: false
     accessMethod: 1.3.6.1.5.5.7.48.2
     accessLocation: ldap:///CN=Accel-CA,CN=AIA,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=accel,DC=com?cACertificate?base?objectClass=certificationAuthority (uri)
     Extension: (OID.1.3.6.1.4.1.311.20.2)
     Critical: false
     Value: 04141e12005700650062005300650072007600650072 ] Signature:
0000: 90 e8 32 00 2e f3 58 ec 18 20 6d 54 0a 49 9c ce [..2...X.. mT.I..]
0010: 94 90 02 6e 2f 15 1e f2 c3 6c 45 96 14 8e ff 25 [...n/....lE....%]
0020: 39 db 50 08 03 3b 48 a3 c7 69 7a 03 76 d1 e3 3d [9.P..;H..iz.v..=]
0030: 73 94 08 7c d3 13 f2 7c 58 ff ba 26 47 ed 6a 50 [s..|...|X..&G.jP]
0040: 9d 80 f8 64 cc dd 34 9f 95 32 3f 7f 32 04 f4 8b [...d..4..2?.2...]
0050: 86 e3 9d 23 03 06 06 ad f2 1b e0 0a a6 ed c0 3d [...#...........=]
0060: d4 dd 57 0f 61 d3 2b 14 d1 d0 3e c4 3a e3 df ac [..W.a.+...>.:...]
0070: c7 b8 dd 37 ba e2 e6 aa 35 a1 9b 7d 27 b8 d0 5a [...7....5..}'..Z]
0080: d9 cc d9 89 90 e0 72 de b1 32 4d d2 fc c8 2e c0 [......r..2M.....]
0090: a1 f9 57 8e b7 9d 1d 00 d8 a8 4d 26 ed c6 92 f6 [..W.......M&....]
00a0: 99 7a 1c ee 58 8d 76 20 7b af a1 54 0b 57 c3 d3 [.z..X.v {..T.W..]
00b0: 92 1f 64 d0 04 22 ae 17 c2 2a 1d d1 83 e0 c3 85 [..d.."...*......]
00c0: 67 4e 94 67 65 e8 e2 39 87 ef 78 f7 41 7e bd 34 [gN.ge..9..x.A~.4]
00d0: 79 8d be ae 45 5c 56 73 1d 6c 02 bf 3a 93 b4 a9 [y...E\Vs.l..:...]
00e0: f8 80 76 f1 ad 42 6e 42 cd 54 00 1e ca c5 b8 98 [..v..BnB.T......]
00f0: 05 a4 dd 3c 89 47 7b 4a 61 af 4b 32 2c 0c 96 a6 [...<.G{Ja.K2,...]]-----BEGIN CERTIFICATE-----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==
-----END CERTIFICATE-----

Jabber for Windows 9.2.2 Client - No Meetings on Options

We have an on prem deployment of CUPS 8.6.4 with Jabber for Windows clients. Everything is working as desired with the exception that we don't have the "Meetings" available under File > Options.
Here's what my jabber-config.xml file reads. Everything I see in the documentation, this should enable the Meetings Option, but it's not available.
<BEGIN CONFIG FILE>
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Presence>
   <PresenceServerAddress>x.x.x.x</PresenceServerAddress>
   <PresenceServerDomain>xxxx.org</PresenceServerDomain>
</Presence>
<Directory>
   <PrimaryServerName>xxxx.xxxx.xxx</PrimaryServerName>
</Directory>
<Policies>
   <Meetings_Enabled>true</Meetings_Enabled>
</Policies>
<Options>
   <Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
   <ShowContactPictures>false</ShowContactPictures>
</Options>
</config>
<END CONFIG FILE>
Anyone have suggestions?

Hi Mark,
There was a known issue with missing meeting tab in pre-released version of 9.2.2:
CSCuh19703
Can you check exact version of your Jabber? (9.2.2.2526 should have this fixed )
Also please tell me from which config file is this snapshoot?

Configuration of IM Address Field in Jabber for Windows 10.5

Hey Guys,
Quick Overview of my setup:
Jabber for Windows 10.5
CUCM 10.5
IM and Presence 10.5
Microsoft Active Directory on Windows Server 2012R2
LDAP Integration via EDI with Directory URI Attribute set to "mail"
Voice Services Domain is different from the Active Directory Domain
I'm having problems getting the Jabber for Windows client to display the correct IM Address when looking up a user. The Cisco documentation for configuring this is a little mystifying, but I finally tracked down the the jabber-config.xml line "<UserAccountName>mail</UserAccountName>" under <Directory> but setting this causes some strange behaviour where the IM address becomes [email protected]@voiceservicesdomain.com.
If you leave the field empty then the client resolves [email protected] Now I have set the Directory URI in CUCM to be the "mail" attribute, and I have synced this with the users but this is ignored by the Jabber Client. The IM and Presence server is set to use Directory URI as well.
The only way I have managed to get the correct IM Address to display is to set another Active Directory Attribute field to "firstname.lastname", for example you set the "ipPhone" attribute in Active Directory.
According to the Documentation this should work, but does anyone know why the client insists on using either [email protected] or when set to email it insists on suffixing "@voiceservicesdomain" to the IM Address?
Interested to see who else is hitting this issue.
Cheers,
James

Hi James,
we have exact the same problem. Did you find a solution for the problem?
Regards
Frank

Jabber for Windows 9.0.1 phone control of Cius?

Can the Jabber for Windows client control a Cius like it can a 79XX phone?

Jabber for Windows 9.0(1) will not be posted automatically for all customers.
An internal communication will be issued to all internal CSM's and PSM's in the next couple of days explaining the exact procedure for requesting access to the client and how to raise the ops request to make it available for the customer org in question ... so reach out to the your Partner manager to understand that procedure and to enable access for your customers.
Regards,
John

Cisco Jabber for Windows User Photos

CUPS 8.6.3
Jabber Client for Windows Version 9.0.1 Build 8802
I noticed that the Cisco Jabber for Windows Client does not automatically update with the photos that updated in Active Directory.
I had updated a user's photo in AD and noticed that it would not change. I browsed to "C:\Users\<user name>\App Data\Local\Cisco\Unified Communications\Jabber\CSF\Photos" and had to manually delete the user photos in this folder. I exited out of the Jabber Client and restarted the program. When I did this, the Jabber Client crashed, I saved the crash report, and re-opend the Jabber client. This time the client opened properly, and the updated photos were now appearing!
Seems like Cisco would not have set the photos to Cache to the local computer....
Any thoughts?

Yes, Here is a sample .xml script.
<?xml version="1.0" encoding="utf-8"?>
http://www.cisco.com/CiscoJabberSetup.msi
          Cisco
          http://www.cisco.com/web/fw/i/logo-open-graph.gif
          http://www.cisco.com
          Cisco Jabber for Windows
          http://server_name.cisco.com/jabber.png
          http://www.cisco.com/en/US/customer/products/ps12511/tsd_products_support_series_home.html
          Cisco Jabber
          http://server_name.cisco.com/jabber.png
          http://www.cisco.com/web/products/voice/jabber.html
EDI
1
YOURDOMAINCONTROLLER
389
0
ldapaccount
ldapaccountpassword
dc=XXXXXXX,dc=XXXXXXX,dc=com
ipPhone
True
sAMAccountName
http://www.yourinternalwebserver.com/User%20Photos/Profile%20Pictures/sAMAccountName.jpg
true
true
.exe;.msi;.rar;.zip;.mp3
false
presence
The bold is how we pulled photos from a directory on a web server
If you don't have IIS running on a server you can replace
http://www.yourinternalwebserver.com/User%20Photos/Profile%20Pictures/sAMAccountName.jpg
with
\\Your server\c$\PhotoFolder\sAMAccountName.jpg

Jabber for Windows LDAP Profiles

I have been unable to find a lot of information on LDAP profiles, but I came across a blog that said that LDAP profiles are only used for Android, iphone and ipad. It stated that the only way to control the search base on Jabber for Windows is by using the jabber-config.xml file. So far this appears to be true based on my limited testing.
I have been able to integrate with OpenLDAP using the jabber-config.xml file to set the server and search base. The only problem i can see with this particular design is I would have to give all users the same LDAP profile and search settings. In our environment this will not satisify our requirements.
Does anyone know of a way where i can integrate with OpenLDAP, use the Jabber for windows client and control the LDAP search setttings on a per user basis?
Thanks

Yes but you won't like it.
Group Configuration File NamesYou specify the name of the group configuration files in the Cisco Support Field on the CSF device configuration in Cisco Unified Communications Manager.If you remove the name of the group configuration file in the CSF device configuration on Cisco Unified Communications Manager, Cisco Jabber for Windows detects the change, prompts the users to sign out, and loads the global configuration file. You can remove the name of the group configuration file in the CSF device configuration by deleting the entire configurationFile=group_configuration_file_name.xml string or by deleting the group configuration filename from the string.If users have desk phone devices only, use the following command line argument to specify unique names configuration files for different groups: TFTP_FILE_NAMESee the Install Cisco Jabber for Windows chapter for more information about the command line arguments.
Please remember to rate helpful responses and identify helpful or correct answers.

Jabber for windows can't play voice mail

hello everyone....
i config jabber with Unity Connection
now i can receive a voice mail form jabber ,all is right ..but i can't play it
if i login the voice mail i can hear the voice mail......only can't play form jabber ...
my jabber client is 9.2 and CUCM 9.1 Unity Connection 8.62 CUPS 9.1

We have the same problem with Jabber for Windows 9.2.
It is interesting that the voicemail feature seems to work for a few seconds when the client starts up. At this time I can see all of voice mails, and the number of unread voicemails shows as a number where the voicemail icon is, but then they all disappear. The voicemail tab then shows the message, "Cisco Jabber is not connected to your voicemail server".
The 'Call voicemail' button works.
I understand that our server has been setup for TLS, and that the voicemail tab in Jabber for Windows 9.1.5 works.

Jabber for Windows- VM issue

I had configured Jabber for windows in windows 7, the problem is after logging into jabber client iam not able to get the "phone accounts" under options.
Iam able to call , and recieve calls but no voice mail. In the Jabber cleint diagnostic it shows username and password is wrong for voice mail.
If i have 'phone acounts' option in jabber client i could set username and password for voice mail. Iam able to telnet the unity server.
Any clue?
We have IM&Presence 9.0, CUCM 9.0
Jabber - 9.2
Tnx
Bobby

HI,
As Aron states - you can configure your client to use same login and password ID as other UC services. This will then mask the fields you see in your jabber client. This is great when you don't want your users to have to populate the fields. The less they have to do the better.
Check your Unity Connection system - is it AXL ot AD or neither ?
If you can, your better to use only one username / password across your UC environment. For now just check your setting for the VM service is not set .

Cisco Jabber for Windows Voicemail issue

At this I'm in processing of implementation Cisco Jabber UC solution for big Company.
I use CUCM 9.1.2, Cisco IM and Presence 9.1.2, CUC 9.1.2, Cisco Jabber for Windows 9.6.1.
I have issue in Cisco Jabber with VoiceMail Integration - when I leave voice message for any user,
than this message is arrived only him Cisco IP Phone, but not in him Cisco Jabber.
From Cisco Jabber Connectivity status in help menu I see that VoiceMail service is successfully connected
and I see VoiceMail button in Cisco Jabber.
How can I resolve this issue?

Have you configured the UC Service profile on CUCM with both Voicemail server and mailbox servers?

Jabber for Windows 9.2 deskphone control issue

Hi experts,
I'm having a problem with the newly installed Jabber for Windows 9.2.0. When I click on the bottom right "control phone" and select my Cisco 7941 it fails. I tried restarting the Cisco CTIManager service with no luck.
Deployment:
IM&Presence: cloud (Webex service)
CUCM version: 8.6(2a)
LDAP integration: full (with authentication)
Deskphone control was working prior the upgrade of Jabber for Windows. Everything else remained the same version.
Using Jabber softphone as a client still works fine.
CUCM ENd User is correctly configured.
Wireshark trace of my Jabber for Windows 9.2 client communicating with CUCM when attempting to control my deskphone shows the following:
Username: filippo.zangheri
Password: checked three times (it is correct because Jabber softphone works fine).
Any hint?
Thanks.
Filippo

Davide,
I know i am kind of late to the party on this one but i have fixed my issue and wanted to give you the information to see if this will work for you. If this is even still an issue?
I too had the same issue and just like you i confirmed everything was correct however I discovered something when I was looking into my End User profile on the CUCM. I had originally swapped my 7971 phone with a new 8945 phone and I had both phones associated with my line for a while before I removed the old 7971.
My End User profile still had both phones associated with my number even though the 7971 phone had been removed from my line. This was not allowing the CTI to connect to my 8945 phone or allow my jabber client to "Control Phone" properly because it couldn't figure out which phone to control. I went into the CUCM and physically deleted the 7971 phone from the system which released the associated phone in my End User profile. Once I did that, I "Control Phone" in my Jabber client and voila it worked like a charm!
To make sure I didn't have any Jabber client issues after doing this i signed out of my Jabber client and deleted the local system profile for the Jabber client and then signed back into Jabber and let it recreate the profile. Once that was done i have not had any issues with my Jabber client controlling my phone and all functions work perfectly.
Hope this helps...

Jabber for Windows client Voice Mail issue

Similar Messages

Maybe you are looking for