Jabber iPad - Voice Mail Pilot Number

Hi All,
We are testing with Jabber ipad & logged in Presence Account.We have logged in the Voice & Video account as well.
i couldn't get any number in " Call Voicemail " option. Voicemail configured & profile subscribed for this user in CUCM & CUPS.

Hello,
Were you able to solve this issue? I am facing the same problem and I can not find any relevant document. I mean the voicemails should appear here like they do on Jabber for Windows, right? Even in jabber for iphone this works fine.
Any help would be greatly apprecited.
Best Regards,
Robert.

Similar Messages

  • How do I get my voice mail acces number?

    I do not have my cell phone with me right now, but I need to check my voicemails left on my cell phone.  How do I do that?  What telephone number do I call to retrieve my voicemail left on my cell phone?  I am located in Hackensack, NJ.  My phone is monthly to monthly Black Berry Bold.

    Just call your own 10-digit number from any phone, and when your voicemail greeting starts to play, press #. It will prompt you for your password, and from that point it's as if you were calling from your phone.

  • Cannot delete voice mails

    CAN'T DELETE VOICE MAILS!!
    When I try to delete them online, I'm told the "mail box is in use" (it isn't) and to call the support#.  They tell me to try deleting them via the phone. That tells me "your records aren't available".
    This is really annoying-can anyone advise how to fix this "black hole"?

    So you can see them online, play them but not delete them?   or you can't play them either?
    And when you call into the voicemail number - are you saying you can't access your voicemail at all? 
    if you can't access over the phone, then that will be the first thing you want to fix, so use the following two links. 
    Get Voice Mail Access Number
    Reset Voice Mail Passcode

  • Cannot retrieve voice mail

    Hi folks, does anyone have the time and savvy to advise me?Often times, I cannot retrieve my voice mail. I can see the voice mail and the number of seconds it lasts.  But when I click on the voice mail, the number of seconds goes to zero, and no message plays.  This happens more and more often.  I googled and found a person who said go into the app file.  He described a procedure that involved deleting the .dat files.  I did that, but i am not sure i did it correctly, as it did not help.If i fail to retrieve the voice mail the first time, i never can get it to retrieve.  Windows 7 ultimate, laptop

    I have not contacted support. That is my last resort, I usually get much better help for obscure PC issues from 'regular' folks on forums. I call support for things that are clearly Verizon issues. I'm betting they will just read me the system requirements and tell me to either use Internet Explorer or contact my PC/Operating System support . I'll search around a few more days before I call.

  • More rings before voice mail.

    How do I get more rings before the phone goes to voice mail?

    I assume that you want to divert your voice calls when you don't answer your calls. In that case you should select Forward if Not Answered then use the following GSM string: *61*[Phone Number]*11*[Time]# In place of phone number put in your voice mail box number and in place of time put any value i.e. 5, 10, 15, 20, 25 or 30. These values are seconds after which your calls will be diverted/forwarded to voice mail. Setting a higher value will meet your query.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Jabber call to voice mail fails with fast busy over VPN

    I have an issue that I ran into with CIPC phones over a VPN.  If a CIPC phone called over a VPN and started ringing a phone the call would fail with fast busy at the time the call would be forwarded to voicemail.  I found the issue was when remote the CIPC phone would negotiate the g.729 codec, when forwarded to a voicemail pilot over a SIP trunk set to g.711 the call would fail due to codec missmatch when no transcoders are present.
    So now I am running into what I believe to be the same issue with Jabber, when on premise the calls to voice mail work just fine, but when remote they fail.  I can directly call the voicemail pilot without error, but if calling a phone the call gets fast busy at the point we are forwarded to voicemail.  Even though all my regions are set to talk to all other regions on G.711 and the voicemail SIP trunk is set to G.711, I believe with the new features in CUCM9 that a lower speed codec has been negotiated since the we are going over the VPN, or Jabber has done this as it knows it's over VPN (not sure).  WIth CIPC I could go into the settings and turn off the Optimize for Bandwidth check box and the call would negotiate G.711.  With Jabber I can't find anything that would tell my Jabber client to stay on G.711 and I can only imagine this is a codec missmatch as the following are true.
    1. CIPC and Jabber share the same line
    2. VPN established and CIPC optimised for low bandwidth un-checked
    3. Over the same VPN the CIPC phone can leave a voicemail
    4. Over the same VPN the Jabber client gets fast busy once forwarded to voicemail
    5. Voicemail environment is Exchange-UM over SIP trunk
    6. SIP trunk is assigned a Device Pool, that is assigned to a region that all other regions communicate G.711 to
    7. On CIPC if optimised for low bandwidth is checked I get the exact same issue as I get with the Jabber client (fast busy when forwarded to voicemail)
    Would anyone know what I can do in CUCM 9 to fix this issue, as said no issue when all devices are on premise.  Wondering if there is a service parameter or a way to change the codec selection so the Jabber client attempts to always negotiate G.711.  The correct answer would be to get some PVDM DSP resources and kick up a transcoder in my resource group, and that may be what I talk them into doing if I have no other options.                  

    We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year!  Every time I call in to report it they 'escalate' the issue but it never gets resolved.  The problem seems to be in the initial connection.  Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal.  I get the same message when I call back:  “I’m sorry – that account is in use at this time.  Please try again later!”  I have even called in with my cell phone and get the same message!  I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later.  If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.”  This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!!  I wonder how many people have the problem and just don’t bother reporting it because of the hassle?  When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!!  NEVER let them talk you into that!!!  It’s their problem and they need to fix it!!!!!!!  I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract!  Good luck if you have Verizon………

  • Jabber for windows can't play voice mail

    hello everyone....
    i config jabber with Unity Connection
    now i can receive a voice mail form jabber ,all is right ..but i can't play it
    if i login the voice mail i can hear the voice mail......only can't play form jabber ...
    my jabber client is 9.2 and CUCM 9.1 Unity Connection 8.62 CUPS 9.1

    We have the same problem with Jabber for Windows 9.2.
    It is interesting that the voicemail feature seems to work for a few seconds when the client starts up. At this time I can see all of voice mails, and the number of unread voicemails shows as a number where the voicemail icon is, but then they all disappear. The voicemail tab then shows the message, "Cisco Jabber is not connected to your voicemail server".
    The 'Call voicemail' button works.
    I understand that our server has been setup for TLS, and that the voicemail tab in Jabber for Windows 9.1.5 works.

  • Jabber for Windows client Voice Mail issue

    hi, cisco guys
        i have a collaboration test for my customer in resent days.
        the follow picture is the topo of my test system
       1.  cucm1 use ICT non-GK trunk to connected with cucm2 and the ip phones with dn 56xx registered on cm1
        the iphones and jabber clients with dn 54xx registered on cm2
       2. cm2 intergrated with Unity Connection server and  Cups server
           the version of cm1 and cm2 and unity connection is 8.6.2-21900
          the version of cups is 8.6.4
      3.  the issue occurrenced when the ip phone user 5412 call to 5411 but no answered, user 5412 sent a
          voice mail to user 5411，only MVI of the ip phone 9951 with dn 5411 turned on but jabber client wihtout any prompt message
          but when the user 5665 which  registered on cm1 called user 5411 and sent a voice mail , status in normal,
          mvi turned on , the jabber client also can  recived the prompt message and the the vocie mail could be played on the jabber client
          what's the issue  probably be caused by & how can i solve it
          need your help!!!!

    I don't know if you have a specific subnets permitted in the CUPS ACL
    This is dangerous and incorrect guidence. The Incoming ACL allows the addresses defined to bypass authentication. In other words, I could impersonate your CEO if I wanted to. There are only two common use cases where doing this is appropriate: 1) the CUxAC server IP; or 2) older versions of CCX where CAD didn't support DIGEST authentication.
    As for the original question: your English is difficult to understand. Is the following problem statement accurate?
    When 5412 on CM2 leaves a voicemail for 5411 on CM2, the MWI is lit for 5411 but Jabber does not reflect the waiting message?
    If this is accurate, is the message also shown in the Web Inbox? https:///inbox
    The serverIP should be the CUC server defined in the voicemail profile on CUPS for the user who owns 5411.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Jabber can not enter the PIN for voice mail

    I installed Cisco Jabber 8.6 on the android mobile,And registered jabber to CUCM8.0. In the same time, CUCM8.0 integrated with Unity Connection8.0 via SCCP, Everything is normal.
    Tested using any of a telephone call Jabber, it can received voice mail, and shows have a voice mail on the android mobile. then, Hear the tone of the Connection system :"please enter your PIN." However, in any case the PIN can not be submit to the Unity Connection, System reminded over and over again:please enter your PIN.......
    I guess the mobile's dial pad can not be supported by Unity Connection, Or other reasons.
    help!!!

    The Android client is a SIP device and uses RFC2833 for DTMF relay. Unity Connection supports RFC2833 when integrated with either SCCP or SIP. The first question that comes to mind: is the call invoking a transocder/MTP that would be in the media path? For example, if Jabber is using G.729 and you haven't enabled that on CXN or you're requiring a TRP.
    I would start with a Wireshark capture from the CXN server to see: a) what the far-end IP address is for the RTP packets; and, b) whether you see the RFC2833 packets arrive. If the sender IP isn't the Jabber client a media resource got invoked which may be dropping the RFC2833 packets. If the IP is correct but you don't see the RFC2833 packets arrive you could then run a Wireshark or collect SDI logs with SIP stack trace enabled from the CUCM node that Jabber is registered to. That would allow you to see the SDP negotiation at call setup to see if RFC2833 even gets negotiated.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Cisco Unity 7: Voice mail cann't get the name or Number phone of the caller

    Hi,
    I have installed Cisco Unity Messaging Unified version 7 and integrated with Exchange 2010.
    I have two scenario, and I want to know if are normal or not:
    1.       If the 2 IP phones are subscribed with Cisco Unity: the first IP phone call the other IP phone and let a voice mail. When the second IP phone check his message vocal it can get the name of the caller or his number phone (the message is: You have One message from XXXX) and he get e-mail as objet: Voice Mail from XXXX.
    2.       If one IP phone is not subscriber with cisco unity call other Ip phone subscribed with cisco unity and let him a voice mail. The second IP phone when check his message vocal it can’t get the name of the caller or his number phone: The message is: You have one voice mail xxxx; without indicate from!! and he get a e-mail as object: Voice mail from Unknown.
    Please, I want to know if the second scenario is normal ? if not, who to resolve this problem? I want that he indicate the number of caller same he isn't subscriber with cisco unity?
    Thanks a lot,
    Best regards,
    Omar YUNSI

    So for the 2nd scenerio you would want to check what your Message Subjects were set to.  For Unity 7 open Web SA, click Configuration and then Message Subjects.  Make sure that the Outside Caller Message has %CALLERID% in it somewhere.  The value %CALLERNAME% will return unknown if we do not receive a name from the PSTN.
    Try setting the Outside Caller Message to:
    %U% %P% Voice Message from %CALLERID%
    and that should get you your desired results.
    The default Message subject is:
    %U% %P% Voice Message from %CALLERNAME% (%CALLERID%).  So with that it would say Voice Message fom Unknown (xxxx) if it was not able to determine the name of the user which is usually normal from a PSTN call.
    Just to note, the From address is always going to say from Unity Messaging System, it will only be the subject that has the extension in it.
    Bryan

  • Jabber voice mail for some users.

    Dears,
    J4W voicemail works perfect with default config.xml file for some of the users and for some of the users it shows the attached when clicked on voicemail tab. I have create 2 no's of sevice profile, the voice mail credential set  for both service profile is Unified CM IM and presence.
    I can understand the prompt as it is asking for voicemail password for that reason i have to create a custom config.xml file and i have to upload in TFTP server, But my concern is why it is working for some of the users without config.xml file and for some users it is prompting for username and password.
    Thanks

    Dears,
    the profile are different, but if i put the the other users working profile also it is not working.
    The voice mail server is showing not connected in jabber,
    Any hints.
    Thanks

  • Jabber voice mail failover

    Dear,
    I have publisher and subscriber for unity connection 9.1, whenever the UN PUB fails voice mail doesnt work in jabber for windows for subscriber,
    i telnet to  port    telnet <unity connection> 143 and i m able to telnet on IMAP and also on port 443 of voicemail server.
    Any hints please.

    this is an enhancement documented here; https://tools.cisco.com/bugsearch/bug/CSCud63427/?reffering_site=dumpcr
    please rate if this helps.

  • How can I get ALL voice mail recordings off my number?

    We use RingCentral to get simultaneous ring between our home and Verizon cell phone. But what was happening, was that the voice mail on my Verizon cell would pick up before I could get to the home phone, then no one would be there. We were losing clients for our small home business.
    So I asked Verizon to take ALL recordings off the cell phone account. Instead, NOW clients are calling, and before I can answer the home phone, they get a recording on my cell, saying that the mailbox is not set up!
    I called Verizon tech support today and the guy could NOT remove ALL recordings from my account, he said I had to do it myself, but I don't know HOW! That was why I called THEM!!!
    When someone calls us, I JUST want the Verizon wireless to ring FOREVER, unless I answer it, and NOT to go picking up with stupid recordings, before I can get to my home phone!

        MamaBear2014,
    I am sorry to hear of the issues you are having. In regards to removing the messages from your voicemail on your phone you would have to dial *86 from your cellular device which will route you to the voicemail system and ask you to enter in your password. Once the password has been entered in you can go through and listen and delete the messages.
    As for wanting your phone to ring without being routed to a voicemail or receiving a recording that the voicemail box has not been set up, I apologize as we are not able to do that. On cellular devices there is not option to prevent the phone from going to voicemail. The system is set to have an set number of rings and then route to voicemail and this can not be changed. If you would like you can set up call forwarding on your cellular phone which will route your calls to your home system instead of going to voicemail. Check out the details here... http://vz.to/13Jdh5R
    LindseyT_VZW
    Follow us on Twitter @VZWSupport

  • How to change number of rings or time before it goes to voice mail on iphone 3g

    How do I change the length of time or number of rings on the iphone 3g before it goes into voice mail?

    Set by your carrier, so contact them.

  • Looking for App to dial phone number and pin to check voice mail?

    When I am checking my office voice mail remotely with my 3G iphone, I can go to favorites or contacts and dial my office phone number. But then I have to manually dial my office number plus #, then wait 4 seconds and dial my pin plus #. Also, I have to touch "Speaker" or the office voice mail will not hearing the touch tones.
    Is there an app that will dial the office number plus #, wait 4 seconds, then dial the pin plus # by pressing just one button? My treo had a dial feature that would dial my office voice mail number, pause 1 second per entered comma, plus pin by pushing only one button. Also, how do I make the office voice mail hear the touch tones without using speaker?

    Well you can enter pauses as well with the iPhone in your contact list saved number. As for the voice mail service not getting your key entries unless on speaker, not sure.

Maybe you are looking for