Jabber Phone Client iPhone 5 no audio

Here is the scenario:
I am working with an iPhone 5 with the Jabber Phone client installed on it
I am running CUCM 8.5 and the latest Jabber Phone client
I have the corporate wireless network configured on the phone and the phone is able to successfully connect to the wireless
I am able to successfully initiate a call from the Jabber Phone client to a phone within the corporation
I am able to successfully receive a call from a phone within the corporation to the Jabber Phone client installed on the iPhone
When trying to talk on the iPhone 5 using the Jabber client there is no audio from the iPhone. I have a similar setup on an Android phone using the same wireless network with no audio issues at all.
Does anyone know of any problems running the Jabber Phone client on the iPhone 5 with no audio coming from the iPhone?

I know its a old post, But did you find the solution. ?
I`m having a similar issue with an Iphone 4 running IOS 7.0.4. The iphone connects correctly and i`m able to make calls and receive calls , but there`s no audio. Only when i put the Iphone on Speaker i`m able to hear the call. I checked if there were restictions in place regarding the use of the microphone/audio for the application but there are none in place. The internal Phone its working correctly so i did rule out any Hardware issue, i also tested the profile on another Iphone 4 and it works correctly. This sounds like an IOS issue but i dont seem to find any information searching on the internet.
The current version installed is Jabber 9.2(5).

Similar Messages

  • IPhone 6. While talking on the phone, email interferes w/audio for other party. Email message pops-up on the screen and the other party cannot hear me until I click "close" & remove the message. Ideas??

    iPhone 6. While talking on the phone, email interferes w/audio for other party. Email message pops-up on the screen and the other party cannot hear me until I click "close" & remove the message. Ideas??

    Alex, thanks for the reply but it did not answer my question. I only want to turn off notifications & interruptions while I am on the phone. For this desired result, the only way the Do Not Disturb feature would help is if I manually turned it on before each phone conversation. Since my phone rings at random times, this is not possible. Basically, I just want to "opt out" of call-waiting. When I had a landline I never had call waiting. I don't want to be interrupted. But beyond that, even if I am being interrupted why are these notifications preventing the other party from hearing my voice?

  • Jabber for Windows / iPhone - issue with photo and search

    Dear community,
    I have an issue regarding Cisco Jabber for Windows as well as iPhone & iPad.
    I recently upgraded our Call Manager infrastructure from 8.6.5 to 10.0. Along with that, I wanted to rollout the new Jabber for Windows (9.7.2) because now we use a very old version (9.2.1).
    After I upgraded my test client, I noticed that the user photos (which are retrieved from active directory) were gone.
    So for the first time, I decided to modify the the jabber-config.xml (I attatched the two different versions).
    I used the jabber config generator to create the new version: https://supportforums.cisco.com/document/106926/jabber-config-file-generator
    My attempt is to achive these goals:
    1) I want one config file which is working with Jabber for Windows, iPhone & iPad, Android as well as Jabber for Mac
    2) I want a secure connection from the client to our directory server
    3) I want to retrieve the user photos from the active directory user (attribute thumbnailPhoto)
    4) Jabber should find only users which are a member of the active directory group "example" (example is a nested group which contains several users and at least _one_ other group). Until now, the whole active directory was searched for users/contacts.
    So far, 1) and 2) seems to work fine. 3) and 4) are the troublemakers and I really don't no why.
    Can somebody help me?
    Best regards,
    René

    Look at this thread. You can find the answer there.
    https://supportforums.cisco.com/discussion/12241391/ldap-contacts-and-photos-jabber-ipad-iphone-and-android-not-working
    First I had to uncheck "Use UDS for Contact Resolution" and then I had to create a new jabber-config.xml and upload it to the TFTP server.
    But there are a few limitations you have to deal with. But I have mentioned that in the other thread.

  • IPhone 5 audio jack problems

    My iPhone 5 audio jack seems like it's broken or something. Every time I put my headphones in and I move them a little bit the music either pauses, changes into a different volume , only plays on one side ,or sounds like static. Is is broken? If so can it be fixed? Also it isn't the earbuds since it did the same thing when I use a brand new pair!

    Bring your phone to Apple for evaluation.  If defective, it will be replaced (free of charge if within the warranty period)

  • Iphone 4s audio source problems

    Hi.  When I make a call using my phone (4S) and the audio source is either bluetooth or iphone, the person i'm calling can't hear me.  I have to switch to speaker phone instead.  Please advise.  Thanks

    I have a similar issue. I just installed a Jabra Drive and now, the default audio source is the Jabra...even when I am not near the device. When i answer a call, or make an outgoing call on my iPhone, I need to manually switch the audio source to the iPhone.
    This was never an issue with my Morotola H17 bluetooth ear piece.

  • IPhone 6 audio not working

    MY  iPhone 6 audio is only working when the ear phones are connected.

    Hi bigTom4,
    I'm sorry to hear you are having these issues with your iPhone. If you continue to have audio issues when connecting to your BMW's stereo via Bluetooth or USB, you may find the troubleshooting steps outlined in the following article helpful (apologies if you have already seen it):
    Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
    Regards,
    - Brenden

  • IPhone: XMPP/Jabber support in iPhone

    I wonder if anyone tried to implement jabber protocol on iPhone. There are several open source libraries that are available. Have anyone tried to integrate it into iPhone application. I would appreciate any input...
    Thanks.

    Iphone service is only valid in the original country of purchase.
    You will need to send the phone to someone you know in the US to be taken into Apple for service. Then they will need to ship the phone back to you. All shipping will be at your expense.

  • Jabber voice for iPhone 9.1.7 crashes on iPhone 5S

    Few users reported that Jabber voice for iPhone crashes on 5S after updating to latest 9.1.7 version. App loads, register to CUCM but crashes when using dial pad and application closes itself. App works on iPhone 4.
    Does anyone else have the same issue?

    The following error is reported via Console:
    iPhone ReportCrash[4722] <Notice>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/Jabber Voice_2014-05-19-083318_"removedname".plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0
    May 19 08:33:19 iPhone Jabber Voice[4724] <Warning>: Stderr redirected to: /var/mobile/Applications/0CDDD8A3-0BD0-40DA-AFCA-8B32C71B0187/Documents/Logs/Jabber Voice-2014-05-19-08331907-Console.log
    May 19 08:33:19 iPhone Jabber Voice[4724] <Notice>: (Error) [ABLog]: ABPeoplePickerNavigationController does not support subclassing in iOS 7.0 and later. In the future, a nil instance will be returned.
    Issue happens on iPhone 5S running 7.0.6 or 7.1.1 iOS. 

  • How can i get contacts from my old Nokia phone to iphone 4S

    how can i get contacts from my old Nokia phone to iphone 4S?

    Appreciate the reply thank you
    Issue being is I don't have the lead for the samsung any longer but have the memory card?
    An yes I know I need to get them onto my MAC but how is what i'm struggling with?
    Any help would be appreciated.
    Many thanks

  • How can  i find that a phone is iphone 4 or 4s?

    how can i recongnize a phone is iphone 4 or 4s ?

    Appearance-wise...
    On the left side of an iPhone 4s, there's a line above the volume buttons while on an iPhone 4, there's no line.

  • HT204406 Upgraded my phone to iphone 6 from iphone 4. My iTunes with all my music is on a computer that no longer works and can't access the music. Will iTunes Match allow me to get my music off of my iphone 4 and put it on my iphone 6?

    Upgraded my phone to iphone 6 from iphone 4. My iTunes with all my music is on a computer that no longer works and can't access the music. Will iTunes Match allow me to get my music off of my iphone 4 and put it on my iphone 6? Sorry about copying twice, new to this.

    Do you have iTunes match? You need a computer to manage an iTunes match library.
    Jim

  • When I send a text message to my friends Trac phone, my iphone 4s sends two text(even though I am under my 160 count).  He said that it sends one full text and a second with just one word.

    When I send a text message to my friends Trac phone, my iphone 4s sends him two messages(even though I am under my 160 count).  He said that the first message is full and the second one is only one word.  Can anyone help me with this?

    When I send a text message to my friends Trac phone, my iphone 4s sends him two messages(even though I am under my 160 count).  He said that the first message is full and the second one is only one word.  Can anyone help me with this?

  • No service, sim not provisioned, copy numbers from old phone to iPhone!!!

    As Apple don't provide any sort of useful instruction manual with the iphone here are the probs and answers I encountered with my iPhone 3GS.
    *copy numbers from old phone to iPhone*
    1st problem is that my old Nokia had far more numbers stored on it than on the Sim card alone, so having received and opened box of iPhone with new sim card I switched off my old Nokia phone, removed old sim card, replaced it with new sim card and copied contents to new card, then ejected new card from old phone and fitted in new iPhone.
    NOTE: You will need to have an iTunes account set-up.
    From the main menu in the iPhone select 'settings' > 'Mail, Contacts, Calendars', then scroll down & click on 'Import SIM contacts'. The numbers should be copied from your sim to your iPhone which stores the numbers on its memory rather than the SIM. - I looked for hours before discovering this!
    If you have more numbers on your old phone, then be careful to select numbers from phone / sim which is in the 'phone book' > 'settings' >'Memory in use' because you can more numbers from phone to sim and similarly protect numbers from deletion by moving them to the phone memory.
    It took me three chip moves from phone memory from Nokia to iPhone before all the numbers were moved.
    Note that text messages are NOT transferred from Nokia to iPhone via sim.
    **No Service* or 'Sim not provisioned'*
    Not able to connect to the rest of the world or SIM not provisioned may be down to you not switching your phone off properly, no thanks to the rubbish instruction manual with the iPhone where they assume you know where everything is!
    Anyone looking for help on this subject, look to the button located on the top of the phone at the right, and hold it down until you see the message 'slide to power off' the slide your fingers of the message from left to right until the phone switches off.
    This advice posted by my own problems with using the iPhone for the first time today.
    Having played around with the settings for a few hours I need to make comment that the iPhone is light years ahead of its competition.

    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • HT4623 Take pictures, but are not taken to save them in a photo album. This problem occurred after you update to ios 6.0.2. My phone is iPhone 5

    Take pictures, but are not taken to save them in a photo album. This problem occurred after you update to ios 6.0.2. My phone is iPhone 5

    That's corrected, they save to your camera roll.

  • How do I get composite av cable to work on iPhone? Audio works, no video. Thank you for any help

    How do I get composite av cable to work on iPhone? Audio works, no video. Thank you for any help

    did you choose the correct input source ?
    I have to choose composite for my tv to show anything
    also the iphone 4 dont support mirror so it will only display
    picture when in supported apps like apples video app and youtube and the likes

Maybe you are looking for

  • Acrobat 9 prints background all black and letters as white

    Acrobat 9 will print text as if white and all the background as black. OS is Windows 7 32bit. Most occurences are when trying to print scanned pdf's contained in emails. Any suggestions on how to fix or settings to try?

  • Soap Message in webservice

    Hello All, I have a SOAP request as below shich is sent from a client proxy(consumer proxy) in SAP. POST /blw/annehmen/2/0/ws/sendeWholesaleMeldung HTTP/1.1..Content-Type: text/xml; charset=utf-8..Content-Length:23711..accept-language: en..sap-langua

  • Address Spacing Problem in Reports

    Hi everyone I am having problems with spacing in one of my reports for addresses: This is the format I would like to have Address Line1 Bldg Name Address Line2 Address Line3 City, Province/State, Postal Code/Zip Country Sample Address with Bldg Name

  • BOM with ECR

    Hi friends,     We are trying to replace a bom component with a new from a future date using ECR. we changed the material master MRP2 view with indicator and future component and effective date. How to change the bom with ECR. do we need to delete th

  • I was downloading ios 8 on the iphone 4 when an error occurred and now the white line froze just before it finished.  what do i do?

    iphone 4 froze after error occured during ios 8 update, how do i fix it?