Jabber server New alert message

I have been using a jabber server to access my MSN account and it has worked pretty good for several months. only issues, is sometimes it shuts off with no warning or once a got an alert message in another language. when i replied in english, there was no return message, and then the server kicked me off and went off line for a while.
This morning i logged in to my iChat and started getting a message from the server (msn.netlab.cz). the messages read: "Your MSN account has been logged in elsewhere. Please logout at the other location and then reactivate the MSN transport." This message keeps coming up every 3 or 5 minutes.
no i know i am not logged in anywhere else, but i shut it off on iChat and logged into MSN messenger anyways. i could log in with no problems, so i assume i am not logged in.
Has anyone heard of this message coming up as a false error or is it possible someone is logged in under my msn account? I do not give out passwords so i don't see how.

Hi GIlbert,
I haven't heard of that message before, but you're right, that would be annoying happening so often! It is possible that someone hacked into your MSN account by guessing the password (which it never hurts to change a password every so often just in case). I'm not saying that's exactly what happened though.
The other situation could be that you logged on via another IP address somehow (through an open wireless connection?) and never properly closed out the connection. So the server would still see you online, even though you're really not.
There are a few Google results on the subject though. Maybe this thread will help you out or shed some light on the issue?
Good luck!
-Ryan

Similar Messages

  • How do I disable the new alert message popups that darken the whole webpage and are completely intrusive?

    <blockquote>Locking duplicate thread.<br>
    Please continue here: [/questions/811301]</blockquote><br>
    Whenever a website or javascript pops up an alert message, Firefox4 now completely greys out the site. How do I turn this retarded feature off? Also how do I get my status bar at the bottom of the window back? Another retarded design decision.

    You can look at the pref <b> prompts.tab_modal.enabled</b> to false on the <b>about:config</b> page.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />

  • I can't find the new text message alerts for every person - help!

    Hi.
    As I frequently check the Apple website, I visited the iOS 4.2 download site. It said that you get custom text tones and 17 new sounds.
    So I updated to get the new things. But then I checked Settings to see the new alerts and what they sounded like. But I only found the same old Tri-tone, glass, horn, etc. There were no new ones.
    So I checked Phone, but there was no custom text message alert option.
    Am I the only one experiencing this problem? I have an 8 month old iPhone 3GS and it works great.
    I am also suspecting that it could be an iPhone 4-only deal.Which would be ridiculous because I would be really upset to see that Apple only cares about the people who cash in their hard-earned bucks on every new Apple gizmo they set eyes on.
    Please help! Thanks in advance

    I understand that it has been answered and has been said that it is for the iPhone 4 only; however, on their website it does not specify that, this is exactly what it states:
    "Messaging with text tones
    Know who’s texting without looking at your screen. Choose from 17 new alerts and assign custom tones for people in your contact list.
    iPhone only."
    If I am not mistaken, "iPhone only" includes every iPhone generation to which 4.2 can be installed in, not just the iPhone 4. If it is in case for the 4 only, then they should have specified and not made a misleading advertisement about it since every iPhone user has been waiting for new tones of any sort since the first iPhone ever came out. Making it available for only iPhone 4 users is a very fowl move from Apple since it's such a basic thing to the phone itself. They should address the issue correctly and make it available for the 3G and 3GS.
    Apple just asked for angry customers with this one and they definitely know it's not fair.

  • New Version Alert Message

    I keep trying to open my iTunes. Every time i try and open the program I get an alert message. It says the following: 'The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.' It won't do anything after it says this. Does anyone know how I can access my iTunes program and all my files?

    Tried making sure you're running the latest iTunes?
    http://www.apple.com/itunes/download/
    If so, this may possibly fix it:
    How to re-create your iTunes Library
    http://docs.info.apple.com/article.html?artnum=93313

  • Linked Server :: OLE DB provider "OraOLEDB.Oracle" for linked server "ABC" returned message "New transaction cannot enlist in the specified transaction coordinator. ".

    Hello All,
    As mentioned in title, i am stuck up with that articular error from last three days,
    i have following scenario, my SQL server 2008, my oracle 10g are on both same machine with OS Windows Server 2008.
    the following error generated on my management studio when i execute my procedure written in my SQL server. Following is original source code snippet after error massage.
    OLE DB provider "OraOLEDB.Oracle" for linked server "ORCL" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
    Msg 50000, Level 16, State 2, Procedure PROC_MIGRATE_MST_FRM_ORA_SQLSERVER, Line 43
    The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORCL" was unable to begin a distributed transaction.
    BEGIN TRY
    -- MIGRATION OF PR_COMPANY_MH START
    BEGIN TRANSACTION T1
    PRINT 'mILAN NNNNNNNNN 11'
    INSERT INTO PROD.PR_COMPANY_MH
    SELECT * FROM OPENQUERY(ORCL, 'SELECT * FROM PR_COMPANY_MH WHERE SQL_FLG = ''N'' ')
    PRINT 'mILAN NNNNNNNNN 12'
    UPDATE OPENQUERY(ORCL, 'SELECT SQL_FLG FROM PR_COMPANY_MH WHERE SQL_FLG = ''N''')
    SET SQL_FLG = 'Y'
    --EXECUTE ('UPDATE PROD.PR_COMPANY_MH SET SQL_FLG = ''Y'' ') AT [ORCL]
    PRINT 'mILAN NNNNNNNNN 13'
    COMMIT TRANSACTION T1
    -- MIGRATION OF PR_COMPANY_MH END
    END TRY
    BEGIN CATCH
    PRINT 'mILAN NNNNNNNNN 14'
    ROLLBACK TRANSACTION T1
    PRINT 'mILAN NNNNNNNNN 15'
    SELECT
    @ErrorNumber = ERROR_NUMBER(),
    @ErrorSeverity = ERROR_SEVERITY(),
    @ErrorState = ERROR_STATE(),
    @ErrorLine = ERROR_LINE(),
    @ErrorProcedure = ISNULL(ERROR_PROCEDURE(), '-');
    PRINT 'mILAN NNNNNNNNN 16'
    SELECT @ErrorMessage = ERROR_MESSAGE();
    RAISERROR (@ErrorMessage, @ErrorSeverity, @ErrorState, @ErrorNumber, @ErrorProcedure)
    PRINT 'mILAN NNNNNNNNN 17'
    END CATCH
    this perticular part is raising that error, and i had tried every configuartion on my local machine related to MS DTC.
    When i remove my transaction code, its work just fine no exception raise, but when i use then i.e. BEGIN TRAN, COMMITE TRAN, AND ROLLBACK TRAN. its giving me error, other wise its fine.
    Please Help or disscus or suggest why my transaction base code is not woking????
    thanks in advance.
    Regards,
    Milan

    Sorry again, I am new on any kind of forum, so i am learning now, following is the error massage generated by SQL Server. and its not
    an architecture problem, i had just included my complete architecture to be more informative while asking for the solution or suggestion. My real problem is T-SQL, i think and its related to Distributed queries raise in SQL Server in Oracle Link Server.
    OLE DB provider "OraOLEDB.Oracle"
    for linked server "ORCL" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
    Msg 50000, Level 16, State 2, Procedure PROC_MIGRATE_MST_FRM_ORA_SQLSERVER,
    Line 43
    The operation could not be performed because OLE
    DB provider "OraOLEDB.Oracle" for linked server "ORCL" was unable to begin a distributed transaction.

  • Aftet the closing all tabs of site "vkontakte.ru" still remains sound of alert for new incoming messages. Helps get rid of this only reopening browser.

    Aftet the closing all tabs of site "vkontakte.ru" still remains sound of alert for new incoming messages. Helps get rid of this only reopening browser.

    Problem was founded: plugin "Speed dial" was autoupdating this page when open new tabs with him

  • IChat no longer connecting to Jabber server after Leopard upgrade

    Just upgraded to Leopard yesterday, and the only significant glitch I notice so far is that iChat is now getting stuck in the "Connecting..." step when I try to get onto our Jabber server (which was working fine before the upgrade). Am now getting a "untrusted certificate" message now, which I also didn't get before, but I can continue and it does try to connect but gets stuck in doing so every time.
    Have tried tweaking the jabber account server settings, but to no avail.
    Sound familiar to anyone?
    Cheers.

    Hey! SO i was having the same problem but I discovered what was wrong. Actually I don't know what the problem was, but the solution to this is...........
    1. delete your old jabber(google) account
    2. add a new account, and then on the "type of account" there is a new one called Google Talk Account, and obviously pick that option !
    3. enter username and password and BINGO! it works

  • 12511 Unexpectedly received TLS alert message; treating as a rejection by the client

    ISE Version: 1.2.0.899 (Running in VMware)
    WLC: 5508 ver 7.6.100.0
    I have a WLAN created that uses dot1x authentication. The WLAN points to ISE for RADIUS AAA. I cannot get any windows computer to connect to it (7,8 or 8.1 tested), but android, ios and osx are all able to connect. I have a 3rd party cert (GoDaddy) installed in my local store in ISE, which is valid and not expired. I do not understand why windows machines are failing.
    I am migrating to this new ISE server and my old ISE server has the same configuration (as far as I can tell) for this WLAN and it works for all devices, including windows. The difference is that it is on a different domain (the reason for the migration is we changed domains).
    Here is the ISE error:
    Event: 5400 Authentication failed
    Failure Reason: 12511 Unexpectedly received TLS alert message; treating as a rejection by the client
    Resolution: Ensure that the ISE server certificate is trusted by the client, by configuring the supplicant with the CA certificate that signed the ISE server certificate. It is strongly recommended to not disable the server certificate validation on the client!
    Root cause: While trying to negotiate a TLS handshake with the client, ISE received an unexpected TLS alert message. This might be due to the supplicant not trusting the ISE server certificate for some reason. ISE treated the unexpected message as a sign that the client rejected the tunnel establishment.
    Here is the WLC error:
    AAA Authentication Failure for UserName:Domain\User User Type: WLAN USER
    Here is the windows event viewer error:
    Source:        Microsoft-Windows-Security-Auditing
    Event ID:      5632
    Description:
    A request was made to authenticate to a wireless network.
    Subject:
        Security ID:        NULL
        Account Name:        User
        Account Domain:        Domain
    Network Information:
        Name (SSID):        IT-Test
    Additional Information:
        Reason Code:        Explicit Eap failure received (0x50005)
        Error Code:        0x80420014
        EAP Reason Code:    0x80420100
        EAP Root Cause String:    Network authentication failed\nThe user certificate required for the network can't be found on this computer.
        EAP Error Code:        0x80420014
    On the ISE server that is working you are presented with a window that asks you to connect or terminate based on the certificate not being validated. I don't know why that isn't happening with this new ISE server, it just fails without prompting the user to connect or terminate. Both certs are from GoDaddy.
    A difference between the certs is the old has a cert that was generated through ISE and the new server has an imported wildcard cert.
    Anyway, I hope that is enough information to understand the issue. I appreciate the time anyone takes in assisting me with this issue. I did setup a copy of the WLAN so that I can test as needed and not have to wait for a maintenance window.

    Thanks for your prompt reply. If I understand you correctly, the workaround is to essentially NOT use a wildcard certificate?
    Here is another thing. In the certificate operations section I moved EAP to the self-signed certificate and the behavior is the same, but the error is different. The self-signed cert isn't a wildcard and it still fails on windows only.
    ISE Error:
    Event: 5400 Authentication failed
    Failure Reason: 12321 PEAP failed SSL/TLS handshake because the client rejected the ISE local-certificate
    Resolution: Check whether the proper server certificate is installed and configured for EAP in the Local Certificates page ( Administration > System > Certificates > Local Certificates ). Also ensure that the certificate authority that signed this server certificate is correctly installed in client's supplicant. Check the previous steps in the log for this EAP-TLS conversation for a message indicating why the handshake failed. Check the OpenSSLErrorMessage and OpenSSLErrorStack for more information.
    Root cause: PEAP failed SSL/TLS handshake because the client rejected the ISE local-certificate
    Obviously the self-signing CA isn't in the local machines store.

  • Alert Message and linefeeds

    I can create a multi-line alert in the Forms 6i Builder, Alert Property Palette, in the Message by using the editor window and typing and using the Enter key to break the line. When I close the edit window, the text shows up on the property with a box where the linefeed is. If I cut the box and paste it into a different editor, I see it is actually the chr(10) linefeed character.
    When I compile and run the form on Web Forms 6i, the message displays as a multi-line message, with linefeeds where I wanted them.
    However, I cannot use Set_Alert_Property to set the message. The Chr(10) characters are displayed on the web forms as a square box.
    An earlier topic here reported that using \n or /n in place of chr(10) would work in Web Forms, but I cannot get either to work.
    So if anyone knows how to use Set_Alert_Property to set the message containing a linefeed that works on Web Forms 6i, I would really like to know.
    Thanks in advance.

    Ok, upon further investigation, I found that I was mixing alert messages with stacked messages via the Message command. We use a generic PLL_ALERT call to display popup windows. It checks to see if an alert named 'ALERT_001' is defined in the current fmb, and if so, AND if the message is less than 200 characters, uses the alert. If there is no alert defined or if the message is more than 200 characters, uses the stacked message command.
    It is in the stacked message on the web where both CHR(10) and CHR(13) do NOT work.
    Here is what I found:
    CHR(10) starts a new line for:
      Forms6 client/server alert
      Forms6 client/server message
      Forms6 web alert
      ***fails (space) Forms6 web message
    CHR(13) starts a new line for:
      Forms6 client/server alert
      Forms6 client/server message
      ***fails (a box) Forms6 web alert
      ***fails (a box) Forms6 web message
    CHR(138) starts a new line for:
      ***fails (S) Forms6 client/server alert
      ***fails (S) Forms6 client/server message
      Forms6 web alert
      Forms6 web message
    The CHR(138) 'S' has a curve (umlaut?) above it in Forms6 client/server.
    Here is the code I used in a key-dup-item trigger to get my results above:
    DECLARE
      msg VARCHAR2(300) :=
        '____long_line_to_set_alert_window_width____ '
        ||'CHR(10)---a'||CHR(10)||'b---'
        ||'CHR(13)---c'||CHR(13)||'d---'
        ||'CHR(138)---e'||CHR(138)||'f---';
    BEGIN
      SET_ALERT_PROPERTY('ALERT_001',ALERT_MESSAGE_TEXT,msg);
      IF SHOW_ALERT('ALERT_001') = 0 THEN NULL; END IF;
      -- stacked messge --
      MESSAGE(msg);
      MESSAGE(' ',NO_ACKNOWLEDGE);
    END;

  • Check  File Existence and display  alert message

    Hi,
    I have a servlet which uploads file to server. Below is my code and is working file. Now, I want to check if the file uploading by the user is already exists. If so , I have to display a message to user "The file you are trying to upload already exists. Do you want to overwrite" with YES or NO actions.
    How can I display this alert message from user.
    //item.write(tosave);
              FileItemFactory factory = new DiskFileItemFactory();
              boolean isMultipart = FileUpload.isMultipartContent(request);
              System.out.println(isMultipart);
              Map fileDetails = new HashMap();
              ServletFileUpload upload = new ServletFileUpload(factory);
              List items = upload.parseRequest(request);
              Iterator iter = items.iterator();
              while (iter.hasNext()) {
                   item = (FileItem) iter.next();
                        if (item.isFormField()) {
                                       String fieldName = item.getFieldName();     
                                       String fieldValue = item.getString();
                                       fileDetails.put("fileName",item.getString());
                        else {
                                  fileDetails.put("path",item.getName());
                                  cfile=new File(item.getName());
                                  onlyFileName = cfile.getName();
                   if (! folder.exists()) folder.mkdirs();
                   if(cfile.exists()){  //THIS CHECK THE FILE EXISTENCE.  HOW CAN I DISPLAY ALERT MESSAGE TO USER HERE.
                        System.out.println("File Already Exists Path is ");     
    Can anyone suggest me on this.

    It won't work like that because JavaScript will run either before the form is submitted or after the page has been generated. In either case, you can't really communicate between the server side code and client side code.
    What you can do is use Ajax to communicate with a servlet that checks for the duplicate file and responds accordingly. You can then perform the appropriate action on the page. This should be very simple to setup, take a look at this basic tutorial [1].
    [1] http://www.w3schools.com/ajax/default.asp
    People on the forum help others voluntarily, it's not their job.
    Help them help you.
    Learn how to ask questions first: http://www.catb.org/~esr/faqs/smart-questions.html
    ----------------------------------------------------------------

  • Clear/Delete alert message in CCMS

    Hi, I have a red alert message in RZ20 (CCMS monitor) in the node called QRFC Queues - Exactly-Once Processing Queues - Int. Server Outbound Messages (XBTO*) - Blocked queues: Client 100
    It's a message that failed a week ago, and the message is now correctly processed, but the alert remains.
    How can I delete or remove the alert from the monitor?
    Thanks!

    Solved it. I just clicked the button Display alerts, then in the new view clicked Complete Alerts.

  • Multiple Receivers for Alert Messages

    Hi All,
    I have to send alert message to multiple users (SAP and Non-SAP Users) through ALRTCATDEF.
    I know there is option of creating Distribution List and assign this Distribution list.
    Would like to is there any other possible way to acheive this?
    Can we have the distribution list (SAP and Non-SAP Users) created in email exchange server (ex:- [email protected]) ,create one user in SAP and assign this user to the distribution list that is created in the email exchange. finally provide this in Fixed recipient of ALRTCATDEF.
    Anyone tried this ?
    Will this work?
    What are the advantages going this way rather than creating DL in SAP?
    Thanks,
    Sai

    Hi Sai,
    We are also did in same way.  Created DL in mail exchange server and created one user id in SAP and assigned the DL mail to that user.
    If you do it this way you can add the new members to DL in feature without any risk.
    Thanks,
    Satish.

  • Problems with changing screen & alert message. Bug?

    Hallo everybody,
    I have very strange problem.
    I'm using gauge in independent screen while mobile phone is connecting to server. If it cannot connect becouse of any reason (bad password, etc), it should jump to main menu and display Alert with error message:
    public void catchError(String error_message){
            display.setCurrent(mainMenu);
            currentMenu = MAIN_MENU;
            Alert alert = new Alert("ERROR!", error_message, null,  AlertType.WARNING);
            alert.setTimeout(Alert.FOREVER);
            display.setCurrent(alert);
    }So with this code, it show mainMenu for a very short while (about 1/10 s), than displays alert. But when I dismiss the alert message, it jumps back to "Gauge_screen"!
    I think it put screen to some buffer, but when I change display so fast, it cannot complete it sucesfully. Only solution of this problem that I found is very stupid and I cannot use it with clear mind:
    public void catchError(String error_message){
            display.setCurrent(mainMenu);
            currentMenu = MAIN_MENU;
            int i = 0;
            while (i<10000){
                i++;
            Alert alert = new Alert("ERROR!", error_message, null,  AlertType.WARNING);
            alert.setTimeout(Alert.FOREVER);
            display.setCurrent(alert);
    }Does someone saw and solve this problem before? What do you think about it?
    Thanks
    petosh

    It's probably because setCurrent() is not something that happens instantaneously. So after setCurrent() when you put the alert on the display still hasn't changed so it remembers that it has to return to the gauge screen. You can use setCurrent(Alert a, Displayable next) to set the alert with the menu as the next screen.
    shmoove

  • Display an Alert message in PL/SQL block in APEX

    Hi,
    we are getting an oracle exception while inserting a new row. As it is having the unique constaint on a coulumn.
    Now the problem iis we need to Display an "Alert message" based on the input field validation. That java script code for alert has to be embeded nside a PL/SQL block in Oracle APEX Application.
    we tried doing this with below code:
    Begin
    INSERT INTO <<table name>>(ID,NAME) VALUES (s1,:TXT_s2);
    exception when others then
    htp.p('<script language="javascript">');
    htp.p('alert("Exception");');
    htp.p('</script>');
    end;
    If anybody knows .... please reply.
    Thanks,
    Subarna
    Edited by: user9955252 on Apr 21, 2010 1:47 AM

    Hello,
    APEX Forum is here : Oracle Application Express (APEX)
    Regards

  • An alert message observered while appling latest patch MLR 10

    Hi Gurus,
    While applying latest patch MLR10 we observed an alert message as below
    "Creating log file "C:\oracle\midtier\.patch_storage\8404955\Apply_8404955_05-21-
    2009_15-44-27.log"
    Conflicting patches: 8204237,
    Patch(es) 8204237, conflict with the patch currently being installed (8404955).
    If you continue, patch(es) 8204237, will be rolled back and the
    new patch (8404955) will be installed.
    Note: If the patch currently being installed (8404955) is rolled back,
    it is recommended that the fixes being rolled back here (8204237, ) are reinstal
    led.
    If a merge of the new patch (8404955) and the conflicting patch(es)
    8204237, is required, contact Oracle Support Services and request
    a Merged patch.
    Do you want to STOP?
    Please respond Y|N
    Should we rollback the previous patch before applying MLR10 ? or can i continue with patch application ?
    Thanks in advance,
    Regards,
    Cema

    Please continue the MLR10 patch installation, this message would appear for the all patch installation (of course, patch number would be different though).

Maybe you are looking for

  • Outlook password

    When I attempt to set up an e-mail account with Outlook, it asks me for "the password my Internet provider has given me." Where the hell do I find this?

  • Why can't I delete music from my iPad mini?

    I have an iPad mini, and it's updated to the ios7. I know how to delete my music (swipe from right to left) but it won't let me do that for certain songs. The songs are older than the ones that I can delete. Also, the songs have then icloud sign next

  • IPhone 5s some body tracking my iPhone and Apple ID please hela

    Some body tracking my iPhone 5s .with Mac .i need sing out for Mac .and backup my device and all Apple ID stuff .video photo etc

  • Troubles using an external display...

    hi recently I bought from a friend a cinemadisplay and everything works fine except everytime I come back from a travel I must repair disk when I plug the cinemadisplay again...? tnx in advance... m

  • Where we check the authorization group & authorization object?

    Hi all, i have a  std program & tcode  like fb03 . now i want to know the authorization group & authorization object. so where we will check..? help me. thanks. Vipin