Jabber Video Issue on Mac

I am running Jabber Video 4.6 (17194) and OS X 10.9.4.  When I installed the Jabber software, it would not recognize the built-in camera or my Tandburg HD Camera.  I have a meeting with a Client on Wednesday and this is the way that they are requesting that we communicate.  I need to figure out what is the issue.  
I can get both cameras to work with Face Time.  I also have the following collboration tools loaded that do not have an issue with the cameras:
Lync for Mac 2011 v14.0.9 (140606)
Cisco Jabber v9.6.0 (173114)
Assistance would be most welcome.
Mike

Hi Mike,
It is a known issue. It is a Bug in version 4.6.
You need to upgrade to version 4.7 or higher, just be aware that the user will be prompted to downgrade when signing in because Cisco is currently only provisioning version 4.6.3. The user should decline that :-)
http://software.cisco.com/download/release.html?mdfid=283613653&softwareid=280886992&release=4.8.6.18185&relind=AVAILABLE&rellifecycle=&reltype=latest
Thomas

Similar Messages

  • Video issues in mac os 10.6.4 and windows 7 64x

    To start with, my computer is the late 2008 model Imac, has 3g of memory, and wasn't experiencing any video problems until earlier this month. I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
    I'm thinking, Ok, perhaps this is a bad install of windows, since it happened in a windows program (everquest 2, an online game), and rebooted into Mac. Almost immediately, I saw video problems (snow, pixels, lines, distortion)on the mac side, which had occurred with the windows side.
    My husband is angry, I'm angry, so I decide that I'm going to trash everything and start off completely fresh. I intended to reinstall mac 10.6.4 after erasing everything, so I removed the windows partition, and attempted to reinstall snow leapard, without using the original leapard disc that came with the system. I didn't realize until too late that I had forgotten to erase the original os, but I figured I'd see if there were any problems and go from there. I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side. I was able to fully update the mac side before attempting any installation of the windows os.
    I started having video problems really quickly in the windows side after the full installation and update, but the system disabled the initial nvidia drivers and went to plug and play drivers. The only thing that displayed any further problems was the ISight camera, but that was to be expected without the apple updates.
    I did read the bootcamp manual afterwards, and saw that my IMac, being an earlier version, might not properly install bootcamp drivers for windows 7 64x, although we had successfully located and manually installed the drivers earlier when first installing windows 7 64x. Keep in mind, I'd had the os installed for several months without any video problems, and in fact, it worked like a dream in both os after the computer had a previous repair of the hard drive, sound card, and logic board.
    Anyway, to continue, after the video symptoms occurred on windows, I switched back over to mac to look for and install a video firmware download that I had located through these same forums. I had to change os because it was a dmg, so I did so. Now, I still had the snow leapard install disc in the computer, so that's the first thing I saw on the screen when booting into mac. I immediately started also seeing the pixels and some distortion, but it stopped briefly. I tried bringing up Firefox to get to the download, but the computer froze (showed the little round ball)and wouldn't respond further. I tried several reboots, and could usually at least get into snow leapard, but the computer froze each time.
    Finally, after several attempts, the computer won't boot into either os, and won't go into the install disc either. I'm completely at a loss, because I'm told this IS NOT a hardware issue, and the problem was resolved with simply resetting everything. The problem was NOT resolved with that reset, because I'm able to reproduce this issue consistently with multiple reboots, and have even recorded it with a camera I have. I'm at my wit's end, because I'm on a fixed income, and this costs me time and money I just don't have. It's caused me to get behind on one of my bills, because I have to have a computer, and further repairs, while covered under warranty, are going to cost me further money to get to and from the service center. Not to mention the fact that it's going to take another month for me to wait for my money to become available so that I can pay for the ride back and forth for the repair.
    Anyone, anyone at all, have any suggestions that may help? I have access to another computer, and can try using that computer to help me boot the other computer up, if I know how. Please, this is so frustrating to me, so I'm hoping someone can suggest something that may help.
    I know I mentioned in the post what type of video issues I'm experiencing, but I figured I'd reiterate to make it easy. The computer will display a distorted image on bootup, like a pixelated off-center image. You know, kinda like 2 punch cards held up to each other, with the same holes, but off center. You also get snow, when able to boot up, with the screen sometimes showing half the screen, flickering. Like the screen is broken, but it's not even scratched. And it's not all the time either, if it was, I would think maybe an internal screen was broken or cracked (I've worked tech support for devices with internal screens, so I understand you can have a perfectly good outer screen, but a cracked inner screen). Right now, on bootup, I get that punch card effect, then the screen goes blank. I should mention that sometimes the system will show that, but then boot into windows with no immediate distortion, but will show distortion in the mac side if I'm able to boot into snow leapard. Hope this information helps someone give me an answer that helps.

    To start with, my computer is the late 2008 model Imac, has 3g of memory …
    I'm assuming you mean the Early 2008 iMac since there is no "late 2008" one. AFAIK, it came with 2 GB of RAM standard & the common BTO option would have been 4 GB, so can we assume that you have installed an aftermarket memory module to get to 3 GB?
    I've already had it serviced, and was told that the issue was resolved, and was unrelated to hardware. Fifteen minutes after repair and setup, the exact same symptoms occur.
    What repair and setup? Is this something you did after getting the iMac back from service? If so, what exactly did you do?
    I had no initial problems with the install of either os (mac or windows), except to note that I couldn't install the apple software updates on the windows side.
    Do you mean the Windows drivers or something else? Did you follow the Bootcamp install procedure exactly when reinstalling Windows or not?
    I switched back over to mac to look for and install a video firmware download that I had located through these same forums.
    What video firmware download do you mean? AKAIK, there are none for early 2008 iMacs.
    No offense intended, but it is hard to understand exactly what you have done because while you mention much, you don't say a lot about the specifics for a lot of that. In general, it is best to concentrate on those things & keep the commentary to a minimum.

  • Jabber for iPad video issue

    How can I troubleshoot video issues?
    I setup the iPad device (G711) and then placed a call to a Jabber for Windows (G729) phone. Audio worked fine but no video. I changed the Jabber for Windows to G711 and video started working?
    Is Jabber for iPad going to support G729 and if so when?
    Thanks,
    Doug

    Hello i have the same issue!
    Someone find the cause for this issue?
    Regards
    Leonardo Santana

  • I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    Hi Seattle
    From Adobe site only!
    flashplayer11_b1_install_mac_071311.dmg
    Works fine.
    Cheers Tomi

  • Jabber Video for Mac 4.6 does not find iSight camera

    Hello.
    I recent purchased a new Mcbook Air (MacBoorAir6,2) and was hoping to use the new built in HD camera with Jabber Video. Except JV doesnt seem to find the camera in prferences. I assume that since this MBA has only been out for a week that it's just a matter of Cisco updating the JV client to support the camera? Or is there something I need to do to the OS so JV will be able to use the camera?

    Yes, version 4.7 solves this issue. Download here:
    http://software.cisco.com/download/release.html?mdfid=283613653&flowid=46186&softwareid=280886992&release=4.7.4.17771&relind=AVAILABLE&rellifecycle=&reltype=latest
    For more info search for user Jason Hirdler on this thread:
    https://supportforums.cisco.com/thread/2226206

  • Setting up Jabber Video for TelePresence with QS C20 system

    I am trying to connect  Jabber Video for TelePresence for Mac (Free version)  from home to my office's QuickSet C20 system. Can you tell me what data (addresses etc) I need to have and where to input them to make this work.
    I have downloaded the software on both the mac and ipad and have created an account.
    Can someone help?
    Doug

    Thanks again.
    The info from C20 system is:
    URI 1 :
    [email protected]
    DisplayName :
    Click to edit...
    DefaultTransport :
    Auto
    TlsVerify :
    Off
    Type :
    Standard
    Outbound :
    Off
    Proxy 1
    Discovery :
    Manual
    Address :
    Click to edit...
    Proxy 2
    hope this helps.
    Also what is the difference (in the context of the above connection issues) between iPad o Mac version of Jabber Video.
    doug

  • Jabber (Movi) 4.4 Mac - Black Image when connecting to Endpoint

    I've noticed that on the Jabber 4.4 for Mac client, when I dial into an endpoint (I use C40, C20, and SX20), occasionally all I see on the client is a solid black image.  The farend does see the person in front of the client.  If you quit the client, and redial the endpoint, it will most likely connect correctly.  I would say about 25% of the time, it requires multiple attempts until the client can display the video.
    I verified that the endpoint was transmitting video.  My search history in VCS shows the call conntected without issue.
    Has anyone seen this?

    Hi Patrick,
    have you checked your antivirus? is it blocking something. try to disable the antivirus and check again..
    collect the wireshark on the pc as well. it will give much clear idea.
    thanks
    alok

  • MBA (mid 2013) and Cisco Jabber Video client not recognising any camera

    The Cisco Jabber Video client is not recognising the internal Facetime HD camera nor the external USB Logitech Webcam C920.
    This was not working from the beginning. Cisco is aware of this issue and promised to deliver a fix in the next release of their software.
    After installing the 10.8.5 Update from App Store and the 10.8.5 Supplemental update the Cisco client was able to recognize the external camera.
    After that I followed a hint to install the Combo update this should enable Skype to recognise the Facetime HD camera. After installing the Combo update Skype was able to recognize the internal and external camera (by the way the quality of preview video using Facetime HD was brilliant and much better than the internal camera of a MBA from 2012). BUT after that update the Cisco client was no longer recognising a camera.
    I run a recovery installation of 10.8.4 - but the result was again a 10.8.5. If I try now to run a recovery install I only get a recovery of version 10.8.5 offered.
    I did a SMC reset, a parameter RAM reset, tried to start in saved mode but nothing helped.
    Any other ideas how to get a least an external camera working again with Cisco Jabber Video?

    Similar problem here. I have a Logitech C615 camera/microphone plugged into my MAC mini running OSX 10.9.3. Today, JABBER could not find the camera (although it found the microphone?). I was running 4.5.7 and so downloaded v4.8.6 and reinstalled: no camera. I also downloaded the cloud version: no camera.
    I was not running either Vidyo or Polycom RealPresence at the same time as JABBER
    But, when I did run these apps, my camera & microphone both work.
    Suggestions?
    John

  • Kernel Panic on iMac with Pixelated Video Issues

    One of our work iMacs has been having weird pixelate video issues recently. Sometimes previews of program windows will freeze on screen... and as you move the window around the screen "erases" this preview from the LCD... It is a 2006 24" White iMac 6,1. Now we get some Kernel Panics with the following error message. Please help me decipher it. Thanks!
    Interval Since Last Panic Report:  8641685 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    E865F049-A575-4D59-A574-9D24C6EFD141
    Fri Mar 30 07:35:41 2012
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x43923bb8 : 0x21b837 (0x5dd7fc 0x43923bec 0x223ce1 0x0)
    0x43923c08 : 0x2abf6a (0x59e3d0 0x53c01f 0xe 0x59e59a)
    0x43923ce8 : 0x2a1a78 (0x43923d00 0x0 0x43923da8 0x53c01f)
    0x43923cf8 : 0x53c01f (0xe 0x48 0x10 0x10)
    0x43923da8 : 0x53d2f5 (0x78f3000 0x785c240 0x43923df8 0x78f3000)
    0x43923dc8 : 0x570fcd (0x78f3000 0x785c240 0x43923de8 0x2a45c9)
    0x43923e18 : 0x28bb49 (0x78f3000 0x749a4a0 0x749a4b8 0x2106d8)
    0x43923e58 : 0x21dbe5 (0x749a0a4 0x749a484 0x43923ea8 0x3a23)
    0x43923e98 : 0x210a86 (0x749a000 0x0 0xbc747a0 0x7f6b690)
    0x43923ef8 : 0x216f84 (0x749a000 0x0 0x0 0x0)
    0x43923f78 : 0x295c57 (0x7daf5e8 0x0 0x0 0x0)
    0x43923fc8 : 0x2a256d (0x7daf5e4 0x0 0x10 0x0)
    BSD process name corresponding to current thread: Dock
    Mac OS version:
    10K549
    Kernel version:
    Darwin Kernel Version 10.8.0: Tue Jun  7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
    System model name: iMac6,1 (Mac-F4218FC8)
    System uptime in nanoseconds: 154254231492
    unloaded kexts:
    (none)
    loaded kexts:
    com.apple.driver.AppleHWSensor          1.9.3d0 - last loaded 121081986701
    com.apple.filesystems.autofs          2.1.0
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.driver.InternalModemSupport          2.6.2
    com.apple.driver.AudioAUUC          1.57
    com.apple.driver.AppleIntelYonahProfile          14
    com.apple.driver.AppleUpstreamUserClient          3.5.7
    com.apple.driver.AppleIntelPenrynProfile          17
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleMCCSControl          1.0.20
    com.apple.driver.AppleIntelNehalemProfile          11
    com.apple.driver.AppleHDA          2.0.5f14
    com.apple.driver.AudioIPCDriver          1.1.6
    com.apple.driver.AppleGraphicsControl          2.10.6
    com.apple.GeForce          6.3.6
    com.apple.driver.AppleIntelMeromProfile          19
    com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
    com.apple.driver.AppleBacklight          170.0.46
    com.apple.driver.AppleLPC          1.5.1
    com.apple.driver.AppleIRController          303.8
    com.apple.driver.CSRHIDTransitionDriver          2.4.5f3
    com.apple.driver.USBCameraFirmwareLoader          1.1.0
    com.apple.iokit.SCSITaskUserClient          2.6.8
    com.apple.BootCache          31.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.driver.AppleUSBHub          4.2.4
    com.apple.driver.AppleFWOHCI          4.7.3
    com.apple.driver.AirPortBrcm43xx          423.91.27
    com.apple.driver.AirPortBrcm43224          428.42.4
    com.apple.iokit.AppleYukon2          3.2.1b1
    com.apple.iokit.IOAHCIBlockStorage          1.6.4
    com.apple.driver.AppleEFINVRAM          1.4.0
    com.apple.driver.AppleUSBEHCI          4.2.4
    com.apple.driver.AppleAHCIPort          2.1.7
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleUSBUHCI          4.2.0
    com.apple.driver.AppleRTC          1.3.1
    com.apple.driver.AppleHPET          1.5
    com.apple.driver.AppleACPIButtons          1.3.6
    com.apple.driver.AppleSMBIOS          1.7
    com.apple.driver.AppleACPIEC          1.3.6
    com.apple.driver.AppleAPIC          1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
    com.apple.security.sandbox          1
    com.apple.security.quarantine          0
    com.apple.nke.applicationfirewall          2.1.14
    com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
    com.apple.driver.AppleProfileReadCounterAction          17
    com.apple.driver.AppleProfileTimestampAction          10
    com.apple.driver.AppleProfileThreadInfoAction          14
    com.apple.driver.AppleProfileRegisterStateAction          10
    com.apple.driver.AppleProfileKEventAction          10
    com.apple.driver.AppleProfileCallstackAction          20
    com.apple.iokit.IOSurface          74.2
    com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
    com.apple.iokit.IOSerialFamily          10.0.3
    com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
    com.apple.driver.DspFuncLib          2.0.5f14
    com.apple.iokit.IOAudioFamily          1.8.3fc2
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.iokit.IOFireWireIP          2.0.3
    com.apple.iokit.AppleProfileFamily          41
    com.apple.driver.AppleHDAController          2.0.5f14
    com.apple.iokit.IOHDAFamily          2.0.5f14
    com.apple.driver.AppleSMC          3.1.0d5
    com.apple.driver.IOPlatformPluginFamily          4.7.0a1
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.1
    com.apple.nvidia.nv40hal          6.3.6
    com.apple.NVDAResman          6.3.6
    com.apple.iokit.IONDRVSupport          2.2.1
    com.apple.iokit.IOGraphicsFamily          2.2.1
    com.apple.driver.CSRUSBBluetoothHCIController          2.4.5f3
    com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
    com.apple.iokit.IOBluetoothFamily          2.4.5f3
    com.apple.iokit.IOUSBHIDDriver          4.2.0
    com.apple.driver.AppleUSBMergeNub          4.2.4
    com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.8
    com.apple.iokit.IOUSBMassStorageClass          2.6.7
    com.apple.driver.AppleUSBComposite          3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
    com.apple.iokit.IOBDStorageFamily          1.6
    com.apple.iokit.IODVDStorageFamily          1.6
    com.apple.iokit.IOCDStorageFamily          1.6.1
    com.apple.iokit.IOATAPIProtocolTransport          2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
    com.apple.driver.XsanFilter          402.1
    com.apple.driver.AppleFileSystemDriver          2.0
    com.apple.iokit.IOUSBUserClient          4.2.4
    com.apple.iokit.IOFireWireFamily          4.2.6
    com.apple.iokit.IO80211Family          320.1
    com.apple.iokit.IONetworkingFamily          1.10
    com.apple.iokit.IOAHCIFamily          2.0.6
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOUSBFamily          4.2.4
    com.apple.driver.AppleEFIRuntime          1.4.0
    com.apple.iokit.IOHIDFamily          1.6.6
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.TMSafetyNet          6
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          289
    com.apple.iokit.IOStorageFamily          1.6.3
    com.apple.driver.AppleACPIPlatform          1.3.6
    com.apple.iokit.IOPCIFamily          2.6.5
    com.apple.iokit.IOACPIFamily          1.3.0
    Model: iMac6,1, BootROM IM61.0093.B07, 2 processors, Intel Core 2 Duo, 2.16 GHz, 4 GB, SMC 1.10f2
    Graphics: NVIDIA GeForce 7300 GT, NVIDIA GeForce 7300 GT, PCIe, 128 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Built-in Ethernet, Ethernet, en0
    Serial ATA Device: ST3320620AS, 298.09 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-85J
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8501, 0xfd400000 / 2
    USB Device: Express USB2, 0x0dc4  (Macpower Peripherals Ltd.), 0x00db, 0xfd500000 / 3
    USB Device: Hub in Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x1003, 0x1d100000 / 2
    USB Device: USB Receiver, 0x046d  (Logitech Inc.), 0xc50a, 0x1d110000 / 4
    USB Device: Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x020b, 0x1d130000 / 3
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8206, 0x7d100000 / 2
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8240, 0x7d200000 / 3

    Re: Kernel Panic on iMac Intel Core 2 Duo with Lion 10.7.1, 4gb RAM
    27-sep-2011 11:53 (in response to jose guzman) Launch the Apple Hardware Test program, run the extended tests at least twice, and then download and run Rember. All indications are that you have bad or flaky RAM.
    27" i7 iMac 10.6.8 , Mac OS X (10.7.1), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2) 
    I did that and it doesn't work

  • HT5313 What video issues were there on 10.7.4 that got fixed in 10.7.5? Any details?

    The OS X update bulletin for 10.7.5 lists that one of the fixes in this update is
    * Resolve a video issue with some VGA projectors when connected to certain Mac notebooks.
    What is really being addressed? Any details?

    Hi Tony, Ben and others,
    I'm not sure it was the same problem, but a little while ago I have problems too with RADIUS not working on Lion,
    and by searching for solutions I found out that it's necessarily to edit /etc/raddb/clients.conf
    My problem here it didn't work was with the shared secret.
    So I edited /etc/raddb/clients.conf and put at the end of the file :
    client  10.0.0.0/24 {
            secret          =  shared-secret-type-what-you-want-here
            shortname       = private-network
    BEFORE I started RADIUS and added AE's to it
    I hope it solves your problem too …
    GreetingZz John
    PS For some strange reason I had to change the
          'Wireless Security" from WPA2 Personal ---> WPA2 Enterprice on each AE manualy
         But maybe that's just a little bug in when opening the AE in Airport Utility 6.1 cause is WAS
         working before I looked into the AE's
    PPS iPV6 not changed here
    Message was edited by: Abhor

  • Which video camera is mac compatible and suitable to record professional quality tutorials to be views on the internet?

    Background:  I want to make proffesional quality video tutorials to be accessed by other internet users.  They will be filmed from a static overhead position.  My budget is £400 but if I can get a camera for less that would be great.  I have done my best to research which camera to buy and I am stuck (mainly because I have no knowledge of this field) with a few issues.
    I thought I had found a suitable camera - Panasonic HCV-700 but I have identified a couple of issues surrounding Mac compatibility.
    I would really appreciate any experience or advice you can give me.
    I will be using imovie to edit my video and will probably add the sound after editing.
    I understand this camera can film in iframe and that that makes it easily downloaded to imovie to edit.  If I do this will the quaility be high enough to be viewed on a PC or Mac - or other smaller devices?  I understand from what I have read iframe is not HD but is higher than SD.
    Or is it better to film in another format (which as I understand it will need to have something done to it to be editable in imovie (not sure what or how much time it will add to the process of producing a video)
    I think my question's are:
    Is the camera above suitable for my needs as a Mac user - to produce proffesional quality tutorials?
    If it is not - what do you suggest?
    If it is which format should I film in to record videos for internet viewing?
    If it is not iframe then do I need other software to be able to edit in imovie?
    How much extra time do you think this will add to production times?
    Any help or advice would be much appreciated - I am starting to tear my hair out trying to research this!

    Here is the page with compatible cameras and other info. For less than $100 you can get personalized lessons on the Apple Software and how to accomplish much of what you want to do. It appears that you are starting a new endeavor and facing a steep learning curve.
    http://support.apple.com/kb/index?page=search&src=support_site.home.search_sugge sted.search&locale=en_US&q=compatible%20camcorders

  • Unable to install Cisco Jabber Video in Windows 8

    When I attempt to install Cisco Jabber Video for TelePresence (version 4.6 and 4.7) in Windows 8, I get the following error message:
    The error says: "The wizard was interrupted before Cisco Jabber Video for TelePresence could be completely installed. Your system has not be modified. To complete Installation at another time, please run setup again. Click Finish to exit the wizard."
    The error occurs for 4.6 and 4.7. What can be done to resolve this issue?

    Hi Robert,
    Is Windows 8 on a Surface Tablet or desktop/laptop?
    If Tablet, this platform is not supported.  No ETA on when a version will be released to support this.
    If desktop/laptop, then you need to update your video driver by visiting the website of the manufacturer, i.e. Intel, nVidia, ATI, etc. The latest video driver cannot be obtained by using the Microsoft update tool.  These drivers are usually generic and/or not the latest.
    Once installed, this error should go away. 
    If installed and you still get the error, then this means your video card is unsupported and you will not be able to use this software.
    Jason

  • My mac is not letting me drag a video from my mac onto iTunes?

    my mac is not letting me drag a video from my mac onto iTunes? i want to add a video from my mac to my iphone.

    hey joe,
    i have this problem too. i use snowfox coverter, and then i used to drag and drop or import using the drop down menu. now it's not letting me do either. so i emailed support at snowfox, they said that itunes is rejecting the conversions for some reason. they told me they're gonna issue a new release of the snowfox converter, so.. we'll see i guess. sorry i don't have a solution for ya. just wanted to let you know i'm having this problem too but it seems to be the converter i'm using. what kind of videos r u trying put into itunes?

  • No incoming video and audio for new Jabber video account

    We have registered a couple of jabber video account, but they all have the same issue, couldn't successfuly establish a call.
    However, it seems working fine for old jabber video account.
    Anyone can help?                  

    I have no incoming video for my Jabber account. I was doing some testing for one of my customers who had this issue. Here is what I found. I have a EX90 registered to VCS on a corporate network. I have my Jabber Express client I downloaded and installed. When I call to or from either I don't receive video on Jabber Express but I get audio from the EX90. I get Audio and video on the EX90 from Jabber. What I found when I was troubleshooting is that if you leave the call up for 30 seconds I finally start recieving video on Jabber from the EX90. After testing a few calls this happened every time. I then checked the call settings on both sides during the call. Both endpoints are experiencing 50% or so packet loss until the video started being sent to Jabber and then the packet loss dropped to 0. So I would assume there is something wrong on the Jabber Express end that is causing a 30 second or so delay when the video is being sent through the proxy. Has anyone else had this exact issue?

  • Is it possible to embed Jabber Video for Telepresence in a webpage?

    Hi, I wanted to ask whether it is possible to incorporate Jabber Video for Telepresence in a webpage so that (registered) users can join or make a call on a website? Or is it only possible to download the application to a PC and run it from there? Thanks!

    That's correct - it is in no way possible to incorporate Jabber Video for Telepresence directly into a web browser, the client must be downloaded and installed on the PC/Mac and/or iPad.
    See your other thread regarding multiple participants;
    https://supportforums.cisco.com/thread/2211227?tstart=0
    /jens
    Sent from Cisco Technical Support Android App

Maybe you are looking for