Jabber Video Size with Telepresence Document Sharing

Hi!
I can successfully share my pc's desktop in telepresence (c40) to the jabber for iPad.
However, the problem is that when I enable full screen sharing on presence - nothing changes on iPad - I still having a small desktop picture (not a fullscreen)
Anyone solved this?

Hi Randy Watson,
Using IP addresses is not an option since we use GeoDNS for media traffic.  I do not believe the proxy settings for the client will work as when configured on the client means that to login via the client those credentials go through a proxy, which is not the case for our service.
This post also provides much of what you need for your firewall:
https://supportforums.cisco.com/document/94466/i-am-network-administrator-my-company-what-port-ranges-are-you-provisioning-cisco
Regards,
Jason

Similar Messages

  • How do you increase the video size with a button?

    I'm trying to set up a demo for a meeting. I want to show how
    you can increase the size of the video.
    Example:
    http://video.google.com/videoplay?docid=-1532523169750528353
    There are two buttons in the bottom right corner of the
    player that will increase the video size.

    I havn't tried this but I would thinkg that this could work:
    If you have a video object on your stage (the object that the video
    actually plays in) you could probably make a button that simply
    changes the dimensions of it such as:
    setProperty("theVideoPlayer",_height, 240);
    setProperty("theVideoPlayer",_width, 320);
    The movie should adjust to fit the screen, however if you
    make the movie larger than or a different aspect ratio than the
    original, it will be blurred or distorted respectively. Make your
    original movie, therefore, at the largest size you want it to be
    seen. Keep the aspect ration the same always.

  • Setting up Jabber Video for TelePresence with QS C20 system

    I am trying to connect  Jabber Video for TelePresence for Mac (Free version)  from home to my office's QuickSet C20 system. Can you tell me what data (addresses etc) I need to have and where to input them to make this work.
    I have downloaded the software on both the mac and ipad and have created an account.
    Can someone help?
    Doug

    Thanks again.
    The info from C20 system is:
    URI 1 :
    [email protected]
    DisplayName :
    Click to edit...
    DefaultTransport :
    Auto
    TlsVerify :
    Off
    Type :
    Standard
    Outbound :
    Off
    Proxy 1
    Discovery :
    Manual
    Address :
    Click to edit...
    Proxy 2
    hope this helps.
    Also what is the difference (in the context of the above connection issues) between iPad o Mac version of Jabber Video.
    doug

  • Is it possible to embed Jabber Video for Telepresence in a webpage?

    Hi, I wanted to ask whether it is possible to incorporate Jabber Video for Telepresence in a webpage so that (registered) users can join or make a call on a website? Or is it only possible to download the application to a PC and run it from there? Thanks!

    That's correct - it is in no way possible to incorporate Jabber Video for Telepresence directly into a web browser, the client must be downloaded and installed on the PC/Mac and/or iPad.
    See your other thread regarding multiple participants;
    https://supportforums.cisco.com/thread/2211227?tstart=0
    /jens
    Sent from Cisco Technical Support Android App

  • Bug? Cisco Jabber Video for TelePresence and spanish keyboard

    Hello everybody,
    because of a customer request I checked Jabber Video with spanish keyboard configured (traditional sort) an figured out, that with this configuration the Jabber Client (tested with 4.2, 4.6 and 4.8.8) doesn't accept the pound key when it is pressed on the keyboard. In Word for example the pound key works as expected. At the moment I told the customer to use the "onboard" keyboard in the Jabber Video client, but I think it is a bug (don't know if it's a bug in Jabber Video or Windows 7). Has anyone experienced the same? Maybe this will be fixed in future?
    Regards, Daniel

    You can have both "free" and "enterprise" versions installed on a Mac.
    If you already have "enterprise" version installed on a PC, and you install the "free" version, the registry settings will be changed and server setting locked to
    https://sjc1-movi-pr-bootproxy-vip.ciscojabbervideo.com/endpoint/configuration
    when you install the "free" version, so ,no, you can't have both versions installed on the same PC.
    You can change the registry settings so it's not locked to the Cisco server, but then you might as well just have the "enterprise" version installed and just edit the internal server settings to use the above URL if you want to make it behave as the "free" version.
    There's no difference, clientwise, between the two, the server settings determines which server it will register with, and provisioning settings will change accordingly.
    /jens

  • Urgent issue with video size and quality.

    Ok, I have Premiere Pro CS4 and I am running on Windows 7 64bit. I have a movie that I have been working on for 2 years that already has hundreds of proper LightScribe DVD's, slim cases and printed cover wraps already done and paid for. I was supposed to already be done with this and selling copies, but Premiere has royally messed things up for me and I am now in limbo with the project.
    The film was recorded with simple non-HD 4:3 camcorders. Some of the footage is from years ago and was uploaded via USB low quality, but it still looks fine on YouTube, my computer, and even when I burned a DVD with the footage alone unedited. The rest was uploaded with via DV and is actually pretty good quality for being 4:3 and non-HD. I took all this footage and stretched it out with a little bit of cropping to make it widescreen on Premiere. Again, it looks great in the preview and looks fine when I exported it as a WMV.
    However, when I burned it to DVD, it was horrible quality and also chopped off the sides of the film on my widescreen TV, even though I exported the film as widescreen AND burned it on the widescreen setting! Why would it do that if it was made, exported and burned as widescreen??? Also the sound was terrible! And I exported on the highest setting possible.
    Second, I heard that AVI is a better format, so I tried that. The file was absolutely huge and when I opened the file with media player it wasn't the same perfect fit as the WMV. What I mean by that is, when I watched the WMV, media player showed the video as a perfect fittig window, no excess black space on the top or bottom. Same thing with several AVI mainstream movies that I have on my computer (actual movies, like Terminator Salvation, Pandorum, Black Hawk Down, etc). They all fit media player perfectly, no excess black on top or bottom. So why is it that actual movies in AVI format and my WMV video and movie files are perfect fit on media player, but when I export an AVI from Adobe Premier, it adds excess black on top and bottom? That doesn't make any sense, especially since you can look at a preview of what the exported file will look like and it doesn't look anything like what the ACTUAL export is. What kind of a joke is this?
    So I pretty much need help figuring out why the exported movie is horrible quality, especially on DVD that is so bad I cannot dare to sell it to a customer, AND I need help figuring out why my Premiere Pro exported AVI's look nothing like mainstream film AVI's that I have on my computer. Someone please help, this is really hurting my business!

    hiya
    well , you are certainly getting some really good help now...its like you fell into a room with the best editors and shooters and everything and you can get a lot of information and run with it...find out a lot of things.
    Some of it requires you follow through on your own as much as possible ( like you have already ) by reading and googling things you dont know, etc...  this forum and these guys is how I learned a lot about this stuff in the past year or so...so listen to what they say....google what you dont understand....you cant go wrong.
    now...about what you said...
    I exported the test clip as  an MPEG2-DVD and it gave me a video file with NO SOUND, a separate WAV  sound file, and two xmp files. This is not what I was looking for.
    I have a movie project on  Adobe Premiere Pro CS4. I simply want to export/publish the movie, burn  it onto a DVD using Windows DVD maker and have it as top quality, like  it looks in the preview monitor on Premiere. Tell me how to do it.---
    I dont use encore to burn a dvd, but use DVDit PRO.  It wants exactly what you got when you exported to mpeg 2 dvd ....a video file without sound muxed.. and a separate wav file....
    I know it sounds weird but thats the way the program burns the DVD....and that has to do with making the VOB files etc for the DVD...which is just the way it is....you see the vob files AFTER you burn the DVD if you look in the DVD...
    anyway, mpeg 2, mpeg 4, all that highly compressed stuff ( as you said ) is highly compressed to FIT onto the media ( DVD ) or whatever....but it plays good and it looks good...and has NOTHING to do with anything except squishing stuff down to fit the media and looking ( viewing ) GOOD.  the best movie you ever saw on DVD is mpeg 2 .....  turned into vob in the making of the DVD by the software that makes the DVD.
    all these things are different animals ...what you edit , what you deliver, etc ....

  • Join video with diferent video size

    Hi, I have this problem, I use QuickTime Pro to join clips in one large/single Mp4 file, some clips have diferent video size and when you join them a white space appears in the video, this example is from ''Peter Ganriel - Play The Videos: http://www.vendocasalasaguilas.com/QuickTime.JPG
    What I need is how to center the video and dissapear or convert the white space in black space
    Anothe question: when I play a Mp4 in QuickTime in MAC and then the same Mp4 in PC I see a lot of diferent in video quality, in MAC is much better the video quality, my question is there something to do to improve the video quality in PC or not.
    Thanks in advance

    Open the Movie Properties window and single click on a video track to highlight.
    In the lower half of the window click the "Visual Settings" tab.
    This is where you adjust dimensions, offset and track layers. Make either one track smaller or the other larger to help "align" them.
    Default add uses an offset of 0,0 (upper left).

  • Rendering .flv with cue points but maintaining video size

    When I render an .flv by exporting in After Effects I cannot get cue points however when I import the .flv to a Flash doc, the controller is the same width as the video.
    However, in order to get cue points, you have to add the video to the Render Queue in AE in order to see the cue points in Flash. But the video controller ends up wider than the video itself when imported to Flash.
    My video is 495 wide by 360 high. When I render in AE in the Render Queue, and then import to a Flash doc, the video controller is about 30 pixels wider on both the left and right of the video. This looks goofy. Is their a way to resolve this?
    Thank you.

    Thank you for responding. I tried to but what happens is that that there is about 15 pixels of black space on the left and 15 pixels on the right side of he video. This does not happen when I export to Flash, only when I add to the Render Queue.
    So If I adjust the video size in Flash, the video size changes however the black space still remains. Somehow AE is creating extra space black space on both sides of the .flv. Again, this does not happen when export to .flv.

  • Recording with iSight - Video Size option missing

    Ok, I hope someone can help me. I record video directly into iMovie using the built in isight on my mac. On the import window using the camera I used to have the option on the bottom to select the video size (640x480 or 1024x576). For some reason this is missing (the bottom frame is blank except for the camera selection options).
    I can't figure out how to get the higher resolution option back. Where did it go? Help!
    Thanks.

    I now use iMovie9 and Lion 10.7.2.  The choice bar is gone for me, too!
    To validate your experience, I started a new wide-screen project and imported from inbuilt iSight.  After dragging the new capture event into the new project, I clicked the "crop" button and found that all the resolution is still there!  I can  crop or re-frame by dragging the crop bars or area.  However, I cannot select the entire frame for inclusion in my project. 
    Based on this, it seems to me that full frame iSight recording has been sacrificed, probably so stabilization can use the edges.
    Unless someone else knows a way, it seems to me that if we want the old choices bar back, we will need to retreat to an older version.
    Mac Pro Quad Core (Early09) 2.93Ghz OSX 10.7.2   24" LED Cinema Display
    MBP 15" i7  (Early'11) OSX 10.7.2                 13" MBP (Mid'09) 2.26GHz OSX 10.7.2

  • DVD Studio Pro - Problem with video size

    Hello all,
    I'm having a problem with dvd studio pro.
    I have a project that I edited in FCP, then compressed to the default DVD setting in compresser, then imported the video as an asset in DVD studio pro. I'm trying to create a SD dvd, and whenever I simulate the dvd, the video plays with some of the left side cropped out. I have text that is cut off because of it. This has never happened before, and I have checked again and again to make sure its all set on SD. I'm pretty new to fcp studio, i'm teaching myself as I go and this is driving me crazy. I have made a bunch of dvd's prior, and this has never happened, so I have no idea what I did to mess things up.
    For all I know, the problem may not even have to do with dvd studio, it may be in compresser. I have also played around with that, to no avail.
    Thanks for the help!
    Thomas

    Thanks Javabob,
    That is a way good idea. While trying your suggestion i stumbled upon the problem, I have no idea why i never noticed this before. When i got to the step of importing it as an asset into dvd studio, i clicked on the video track and the inspector box for it showed up, then i noticed it had a display mode drop down menu set on '16:9' pan-scan. I then changed it to 16:9 letter-box and the simulation video fits correctly onto the screen. I don't really understand the reason why pan-scan blew it up like that, but it is fixed now. I still don't recall ever having to do this before, but oh well. I will pay attention to the inspector window for the videos more carefully from now on.
    Thanks for the help Javabob!

  • Sharing video file with non CC member

    Dear All,
    I have to share a large video file with a client who is NOT a creative cloud subscriber.  Can I do that?  How does the other person gain access to my creative cloud storage in order to download the video?  I am a Creative Cloud monthly subscriber.  Thanks
    Small Town Gal

    Thanks Nancy.
    Creative Cloud Connection
    The install for Creative Cloud Connection ("desktop sync") is available from the Creative Cloud Apps page at https://creative.adobe.com/apps or from the Adobe Application Manager. But it seems you already have it installed an just need to launch it.
    Which operating system are you on? On Windows you can launch Creative Cloud Connection from the Start Menu, and on Mac OS X from the Applications folder. Once launched it will re-open upon computer restart by default. You can change this if wanted via the Preferences.
    Your Online File Storage
    Just sign in with your Adobe ID at https://creative.adobe.com. You should see a Files menu in the top left of the web application.
    From the Actions menu you can choose Upload to upload files. You can also drag and drop upload files (but not folders) from the Windows Explorer / Mac OS X Finder to the browser.
    As a subscriber you should take advantage of the 20 GB storage provided for an individual subscription. There are some restrictions we have around certian file types, but we are working to improve that.

  • Cisco Jabber Video Crashes anonymously..

    Hi All,
    Jabber video software  crashed while doing the Far-end Camera Control. This was so strange and it forced me to start the application again.
    please follow the below mentioned procedure to reproduce the same issue.
    Make a point to point video call from your jabber video.
     Click on Far-end camera control button and keep the option available there.
    Ask the remote guy to press pause on their side.
    There will not be any video coming from remote endpoint but the Far-end camera control option will remain there, now if you try to control the remote camera will give you an error.
    Thanks & Regards
    Nikhil Jayan

    Here are recommended guest access services:
    CMR-Cloud -  Allows guest access through WebEx for customers with Telepresence infrastructure for endpoint registration and want conferencing from the cloud.   Details can be found at http://www.cisco.com/go/cmrcloud
    CMR-Hybrid -  Allows guest access through WebEx for customers with Telepresence infrastructure for registration and conferencing.   Details can be found at http://www.cisco.com/c/en/us/solutions/collaboration/telepresence-webex-working-together/index.html
    Jabber Guest – Allows enterprise to embed Jabber into applications and websites to enable inbound calling.  Details can be found at http://www.cisco.com/c/en/us/products/unified-communications/jabber-guest/index.html
    Project Squared – Project Squared offering allows simple and secure place to collaborate — with anyone, anywhere.     Details can be found at www.projectsquared.com   
    These were shared with Cisco Sales and Cisco partners.   Only Project Squared was shared with end users as the service as that service is the only one directly available to an end user.

  • Can I backup two devices (with different documents) to one iCloud account?  For example: iPad and iPhone, not everything is synced between the two, but I would like to backup each (seperately in the cloud), is this possible?

    Hello Apple Community,
    Can I backup two devices (with different documents) to one iCloud account? 
    For example: iPad Air and iPhone 5, not everything is synced between the two, but I would like to backup each (seperately in the cloud).  Is this possible?
    This way when I change from an old ipad to a new, I can restore with the ipad backup, and when I change from an old iphone to a new, I can restore from the
    iphone backup.
    Thank you in advance!

    Terminology check here. Do you really mean a "CD"?  There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
    Read references for Home Sharing.
    iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
    Home Sharing Support page - http://www.apple.com/support/homesharing/
    iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
    The above can get pretty complicated.  You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content.

  • How can I register for a jabber video account

    Anybody figured out how to register for the above when you already have a Cisco login?
    I have three e-mail addresses which, over the years of CCNA and network support, I've used to register with Cisco. Now, when I try to register for telepresence, it tells me the addresses are in use. There must be a way of extending an existing Cisco account to access Jabber (or am I being naive?).

    Hi Steve,
    Free Cisco Jabber Video accounts can be obtained from www.ciscojabbervideo.com.  If your email accounts are already in use, then use the forgot password link to reset your password.
    If you are referring to a different product of Jabber Video, please reference the link you are inquiring about.  It's possible you may have to call TAC for further assistance, but please specify further if the above is not what you are looking for.
    Regards,
    Jason

  • Final Cut Pro X Exported Video Size

    I've recently bought Final Cut Pro X and use it for editing videos before uploading to YouTube.  I used to export my videos from iMovie as a .mov file to my hard drive to then manually upload to YouTube.  There doesn't seem to be this option in Final Cut, so I've taken to using the YouTube share feature but it never uploads so I just manually upload the .mov file that it saves somewhere in the Final Cut shared files folder.
    The problem I have is that I export a 720P file so assumed that the video size would be 1280 x 720, it always was with iMove.  I've found that Final Cut spits out the video at 1248 x 702 and this is quite annoying as it sometimes cuts off the top and bottom of a video.  Is there any reason why it does this or any way to get it to export at the correct display size?

    How can I change the size? Normally I export at 720P in iMovie and the video and format are both 1280 x 720.  I did a screencast using Quicktime and due to the change in display size it's chopped off the toolbar at the top and a small portion of the dock.  I've had to resize the clip in Final Cut to 95% of the original size to get it to fit in the 1248 x 702 size that it chooses to put it in.
    As this was only a screencast the file size tends to be this small, but normally I shoot at full HD on my camcorder and the video can be about 10 mins in length.  I used the export media function and the resulting file was about 8GB in size!  iMovie would typically give me a .mov file anywhere between 700MB - 1.5GB depedning on the length of the video and that suited me fine, but there doesn't seem to be any way to get it that small using the Export Media.  Not much of a problem really coz I'm fine using the YouTube share option to get what I want.

Maybe you are looking for