Jabber voicemail address cert warning

Hello.
I hope someone can help me with this.
I have tried to change all setting to use FQDN and also adde certificates issued by our internal PKI.
it works for CUCM and IM&P connections, but jabber still complains that on the certificate for VM.
What I see under connection status is that Jabber is still trying to connect to the IP address of VM not the FQDN.
I expect that is why i am getting the certificate warning. But how do I change this?
I have changed the UC Service in CUCM to the FQDN but still the same.
Anyone that can help me?
-Alex

Can you check under the uc service menu to look for the mailstore ( exchange) ; is this also corrected to the use the fqdn for unity connection server.
If this is also corrected and you are still seeing that jabber attempts to connect to the ip address; please make sure that you try to delete the local cache from your windows PC; ( provided this is being tested on jabber for windows).
here is the location that you look for to search for the cache folder;
For Windows 7:
a) C:\Users\<user>\AppData\Local\Cisco\Unified Communications
b) C:\Users\<user>\AppData\Roaming\Cisco\Unified Communications'
In order to remove the cache you will need to delete the jabber sub folder which is uder the unified communications folder ; and then try to re enter the log in credentials and server details in jabber and connect to check if now you see jabber for windows referencing the FQDN instead of the ip address.
Please note that by deleting the cache folder on the PC where jabber is installed; you will loose all the recent im's that you typed or received. Also you will need to re enter the log in credentials to log in.

Similar Messages

Jabber voicemail issue

When we click on the voicemail icon within Jabber, we get "You are not signed in to your voicemail account. Go to the phone accounts tab..."
When I go to File>Options>phone accounts and and enter my AD credentials for username and password, it says the username or password is not correct.
Am I entering the correct info for the username and password? Everything is sync'd with LDAP.
Thank you.

This may not be your case, but I had this same exact issue last week and it was because the Server Admin had changed the password to the account we used as the CN in our LDAP authentication. Once I updated the password in CUC, the problem was resolved. So, doesn't hurt to ensure the credentials are still good.

Jabber Voicemail Incorrect Time Stamp

I just noticed the the time stamp on my voicemails in Jabber v9.0.1 Build 12296 have the incorrect time stamp. They are all one hour behind. I confirmed that this does not happen in any of the following:
Jabber v9.0.5
CUPC v8.6
Jabber for Mac v8.6.1
Is this happening to anyone else?

did you get this sorted out? Im having the same problem with Jabber v9.1.5, CUC 9.1.2 and cucm 9.1.2. Both cuc and cucm use the same NTP time source. Time looks fine on the handsets and from the cli..

Hardware Address error/warning

anyone ever see this during a setup?
WARNING: Hardware address cc:cc:cc:dd:dd:dd trying to be our address 192.168.10.10
I'm setting up a T2000 and going through newtwork setup, but on boot up I get that error/warning.
any thoughts?

That's a network configuration issue.
A generic IP address conflict.
As it states, there's another computer on your subnet that's already using that IP.
A Google search with "hardware address trying to be " keywords gets you 4,180,000+ results on this issue.
Pick a different IP for your new system,
or find that other system and have it use a different IP.

Business Address Service - Warning instead of error

Hello together,
i start to work with the Business Address Service. It's a smart tool and easy to handle but i'm a little confused about the error-handling. If i create a business partner and enter a RIGHT postal code i'm getting an error. But if a change this bp and enter a WRONG postel code i'm getting only a warning and the bp will be saved.
I searched in the SAP documentation and found the following information
"If a value is not contained in the corresponding check table, this is regarded as an error and the address is rejected.
To avoid incorrect entries, you can use the F4 Help for the relevant fields."
That's not true in our system. Are there any parameters i have to maintain?
Best regards
Sascha

I'm so sorry you're having issues submitting an email- how very frusterating! Let me check into some alternatives for you.
Either I or one of my colleagues will be back with suggestions soon.
Thanks,
Heather

Ie 11 ignore cert warning

I am trying to access a website with an invalid cert but there is no ignore option presented by ie11.
DO NOT TELL ME I SHOULD NOT GO TO THE SITE BECAUSE OF THE WARNING. I AM NOT ASKING FOR YOUR SECURITY ADVICE, I AM ASKING HOW TO IGNORE CERT ERRORS IN IE11.
i tried adding to trusted sites and messing with settings and it made no difference.

Hello Hello MARK D ROCKMAN,
What is your current situation?
What the website do you mean?
Please share us for test.
You may try the below mentioned link to reset internet explorer settings.
https://support.microsoft.com/kb/923737?wa=wsignin1.0#top
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Renew Exchange 2007 self signed SSL cert : Warning

Hi,
We are getting an issue with the new SSL certificate being created.
WARNING: This certificate will not be used for external TLS connections with an
FQDN of 'mail1.[mydomain.com]' because the CA-signed certificate with thumbprint
'1B6705DB9755A75E94F5B05081AEDED3A0065D4A' takes precedence. The following
connectors match that FQDN: Send to Internet.
Heres the code below:
[PS] C:\Windows\System32>get-exchangecertificate | list
AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System
                     .Security.AccessControl.CryptoKeyAccessRule}
CertificateDomains : {mail1.[mydomain.com], mail1.[mydomain.ph], autodiscover.mydomain
                     .com, autodiscover.[mydomain.ph], PPLOEX2K7.[mydomain.ph], PPLOE
                     X2K7, mail1, localhost, [mydomain.com], [mydomain.ph]}
HasPrivateKey      : True
IsSelfSigned       : False
Issuer             : CN=mydomain-WIN-0RCZ5TKMHLV-CA, DC=mydomain, DC=ph
NotAfter           : 7/23/2014 1:46:15 PM
NotBefore          : 7/23/2012 1:46:15 PM
PublicKeySize      : 2048
RootCAType         : Enterprise
SerialNumber       : 52F90CEC000000000005
Services           : IMAP, POP, IIS
Status             : Valid
Subject           : CN=mail1.[mydomain.com], OU=IT, O=Mydomain, L=Pasig, S=NCR, C=
                     ph
Thumbprint         : 1B6705DB9755A75E94F5B05081AEDED3A0065D4A
AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System
                     .Security.AccessControl.CryptoKeyAccessRule, System.Securi
                     ty.AccessControl.CryptoKeyAccessRule}
CertificateDomains : {mail1.[mydomain.com], autodiscover.[mydomain.ph], autodiscover.
                     [mydomain.com], pploex2k7.[mydomain.ph], mail1.[mydomain.ph]}
HasPrivateKey      : True
IsSelfSigned       : False
Issuer             : CN=mydomain-WIN-0RCZ5TKMHLV-CA, DC=mydomain, DC=ph
NotAfter           : 7/23/2014 11:44:05 AM
NotBefore          : 7/23/2012 11:44:05 AM
PublicKeySize      : 2048
RootCAType         : Enterprise
SerialNumber       : 5289341C000000000003
Services           : IMAP, POP, SMTP
Status             : Valid
Subject            : CN=mail1.[mydomain.com], OU=IT, O=Mydomain, L=Pasig, S=NCR, C=
                     ph
Thumbprint         : 99A3CAC2E18E2FA4AB4C855A3FA07E3369AA4ABB
[PS] C:\Windows\System32>get-exchangecertificate 1B6705DB9755A75E94F5B05081AEDED
3A0065D4A | New-ExchangeCertificate
WARNING: This certificate will not be used for external TLS connections
with an FQDN of 'PPLOEX2K7.[mydomain.ph]' because the CA-signed certificate
with thumbprint '1B6705DB9755A75E94F5B05081AEDED3A0065D4A' takes
precedence. The following connectors match that FQDN: Default PPLOEX2K7.
WARNING: This certificate will not be used for external TLS connections
with an FQDN of 'mail1.[mydomain.com]' because the CA-signed certificate
with thumbprint '1B6705DB9755A75E94F5B05081AEDED3A0065D4A' takes
precedence. The following connectors match that FQDN: Send to Internet.
Confirm
Overwrite existing default SMTP certificate,
'99A3CAC2E18E2FA4AB4C855A3FA07E3369AA4ABB' (expires 7/23/2014 11:44:05
AM), with certificate 'F835E526BC8D3805E7AA230A17C5971872D3759C'
(expires 7/22/2015 10:17:51 AM)?
[Y] Yes [A] Yes to All [N] No [L] No to All [S] Suspend [?] Help
(default is "Y"):y
Thumbprint                                Services
Subject
F835E526BC8D3805E7AA230A17C5971872D3759C .....      C=ph, S=NCR, L=Pasig, O...
[PS] C:\Windows\System32>get-exchangecertificate | list
AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System
                     .Security.AccessControl.CryptoKeyAccessRule, System.Securi
                     ty.AccessControl.CryptoKeyAccessRule, System.Security.Acce
                     ssControl.CryptoKeyAccessRule}
CertificateDomains : {mail1.[mydomain.com], mail1.[mydomain.ph], autodiscover.mydomain
                     .com, autodiscover.[mydomain.ph], PPLOEX2K7.[mydomain.ph], PPLOE
                     X2K7, mail1, localhost, [mydomain.com], [mydomain.ph]}
HasPrivateKey      : True
IsSelfSigned       : True
Issuer             : C=ph, S=NCR, L=Pasig, O=Mydomain, OU=IT, CN=mail1.mydomain.c
                     om
NotAfter           : 7/22/2015 10:17:51 AM
NotBefore          : 7/22/2014 10:17:51 AM
PublicKeySize      : 2048
RootCAType         : None
SerialNumber       : 6B5A6E27C63C36A54FDD3E07FF982497
Services           : IMAP, POP, SMTP
Status             : Valid
Subject            : C=ph, S=NCR, L=Pasig, O=Mydomain, OU=IT, CN=mail1.mydomain.c
                     om
Thumbprint         : F835E526BC8D3805E7AA230A17C5971872D3759C
AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System
                     .Security.AccessControl.CryptoKeyAccessRule}
CertificateDomains : {mail1.[mydomain.com], mail1.[mydomain.ph], autodiscover.mydomain
                     .com, autodiscover.[mydomain.ph], PPLOEX2K7.[mydomain.ph], PPLOE
                     X2K7, mail1, localhost, [mydomain.com], [mydomain.ph]}
HasPrivateKey      : True
IsSelfSigned       : False
Issuer             : CN=mydomain-WIN-0RCZ5TKMHLV-CA, DC=mydomain, DC=ph
NotAfter           : 7/23/2014 1:46:15 PM
NotBefore          : 7/23/2012 1:46:15 PM
PublicKeySize      : 2048
RootCAType         : Enterprise
SerialNumber       : 52F90CEC000000000005
Services           : IMAP, POP, IIS
Status             : Valid
Subject            : CN=mail1.[mydomain.com], OU=IT, O=Mydomain, L=Pasig, S=NCR, C=
                     ph
Thumbprint         : 1B6705DB9755A75E94F5B05081AEDED3A0065D4A
AccessRules        : {System.Security.AccessControl.CryptoKeyAccessRule, System
                     .Security.AccessControl.CryptoKeyAccessRule, System.Securi
                     ty.AccessControl.CryptoKeyAccessRule}
CertificateDomains : {mail1.[mydomain.com], autodiscover.[mydomain.ph], autodiscover.
                     [mydomain.com], pploex2k7.[mydomain.ph], mail1.[mydomain.ph]}
HasPrivateKey      : True
IsSelfSigned       : False
Issuer             : CN=mydomain-WIN-0RCZ5TKMHLV-CA, DC=mydomain, DC=ph
NotAfter           : 7/23/2014 11:44:05 AM
NotBefore          : 7/23/2012 11:44:05 AM
PublicKeySize      : 2048
RootCAType         : Enterprise
SerialNumber       : 5289341C000000000003
Services           : IMAP, POP, SMTP
Status             : Valid
Subject            : CN=mail1.[mydomain.com], OU=IT, O=Mydomain, L=Pasig, S=NCR, C=
                     ph
Thumbprint         : 99A3CAC2E18E2FA4AB4C855A3FA07E3369AA4ABB
Services: [PS] C:\Windows\System32>Enable-ExchangeCertificate -Thumbprint F835E5
26BC8D3805E7AA230A17C5971872D3759C -Service IIS, SMTP, IMAP, POP
WARNING: This certificate will not be used for external TLS connections with an
FQDN of 'PPLOEX2K7.[mydomain.ph]' because the CA-signed certificate with
thumbprint '1B6705DB9755A75E94F5B05081AEDED3A0065D4A' takes precedence. The
following connectors match that FQDN: Default PPLOEX2K7.
WARNING: This certificate will not be used for external TLS connections with an
FQDN of 'mail1.[mydomain.com]' because the CA-signed certificate with thumbprint
'1B6705DB9755A75E94F5B05081AEDED3A0065D4A' takes precedence. The following
connectors match that FQDN: Send to Internet.
[PS] C:\Windows\System32>

Hi Jammizi,
I collect some information from the command results as below:
1. When run Get-ExchangeCertificate | FL command, it returned 2 certificates.
•Certificate01
Thumbprint         : 1B6705DB9755A75E94F5B05081AEDED3A0065D4A
IsSelfSigned       : False
Services           : IMAP, POP, IIS
•Certificate02
Thumbprint         : 99A3CAC2E18E2FA4AB4C855A3FA07E3369AA4ABB
IsSelfSigned       : False
Services           : IMAP, POP, SMTP
2. When run Get-ExchangeCertificate 1B….4A (Certificate01) | New-ExchangeCertificate, got warning.
   Overwrite Certificate02 (99…BB) to Certificate03 (F8…9C).
3. When run Get-ExchangeCertificate | FL command, it returned 3 certificates.
•Certificate03
Thumbprint         : F835E526BC8D3805E7AA230A17C5971872D3759C
IsSelfSigned       : True
Services           : IMAP, POP, SMTP
•Certificate01
Thumbprint         : 1B6705DB9755A75E94F5B05081AEDED3A0065D4A
IsSelfSigned       : False
Services           : IMAP, POP, IIS
•Certificate02
Thumbprint         : 99A3CAC2E18E2FA4AB4C855A3FA07E3369AA4ABB
IsSelfSigned       : False
Services           : IMAP, POP, SMTP
4. When run Enable Certificate03 command, got warning.
According to the information above, please notice that both Certificate01 and Certificate02 are not Self-signed certificate. And the New-ExchangeCertifiate command in Exchange 2007 server is to new an Exchange Self-signed certificate. I suggest double check
whether your org has self-signed certificates. If your org only need 3rd party certificates without self-signed certifcate, I suggest apply a new certificate from CA.
Thanks
Mavis
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

When trying to set up Sync account and enter my actual password, I get an "invalid email address"warning. Help...

When I go into Sync and try to set up an account, I am asked for email address (which is <[email protected]>. Immediately as I enter the "meinig58" the "invalid email address" red warning comes up. How do I solve this problem and establish my Sync account?

Write the whole email address and wait for a second to validate it.
The validator tells you that you have entered the wrong email until you finish typing a valid one. Developers are working to fix it.

Wscompile warning ignoring port ... no SOAP address

Hi, all
I'm trying to run wscompile from wsdl file to get the client binding and getting the above message. The wsdl is too large to place here. All I can say is the SOAP address is specified for the PORT element with valid URL. Here is the fragment of it:
<service name="C3MortgageService">
- <port binding="tns:C3MortgageBinding" name="C3MortgagePort">
<soap:address location="http://tsta.net.na.abnamro.com:3001/CICS/CWBA/DFHWSDSH/ABNWSDSP" />
</port>
</service>
The error message is:
warning: ignoring port "C3MortgagePort": no SOAP address specified
warning: Service "C3MortgageService" does not contain any usable ports
Does anyone have any idea?
I'd appreciate any suggestions/comments/tips?
Thanks a lot.

I know you said the WSDL is large but could you try to prune it down to a point where it still generates the same error, then post it here in the forum. Thanks.

Jabber for Windows 9.1 external contact adding

I have a Jabber for Windows 9.1 deployment, and I can't add external contacts. The external contacts in this case are on a federated OCS deployment with the same LDAP. If I add them in the user options page and restart they work fine. My LDAP searches only return the local jabber domain directory.
Anyway, a quick look around shows me that adding external contacts in Jabber 9.0 was not supported, but it was supposed to be added in 9.1. Is this not the case?

Yeah the problem is that that will add the local jabber IM address rather than the LDAP one since the user exists in both directories.
e.g. jabber domain = tst.local
OCS = test.com
if you add the [email protected] as a contact then it will replace it with [email protected]
If you add [email protected] in the user options page and restart jabber it works
edit: anyone know how to unmark a reply as the correct answer, accidentally clicked on that instead of reply

How do you stop sms messages automatically being sent to an email address instead of a phone number?

I have noticed that sometimes (particularly when sending an sms to multiple people) my iphone 4s will send the message to peoples email addresses. This happens despite there being a phone number listed on the contact. You would have thought that an sms would automatically send to a phone number if there is one available for the contact, but instead it is sending the sms to an email address without warning. This results in me being charged for an mms and the recipient not recieving the text at their phone number. It happens when sending messages to both iphone users and non iphone users.
Does anyone know a way of fixing this?

I think its fixed. I had to sign iMessages in on my Apple ID, but then deselect my email addresses to make it behave the way it should. Now if I could get iMessage to only send response alerts to the last device I used, instead of late night texts going to every device I own in the house and waking everyone up.
For some reason, the free iCloud address I automatically received (when Apple was trying to force people to leave Mac.com) is "hardwired" into iMessage. People were also getting texts from that address even though I was on my phone. I tried to delete it but iOS tells me I can't. I don't use that address, I won't ever use it, too bad I can't make it go away.

Over usage of my allowance by 67gb with no warning

i have just found out that i have a bill for £180.00 for over usage of my broadband. for the quarter it was 38gb one month then 67gb then 30gb over. because i hadnt checked my bank account to see this money coming out i had no idea. bt say they did warn me via an email that i was getting close but i had never received them. when i asked them where they were sending the email i hadnt heard of that address. i tried to log on to the address they gave me but it doesnt exist so how could they warn me. i have logged on to my account now with the email address that i chose when i set up the account so why were they not sending emails to that address. i am extremely unhappy with this service and will be taking it up with ofcom. i do not disagree with the overusage but if i had have been warned i could have upgraded my account the first time it happened and saved myself a fortune.
has this happened to anyone else and if so how did you resolve it.

amchimneys wrote:
i have just found out that i have a bill for £180.00 for over usage of my broadband. for the quarter it was 38gb one month then 67gb then 30gb over. because i hadnt checked my bank account to see this money coming out i had no idea. bt say they did warn me via an email that i was getting close but i had never received them. when i asked them where they were sending the email i hadnt heard of that address. i tried to log on to the address they gave me but it doesnt exist so how could they warn me. i have logged on to my account now with the email address that i chose when i set up the account so why were they not sending emails to that address. i am extremely unhappy with this service and will be taking it up with ofcom. i do not disagree with the overusage but if i had have been warned i could have upgraded my account the first time it happened and saved myself a fortune.
has this happened to anyone else and if so how did you resolve it.
Hi.
I find this rather weird, and certainly sounds wrong.
May I suggest you click on my shortcuts, and use option 12b. If it requests a login with a Yahoo! ID - enter your full email address you initially chose. The resultant screen will do one of two things. (a). It will either allow you to add sub accounts towards the bottom of the page - this means the account is a primary, or (b) it will actually tell you the email address of the primary account.
If (a), then hopefully a forum mod can sort out this problem as you will clearly have been given incorrect details on initial setup.
If (b), then again a forum mod should be able to get to the bottom of why you were not informed of the primary email address and login details.
I am actually surprised that BT told you the email address the warning emails were being sent - I assume that you gave them your security details, in which case could mean option (b) above is relevant.
You will probably not be able to login to the "other" email address as either it's not yours (my scenario 'a') or it will be a different password to your other account.
There are ways to tell if an account is active, rather than inaccessible.
Go to [https://login.yahoo.com/config/login?] and enter the email address you were given by BT and a password - if it comes back with "This ID is not yet taken", then the account doesn't exist. If is says "Invalid ID or password", then that typically means a wrong password, but the email address exists.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Wscompile No SOAP address specified

I have seen this same post over and over again. I haven't seen a single real answer for it. SO here we go again.....
warning: ignoring port "HelloHttpGet": no SOAP address specified
warning: ignoring port "HelloHttpPost": no SOAP address specified
these are the errors. I read a bug article based on this, but it was in regards to a .Net project and not a java one.
I would assume that if those ports were ignored, my project won't work, so i really really need to figure this out.
here is my config.xml
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<wsdl location="Hello.wsdl"
packageName="com.c2bmc"/>
</configuration>
and here is my wsdl
<?xml version="1.0" encoding="utf-8"?>

<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:conv="http://www.openuri.org/2002/04/soap/conversation/" xmlns:cw="http://www.openuri.org/2002/04/wsdl/conversation/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:jms="http://www.openuri.org/2002/04/wsdl/jms/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.openuri.org/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.openuri.org/">
<types>
<s:schema elementFormDefault="qualified" targetNamespace="http://www.openuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema">
<s:element name="getPlanList">
<s:complexType>
<s:sequence/>
</s:complexType>
</s:element>
<s:element name="getPlanListResponse">
<s:complexType>
<s:sequence>
<s:element name="getPlanListResult" type="s:string" minOccurs="0"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="string" nillable="true" type="s:string"/>
</s:schema>
</types>
<message name="getPlanListSoapIn">
<part name="parameters" element="s0:getPlanList"/>
</message>
<message name="getPlanListSoapOut">
<part name="parameters" element="s0:getPlanListResponse"/>
</message>
<message name="getPlanListHttpGetIn"/>
<message name="getPlanListHttpGetOut">
<part name="Body" element="s0:string"/>
</message>
<message name="getPlanListHttpPostIn"/>
<message name="getPlanListHttpPostOut">
<part name="Body" element="s0:string"/>
</message>
<portType name="HelloSoap">
<operation name="getPlanList">
<input message="s0:getPlanListSoapIn"/>
<output message="s0:getPlanListSoapOut"/>
</operation>
</portType>
<portType name="HelloHttpGet">
<operation name="getPlanList">
<input message="s0:getPlanListHttpGetIn"/>
<output message="s0:getPlanListHttpGetOut"/>
</operation>
</portType>
<portType name="HelloHttpPost">
<operation name="getPlanList">
<input message="s0:getPlanListHttpPostIn"/>
<output message="s0:getPlanListHttpPostOut"/>
</operation>
</portType>
<binding name="HelloSoap" type="s0:HelloSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="getPlanList">
<soap:operation soapAction="http://www.openuri.org/getPlanList" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<binding name="HelloHttpGet" type="s0:HelloHttpGet">
<http:binding verb="GET"/>
<operation name="getPlanList">
<http:operation location="/getPlanList"/>
<input>
<http:urlEncoded/>
</input>
<output>
<mime:mimeXml part="Body"/>
</output>
</operation>
</binding>
<binding name="HelloHttpPost" type="s0:HelloHttpPost">
<http:binding verb="POST"/>
<operation name="getPlanList">
<http:operation location="/getPlanList"/>
<input>
<mime:content type="application/x-www-form-urlencoded"/>
</input>
<output>
<mime:mimeXml part="Body"/>
</output>
</operation>
</binding>
<service name="Hello">
<port name="HelloSoap" binding="s0:HelloSoap">
<soap:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
<port name="HelloHttpGet" binding="s0:HelloHttpGet">
<http:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
<port name="HelloHttpPost" binding="s0:HelloHttpPost">
<http:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
</service>
</definitions>
Thanks for anyone who takes the time to help.
Jason

I have seen this same post over and over again. I haven't seen a single real answer for it. SO here we go again.....
warning: ignoring port "HelloHttpGet": no SOAP address specified
warning: ignoring port "HelloHttpPost": no SOAP address specified
these are the errors. I read a bug article based on this, but it was in regards to a .Net project and not a java one.
I would assume that if those ports were ignored, my project won't work, so i really really need to figure this out.
here is my config.xml
<?xml version="1.0" encoding="UTF-8"?>
<configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
<wsdl location="Hello.wsdl"
packageName="com.c2bmc"/>
</configuration>
and here is my wsdl
<?xml version="1.0" encoding="utf-8"?>

<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:conv="http://www.openuri.org/2002/04/soap/conversation/" xmlns:cw="http://www.openuri.org/2002/04/wsdl/conversation/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:jms="http://www.openuri.org/2002/04/wsdl/jms/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.openuri.org/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.openuri.org/">
<types>
<s:schema elementFormDefault="qualified" targetNamespace="http://www.openuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema">
<s:element name="getPlanList">
<s:complexType>
<s:sequence/>
</s:complexType>
</s:element>
<s:element name="getPlanListResponse">
<s:complexType>
<s:sequence>
<s:element name="getPlanListResult" type="s:string" minOccurs="0"/>
</s:sequence>
</s:complexType>
</s:element>
<s:element name="string" nillable="true" type="s:string"/>
</s:schema>
</types>
<message name="getPlanListSoapIn">
<part name="parameters" element="s0:getPlanList"/>
</message>
<message name="getPlanListSoapOut">
<part name="parameters" element="s0:getPlanListResponse"/>
</message>
<message name="getPlanListHttpGetIn"/>
<message name="getPlanListHttpGetOut">
<part name="Body" element="s0:string"/>
</message>
<message name="getPlanListHttpPostIn"/>
<message name="getPlanListHttpPostOut">
<part name="Body" element="s0:string"/>
</message>
<portType name="HelloSoap">
<operation name="getPlanList">
<input message="s0:getPlanListSoapIn"/>
<output message="s0:getPlanListSoapOut"/>
</operation>
</portType>
<portType name="HelloHttpGet">
<operation name="getPlanList">
<input message="s0:getPlanListHttpGetIn"/>
<output message="s0:getPlanListHttpGetOut"/>
</operation>
</portType>
<portType name="HelloHttpPost">
<operation name="getPlanList">
<input message="s0:getPlanListHttpPostIn"/>
<output message="s0:getPlanListHttpPostOut"/>
</operation>
</portType>
<binding name="HelloSoap" type="s0:HelloSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document"/>
<operation name="getPlanList">
<soap:operation soapAction="http://www.openuri.org/getPlanList" style="document"/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<binding name="HelloHttpGet" type="s0:HelloHttpGet">
<http:binding verb="GET"/>
<operation name="getPlanList">
<http:operation location="/getPlanList"/>
<input>
<http:urlEncoded/>
</input>
<output>
<mime:mimeXml part="Body"/>
</output>
</operation>
</binding>
<binding name="HelloHttpPost" type="s0:HelloHttpPost">
<http:binding verb="POST"/>
<operation name="getPlanList">
<http:operation location="/getPlanList"/>
<input>
<mime:content type="application/x-www-form-urlencoded"/>
</input>
<output>
<mime:mimeXml part="Body"/>
</output>
</operation>
</binding>
<service name="Hello">
<port name="HelloSoap" binding="s0:HelloSoap">
<soap:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
<port name="HelloHttpGet" binding="s0:HelloHttpGet">
<http:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
<port name="HelloHttpPost" binding="s0:HelloHttpPost">
<http:address location="http://localhost:7001/FirstJWSProject/Hello.jws"/>
</port>
</service>
</definitions>
Thanks for anyone who takes the time to help.
Jason

Type of cert needed for anyconnect ikeV2

Hi Everyone,
I have created CSR for anyconnect IkeV2.
When i ask the cert vendor what should i ask them that which type of cert i needed for IkeV2?
We do not want users to use ssl like https://xyz.com and connect and download the client.
We want users machine pre installed with anyconnect and profile and connect using IkeV2.
Regards
Mahesh

Hi Marvin,
I got cert from Entrust.
it has 3 options server cert,root cert and chain cert.
i installed the server cert on the ASA and now status of cert has changed from pending.
When i connect to anyconnect ikev2 it still gives me cert warning line non trusted cert.Do i need to do any config change in anyconnect ikev2?
Regards
Mahesh

Repair Permissions WARNING msgs?

I am trying to upgrade to Snow and have the following (partial) list of issues when I repair my disk permissions:
Permissions differ on "System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/AppleMobile DeviceHelper.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/AppleMobile Sync.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Printers/EPSON/EPSON PIC Folder", should be drwxrwxr-x , they are drwxrwxrwx .
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/Extensions/webdavfs.kext/Contents/Resources/loadwebdav" has been modified and will not be repaired.
Permissions differ on "Library/QuickLook/iWork.qlgenerator/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.
Permissions repair complete
Can I upgrade to Snow Leopard without addressing the WARNING: items safely or do I need to seek professional help and clean up those issues before I upgrade? And what are those WARNING: lines trying to tell me anyway?
I truly appreciate any insight you may have to allow me to upgrade with confidence.

You can safely ignore those messages:
Permissions you can ignore on 10.5 and 10.6:
http://support.apple.com/kb/TS1448?viewlocale=en_US
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard changed the location of a number of system components.
Permissions repair complete
That's the punch-line! If it says that you are good to go!

Jabber voicemail address cert warning

Similar Messages

Maybe you are looking for