Jabber voicemail issue

When we click on the voicemail icon within Jabber, we get "You are not signed in to your voicemail account. Go to the phone accounts tab..."
When I go to File>Options>phone accounts and and enter my AD credentials for username and password, it says the username or password is not correct.
Am I entering the correct info for the username and password? Everything is sync'd with LDAP.
Thank you.

This may not be your case, but I had this same exact issue last week and it was because the Server Admin had changed the password to the account we used as the CN in our LDAP authentication. Once I updated the password in CUC, the problem was resolved. So, doesn't hurt to ensure the credentials are still good.

Similar Messages

  • Voicemail issue since i did upgrade

    voicemail issue since i did upgrade

    Hi there lisapetito,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Troubleshooting voicemail
    http://support.apple.com/kb/ts4430
    -Griff W. 

  • Cisco Jabber for Windows Voicemail issue

    At this I'm in processing of implementation Cisco Jabber UC solution for big Company.
    I use CUCM 9.1.2, Cisco IM and Presence 9.1.2, CUC 9.1.2, Cisco Jabber for Windows 9.6.1.
    I have issue in Cisco Jabber with VoiceMail Integration - when I leave voice message for any user,
    than this message is arrived only him Cisco IP Phone, but not in him Cisco Jabber.
    From Cisco Jabber Connectivity status in help menu I see that VoiceMail service is successfully connected
    and I see VoiceMail button in Cisco Jabber.
    How can I resolve this issue?

    Have you configured the UC Service profile on CUCM with both Voicemail server and mailbox servers?

  • Jabber 9.2 Voicemail issues

    Dear Team
    I am facing a stange problem with my jabber for windows clients, voicemail connection status always showing not connected. but all other services are working fine, including "call voicemail" button. i am also able to view and play voicemail thru http://unconnectionserver/inbox by using the same credentials
    I have checked firewalls ( put the jabber client to the same server vlan and tested) no issues found
    I am following the server setupguide from cisco website
    could somebody can explain where i will check the logs for not connecting voicemail ?
    Thanks in advance
    Rajesh

    Hi Rajesh,
    We had the same problem. Read the document over and over again but did not see the problem. Until I check the server in my Iphone jabber clients. This was the Exchange server.
    Hmmmm......
    I checked the mailstore profile and changed it to the Unity server.
    Now everything is working fine.
    Cm -> user management ->user settings -> UC Service
    create mailstore to Unity server Unitmailstore1 (If you have multiple server create more)
    Cm-> user management -> user settings ->
    In you servervice profile select the mailstore profile.
    http://unityserver.yourdomain/inbox shows a login page to view you voicemailbox on the unity server.

  • Visual Voicemail Issue

    I have been having a problem for at least almost 2 months with setting a new visual voicemail greeting. Everytime I go to the greeting part it says retrieving and it has been stuck in that part for a month. The latest update I got didn't do anything. I have T-Mobile as a carrier and they told me this was an issue on your guy's? Some info or help would be gladly appreciated. Thanks 

    Use one of the methods in this kbase article to reset your visual voicemail:
    http://www.wireless.att.com/support/knowledgeBase.do?content=KB81229.html

  • CUC Voicemail Issue

    Hi all
    Currently running CUC 10.x. User voicemail box was working fine. However, configured Unified Messaging and I can leave a voicemail for several users which illuminates the MWI on the phone and appears in email format. Problem is that I get prompted with the "Hello" greeting when pressing the messages button on the phone instead of the user voicemail box.
    Any takers?
    Thanks
    Simon

    Is this a new install? Has it ever worked?
    If your issue is simply that when you press the message button you get the hello greeting it means CUC does not recognise the extension number that is calling in so routes the call to the default hello greeting.
    If you use the RTMT tool and connect to CUC you can use port monitor to see what digits are being sent from CUCM. You may need to use a voicemail profile to manipulate the digits.
    Out of interest why are you using full E164 for your extension number!? If you want to call someone across your office you have to dial the full E164!?
    Hope that helps
    Matty

  • Email Voicemail issue

    whenever i try to open a voicemail (wav) file that i get through my work email as an attachment, the application loads and the voicemail name starts scrolling on the screen but the file never plays. It shows the length of the voicemail but when you press play nothing happens.

    In addition, while the described symptoms do not match identically, this KB has some information that might be helpful:
    KB15191 “Unknown error was encountered” when attempting to open or preview a voice mail message using Cisco Unity
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Jabber Video Issue on Mac

    I am running Jabber Video 4.6 (17194) and OS X 10.9.4.  When I installed the Jabber software, it would not recognize the built-in camera or my Tandburg HD Camera.  I have a meeting with a Client on Wednesday and this is the way that they are requesting that we communicate.  I need to figure out what is the issue.  
    I can get both cameras to work with Face Time.  I also have the following collboration tools loaded that do not have an issue with the cameras:
    Lync for Mac 2011 v14.0.9 (140606)
    Cisco Jabber v9.6.0 (173114)
    Assistance would be most welcome.
    Mike

    Hi Mike,
    It is a known issue. It is a Bug in version 4.6.
    You need to upgrade to version 4.7 or higher, just be aware that the user will be prompted to downgrade when signing in because Cisco is currently only provisioning version 4.6.3. The user should decline that :-)
    http://software.cisco.com/download/release.html?mdfid=283613653&softwareid=280886992&release=4.8.6.18185&relind=AVAILABLE&rellifecycle=&reltype=latest
    Thomas

  • Jabber login issue&uploading pic

    I am facing issue on logging jabber into iphone
    Status always shows verify
    what could be the problem can any body suggest me?
    How to set a photo in jabber client?

    I  was able to make this work, and it was a huge PITA.  You have to modify the XML files that Jabber uses for its configuration.  You then have to have a web server that holds all your images.  Jabber downloads them from the web server.

  • Voicemail Issue

    None of my voicemails are coming through since I did the update..and are taking almost 24 hours to finally show that I have a vm..
    HELP

        Voicemails are important, let's fix this pipig2004! Are you having data connectivity issues as well? Try resetting network settings here http://vz.to/19w1oOW power off/on test and share. Thank you.
    TominqueBo_VZW
    Please follow us on Twitter @VZWSupport

  • Jabber voicemail address cert warning

    Hello.
    I hope someone can help me with this.
    I have tried to change all setting to use FQDN and also adde certificates issued by our internal PKI.
    it works for CUCM and IM&P connections, but jabber still complains that on the certificate for VM.
    What I see under connection status is that Jabber is still trying to connect to the IP address of VM not the FQDN.
    I expect that is why i am getting the certificate warning. But how do I change this?
    I have changed the UC Service in CUCM to the FQDN but still the same.
    Anyone that can help me?
    -Alex

    Can you check under the uc service menu to look for the mailstore ( exchange) ; is this also corrected to the use the fqdn for unity connection server.
    If this is also corrected and you are still seeing that jabber attempts to connect to the ip address; please make sure that you try to delete the local cache from your windows PC; ( provided this is being tested on jabber for windows).
    here is the location that you look for to search for the cache folder;
    For Windows 7:
                    a) C:\Users\<user>\AppData\Local\Cisco\Unified Communications
                    b) C:\Users\<user>\AppData\Roaming\Cisco\Unified Communications'
    In order to remove the cache you will need to delete the jabber sub folder which is uder the unified communications folder ; and then try to re enter the log in credentials and server details in jabber and connect to check if now you see jabber for windows referencing the FQDN instead of the ip address.
    Please note that by deleting the cache folder on the PC where jabber is installed; you will loose all the recent im's that you typed or received. Also you will need to re enter the log in credentials to log in.

  • Voicemail issue recently,,, anyone else experience this??

    ok,,, so over the last week this is what i notice: when someone calls and leaves a VM, it takes up to 1 hr before the voicemail shows up on my phone!!!
    i can see the missed call time,,, and then an hr later , the VM will show up..
    i am wondering if this just an AT&T issue,,, but any help is appreciated!!

    chadds,
    Visual Voicemail is downloaded via EDGE. How long it takes to download the message can vary upon a lot of factors. Some of those factors include - phone usage (in many areas EDGE is disabled while speaking on the phone), other EDGE usage (downloading, web based IM client that is continously refreshing), the length of the message (will affect file size), speed of your EDGe connection. Speed can vary depending on congestion as well as signal strength.
    Hope this helps,
    Nathan C.

  • Voicemail issue with LG Envy 3

    I have 2 identical phones on my account; one has lost the voicemail capability while the other works fine. Nobody can leave me messages anymore, and when i call VM from the phone, it says the number i have entered is incorrect. Anyone have any ideas on what the problem could be?

    caebul wrote:
    I have 2 identical phones on my account; one has lost the voicemail capability while the other works fine. Nobody can leave me messages anymore, and when i call VM from the phone, it says the number i have entered is incorrect. Anyone have any ideas on what the problem could be?
    Thanks for posting.  In order to resolve your issue can you please PM me the mobile telephone number so I can research your account?  I can reset your VM configuration. Thanks.

  • Jabber Voicemail Incorrect Time Stamp

    I just noticed the the time stamp on my voicemails in Jabber v9.0.1 Build 12296 have the incorrect time stamp. They are all one hour behind. I confirmed that this does not happen in any of the following:
    Jabber v9.0.5
    CUPC v8.6
    Jabber for Mac v8.6.1
    Is this happening to anyone else?

    did you get this sorted out?  Im having the same problem with Jabber v9.1.5, CUC 9.1.2 and cucm 9.1.2.  Both cuc and cucm use the same NTP time source.  Time looks fine on the handsets and from the cli..

  • Voicemail issue since changing network (UK)

    Hi,
    I've recently changed networks from o2 to Three. I had my iPhone unlocked from o2 and started using my SIM 600 card that i purchased in a Three store.
    Initially i had no issue until i was left a voicemail. I soon realised that Three don't offer the visual voicemail facility, however this isn't the issue. On checking my voicemail and deleting it; i've now found that i constantly have the red dot icon (blank) over the voicemail tab on my "phone" app.
    I've checked my voicemails and have the reply fromt he voicemail stating "you have no new messages." There is no facility to check to see if there are saved messages so i can delete them, so i presume i have none. I receive the standard text message stating i have voicemail when i reboot the phone, even though i have no voicemail on checking! I've also found that when i check, my iPhone keeps checking for email and also for App updates when i have Email set to Manual (not pushed or fetched) and i certainly ain't hit the App Store!
    I've spoken to Three who said that there isn't an issue with the voicemail settings as its working however the technical customer advisor asked me to wait whilst he checked to see if there was anything else he could do to help me. On coming back he said that the tech department are investigating a potential issue to identify whether its a fault on the iPhone side or if its a fault on the Three side. My iPhone was working perfectly well with o2 and on removing the Three sim, and replacing it with another sim it worked perfectly well so i assume its Three's issue which is what i told him.
    I've tried a soft reset, i've tried a full restore - setting it up as a new phone or with a backup, still remains. I've tried calling and leaving a voicemail to see if i can flush the system, but nothing. My colleague at work is on Three with the same iPhone, same iOS update etc etc and she doesn't have the issue so I'm bemused.
    I read somewhere it could have something to do with the micro sim being an old and outdated sim - could this be the case?
    I'm looking for people's help as i'm heading to the Three store on Saturday to request a new micro sim so wanting some bullets to fire when i get there...
    If anyone can help, i'd be sincerely grateful!
    Cheers
    Paul

    Just as an update before i close the topic off...
    Went into the Three store today and explained the situation to the same guy who sorted the contract out for me. He said he'd never come across it before and couldn't understand why it was happening.
    I chanced my arm a little and although it was more or less the whole truth i'd bent the truth a little about the customer services number who didn't have a clue anyway and said that i'd done a bit digging on the internet and mentioned about the micro sim being outdated or something similar. He then offered to try it to sort the issue out, gave me a new micro sim and transferred my details over...got home and swapped the micro sims over.
    Voila, icon vanished and no issues thus far...on looking a little closer on the packaging that the micro sim comes with, the initial one i had was from Aug 2011, the newer one was from October 2011 so it may be possible that the post i'd found from googling the issue was correct.
    If the issue arises again i'll add to the topic, however so far so good - so i hope that others who may have this issue see this and try the above!
    Cheers

Maybe you are looking for