Jabra BT620s Bluetooth headset connects then dis connects

My BT620 Bluetooth headset pairs with my iPad but when I connect the iPad drops the connection after 5 or 10 seconds. The bt620s work great with my other Bluetooth devices and supports the ad2p stacks.
Any suggestions or ideas on how to get these to work?

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.

Similar Messages

Jabra bt620s stereo headset cuts out

Hi Everyone,
I am using the Jabra bt620s stereo headset and love it. BUT, when I am listening to music it cuts out for a few seconds. Has anyone else experienced this and/or know of any fix? It is always fully charged and close to the Blackberry. BTW - I am using the Sprint Blackberry Curve 8330.
Thanks in advance!

H I and welcome to the forums!
here is a list of the supported Bluetooth devices by Blackberry:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04009&sliceId=SAL_Pub...
Please let me know if you need more assistance!
Thanks,
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Ios 6.1.4 Phone calls not working from Jabra EasyGo bluetooth headset

I updated to 6.1.4 yesterday
I use Jabra EasyGo bluetooth headset.
Music streaming is fine with the headset.
Problem is it doesnt respond to any phone call or dial commands.
Tried it on another friends iPhone 5 with iOS 6.1.3 it works
Please help to solve as I depend on the bluetooth my work drives car a lot.
Tq

I don't think I can restore the back up from iCloud, because I did not back it up to iCloud before the update to OS 6.1.4. I don't think this is related to voice samples because it seems to cut in and out, like Siri is not 'hearing' me, due to a problem with the microphone.
Apple please help!

Wifi keeps connecting then un-connecting

randomly my wifi seems to not be working, it connects then un-connects and when I go to link it non of the hubs come up and it just loads. This happens and the wifi doesn't seem to work for long. What could be the problem and the fix?
Any huyy help will be greatly appreciated

I have done this numerous times however it still seems to be happening

IPhone Bluetooth Headset will occasionally not connect?

Sometimes I turn the bluetooth headset on and it makes the four rising tones indicating it is turning on, but the phone does not recognize it and it does not connect. It takes MULTIPLE tries to get it to connect sometimes. Other times it works flawlessly. Anyone have any insight on this?

Once you power it on, you hear the 4 rising tones... once you've heard that then you need to click the button once more and you will hear a single beep.
This beep will make the Headset icon show up on your iPhone. If you don't click the button after it powers on, it doesn't always connect immediatly.

Bluetooth Headset won't stay connected under 10.6

My PS3 headset use to stay connected under leopard but something in snow leopard doesnt like it. If I can get it connected it'll stay connected for a min. And i cant get the input meter to pickup any audio from the device. However on my iPhone and PS# it works flawlessly. I've tried re-parring it and making sure all my other bluetooth items are off but it still does the same. Any suggestions?

Ugh, NO ONE? This is absolutely stupid.

Anyone have luck using Jabra BT500 Bluetooth headset with iChat?

I have narrowed down my Bluetooth headset search to Jabra's BT500, and am curoius if any of you have successfuly used it with iChat.

Hi All,
I bought a Jabra BT500 today here in Hong Kong as I use Skype to connect to colleauges and family back in the UK.
The device connected perfectly to my Nokia phone (although volume is a bit low even at highest setting).
Then I tried to connect to my Powerbook G4 using the Bluetooth set up.
All went okay until it asked for a passcode which the documentation in the Jabra box said was "0000" - at this point the set up programme rejected the device.
I then tried "other devices" from the set up menu - this did not require a passcode but still rejected the device.
Next stop Google and the Apple pages here.
Seems the problem is not uncommon and there are upteen people with the same problem.
But on reading the solution here of connecting by using iChat preference - I thought I would give it a go.
Same Bluetooth set up came up in iChat Preferences but hey presto! - this time it accepted the pass code and I am good to go.
Quick change of sound output setting in System Prerferences and I can even listed to iTunes (although only in one ear!) I can even use it in the "Voice Notes" feature of Microsoft Word.
So thanks for the solution - the frustration of the past 3 hours was getting me mad!
Cheers Norman

Connecting Jabra BT620 Bluetooth to N97

Could anyone advise how to connect a BT620 Headset to my N97 via bluetooth. My phone recognizes two mobiles in the vicinity but although the headset is ready for pairing, the N97 can not find it.
Could anyone help a Newbie please.
Many thanks

Using a headset needs several steps even needed if you have the latest computer or Mac OS X release. Please make sure to follow them in order.
Download the Apple Bluetooth Firmware Updater
Install it
Launch it from Applications > Utilities > Bluetooth Updater
Apply it to your adapter (takes very long).
Start the Apple Bluetooth Assistant and select Headset. Do not use anything else!
Make your headset Bluetooth visible. Look up the manual of your headset how to do that.
Now select the headset in System Preferences > Sound.
In most cases step 3 is missed. You have to start the already installed updater yourself (do not ask me why). Step 4 fails if your Bluetooth USB adapter is not supported by Apple and you have to go for a D-Link DBT-120 USB adapter.

Jabra BT110 Bluetooth headset problems

I have a Jabra BT110 headset that I had trouble connecting at first, and then the moon and stars lined up, and I was able to get sound out of it.
Now I can connect the headset, and I can play a couple of sounds, then when the sound stops, the headset goes "bloink" like it's being disconnected, and sound no longer plays back through the headset. If I re-pair the device, it works again for a short time (the amount of time it takes to play a few sounds), then once the sound stops, "bloink", it disconnects, and won't reconnect until I re-pair the device. Yes, batteries are fresh.
Anyone have experience with this device on their MBPs? Any ideas how to make it work righ?
This same headset works fine with a ThinkPad with built-in BT and with a D-Link DBT-120 connected to various WinXP boxes. No, I haven't tried the DBT-120 with the MBP, nor do I plan to, since the MBP has Bluetooth built-in.
PS: shame on Apple for not offering MBP with a built-in modem, built-in s-video out, and built-in microphone jack.
MacBook Pro 1.8 1GB Mac OS X (10.4.6)
MacBook Pro 1.8 1GB Mac OS X (10.4.6)

Seems no one responded to your msg. I started experiencing this on my Plantronics 950 BT headset as well. It was working fine up until a couple weeks ago, where if I get disconnected, it wouldn't repair again automatically. I have to unpair and then it would work again. Same story with yours. Did you ever find a solution?

Bluetooth Headset Connection Problems

I'm on a G5. In both Tiger and in Leopard, my plantronics 510 D won't work with my G5. With my powerbook G4, it works fine. The new excuse the G5 gives me after Leopard is that "no configurable services found on your device"
I would sure like to use my skype with my plantronics. Any suggestions? I'm using a D-link usb add-on, and I've already updated firmware.

Sounds like my problem too. Running Tiger (fully updated it). I succedded in registering my Plantronics Voyager 520 Bluetooth headset. Then, as a result of some static. I deleted it intending to reinstall. Since then it's no longer discoverable. I believe I saw something on Bluetooth delete problems, but I can't find any information

Jabra Halo stereo bluetooth headset skipping with IPAD...

Hi, does anybody here have ever used a Jabra Halo Bluetooth Headset with an IPAD or Iphone? I just recently bought this device and paired with my IPAD and iphone 3gs, and I'm very disappointed, sound quality is great, but the audio keeps skipping every once in awhile, very annoying especially if watching a video or listing to podcasts, perhaps there's a setting that I have missed? any advise would be very helpful, My firmware by the way is ios 4.2 thanks...

To be clear this is NOT an issue with Stereo Bluetooth headsets, it is a problem with the chipset in Apple's iPhone and iPad.
Prior to the iPhone 3 I had a T-Mobile Dash with stereo bluetooth and it worked beautifully. When I got the iPhone 3 the bluetooth was a disaster with skipping and dropping the connection.
I eventually went over to a Sprint EVO and the stereo bluetooth paired with my $300 Nokia noise canceling headphones was awe inspiring. I purchased an iPhone 4 and it arrived yesterday. Today I listened to those same headphones and got skipping and it even unpaired for no reason at all.
The issue with the iPhone 4 seems to be that when the screen is active there is no problem. However, when you lock the screen it starts skipping.
So, I just wanted to point out that stereo bluetooth has been broken on the iPhone for at least two generations and apparently on the iPad too which is extremely disappointing. It's not the headset mfg, its Apple.

Rocketfish bluetooth keyboard can't auto connect after snow leopard upgrade

Hi,
I have one of the newer model 2GHz Mac Mini's which I bought back in March. I've been using a Rocketfish model RF-ABTKB bluetooth keyboard (which I had been previously using on a windows system before getting the mac). Up to now, the keyboard had worked fine. Whenever I booted the mac, I'd use my bluetooth mouse to go to the bluetooth menu, scroll down to "Rocketfish Bluetooth Keyboard", and then select "connect" out of the sub menu, then would click the "connect" button on the underside of my keyboard and it would connect, every time.
I bought Snow Leopard on Friday & upgraded my machine. Since the upgrade, I no longer see the "connect" option for the keyboard in the bluetooth menu. The only option I see now in that sub-menu for the keyboard is "Open Keyboard Preferences...". If I go to the preferences window, click "set up bluetooth keyboard" at the bottom of the window and go through the pairing process again (going through the discovery process, entering the PIN that the mac generates, etc) it pairs and works fine (I'm actually using it to type this post). If I look at the keyboard sub-menu in the bluetooth menu after it's paired/connected, the "Disconnect" option is now available. The disconnect option itself is no surprise, it had been there in the past, but I thought it's odd that I can still see the disconnect option but not the connect option.
When I disconnect the keyboard (by either selecting that Disconnect option or by just not using it for 5 minutes & letting it go to sleep) the keyboard disconnects, the "shadow icon" fades on to the screen showing the keyboard is no longer connected, and I can go back to the bluetooth menu & still not see the same Connect option that used to be there before the upgrade.
My generic bluetooth mouse (doesn't have a brand name) continues to work with no issues. I called the support number for Rocketfish (which is really just a consumer electronics sub-brand of Best Buy), they said that their keyboard is fully compliant with Mac OS X and if the connect option is no longer showing up for the keyboard in the bluetooth menu, Apple must have done something that changed the way the mac is handling bluetooth.
Also, I did try removing the keyboard from the Bluetooth control panel in System Preferences and re-adding it from scratch, no change.
Anybody have any ideas???

Hello N:
I suspect that there has been some sort of incompatibility introduced. However, since this is an Apple forum, I recommend that you pursue the problem with "rocketfish." If is suggested troubleshooting steps, I might confuse the issue further as I would be focussed on Apple devices.
FWIW, no such problem has surfaced with Apple keyboards or mice. I am not trying to sell you one, I do not work for Apple.
Barry

Jabra BT620s not pairing

I've had a Jabra 620s bluetooth headset for a few years now and had no problems with my old iPhone 3. Since getting the 4s it will not connect. Initially it appears to pair but when trying to playt back music it shows "Not connected". I've re-paired the two several times but am still unable to get playback.
Not sure if this is a 4s issue or IOS 5.0.1 issue.
Anybody able to help??

I have tried pairing the BT620s to my iPhone 4S lots of times. The phone consistently drops the pairing. When it does VERY ocassionally maintain some sort of pairing, I can control Siri and the previous track/rewind feature but the music does not come out from the headphones as the phone dosen't see them but will come out from any other bluetooth device I have. Weird.
In the 30 or so times I have just tried pairing them, it has worked twice but when I turn the headphones off then back on again, the pairing refuses to connect and no sound comes from the Jabra speakers.
I'll take the phone and headphones to an Apple store and see if they can do any better although I'd venture to suggest they will say it's the headphones that are at fault. Hopefully they will try pairing them with another iPhone 4S to test it. At the moment though - still no joy - but works everytime with iPhone 3G

Audio does not behave correctly when Bluetooth headset disconnects

When a Bluetooth audio receiver disconnects, Windows reverts to another active audio connection. However, the programs that were previously using the Bluetooth connection do not transfer to the new audio connection and reactivating the Bluetooth connection
does not get the audio from those programs back.
The only way to make them work again is to close the program and reopen it. As a gamer - this is particularly a problem when batteries die. Usually I would just swap the batteries in 10 seconds and turn the headphones back on, however it is not
possible due to this issue. Exiting the game would ruin my team's experience as 5+ minutes is approximately 10% of the game's average total time.

Hi,
There are 3 reasons I can think out:
1. Bluetooth driver was not released when it is disconnected suddenly, this can be caused by Bluetooth software.
2. Audio driver can be corrupted.
3. There is the problem on the program itself.
I recommend you do following test:
Open Windows media player to play music with Bluetooth headset, and then disconnect Bluetooth headset and see if the headphones can work fine with media player.
If it works fine, the issue is on the program you run with problem. Contacting the program provider would be more helpful.
Otherwise, it's related to Bluetooth driver or software, please try to update them from manufacturer's website to see what's going on.
Also, please check if there is any event related to this issue in Event viewer.
Kate Li
TechNet Community Support

6682 and bluetooth headset with no sound - Here's ...

Hello,
I had an 'no sound' issue with a 6682 and a Jabra BT250 bluetooth headset. I've had the phone for 2 months and used the BT250 with it every day.
My problem started when I connected a POP connector and wired headset (not the standard Nokia version). From that point forward, when I connect my bluetooth headset all of the correct icons appear on the phone showing the BT headset is connected and the bluetooth connection is functioning, but the sound does not come out of the headset. It comes out of the handset (like a normal call) instead.
I searched through the forum and found this procedure listed for the N70 and other headsets.
- Take out the battery
- Take out your sim
- Leave it for at least 2 hours
- Put another SIM into it
I'm adding these steps
- Turn on the phone
- If prompted, enter the correct time and date
- Pair the headset with the phone
- The headset should now work correctly
- Power down the phone and replace the borrowed SIM card with your own.
- Pair the headset with the phone.
- The bluetooth headset should now work correctly.
This procedure correected my problem. A thorough cleaning of the connector contacts did not help.
I hope this helps someone else.

Did you ever figure out how to use the headset? I am having the same problem

Jabra BT620s Bluetooth headset connects then dis connects

Similar Messages

Maybe you are looking for