JAEHYLEE (R12 IBY) Format Batch Error

Symptoms-
On 12.0.2 in Production:
payment batch the Format Payment Instruction Program 수행시 다음과 같은 에러 발생
ERROR
IBY_FD_PAYMENT_FORMAT module: Format Payment Instructions
SQLException occurred: ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "APPS.IBY_FD_EXTRACT_GEN_PVT", line 375
ORA-06512: at "APPS.IBY_FD_EXTRACT_GEN_PVT", line 205
ORA-06512: at "APPS.IBY_FD_EXTRACT_GEN_PVT", line 101
ORA-06512: at "APPS.IBY_EXTRACTGEN_PVT", line 76
ORA-06512: at line 1
Cause
Bug 6388935:Format payment instruction program error WITH ORA-01422"
Solution
To implement the solution, please execute the following steps:
기존의 Payment Instruction은 cancel처리후 one-off Patch 6500756 를 적용하여야 합니다. R12.0.2에서만 적용가능
Reference
464778.1

Hi,
Please see if (Note: 564536.1 - Release 12 : ADSTRTAL.sh returns error : TIMED OUT( 100000 ): INTERRUPTED EXCEPTION) helps.
Regards,
Hussein

Similar Messages

EBS R12 date format display error?

Hi all,
I am opening forms in EBS R12 but all the dates value displayed are DD-MM-RRRR instead
of the format like 21-04-2008, how do I resolve this please?
Thanks a lot

Hi all,
I am opening forms in EBS R12 but all the dates value
displayed are DD-MM-RRRR instead
of the format like 21-04-2008, how do I resolve this
please?
Thanks a lotWhat is the difference? if you need it in a different format, can you apply a format mask?
Thanks,
Chiru

Patch version is R12.IBY.B.2 i need to apply this Patch 11712930:R12.IBY.B

Hi All,
I have to apply the patch Patch 11712930:R12.IBY.B where i have the version of IBY patchset level R12.IBY.B.2.
Do we need to apply the patch or is it consolidated with R12.IBY.B.2
Following this document for the issue *(Performance: Create Settlement Batches Program Running For Several Hours [ID 1250464.1])*
Regards

Hi;
Please see
How to check if certain Oracle Applications product/module is implemented? [ID 443699.1]
How to check which Techstack patchsets have been applied [ID 390864.1]
How to check if a certain Patch was applied to Oracle Applications instance? [ID 443761.1]
Regard
Helios

New LUN Takes A long Time To Format and Errors Out

Good afternoon,<o:p></o:p>
I have a Hyper-V Cluster composed of 4 nodes and these nodes are able to access multiple CSVs (14 in total). I recently requested a new LUN (LUN 15)to be provisioned
to my Hyper-V cluster in the size of 500GB. Here is my problem:<o:p></o:p>
1. Formatting of a 500GB LUN (with quick format selected) should not take more than a few seconds. Instead, the quick format takes about 2hrs if not longer. I have actually
seen it go for half the day.<o:p></o:p>
2. Once the formatting has completed (no errors), taking the formatted LUN offline freezes the Computer Management screen and shows the status (Not Responding). This
will take place for 30 minutes or less and show that the LUN has been taken offline.<o:p></o:p>
3. In the Failover Cluster Manager, detecting the disks takes about 15 minutes. Once the available LUNs have been detected I can add the 500GB LUN to the Disks screen
without any problems.<o:p></o:p>
4. While in the Disks screen, adding the LUN to the Clustered Shared Volumes takes about 5 minutes (too long).<o:p></o:p>
Already seeing that there is a problem, I went ahead and used the Hyper-V Manager to create a 200GB vhd on the new LUN which has been added to the CSV. The bar indicating
the progress of the vhd creation does not display any progress (no green progress bar appears, not even a tiny bit of it) and after 3 hours (more or less) I receive an error, stating that the creation of the vhd failed.
<o:p>NOTE: The vhd shows up in Volume 9 (LUN 15) but I can only bet that it will not work, plus I would not want to work with a vhd file which failed during the
creation process.</o:p>
<o:p>Long story short, I repeated the above steps to see if that was a temporary problem, but it is not. The same problem occurs no matter which Hyper-V cluster
node the operations are performed on. I would like to add, that I tested the creation of a vhd on an already configured LUN and the creation was completed successfully, and within a n expected time frame.</o:p>
NOTE: When LUN 15 errors out, it's status shows "Failed" in the Failover Cluster Manager. This in turn, causes the re-scanning of available disks to take forever (in Computer Management) and it keeps searching. Pretty
much, the fail of one LUN affects the entire functionality of the entire Hyper-V Cluster.
Errors Listed In Event Details For LUN 15:
1. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer accessible from this cluster node because of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and
network connectivity.
Event ID: 5142; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
2. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer available on this node because of 'STATUS_IO_TIMEOUT(c00000b5)'. All I/O will temporarily be queued until a path to the volume is reestablished.
Event ID: 5120; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
3.Cluster resource 'Cluster Disk 5' of type 'Physical Disk' in clustered role '4530acc9-8552-4696-b6c3-636ff8d58c46' failed.
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover
Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet.
Event ID: 1069; Source: Microsoft-Windows Failover Clustering;Task Category: Resource Control Manager
4.
Cluster resource 'Cluster Disk 5' (resource type 'Physical Disk', DLL 'clusres.dll') did not respond to a request in a timely fashion. Cluster health detection will attempt to automatically recover by terminating the Resource Hosting Subsystem (RHS)
process running this resource. This may affect other resources hosted in the same RHS process. The resources will then be restarted.
The suspect resource 'Cluster Disk 5' will be marked to run in an isolated RHS process to avoid impacting multiple resources in the event that this resource failure occurs again. Please ensure services, applications, or underlying infrastructure
(such as storage or networking) associated with the suspect resource is functioning properly.
Event ID: 1230; Source: Microsoft-Windows FailoverClustering;Task Category: Resource Control Manager
Any and all help will be appreciated!

Hi AquilaXXIII,
What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
update first,
Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
Understanding Cluster Validation Tests: Storage
http://technet.microsoft.com/en-us/library/cc771259.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Date format convert error in XML interface based Adobe interactive forms

Hi experts,
I am using XML interface based Adobe interactive form in Web Dynpro ABAP. The form just contains some date fields and numeric fields.
When I test the WD Application, the date fields appear like 0000-00-00 at the first time. And then I set the form input disable, and get the XML from the form, at the same time I get the warning message, 'date format convert error'. By the way, I have set the edit pattern, display pattern and data pattern of the date field to YYYYMMDD, but there seems no effect.
Could you tell me how to set the default date format in date field Or clear the 0000-00-00?
And another question, all of the numeric fields in the form appear like 0.0, how can I set it to empty when the form initialize?
Best Regards,
Guo Guo Qing

Hi Chintan,
Thank you for your reply.
I have tried every possible changes on the Date field, locale, pattern. But still no effect. When the PDF come up in the WDA program, the date field is still '0000-00-00', and then I export the XML date of the form, there is also '0000-00-00' in the interface field.
I can't clear the '0000-00-00' in initializiation event using javascript because if I need to open the form again, if I do this, the value user input could be cleared.
I also try using Javascrip like this
if this.rawValue == "0000-00-00"
{ this.rawValue = ""; }
The code above can't clear the initializiation zeros too.
Have you used the XML interface based online Adobe Forms? I have used XML PDF forms for output before, that's perfect. But the input forms seems so strange.
Best Regards,
Guo Guo Qing

SCOT error "File format conversion error"

Dear All,
When a PDF file is sent as a FAX, the SCOT throws the following error with message XS 812:
No delivery to <fax_number>
Message no. XS812
Diagnosis
The message could not be delivered to recipient <fax_number>. The node gave the following reason (in the language of the node):
File format conversion error
Can anybody suggest what could be the problem?
Note that the normal PCL and RAW data are being sent to the same FAX number without any problem.
Thanks
Sagar

Hello,
You need to specify the correct formats:
Check this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/f8ef3aabdfb20de10000000a11402f/frameset.htm
Regards,
Siddhesh

I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

I forgot the code for my iPhone to access the Home screen I do , please help me
try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

Hello polo-angulo,
I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Get help with iOS update and restore errors - Apple Support
Sincerely,
- Brenden

Invalid field format (screen error) on Table Control

Hello,
When selecting a line or multiple lines on a screen made by me(using a Table Control), I get Invalid field format (screen error). Debugging the code it sends the message when looping the internal table on PAI to check if there were values changed. Is there a reason why this error appears on this?
loop at it_values.
    chain.
      field pvalues-BEGDA.
      module CHANGE_QUEUE.
    endchain.
endloop.
Thanks.

No need to loop to check whether data is changed after PBO, just check System Field SY-DATAR, it will be set to 'X' if any field was changed.
So the following code is enough;
IF SY-DATAR EQ 'X'.
   PERFORM SAVE_DATA.
ENDIF.
Regards
Karthik D

Error in module program - Invalid field format( screen error )

In the module program i have added 1 input field named gv_pallet of 1 character. while processing the transaction when i put value 1 in this input field and press a button i am getting error ' Invalid field format( screen error ) .
I am not geting any clue whats the eror . can anyone able to tell me the error.
Point will be guranted .
Regards

No need to loop to check whether data is changed after PBO, just check System Field SY-DATAR, it will be set to 'X' if any field was changed.
So the following code is enough;
IF SY-DATAR EQ 'X'.
PERFORM SAVE_DATA.
ENDIF.
Regards
Karthik D

Error Invalid field format (screen error) in module pool

Hi
experts i am doing module in whichi had many check boxes on screen and each check box has function code means i want to do some thing else . but as i click the first or any other check box i get a error message
INVALID FIELD FORMAT (SCREEN ERROR).
Can anyody help me with this asnwers will be rewarded points .
regards

Dear Farukh,
can you please let me know how have you declared you check boxes.
how did you handle the click or the function codes in the user command module in your PAI.
The declaration of your fucntion codes can be done when you create your screen fields and then they need to be handled in the user command module i.e what you want to do when suppose you click on that particular check box.
Thanks
venugopal

Invalid field format (screen error)

We are using custom module pool report for displaying information. Information display in Table control which has also Radio button option for the further processing. After unicode conversion we are getting error while accessing the screen as "Invalid field format (screen error)" when user select Radio button. In production environment we are not facing any issue, but in Dev + Qas we have this issue. Nothing is changed as all environment are sync. To solve the issue we re-defined the Radion screen element, but no success we are still getting same error. I am not sure whether it is related to Page Format or something else. Could you please let me know whether anybody faced this issue ? For the information, I already searched on SDN and SNote, but there is no post or SNote

Have you checked if there are overlapping fields on the screen.
I've seen simular errors and usually it was beacuse of some change by SAP that made it so that the defined length of the screen field was suddenly to small.
I'm not saying that this is the case in your situation, but it never hurts to try and change the length of your screen field and see if that resolves the issue.
Arthur

Format Failed error when trying to format a WD MyBook 1TB external

I have tried twice to format the drive with the same "Format Failed" error message. I know it was still formatting with 28 minutes remaining (of the 7 hour format job) the first time - the second time it ran over night. Both times, I formatted with Mac OS Extended (journaled), and selected to zero out the data.
The only difference between the two attempts was a message reporting the Mac lost connection with the drive (after the first attempt) - didn't see any such message this morning after the second attempt.
I set a couple partitions, and ran "Disk Verify".
"DIsk Verify" lists the things it has checked, and gives the following messages:
The volume Startup Backup appears to be OK.
The volume Time Machine appears to be OK.
Other than the "Format Failed" error message, the disk appears to be ok. The "Startup Backup" volume is 319.87 GB as I set, and the "Time Machine" volume is 611.64 GB
I am able to copy a file to both volumes.
So, is the "Format Failed" error message real, and the "Disk Verify" fails to see a problem because it is checking things like the Catalog file, and not each spot on the drive?
Are there any disk utilities that can test the whole drive?

As I can see from the information posted, you are trying to
use URL-based portlet's SSO feature, though not in a correct
way.
The SSO feature of URL-based portlets relie on the usage
of Cookies as authentication tokens. For example, in the
present context, http://hostname:port/j2ee/examples/jsp/c.jsp
will write a cookie to the client upon successfull authentication.
Subsequent access to the same JSP or some other JSP in the same
workspace should be checking for the existence of this particular
cookie at the client side and if found should not prompt for
user information again.
If you can fine tune your existing applications as per above
conditions, then everything should work fine. Else you might
want to use page parameters to pass user information.
For more information on page parameters, please visit
http://portalstudio.oracle.com/servlet/page?_pageid=350&_dad=ops&_schema=OPSTUDIO&12678_PDKHOME902_39847486.p_subid=249821&12678_PDKHOME902_39847486.p_sub_siteid=73&12678_PDKHOME902_39847486.p_edit=0#NEW1

Common batch errors

Hello all,
I have been monitoring batch process chains for just over 2 months now and there seems to be a new error associated with a full and/or delta load etc everyday.
Does anybody have a tutorial/file etc on common batch errors and how to solve them.
Thank you and kind regards,
Keith

Hello Keith,
check out these:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
Hope it helps..
thanks,

Getting "... file has and invalid format. (Error no. 11)" when importing .tdms file into DIAdem 11

I developed a script for processing .tdms files in DIAdem 11.1, now I'm deploying the script on the very PXI system that created the .tdms files. This system had DIAdem 11.0, but when I try to open (DataFileLoadSel) the tdms file in my script I get the error message:
"D:\MyFileName.tdms" has an invalid fiel format. (Error no. 11)
The tdms files are created by a LabView application.
If I delete the correspondin .tdms index file, I get a little further, it loads the first two of four groups, using DataFileLoadSel on the first group, and DataFileLoadRed on the 2nd group, on third group, another DataFileLoadRed, I get the following error:
Error in <MyScript> (Line: x, Column: y):
Cannot load the file "D:\MyFileName.tdms" with the loader "TDMS"
Further information:
Cannot open the file "D:\MyFileName.tdms".
Is there a difference between DIAdem 11.0 and 11.1 that affects the import of .tdms files, if so, can I get around it?
Thanks,
Eric
Solved!
Go to Solution.

Hello eberg,
Before we go into more detailed error trapping, could you please try to install the TDMS 2.0 format on the DIAdem 11.0 computer (DIAdem 11.1 and LabVIEW 2009 come with the TDMS 2.0 stuff already installed).
Please get the download here: http://zone.ni.com/devzone/cda/tut/p/id/9995
Once installed, please try running the Scripts again (in DIAdem 11.0) and let us know if that fixed the issue. It might not help to install this, but it's a quick thing to try before we dig deeper into the issue.
Best regards,
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Pdf arabic text file unable to convert to word formate text error is coming.

Dear Sir,
Pdf arabic text file unable to convert to word formate text error is coming. The arabic text once converted to word language error is appearing.

Hi,
I am moving your posting at PDF Pack(CreatePDF) forum to Acrobat forum.
Hisami

JAEHYLEE (R12 IBY) Format Batch Error

Similar Messages

Maybe you are looking for