Jagged images after export to .mov format

Hi everyone reading,
In a project I'm working on in FlashCS3 Pro, I have a problem
with export > Quicktime film > ect.
When the encoding to the .mov format is finished and I play
my new created movie in QuickTime
a lot of images are jagged, not complete or the previous
frame remains in the vieuw.
How can I get a real clean and proper encoding from a .fla to
QuickTime H.264 or QT Animation?

Welcome to the discussions, evorot69.
If your original file is an MPEG file, you'll need to use MPEG Streamclip in order to convert it to an iPhone format WITH the audio.
http://www.squared5.com/svideo/mpeg-streamclip-win.html

Similar Messages

I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

So, I downloaded a slideshow templates and I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

What settings are you using to export the video with? I think 29.97fps is the only one that works with LR 5:
http://lightroom-blog.com/2013/09/17/timelapse-again-in-lightroom-5-2/
http://lrbplugins.com/shop/presets/lrb-timelapse-presetstemplates/

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

You can't. You can't export part of a sequence. Duplicate it and remove the bits you don't want to export from the duplicate.

PIXELATED IMAGES AFTER EXPORT TO IDVD

Help! I'm confused and frustrated. I have imported 65 images from iPhoto to iMovie and added titles, music and a few transitions. The movie plays fine in iMovie full screen on my 20 inch iMac. After exporting to Idvd project a number of the images (most) are pixelated and even more confusing (at least to me), when I return to the original iMovie (which was great before the export) now those images are pixelated also. WHAT IS GOING ON? , how can I avoid this? Hope I am in the right forum.
imac g5 Mac OS X (10.3.9)

Bengt: Right now I'm jubilant. Tried your methodology, and results were beautiful. Good burn and no JAGGIES. Then made a disc image and tried a burn from that. Great. If this continues I owe you a "GREAT BIG THANK YOU!!" I have been struggling with this problem far to long. Next I want to try adding some more complex transitions and perhaps some Ken Burns and hoping to see the same SMOOTHE lines. Too bad more people don't know about this for I see others posting about pixelation.
For now, I remain grateful.
imac g5 Mac OS X (10.3.9)

Problem with image after exporting from Lightroom 5

Good day. Please can someone help me? I have Lightroom 5, and I have a problem in exporting edited images. At issue, do all the necessary settings and retreat noise and sharpness adjustment by brush adjustment tool, however, to export the image, noise and some minor adjustments are lost. Because in Lightroom visualize the way you wish, but after export, is not it the same? How do I get a different result? Thank you all!

I have the same problem!
Something got broken with my Lightroom 5.6 (Windows 7Pro) two days ago and I don't see any adjustments made with brush after exporting photos!
It's not a problem of library or RAW files - the same, work fine on other computers (iMac).
I tried to clean the computer with CC Cleaner Tool, and install everything again, but it didn't help.
I already lost 2 days trying to fix it, and I don't want to format the drive and install Windows again
Can anyone help?

Poor audio quality after exporting to .MOV.

Voiceover in my video sounds crystal clear in the timeline but then thin and "rattley" after export when playing back with Quicktime player. Background music on other tracks always seems to be unaffected. Audio export set to AAC, 48 kHZ, Stereo. I must export to a Quicktime .mov format because it's the only file type that I can upload to YouTube without the color quality being distorted after upload. Adobe Updater says all of my programs are updated.
Any help would be greatly appreciated. Thanks!

How did you record the VO? is it a mono or stereo track, how are you viewing the export. Sometimes when just one section of the audio is wrong it is due to audio phase problems, I have not seen this with a vo before but it might be the issue. See:
Re: 1 of 2 audio tracks missing on certain browsers (h.264)

AIR - no images after export release built

Hi,
when I am running my AIR project in Flex Bulider I have images in my application. After export release built there is no images in my application. How can I fix this?

Yeah I had the same problem. Here is a hack:
If not, then you can kind of cheat. When you publish your .air file, it
will offer you the choice of files to include in the archive.
If you click "back" at this point then you have the opportunity (outside
of flexbuilder) to copy any files you need to the "bin-release" folder
that gets temporarily created as part of the publishing operation. Back
in flexbuilder, click "next" again and you'll be back in the stage where
you can specify files to include, but now you'll have the opportunity to
select the files you just copied to bin-release.
This, however, gets old pretty quickly!
ref- http://old.nabble.com/How-do-I-include-a-file-in-the-AIR-app-storage-directory-at-install- time--td21007763.html
Although, I recommend to bundle all assets up with Apache Ant, but that requires some time to configure a file to do that if you are not familiar with Ant.
And here is another link I have bookmarked:
http://forums.adobe.com/message/2294086

After exporting finished movie project, one clip is gone but all others are visabel

I hope someone can help me out. After importaing my movie project from iMovie into FCPX I made some changes to the project and was able to exported it. After exporting, all clips we visable with the expection of one. How can I fix this? The original event is in my list so I have no clue what is going on.

File>Relink Event Files.

Change in report format after exporting from pdf format to excel format.

Hi,
I got a problem while exporting the pdf format of the Report to Excel format "Fully-Foramtted Grids and Texts".
The format gets automatically changed.
Is there any solution to this problem.

Can you give some more details?
Which version are you using (and which patch level - if any).
Also what formatting is default on the reports and what is the default format in excel.
What exactly is different between PDF and excel?
Another possibility is that font substitution is going on??

Update image after export and overwrite

I am on XP64, but I expect this may apply to vista too. LR 2.3
1) I save my adjusted raw file as a dng to the same folder as the original raw using the export function under the file menu.
2) I decide to do some more adjustment and export again using the same file name. I select overwright to update the existing dng with my new adjustments (I only want one dng file).
3) On inspection I find that the dng file is not updated. I have to sync the folder to get the new settings applied to the dng. Would be nice to have this done automatically.

Patric,
Thank you for the advice. I did a sample on a separate sequence: same settings but field dominance none. I exported into 3 formats: appleprores 422, H.264, and MPEG-4. The quality is not much different. It still appears interlaced on the output.
I ended up applying the "de-interlace" filter on a few clips inside my first sequence with Upper (odd) field dom., and exported it and it looks good, except it does not play smoothly but that might the issue with my hard drive or fire wire connection as I have the export on ext. disc.
I must learn more about field dominance and why my camera records in Upper odd. I thought that there should be an output codec that would accommodate that field so I would not have to convert to progressive at all. Do you agree?
Thank you for any suggestions,
Izabela

No sound after exporting to .mov

When I export to a .mov using QT the sound from my project is gone. I tried to exporting to movie and get sound on a .m4v file but would prefer a .mov Any suggestions?

I think the iPhone can only record in mono..... I haven't found a way to capture stereo yet.

Damages sound of my movies after exporting, whatever the format ? any idea ?

Hello guys, every project I export (whatever the final destination : quick time, mac, Ipad, etc) comes out with a movie with a damaged sound for the whole movie. Basically, I use unprotected music from AAC or MP3 files, perfectly red in the orginal project. I checked the sound issues for every part (the green tip) and they are always valid. For information, video is great in the meantime.
As I'm a new on FCPX, maybe I missed a parameter or ....
Can you help ?
Thanx

Works perfectly, thanks.
I realize the "Imovie look like design" isn't really appropriate as lots of media (pictures, sounds) should be converted specifically for FCPX.....

Pixelated Images after exporting

I have recently switched from a Mac Laptop to a PC desktop. After I export my images they are really pixelated. I am not sure if lightroom is different for a PC. Can someone please help me.
I have the same settings picked too.

>switched from a Mac Laptop to a PC desktop
That should teach you not to do that ;-)
Sorry bad joke. The PC version behaves exactly like the Mac version so the same settings should give you identical files. Your screenshot doesn't show the crucial setting -> quality. It should be 80 or higher in general. Around 60 or so you'll start seeing blocky jpeg artefacts that might look like pixelation.

Editing RAW images after export to JPEG

Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help

grjacek wrote:
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
Yes
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help
We're going to need a lot more details aobut exactly (EXACTLY) the steps you follow after you do the export, because normally I would say this is one of the easiest things possible in Lightroom. Are any files moved or renamed or disks unplugged in between the time of export and the time when you try to edit again?

Jumpy video after Exporting Quicktime Movie from PS CS4 Extended

I am trying to produce a short training video for work. I created my entire movie in iMovie '09, and decided that it desperately needed some arrows and text to clarify some of the more technical aspects. I exported it as a Quicktime file from iMovie and imported into Ps CS4 extended.
After I finished the editing, I chose to export my video, again as a Quicktime movie.
The export completed, and when I went to review my movie, it was extremely jumpy. Watching the time line on the bottom of the Quicktime screen, I noticed that it was jumping in multiple second intervals. The audio portion seemed normal, but the video kept freezing and scrambling.
I attempted re-exporting the video with the Quicktime settings of Animation, and Frames Per Second set at current.
No difference.
Any ideas what I am doing wrong????

Marian -
Thank you for your response. I am only an amateur video editor, and up until now, I hadn't bumped up against the limitations of iMovie too often. You are definitely correct, it would FAR easier to do these effects in FCE, FCPro, AE, Premiere, etc., except for one thing . . . I don't own any of those programs! (I've already ordered a copy of Final Cut Express, but it stinks to have to spend $200 to get $7 worth of personal functionality.)
I do, however, own the extended Ps CS4. And, to paraphrase the guy on Lynda.com, "You already have it, and you know how to use it . . . It should work for you . . ."
This is the information on the file, it was exported this way automatically by iMovie (They don't give you much control over these functions.)
Unfortunately, I trashed my output from PS as well as the .psd in a fit of rage! It wouldn't take me more than 30 minutes to recreate it . . .
Would it be worth attempting to export it using H.264 instead of the animation Codec?
Message was edited by: dmisita

Jagged images after export to .mov format

Similar Messages

Maybe you are looking for