JAM Integration with ByD
Hi Everyone
I am trying to Create an Integration between JAM & ByD by following Blog Enabling SAP JAM integration with Cloud for Customer .
For some reasons I am not able to go Pass step 2 which is "OAuth Clients" as I can't see it on my screen. I am using IE 11. I have attached the Image here.
Please any Suggestions.
Kind Regards
Asad
Hi Guys
Yes Christian Happel I have created my Account on a free edition I got link on web. we haven't bought the JAM from SAP yet.
Actually I wanted to try creating integration with ByD and wasn't aware that should have to buy it first. (I should have guessed it that nothing is free from SAP ).
Will ask my boss to buy it.
Thanks for your time and help Guys.
Thanks Sri as well.
Regards
Asad
Similar Messages
-
SAP JAM integration with Cloud for Customer
I'm in the middle of the setup of the SAP JAM to C4C integration and using the guide here https://websmp109.sap-ag.de/~sapidb/012002523100002202222015E/C4C_JAM_WP_1502.pdf.
In section 2.4.1.1, it says "Contact your SuccessFactor, SAP Jam customer support or administrator to get the SuccessFactors Secured
Token Service certificate for your SAPJam company."
Since it is the first time I deal with SuccessFactors, I have no idea who to contact to get this "signing certificate". Do I need to contact the SF Cloud support team or is that something I can get on my own from our SuccessFactors instance?
CheersHi Thierry,
in general the guide refers to opening a ticket in the SuccessFactors support portal to request the ticket. As this is your first implementation you probably don't have a registered user in here.
Question:
Do you have someone else on the project/at the customer to help with the basic implementation of the SuccessFactors Platform? If yes, please ask this person to open a ticket with SuccessFactors support.
If not, then you can also open the ticket directly in C4C and it should be internally routed to the appropriate support contact.
Please note: In addition you will also need to do some basic configuration of the SuccessFactors Platform and SAP Jam. More information about initial steps to access and setup
the SuccessFactors Platform for SAP Jam can be found in the document „Setting up SAP Jam for Integration with other SAP Solutions” included in the package “SAP Best Practice for SAP Cloud for Customer Integration” available at http://service.sap.com/rds-cfc-erp
If you are interested in more information, please check out the respective training offerings for SuccessFactors Platform and SAP Jam available as "Academy Courses".
Hope this helps,
Ingo -
SAP Jam Integration with Cloud For Customer error
Hello Experts,
We are integrating SAP Jam with Cloud for Customer tenant. We have followed the instructions that are mentioned in 1311 guide for SAP Jam integration.
But right now we are getting an error on SAP FEED work center and Account View.
Error that we are getting is as follows:
You are not authorized to access /c/C0000209652T.com/widget/v1/feed?wid=1&auth=single_use_token&skin=gr&faces=true&type=follows&num_items=30&avatar=true&live_update=true&mobile=false&post_mode=inline&reply_mode=inline&single_use_token=&locale=en
Kindly help us understand the mistake or step that we might have skipped.
Thanks & Regards,
Chandan BankarMy example in the document deals with User ID as key_identifier.
ie., we need a unique key which is common to both servers so that we can identify accounts. This is done through assertion attribute exchange.
For eg, if I have an account with userID vatsav in C4C, then I must have an account with same userID in JAM (or vice versa) provided I set UserID for "Account Name Origin" in Step 10.
Doing this way, I am telling JAM that I am using UserID as an assertion attribute which identifies both my accounts in C4c and JAM without any problem. When you login into C4C using vatsav as UserID, it automatically searches feeds for same userID in JAM and displays them in Mashup.
It's a big concept actually. Implementation's already done by SAP.
Hope, I am clear. -
SAP Jam Integration With SAP Cloud For Customer
Hi Experts,
Can anyone have idea about how we can integrate the SAP JAM with SAP Cloud For Customer .
Any document or any guide please share with me.
Appreciate your help.
Many Thanks,
MithunHi Srivatsava,
I am getting the error while creating the Group under the SAP Cloud Opportunity
Sales - > Opportunity -> Group Tab -> Create New Group
Kindly check the below screen for same.
can you please help me what step require to solve this issue.
Waiting for you response.
Many Thanks
Mithun -
Integration with Websphere 5.0 (EJB 2.0) problems
Hello all,
Although a bit new to JDO, I have been trying to integrate Kodo 2.4 with
Websphere 5.0 (using EJB 2.0).
I have been basically binding a PersistenceManagerFactory into JNDI via
start-up servlet, however got the exception bellow when I tried to create
PersistenceManagerFactory (in setSessionContext of the EJB).
<i>JDOFatalInternalException: Could not perform automatic lookup of EJB
container's javax.transaction.TransactionManager implementation. Please ensure
that you are running the application from within an <b>EJB 1.1</b> compliant
EJB container, and then set the
com.solarmetric.kodo.ee.ManagedRuntimeProperties property to the appropriate
value to obtain the TransactionManager.</i>
The reference to EJB 1.1 actually scared me a bit. Does this imply that
Kodo (2.4) does not support J2EE 1.3?
Would you know how to set the
com.solarmetric.kodo.ee.ManagedRuntimeProperties to make it work with WSAD
5.0?
Thank you,
PetrPetr-
Is the integration with Websphere 5.0 application server officially
supported? Has anobody (that you know of) done it successfully yet?Yes, we do have reports of people using Kodo successfully from within
Websphere. However, it should be noted that it is not as rigorously
tested internally at SolarMetric as some other application servers (E.g.,
JBoss and WebLogic). In short, integration is known to work, but it
might be a little more rough around the edges than for other application
servers (as shown in our misspelling of Websphere's TransactionManager
implementation name).
How do I tell Kodo to use existing Datasource managed by app server?You can have Kodo use a named DataSource by specifying the
javax.jdo.option.ConnectionFactoryName property (see
http://www.solarmetric.com/docs/2.4.0/docs/manual.html#javax.jdo.option.ConnectionFactoryName).
This is often more appropriate for applications server usage, since it
allows you to configure pooling and other information from within the
application server's centralized configuration.
javax.jdo.option.ConnectionDriverName=COM.ibm.db2.jdbc.app.DB2Driver
javax.jdo.option.ConnectionURL=jdbc:db2:snetWhat kind of driver is COM.ibm.db2.jdbc.app.DB2Driver? The DB2
configuration we use for testing with IBM's drivers is:
javax.jdo.option.ConnectionDriverName=COM.ibm.db2.jdbc.net.DB2Driver
javax.jdo.option.ConnectionURL=jdbc:db2://SERVER_NAME/DATABASE_NAME
They shouldn't behave differently (I am guessing that the app driver is
a type 2 driver or something), but it might be worth a shot to try using
the net driver. If this fixes the problem, please let us know, because
it will indicate that Kodo has a deficiency with one of IBM's drivers
that we should look into resolving.
Since I have been trying to integrate with App server, this is the
initialization code that I use to bind PersistenceManagerFactory to JNDI.
You may find some funny stuff there.The binding code looks fine, and you are obviously able to retrive the
PM and start persistence operations. Note that you should also be able
to deploy Kodo as a Resource Adapter (which allows Kodo configuration
through the centralized Websphere configuration interface). However, I
doubt this is part of the issue.
So, in short, I recommend trying the following things:
1. Using the ConnectionFactoryName to use the DataSource defined for the
appserver, on the off chance this will fix it.
2. Using the net driver instead of the app driver.
3. Seeing if it will work with javax.jdo.option.Optimistic set to false
If none of these work, please let us know, and we will continue to
investigate other possible solutions.
In article <[email protected]>, Petr Bulanek wrote:
Hello Marc,
Very good guess. Pretty much the same code worked well without App server.
In that case, there obviously was no magic related to
TransactionManagerFactory initialization (see bellow).
Is the integration with Websphere 5.0 application server officially
supported? Has anobody (that you know of) done it successfully yet?
How do I tell Kodo to use existing Datasource managed by app server?
Here is the basic configuration (URL, class, etc):
javax.jdo.PersistenceManagerFactoryClass=com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory
javax.jdo.option.ConnectionDriverName=COM.ibm.db2.jdbc.app.DB2Driver
javax.jdo.option.ConnectionURL=jdbc:db2:snet
javax.jdo.option.Optimistic=true
javax.jdo.option.RetainValues=true
javax.jdo.option.NontransactionalRead=true
We use DB2 Version 7.2/Version 7.1 FixPak 3 for Windows, in case it helps.
Since I have been trying to integrate with App server, this is the
initialization code that I use to bind PersistenceManagerFactory to JNDI.
You may find some funny stuff there.
The new EESimpleConfiguration(true) construct seems to (by default) read
the kodo.properties file that is part of the project.
EEConfiguration conf = new EESimpleConfiguration(true);
conf.setManagedRuntimeProperties(\"TransactionManagerMethod=com.ibm.ejs.jts.jta.TransactionManagerFactory.getTransactionManager\");
conf.setManagedRuntimeClass(\"com.solarmetric.kodo.ee.InvocationManagedRuntime\");
EEPersistenceManagerFactory pmf =
new EEPersistenceManagerFactory(conf);
InitialContext ic = new InitialContext();
ic.rebind(\"KodoPMF\", pmf);
Thank you,
Petr
Marc Prud\'hommeaux wrote:
Petr-
It looks like DB2 doesn\'t like our attempt to close the connection
without a rollback or commit. This is odd, since we have never
seen this happen in our stand-alone DB2 tests. Can you let us know
the connection details (driver, connectionURL, etc)?
In the meantime, one possible workaround may be to turn off
optimistic transactions (since this will cause the PM to
only use a single Connection); can you try to specify:
javax.jdo.option.Optimistic=false
Also, have you tried to run this code in a non-managed environment
(e.g., outside the application server)? I would be interested
to know if it is related to running within an appserver.
In article <[email protected]>, Petr Bulanek wrote:
Hi Abe,
Thank you for a speedo reply. You guys really are on the ball!!!
As you suggested, the
\\\'com.ibm.ejs.jts.jta.TransactionManagerFactory.getTransactionManager\\\'
did the job (for others, please note that the proper package name should
contain \\\'jts.jta\\\', not \\\'jts.jts\\\').
Unfortunately, I got another problem. When running a method containing
query (code bellow),
I get SQLException complaining about \\\'Invalid transaction state\\\'.
The method that executes the query is a stateless transactional Session
bean.
Thank you for your help,
Petr
--------------------------- DB2 - transaction state description
CLI0116E Invalid transaction state.
Explanation: There was a transaction in progress when SQLDisconnect was
called.
User Response: Call SQLTransact before calling SQLDisconnect.
--------------------------- Exception ------------------------------------
[2/01/03 16:34:19:050 EST] 563ddb8a SQL I
com.solarmetric.kodo.impl.jdbc.SQL [ C:336042896; T:1446894474;
D:118283149 ] preparing statement <369367952>: SELECT DISTINCT
PARENTX.JDOCLASSX FROM PARENTX
[2/01/03 16:34:19:050 EST] 563ddb8a SQL I
com.solarmetric.kodo.impl.jdbc.SQL [ C:336042896; T:1446894474;
D:118283149 ] executing statement <369367952>: [reused=1;params={}]
[2/01/03 16:34:19:061 EST] 563ddb8a JDBC I
com.solarmetric.kodo.impl.jdbc.JDBC [ C:336042896; T:1446894474;
D:118283149 ] close:
com.solarmetric.datasource.PoolConnection@14079b90[[requests=6;size=6;max=70;hits=0;created=6;redundant=0;overflow=0;new=6;leaked=0;unavailable=0]]
[2/01/03 16:34:19:061 EST] 563ddb8a JDBC I
com.solarmetric.kodo.impl.jdbc.JDBC [ C:336042896; T:1446894474;
D:118283149 ] close connection
[2/01/03 16:34:19:061 EST] 563ddb8a JDBC W
com.solarmetric.kodo.impl.jdbc.JDBC [ C:null; T:1446894474; D:118283149 ]
exception when closing connection
[2/01/03 16:34:19:541 EST] 563ddb8a JDBC W
com.solarmetric.kodo.impl.jdbc.JDBC TRAS0014I: The following exception
was logged COM.ibm.db2.jdbc.DB2Exception: [IBM][CLI Driver] CLI0116E
Invalid transaction state. SQLSTATE=25000
atcom.solarmetric.datasource.ConnectionWrapper.close(ConnectionWrapper.java:243)
atcom.solarmetric.datasource.DataSourceImpl$AbstractPool.close(DataSourceImpl.java:690)
atcom.solarmetric.datasource.DataSourceImpl.close(DataSourceImpl.java:373)
atcom.solarmetric.datasource.DataSourceImpl.close(DataSourceImpl.java:347)
at com.solarmetric.datasource.PoolConnection.close(PoolConnection.java:70)
atcom.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.close(SQLExecutionManagerImpl.java:885)
atcom.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.release(JDBCStoreManager.java:654)
atcom.solarmetric.kodo.impl.jdbc.ormapping.SubclassProviderImpl.getSubclasses(SubclassProviderImpl.java:274)
atcom.solarmetric.kodo.impl.jdbc.ormapping.ClassMapping.addSubclassConditions(ClassMapping.java:1239)
atcom.solarmetric.kodo.impl.jdbc.ormapping.ClassMapping.selectPrimaryMappings(ClassMapping.java:1218)
atcom.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.executeQuery(JDBCStoreManager.java:717)
atcom.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.executeQuery(JDBCQuery.java:92)
at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:792)
atcom.solarmetric.kodo.query.QueryImpl.executeWithArray(QueryImpl.java:668)
at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:609)
at com.testkodo.ejb.ControllerBean.observeHumans(ControllerBean.java:66)
--------------------------- Failing code sample
try {
PersistenceManager pm = factory.getPersistenceManager();
Extent ex = pm.getExtent(Parent.class, false);
Query q = pm.newQuery(ex, \\\"name==parName\\\");
q.declareParameters(\\\"String parName\\\");
Collection col = (Collection) q.execute(\\\"James\\\");
Iterator iter = col.iterator();
Parent pp;
Collection ch;
while (iter.hasNext()) {
pp = (Parent) iter.next();
System.out.println(pp);
ch = pp.getChildren();
Iterator it= ch.iterator();
while (it.hasNext()) {
System.out.println(it.next());
q.closeAll();
pm.close();
} catch (Exception e) {
System.out.println(e);
throw new EJBException(e);
Abe White wrote:
The reference to EJB 1.1 actually scared me a bit. Does this imply that
Kodo (2.4) does not support J2EE 1.3?
EJB 2.0 is also supported. Sorry for the confusing error message.
Would you know how to set the
com.solarmetric.kodo.ee.ManagedRuntimeProperties to make it work with
WSAD
5.0?
Try these settings:
com.solarmetric.kodo.ee.ManagedRuntimeClass=\\\\
com.solarmetric.kodo.ee.InvocationManagedRuntime
com.solarmetric.kodo.ee.ManagedRuntimeProperties=\\\\
TransactionManagerMethod=\\\\
com.ibm.ejs.jts.jts.TransactionManagerFactory.getTransactionManager
Marc Prud\'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com -
OIM 9.1.0 Integration with Active Directory 2008 R2
Hi,
My customer is running Root/Child AD structure based on windows 2003 w/SP2, OIM 9.1.0 deployed under one of the child domains, and integrated with child domains controllers which runs windows server 2003 as well.
My customer has decided to upgrade his AD to Windows Server 2008 R2 domain controllers across the entire AD Forest and still wants to integrate the current OIM v9.1.0 with AD for all of his Users provisioning and password synchronizations.
Am not sure if current OIM version of OIM 9.1.0 is compatible and supported by OIM v9.1.0 under active directory version 2008 / R2, and not sure if it can be integrated with such AD version.
Any guidance is really appreciated.
Also I was thinking of such scenario but also not sure of its support ability and if OIM will keep working on such scenario, the scenario is to upgrade only the AD root domain to Windows 2008 R2 while keeping the child domain holding the OIM 9.1.0 at Windows 2003 version.
Is this a working and supported scenario by OIM v9.1.0 ?I believe you question should be if the connector supports this architecture. Check out the versions supported for the connector you are using and you should be good.
-Bikash -
Service desk integration with 3rd party tool
Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietschcan you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…
-
Java Stack mandatory for a SAP BI system integrated with EP?
Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
KumarHI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar -
Session keep Alive when EBS is integrated with OIF acting as SP
We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
The integration is successful and EBS is able to authenticate using this third party SSO.
Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
So my question is how we can call this java script for each page load for EBS?
Thanks & Regards
SarbashisIt appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
Result: 200. Set-Cookie OAM-ID to expired.
Form Submits: https://sso.mycompany.com/fed/user/sloosso
Result: 500 Error
Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
Then I am successfully logged out.
This seems almost like a bug in OAM... -
RE: Legacy Integration with PI/Open
Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/> -
Excel integration with Entry and Approval for SSM not working
Iu2019m having trouble getting excel integrated with E&A for being able to enter large number of historic data points into a cube-built model u2013 Iu2019ve gone through all the docs several times and there is no good concrete explanation on how to do this. I keep getting the following error message:
Error opening Excel Automation server can't create object. This can be caused by:
1. - The application is not installed on your machine
2. - The browser security does not support ActiveX scripts.
3. - Your were prompted to run ActiveX and you said No, if that is the cause close all browser instances and reopen.
However, I've done the following:
- Iu2019ve installed the excel add-in on both the server and my local machine, and Iu2019ve enabled the add-in part in Excel on my local machine.
- The browser security is definitely set to accept all active X scripts
- I am never prompted to run activeX when I select u201CHistorical Datau201D within entry/approval. I just get the above error message.
- Iu2019ve flushed cache and restarted listener several times.
What am I missing? I donu2019t see it in any of the docs.
Thanks!Robb,
Looking at what you've done, there doesn't seem to be an obvious answer. The best suggestion I can make is to fill out a support ticket on this. There must be other factors at work here that will require a deeper look.
Regards,
Bob -
Jabber cannot Call - Integration with CUCM/AD
Dear all,
I installed CUCM 9.1.1 and CUPS 9.1.1 with Jabber client 9.0.1.
when I run Jabber on a joined domain PC (login with AD username and password), there are no problem with the calling ability.
But when I try to use a non-join domain PC (I am using VPN to connect to office network and using my personal PC), only the chatting feature that are available. I cannot loggin to phone accounts and cannot make any calls with my Jabber client.
Should I use UDS integration with AD?
Thanks,
HasanHi Hasan,
Can you take a look on this thread:
https://supportforums.cisco.com/message/3914353#3914353
If you still have problem connecting, can you try with newer version of Jabber?
Regards,
Srdjan -
CUCM 8.6.2.20000-2 integrated with Office 365?
Hi people,
VOICE MAIL APPLICATION:
Does anybody knows something like that? How to integrate with Cisco Unified Communication Manager 8.6? It is similar the integration with Exchange 2010?
Best regards,
DanielUnless you can create a SIP trunk on Office 365 and allow traffic to pass between CUCM and Office 365 across the SIP trunk it would not work. Cisco never supported any Exchange UM for voicemail, it works, but if you have issues Cisco is not going to help you there. No different here, if you can get it to work based on the above, then support is on you.
HTH,
Chris -
Unity Connection Integration with CS 1000 and Meridian 81 - PIMG
I have a customer who have (2) Nortel Meridian 81 and (1) CS1000 for their 3 locations along with Octal 350 servicing 2500 voicemail users today. Customer also has a Cisco UCM in their network today which is servicing their wireless phone users.
UCM and CS1000 are networked together using Q.Sig trunks today. Customer is looking at replacing their Octal solution with a new Voice mail solution.
I was looking at integration documents for Unity Connection using PIMG.
In this scenario, would I need 3 separate PIMG 's at the three remote sites and integrate it with Unity connection or Can I achieve this using just one PIMG at one of the sites, considering the three sites are trunked together using tie-trunks.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/7x/integration/pimg/guide/cucintpimg090.html#wp1051831
Appreciate any pointers/ help.Hi there,
Just to add a note to the great tips from Hailey (+5 Hailey!)
We are in the final stages of replacing our "old" Octel with Unity Connection, part of
which is integrated to our CS1000 and CUCM in a "Hybrid" deployment like yours
Centralized Voice Messaging
Cisco Unity Connection supports centralized voice messaging through the phone system, which supports
various inter-phone system networking protocols including proprietary protocols such as Avaya DCS,
Nortel MCDN, or Siemens CorNet, and standards-based protocols such as QSIG or DPNSS. Note that
centralized voice messaging is a function of the phone system and its inter-phone system networking,
not voice mail. Connection will support centralized voice messaging as long as the phone system and its
inter-phone system networking are properly configured.
Setting Up a Nortel Meridian 1 Digital PIMG
Integration with Cisco Unity Connection
Attachments:
cucwithnortel.pdf (308.1 K)
Centralized voice messaging provides voice messaging services to all users in a networked phone system environment. Connection can be hosted on a message center PINX and provide voice messaging services to all users in an enterprise assuming the message center PINX and all user PINX phone systems are properly networked.For a centralized voice messaging configuration to exist, a suitable inter-phone system networking protocol must exist to deliver a minimum level of feature support, such as:•Message waiting indication (MWI).•Transfer, which ensures that the correct calling/called party ID is delivered to the voice messaging system.•Divert, which ensures that the correct calling/called party ID is delivered to the voice messaging system.Other features may be required depending on how the voice messaging system is to be used. For example, if it is also serving as an automated attendant, path-replacement is needed as this feature prevents calls from hair-pinning.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/design/guide/7xcucdg050.html#wp1053538
Cheers!
Rob -
How is the integration with ECC in SRM 7.0??
Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
ThanksSRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish
Maybe you are looking for
-
Write to file(AVI) synchronizate data
I receive a USB Camera signal and a CAN(Control Area Network) signal. I like two signal parallel displaying and write to file (one or more) and after read. I practise IMAQ AVI Write Frame.vi with DATA. I receive USB Camera signal around 15fps (but th
-
How to lmplement table in applet
hi friends im not known how to implement table in applet using " java.applet.* " class plz reply as soon as possible..
-
My HP photosmart 8250 only prints from a memory card.....one day it completely stopped printing when it was connected to my PC. I uninstalled it from my pc, went back in to re-install it but the software install wouldn't take as error msg came up and
-
Apple TV 2.0 Upgrade - Avoid
Apple TV 2.0 Update Do not upgrade!!!! Apple Tv 40Gb model. Downloaded upgrade, Apple TV rebooted twice , since then flashing amber light, not even an apple logo. Have they just cost me £400 You can hear hard drive clunking. Will not boot up. Cannot
-
Not able to connect to Coherence JMX
We have a 4 node coherence cluster with 2 weblogic application server nodes and 2 coherence server nodes. In one of the coherence server nodes we have set the following JMX related properties- tangosol.coherence.management=all tangosol.coherence.mana