Jam Plus Bluetooth Speaker Won't Connect

Bought new Jam Plus BT speaker, but it won't connect to my 9470M EliteBook.  Other BT devices work just fine.  Item shows up after "adding new device," but yellow trouble triangle indicates it's a driver issue.  In device driver list, it shows up under other devices.  Checked my BT settings and eveything's checked for discoverable, etc.  Speaker pairs and works with my iPad, so not a speaker issue.  CS at Jam says its an HP software problem.  Already downloaded SP67005.  Any other suggestions?

Hello @SD28 ,
Thanks for posting on the HP Forums!
I understand you are experiencing an issue with your notebook. However, since this is a commercial notebook, you should post your issue on the notebook board of the HP Enterprise Forums for a better answer.
Have a wonderful day!
Mario
I worked on behalf of HP.

Similar Messages

  • HT204387 Jam plus Bluetooth

    Bluetooth pairing issues with a pair of Jam Plus speakers switching between my Ipad2 and IPhone5

    I had the same problem too. If you previously had the Jam Plus connected to another device please disable the Bluetooth on that device. Now on your Jam Plus itself you must hold the button that has the play and pause sign. Hold that button for five seconds or until you see the blue light above the Bluetooth sign starts blinking faster. The Bluetooth sign will be located on the right side next to the plus sign. Once the blue light starts blinking faster go on to the device that you want to pair it to. On your device in the Bluetooth settings it should say Jam or Jam Plus. It should definitely say something with the work Jam. Ounce you press Jam or Jam Plus on your device you will hear the Jam Plus make a sound that last 1 second indicating that it’s paired with your device. I hope this helped you.

  • Bluetooth speaker does not connect automatically in windows 8.1

    before the upgrade (?) to 8.1,if i turned on my bluetooth speaker,it automatically took over from the speakers of my laptop.No drivers,no further changes needed.
    After upgrading to 8.1 i have to disconnect the speaker,connect it again,then set the speaker as my standard speaker.then it plays.every time again and again.
    how do i fix this?

    Me too.  It shows that it connects and briefly reads "Connected" and then quickly switches to "Not Connected".  My Windows Phone 8, when trying to connect to Windows 8.1 PC via Bluetooth is doing the same thing and I
    receive this both from the PC and the phone.  My phone does successfully connect to my Bluetooth speaker, but not from the PC only from the phone.   Has this been fixed yet and I missed it?  One thing
    I've learned while being a part of a smaller market share having had a Windows Phone for several years now, the solutions come quietly and sometimes go unnoticed.  Only later will I find myself thinking, "Oh yeah it works now, they've created a solution". 
    Case in point: Red Laser stopped working then shortly thereafter there was the Eye icon available at the Bing screen that can scan just about anything that can be scanned.  Is there a similar thing happening with my Bluetooth device drivers from my 8.1
    PC and I need to manually push something?  When there is a solution, will you please alert me and the rest of this thread?  Thanks much in advance!

  • UE Boom Bluetooth speaker failed to connect after upgraded to iOS 8.2

    After upgraded to iOS 8.2 on 2x iPhone 6 64GB (Gold & Silver) + iPad Mini, UE Boom Bluetooth speaker can never been "detected" nor connected.
    Reset all settings does not help.
    (UE Boom firmware was upgraded to v1.451 which supports Bluetooth 4.0 for remote power on/off).

    Howdy Tampo,
    If you are still unable to connect to or see your bluetooth speaker on your  iPad I would use the troubleshooting in this article to help you further:
    iOS: Troubleshooting Bluetooth connections
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • MacBook Pro & JBL Charge bluetooth speaker won't pair.

    My Macbook Pro will not pair with my JBL Charge Bluetooth speaker.  I am operating OSX 10.8.4. The speaker isn't picking up on the bluetooth Mac to be found. Pairs with my iPhone 5 with no problem, but not the iPad mini or MacBook Pro. Anyone else have this problem?

    I found this hit better https://discussions.apple.com/message/22091984#22091984#22091984

  • N82 bluetooth modem won't connect

    I get the error "Failed to connect to the internet. One touch access could not connect to the selected device."
    I have bluetooth modem selected, am connected via bluetooth & can do everything else. It works using USB cable but not bluetooth which would be much handier for me.
    I'm using XP & PC Suite 7.0.8.2
    Nokia N8 on Belle

    From the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. How far do you get?

  • Bluetooth peripherals won't connect

         bluetooth peripherals won't connect

    My car don't work says very little. Some detailed information would help so folks don't have to play 20 questions.

  • Bluetooth speakers won't connect with new Macbook Pro

    I just sold my Macbook Pro (mid 2012 release) and purchased the brand new lighter, faster Macbook Pro Retina display that was just released a couple of weeks ago (Mid 2014).
    There are a host of things this new Pro can't/won't do (which I didn't know upon purchasing it), but my question right now is: why won't my bluetooth speakers (which worked great with my other Macbook Pro) properly connect/work with my new one?  The bluetooth recognizes the speakers--it says they're there in the bluetooth set up--but they don't work, nor do they show up in my sound options (In my system preferences, only the internal speakers are listed as available output devices).  Why would they be visible but not able to be connected?
    Is there a fix?  Can I get my bluetooth speakers to work?  Or are these more things (along with my Apple Remote) that I have to scrap?
    Thanks!

    Me three.  Does not work at all, extremely frustrating for an educator who relies heavily on this technology

  • Hi my harman kardon ms 100 dock system speaker won't connect to my iphone4 anymore, keeps say the device is not supported anymore,why, plz can u give a solution

    Hi my harman kardon speaker dock ssytem wont connect to my iphone 4 anymore, keeps saying the device is not supported any more why!, plz can anyone give me a solution to it!

    Hi my harman kardon speaker dock ssytem wont connect to my iphone 4 anymore, keeps saying the device is not supported any more why!, plz can anyone give me a solution to it!

  • Targus comfort bluetooth mouse won't connect

    Hi,
    just bought Targus bluetooth mouse:
    http://www.targus.com/us/productdetail.aspx?sku=AMB09US
    However, my computer is not able to recognize it. When I try to connect it to the different computers, it works without problems so the problem must be on the side of my pc.
    I own Lenovo Ideapad Yoga 13.
    Any advice will be highly appreciated,
    Thank you,
    Jacob

    hi Fredecumber,
    Welcome to the Lenovo Community.
    Can you try to follow this article on how to pair a bluetooth device on Windows 8.
    Also, when you try to pair the Targus bluetooth mouse to your Ideapad Yoga 13, do you get any error messages? Does it even see the mouse on the bluetooth device list?
    Let me know your findings
    Cheers
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Photosmart Plus B209a-m Won't connect to iPhone Hotspot

    This is my first time to post.  Hopefully, someone can help me.  My friend is using a Verizon iPhone as a hotspot.  He can connect 5 devices to the iPhone hotspot.  When I attempted to connect his Photosmart Plus B209a-m to the hotspot, the laptop loses the wireless connection to the hotspot.  The printer installation wizard gets to the point where it finds the SSID and I enter the security phrase.  When the install process reaches about 40%, the his laptop loses the wireless connection.
    The only way to reconnect the laptop to the iPhone is to disable the printer wireless radio or turn the printer off.
    The hotspot uses WPA-PSK security.  I noticed that when the wizard found the hotspot it showed WPA security not WPA-PSK. 
    Is there an update for the printer so that it can connect using WPA-PSK? I could not find one.  Or is there something else that I need to do to make the printer connect to the iPhone hotspot. 
    I worked with Verizon support then with Apple support but since we can connect 2 laptops and a Smartphone to the hotspot, they say it is a printer issue.
    Thanks.

    Are you sure the hotspot uses WPA and not WPA2 (with or without the suffixes of PSK or AES is all the same)?
    The printer will probably not connect to WPA2.  Is there a way to change the iPhone encryption?
    Actually, is there a way to remove the encryption altogether for testing purposes?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Macbook Air (Mid-2013) and iPhone 5s IOS version 8.1 won't connect via bluetooth, anyone know how to fix this problem?

    I have a Macbook Air running OS-X Yosemite and an iPhone 5s running IOS version 8.1. Every time I try to connect the devices via bluetooth is won't connect saying my Macbook Air isn't supported when in actuality it is. Anyone know how to fix this issue? I have restarted both my Mac/Iphone and have turned bluetooth on/off and nothing seems to help. Bluetooth pairing didn't work before I updated to IOS 8.1 so I doubt that is the issue here.

    Pairing an iPhone to a computer (Mac or Windows) is only supported for personal hotspot (sharing the iPhone's cellular internet connection) and then only if your cellular plan supports it. More information: Bluetooth: Why can't I pair my iPhone or iPad with my computer?

  • I am trying connect my jam 2 speaker to my iPhone 5c it won't connect any ideas

    I Am trying to connect my jam 2 speaker to my iPhone 5c . I have done it before
    I don't know what to do I am going through music withdrawals

    Go to Setting then bluetooth and then under were you can turn bluetooth on and off, there should be a place where it says device. Your Device should come up and you should be able to tap it and connect to it. If you see your device there and it won't connect then tap the i with a circle around it and then hit forget this device. Wait a few minuets and then search for the device again then try to connect to it.

  • When I try to use my JBL speaker, it won't connect to Bluetooth at all with my iPad Air

    My iPad Air won't connect to Bluetooth so I can use my iPad Air and JBL speaker. I keeps saying it is searching for devices.....any idea what to do. I'm using wi-fi

    I suspect it won't pair with your iPad, because it's paired with your phone, even though the phone is off. Do you have the instructions for pairing the speaker?  If you don't, google them and see if the device can be paired with multiple devices.

  • IPad air won't connect to Bluetooth speaker?

    My new iPad air will not connect to my Vizio Bluetooth speaker.  When I put both devices in discover mode, the speaker is listed on the iPad, but will not connect?  The speaker connects just fine to my iPhone, or to my older (original) iPad.  I have re-booted the iPad, and powered down(unplugged) the speaker, but no help. 

    Bluetooth on my iPad air won't find my android phone, but the phone has apparently paired with the iPad. They just won't talk. Same problem with my wife's iPad 4, won't discover anything at all! I know that Apple is known for not communicating with non Apple products but this is ridiculous. Any ideas? Thanks ;)

Maybe you are looking for

  • How do I get the returned cursor from a stored procedure to an asp.

    Sorry if this topic has been answered before but I am new to Oracle and ASP. I have been asked to create some stored procedures and access the results from the ASP. I will be passing one variable in and could be getting upto 200 rows returned. I have

  • IPHONE 4 Temperature too hot needs to cool down????

    I waited 12 hours in line for my iphone 4 and got it today. Got it activated in the store, worked fine. When I got home, it started saying "Temperature too hot, needs to cool down". It wont let me charge or sync. The phone is not even warm, as I had

  • Opening post-it notes created with Acrobat X

    If I send a PDF created with Acrobat to someone without this software, will that person be able to open the post-it notes using Adobe Reader?

  • A Question About Message Driven Bean Exception Handling

    "Your onMessage method should handle all exceptions. It must not throw checked exceptions, and throwing a RuntimeException is considered a programming error." The above sentence is from the JMS documentation. I will use a message driven bean for guar

  • Phone or Firmware?

    Ok, so here is the history, I had to have my phone replaced because the mic on the head phones was not working. So it was a problem with the headphone port. Now I have a new phone and ever since i have had the new phone I have had a problem with the