January imagin Driver update

Hi Guys,
Just a quick question, we are running 10.3.1 and are in the process of making a new zcm 11 zone to migrate everyone over too. The release notes for the January driver updates only refer to 10.3.2, as I'm moving away from that zone, I really don't want to upgrade it (and have to deal with the associated hassle it always introduces).
So my question is, can I apply the January Imaging Driver update to a 10.3.1 system?
Thanks
Dave

Originally Posted by Cptdave
Thanks Shaun, I'll give it a shot, I just wanted to make sure it wasn't a definite no no.
FYI, we have deployed the Jan update to our 10.3 ZCM without any issues.
Thomas

Similar Messages

Jan 2014 Imaging driver update issues

I upgraded my ZCM Primary server from 11.2.2 to 11.2.4 over the weekend. Today I downloaded the Jan 2014 Imaging Driver update from the 11.2.4 patches page. I downloaded the zenworks11.2.4_MU1_Jan14 that said it was for 11.2.4 and 11.2.4 MU1. I followed the readme.txt file that says to run the imaging_driver_update.bat file. I ran this and I get:
"Applying wrong imagin driver updates........Exiting driver update."
Does anyone have any solutions to get this fixed up? If I go to %zenworks_home%\share\preboot\update and look at the ZUpdate.sig file it shows 112303 for the [zen_client_version] If I go into the ZCC management page and look under the primary server all of the version show correct as being 11.2.4.
Thanks for any information you can give. I also cannot PXE boot at this time as well. It gets through PXE fine and I choose "Start Zenworks Imaging Maintenance" from the Imaging menu screen and then it starts loading but then pops up "cannot connect to Zenworks repository" or something like that. I don't have it right in front of me now.
Thanks for any help.
Andrew
Network Administrator
West York Area School District

Marceldejager,
> Anyone any idea's?
yes - read the screen when you go to the November Update you are redirected to the Monthly Update, sure - but at the top, with a bright yellow background are the words
"You have been automatically redirected to this patch because it supercedes the patch you originally requested. The patch you originally requested is still downloadable, click here to download it instead of this newer patch."
if you click on the link it takes you to the patch you want...
Shaun Pond (now working for ENGL)
newly reminted as a Knowledge Professional

Driver update for Win 7 USB issue on nVidia chipset systems now available

This patch is needed for the TouchSmart 600 AIO Desktop series if you haven't installed it.
http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...

The update is not part of the desktop Win7 update disc from MS or HP - Microsoft has not yet integrated it into Win7, and it is not yet available on Windows Update (it is likely to hit there sometime in January). It was available too late to get it out on HP Update before the holiday break. I don't believe there have been any rolls to the Win7 upgrade disks. I do recommend (while still on Vista) running HP Update and installing all applicable updates - PRIOR to doing the Win7 upgrade. Also - I'd double check the drivers page for your system for any Vista updates as well, best to do any driver/BIOS/Video BIOS updates prior to the Win7 upgrade process. I know that some of them were created before Windows 7 was out - and may not want to install if it sees the newer OS.
As to the fix - this could manifest itself in many ways - but essentially - this resolves system flakyness with USB devices attached . Some internal devices (card readers, touchscreens, some Wireless LAN interfaces) connect via USB - so they could be affected, even if you haven't hooked up anything to your system externally.
Not sure just what problems you were experiencing, so can't say this was the cause (and will be the fix) - but if it applies to your system - I'd definitely give it a shot. I checked a couple of systems that had this update - I see it now on the software drivers and update page for them, so it looks like it rolled out OK.
Happy Holidays...
-DM (an HP employee, but the time and comments here are my own, not my employers)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

HP Laserjet 1200 and Driver Updates

On the "Download Drivers and Software" support page for the HP Laserjet 1200 printer, there is an option, "Automatically check to see if your driver needs updating".
A machine that I am supporting is having a MS Word collating issue (sometimes works, sometimes doesn't) and I don't know if its a driver issue or not. The machine is XP SP3.
If I click on this link, obviously it will check the drivers, but:
1) Will it give me the option to automatically update the drivers if it finds they are outdated, and
2) How do I roll back to the old driver if the update introduces problems?
Since this potential driver update isn't going through the normal MS XP driver update routine in Device Manager, I'm leery that I won't be able to recover if something goes wrong.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

NVIDIA GeForce 8600M GT driver update?

How is this done? I can update it in my Boot Camp installation running WinXP but how do I update it under MacOS X? Is it included in the regular OS updates or do I have to do something else? I noticed the other day that there's an update for the 8- series ( which would be what I have if I'm not totally mistaken ) among others.

I don't believe there are any driver updates for OS X.

Not able to add driver update during Solaris 10 installation on IBM x3550

I am facing a problem with installation of Solaris 10 on IBM x3550.
My question is not specific to IBM server.
I am trying to add SAS driver during Solaris 10 installation. I selected option "Apply device driver update" (option # 4). It is asking to insert driver disk. But only showing floppy (f) and cdrom (c).
IBM server 3550 doesnt have floppy drive and I have the driver image only in a USB stick. Unfortunately, Solaris 10 installation is not showing usb device during driver installation.
Is there any way we can add usb device to the driver update disk list??
Thanks in advance.

Does no one have an idea?

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

After the driver update 2.7 released by Apple I can not print on my Epson Stylus Photo RX650. Epson tells me it is apple's fault.
This is the message from Epson:
The driver update 2.7 was released by Apple. The driver released by Epson is available for download from the Epson Australia web site. It is the Apple update driver download that has caused the problem.

Blank screen after display driver update Satellite Pro P200

I installed the latest ATI Mobility Radeon HD2600 display driver (8.432, from the Toshiba site via Tempo) on my Satellite Pro P200 yesterday. On rebooting everything looks fine as far as the Windows Vista Business "Please wait ..." screen, but instead of displaying the login page I get a blank screen (with a mouse cursor that moves around as normal). All I can do at this point is power off, and I've run out of ideas on how to get any further.
Things I've tried:
# booting into safe mode, low-resolution video or last known good configuration all result in the same blank screen.
# connecting to the system using remote desktop (to disable the driver) isn't possible because the system hasn't loaded the network drivers yet.
# I can't revert to a restore point because Vista can't find any (I made a manual one after installing windows updates on a couple of days ago).
I can run a command prompt from the system recovery options and would prefer to use that to disable the driver +if+ I knew how before resorting to the more drastic options.
A web search (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
previous releases of the driver, but none of the links I've looked at give a solution that's available to me.

No joy with an external screen so I bit the bullet and reinstalled from the product recovery disk. I tried expert mode to retain the data partition but that failed twice, so I had to restore it from the previous day's backup after doing a full reinstall. Two consolations, though.
# It allowed me to increase the size of the data partition.
# The display driver update worked fine on the fresh install.
Needless to say I've since found [http://support.microsoft.com/kb/927525] which describes how you can disable a problem device driver (atikmdag in my case) from the system recovery command prompt :-(
Hopefully the instructions in there will help anybody who gets caught with similar problems.

Audigy 2 ZS, Driver update results in broken driver, no sound.

> I recently bought a used Audigy 2 ZS which works fine with the drivers from the CD. I don't know how old they are, Creative System Informations says driver version .82.0. That's why i wanted to update them. I had a Li've! before, so i knew how to update the drivers with the auto updater on the creative site. By the way, i did a clean up of the old drivers with Driver Sweeper before installing the new sound card.
When i do a driver update with the auto updater on the Creative website it downloads and install the newer drivers, but after the mandatory reboot i have no sound, and every Tool crashes, throws an error message or just doesn't work. I lose all my EAX effects and can't select any speakers. The only way to solve that is to uninstall everything and do a clean start with the CD.
I can update everything via the auto updater, except the drivers.
Using Audigy 2 ZS and Windows XP SP3
AMD Athlon XP 3200+
2 GB DDR-400 RAM
Geforce 6800GT 256MB

With XP I'm still using 2.8.000, they seem to work fine

RM 900 remote doesn't work after driver update

Hi!
After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
Any clue how to make it work again?
Using Windows XP SP3 and Audigy Platinum Ex.
Thank you again in advance.
PD: Excuse my poor english, it's not my nati've language.

Hello Jashue67,
Sorry to hear about all the trouble with the Apple TV. It sounds like you have done a restore but need to pair your Apple TV remote at this point. You can follow these steps to pair the remote:
Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
You can find the full article here:
Apple TV: Pairing and unpairing the Apple Remote
http://support.apple.com/kb/ht1555
Thank you for using Apple Support Communities.
Best,
Sheila M.

Satellite P200-1B6: Sound Driver update fails and HD-DVD Player doesn't work

I have just bought a Satellite P200-1B6 laptop and spent the day installing the updates recommended by the TEMPO program. One of these was a Sound Driver update from RealTek but on running this it fails about 80% of the way through with an error: 'Install Realtek HD Audio Driver Failure !!'.
Now the Toshiba HD DVD player fails to start with an error 'Unable to output the video to an external device.
Please switch your display device by pressing the Fn + F5 keys after ending the application'. I've tried this but it seems to have no effect.
I'm now regretting starting to update the installed drivers. Should I try to rebuild the machine using the recovery discs or is there another solution that someone has found? Or have others found the upgrade works?
Any advice welcome

Last month I upgraded my PC Satellite P200 (BIOS, Driver ATI HD2600, Package VAP and HD-DVD Player).
But after this update, I was no longer be able to read my HD-DVDs
Error message was: "Unable to send the video to an external device. Please turn off the display device."
The problem was much of the update Realtek R1.76 (Realtek Sound Driver - 6.0.1.547 - 20/11/07) currently proposed on the site toshiba.
Indeed, the P200-1DE is equipped with Realtek ALC268 Audio Codec.
The latest update of this codec is R1.89. I downloaded from the site Realtek and it has allowed me to solve the problem.
[http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level= 4&Conn=3&DownTypeID=3&GetDown=false]
I have no problem since that last update

I did the canon driver update but now my printer no longer works

As part of Software Update, my Canon inject printer driver was updated to Version 3.0. The printer had worked under Maverick but after the update, it said it wasn't online. I did all the various "solutions" such as resetting the printer, so now I when I try to add the printer back, no printers are "seen" even when directly attached via USB. I downloaded and reinstalled the Lion Canon Driver but nothing works. I have a Canon MP530.
I'm on a 2011 27-inch iMac running 10.9.3.

Had a similar situation and this is what I ended up doing:
1 - go to the HD/Library/Printers folder and select the Canon folder
2 - enter Time Machine and go back in time to before you ran the Canon printer driver update.
3 - select the Canon folder and restore.
That got my Canon printer working again for me.

Can't print since last epson driver update from Software Update

I have a Epson Workforce 600 connected wirelessly which was working just fine until I installed the driver update yesterday which was provided via Software Update. Now, I can print a test page via the Epson Software and my computer can see the printer but when I hit the "print" button on print dialogs, nothing happens. It's very strange, it seems as if the click isn't even recognized.
I've tried printing from multiple programs and it's all the same. Only printing a test page from the Epson software works at this point. Any suggestions?

The probable cause of this is that the /Library/Caches/Epson folder is missing.
There are several threads here about this issue with Epson printers: try deleting the <hard drive>/Library/Printers/EPSON folder and then reinstalling the software through Software Update or from the Apple download site. After installing the software, restart, delete and re-add the printer. That should recreate the /Library/Caches/Epson folder, and you should be able to print.
hope this helps.

Duplex printing not working after installing HP Printer Driver Update 1.1.1

Hi,
our printers (Lexmark T622, HP Laserjet 2200, both equipped with a duplex unit) are managed by printer queues on our Mac OS X Server (10.5.5). Our users (mostly having Mac Books running 10.5.4 or 10.5.5) are printing by sending their jobs to the queues on the Mac OS X Server (via IPP/TCP/IP).
So far so good.
It seems that the users who have installed the "HP Printer Driver Update 1.1.1" aren't able to do duplex-printouts anymore. All sheets that leave the printers are printed on one side only - the "Duplex" setting by these clients is just ignored. Users who haven't installed the update yet, don't have the problem (at least it seems to me like this, but I have to admit that I've tested it with only three different Mac Books, yet).
My questions are:
- Has anybody else observed this behaviour, yet?
- Or, even better, does anybody have a solution to it? Reinstalling the printer on an affected client doesn't solve it. That's what I tried already.
- Is there any possibility to make the printer driver update "undone", which means to do a kind of downgrade from 1.1.1 to 1.1?
Thank you very much in advance!
Best regards,
Steffen

Hi,
it seems that
http://discussions.apple.com/thread.jspa?threadID=1715794&tstart=0#8157481
fixes my problem.
Best regards,
Steffen

Problem with Latest Epson Printer Driver Update

I installed the Epson printer driver update that came out today, but it made absolutely no difference. My Epson printer is still using a the same old Epson driver plus Gutenprint. There is no other option. I don't get it. What's the point of installing the update if the printer is still stuck with Gutenprint? My printer (Epson Stylus Photo R340) is supported according to Apple's list.

alansky1 wrote:
Thanks for that tip, John. I found the "Epson SP R340 series" driver by searching for it as you suggested.
Happy to help Alan.
HOWEVER, I cannot print with this driver. I get the following error message when I try to print:
Error: Library/Printers/EPSON/InketPrinter2/Filter/rastertoescpll.app/Contents/MacOS/r astertoescpll failed
This seems common with the Epson drivers, there are several posts here with that problem. Some users have had success deleting the printer from Print & Fax Prefs and adding it again using the Epson (non-Gutenprint) driver. Others have had to delete the <hard drive>/Library/Printers/EPSON and /Library/Caches/Epson folders, re-download the update, then re-add the printer.
I would try the first one first since it's the easiest and you already have the update installed. If that doesn't work, the second should.
Hope this helps.

January imagin Driver update

Similar Messages

Maybe you are looking for