January upgrade, need help.

Ok after restoring my itouch after problem (it got fixed) I read from someone that you would need a file called iPod Touch app pack 4A97 but after that what do I do with it?

Ok my question is answered all anyone has to do is create a shortcut with the app pack then open it and have your ipod connected then you click sync and wait for about 4-5 minutes and it should work.

Similar Messages

Windows 10 upgrade need help

Hello! I can't upgrade widows 10, I got the message " NVIDIA Geforce 7100/NVIDIA nForce 630i " The display manufacturer hasn't made your disply compatible with windows 10. Check with the manufacturer for support. Computer Model Acer Aspire X1800 windows 7. I need help Please. Thanks

https://forums.geforce.com/default/topic/862957/geforce-drivers/nvidia-geforce-7100-nvidia-nforce-630i-windows-10-not-compatible-/

Nano - OS X Upgrade Needed - HELP!

Hey,
I need some help with my friends iPod Nano... she had an old 12" PowerBook which is running 10.3.9, but it says that it needs 10.4.9 or later.
The specs (from what I can remember) is 1GHz PowerPC G4, Memory: 256(?)MB Built-In
How can she upgrade to the one she's needing for the iPod Nano, she can't afford a new computer.
Now - I'm not sure if i can do this...
But when I got my PowerBook G4, it came with Panther installed, and came with the Tiger upgrade discs (2 of them), but I last October upgraded to Leopard - so the Tiger discs have just been sitting there... could I give her these disc to upgrade her computer to Tiger and she could get the rest (.9) from the software updates?
Or is there any other way she can get what she needs.

You cannot give her your discs to use, which probably would not work anyway. She can call AppleCare and through that route buy a retail copy of Tiger, or buy it from Amazon at a higher cost, or she could upgrade here memory on the PB to 1 GB and buy Leopard.
I'd recommend the latter suggestion.

Windows 8 to 8.1 upgrade [NEED HELP]

Hello there guys! I need a bit of help here. I've received a message about "Upgrading from W8 to W8.1". But before i can continue i need to uninstall HP Protecttools security manager? Any solutions? Because i don't want to ruin my laptop or do anything to harm it or to work slowly w/e So plase if someone could help me out <33 Thanks in advance <3

Disabling the plugin WILL help on sites and pages that have already converted videos to HTML5 (MP4) format and no longer require FlashPlayer. WIth the plugin enabled, the page will default to playing the Flash version first, and it will crash if the plugin isn't working as it should. However, disabling the plugin will cause problems on pages that HAVEN'T been converted to HTML5 yet, and there are still quite a few of them out there.
Try resetting Firefox first: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems
If that doesn't do it, THEN reinstall it.

Hey Guys, just got FCP 7 upgrade, need help with Depth in Field.

I just got the upgrade and really want to know how to use Depth in Field on video. Could anyone explain or direct me to a video tutorial. Because i bought a whole course from rippletraining.com and it doesn't show how to do this with video. Any suggestions ?

and it doesn't show how to do this with video.< </div>
Welcome to the family.
You can only use DOF with stacked 3D layers in Motion.
Be sure to try the manuals. Just open the Help system and type in your words.
bogiesan

Frustrated with upgrade - NEED HELP

I had a problem on my PowerBook PowerPC G4 when I updated to Safari 3.1.1
Safari, Mail and the Software update would no longer run.
Tried everything to no avail.
Did an archive system install back to 10.4.6
Now I am unable to update to 10.4.11
I downloaded the Installer Package and when I run it I get the prompt:
"You cannot install Mac OS X Update (PowerPC) on this volume.
This volume does not meet the requirements for this update."
What am I doing wrong?

Here's another suggestion that will help in the future:
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
7. SuperDuper! (Commercial)
8. Intego Personal Backup (Commercial)
9. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete FireWire drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

Broadband upgrade, need help with speed please

Hi all,
I recently upgraded from a very old broadband package with an old router from the 1960's to the 'upto 20meg' service, with the bloke on the phone advising we should receive about 17meg as we are close to the exchange (Worcester Park, Surrey). So when the new kit arrived the speed jumped from 2megs to about 4ish and it's now settled on about 5 after 10 days.
I've posted the stats below as i'm after some advice really because I can't make sense of it. Am I missing something here or should I be getting faster speeds?
Cheers

Hi welcometo the forum
You appear to have a stable connection however your connection speed is low for your line attenuation are you connected to the master socket ? Or an extension if you can connect to the test socket Located at the rear of the removable front plate of the master socket and recheck the hub stats and speedtest this wil eliminate any faults with your internal wiring also are you connecting the hub to your pc by wireless or ethernet cable if wireless could you try connecting by cable and again post the speed test results this will eliminate any speed losses due to wireless interference Please try these first then we can advise further
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Dreamweaver upgrade - need Help

I upgraded from Dreamweaver 8 to CS5.
My site is there. But when I go to link a file that's on my computer, I get "Dynamicall-related files could not be resolved because the site definition is not correct for this server".
What does that mean??

How do I know if static or dynamic? I'm a new dreamweaver user.
Having a hard time right now. Everything else seems to be correct?
It may be that I didn't define the Local Site setting correct. But I don't know what to change?

N73 Just upgraded need help

Hi,
I have just upgraded my software for my Nokia N73 now have V4.0726.2.0.1.
I now cant recieve any text or put my memory card back in phone. keep getting data full, please delete some data.
I dont know what to do.
Thanks

The other point, if you want to isolate a problem. Try borrow a MiniSD card from someone and put it in your phone. If it would be OK, then your card. If it wouldn't, then your phone. Try that.
C6-00 with 8GB MicroSD

HT1212 iPad Disabled after OS7 upgrade need help?

the i store said just connect to my computer and restore but there is no options to do that?
Where am i going wrong ?
Does anyone have a step by step guide for me to get me ipad working again .

Restore iPad
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%204/a7dc778fb9f410509a5 f05e27c848d46.jpg

Wish I didn't upgrade! and now I need help to figure out how to make it wor

I have a Windows XP Pro 2nd edition with IE ver 6.0.2 (but I normally use FireFox)
I've never had any trouble with iTunes until iTunes "forced" me to upgrade my iTunes applicaiton to version 6 if I wanted to "purchase" music. (note to self: Purchase music from stores it's much safer)...
I upgraded and received no error messages. Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
I have uninstalled and installed 5 different times and ways.
First uninstall was "typical" uninstall. THat didn't fix it.
Second uninstall was "typical" unistall from the Control Panel, and then I removed the folders from the "program File" folder. Still wouldn't work.
Third unintall was "typical" then I removed folders from local drive and removed all "known" registry "itune" keys. That didn't work.
Fourth uninstall was first a "repair" to itunes, and then a "typical" uninstall, then I removed folders, removed registry (does anyone know all of itunes registry keys? Maybe I am missing a few.. the only ones I know of is the "itune" reg). Then I looked through my start up menu from "msconfig" and took a look at my firewall program to see if there was anything preventing the program from running...
Fifth uninstall pretty much fruitless as my previous attempts.
I know it HAS to be a registry key of some sort.. here's why:
When I uninstall and reinstall (no matter how thourough) every time I install the iTunes program Windows XP has never ONCE recognized the new install of iTunes as a "NEW PROGRAM" and it should!
I need help... what registry keys should I be removing? ANyone suggest for me to remove Quick Time too? What about the ipod updater software? Any connection?
HELP??????????????????
THanks
W.

hi wmchisholm!
Trouble is now, when I launch the iTunes application it doesn't "open" ... although the iTunes process begins to run in the background process (ctraltdelete).
hmmm. is itunes.exe persisting in Task Manager? if so, first check up on these two possibilities:
iTunes 6 won't open on a Windows computer if firewall software is not up-to-date
iTunes for Windows doesn't open after upgrading
but if itunes.exe is disappearing after a few seconds, try the following technique:
Using MSCONFIG to troubleshoot conflicts in Windows
... and let us know the names (exact spelling please) of the start-up items that you had to disable in order to get itunes to launch. (there's a nasty piece of malware out there that has been causing "error-less" itunes launch failures since late October.)
love, b

Need help with upgrading my OS from 10.5.8

Need help with upgrading my OS. I havent upgraded the OS since I bought it and have version 10.5.8. Now I cant download Mountain Lion- or even Snow Leopard. When i downloaded the first version of SL- 10.6.1 it says i have to have 10.6 first and I cant find that.

Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple withdrew Snow Leopard from their stores, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $20 for a single user, or $30 for a family pack that covers up to 5 Macs. You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/
If you are outside the US call your national Apple Helpline:
http://support.apple.com/kb/HE57
If you're in the UK, use this number: 0871 508 4400
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
UPDATE:
OS 10.6 Snow Leopard is once again available from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
To use iCloud you have to upgrade all the way to Mountain Lion:
http://support.apple.com/kb/HT4759

When I sign in told my firefox is out of date. I did try to do upgrade but did not work, need help

I need help how to get my sign in working. Do I need to upgrade? If so I need to know how to upgrade.
Thanks for help
<sub>edit: removed personal information for your protection. (philipp)</sub>

Please see https://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible#w_firefox-is-showing-the-wrong-user-agent
If you have Firefox 25.0.1 then your useagent is stuck at the older 3.6.17 version due to the (.NET CLR 3.5.30729) that was added on end at time.
User Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.17) Gecko/20110420 Firefox/'''3.6.17''' (.NET CLR 3.5.30729)

I sign in tol my Firefox is out of date. did try to do the upgrade but did not work need help

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/978554 /questions/978554]''
I need help to get my sign in working. Need to upgrade?
how to do that?
<sub>edit: removed personal information for your protection. (philipp)</sub>

I sign in told my Firefox is out of date. did try to do the upgrade but did not work. Need help
Let me know how to get my sign in working

I need help,,upgraded to ipad2, laptop had to be restored b4 I backed up iPad or saved iTunes library. How do I back up and sync my ipad2 without losing content on my iPad.

I need help,,upgraded to ipad2, my HP laptop had major issues and had to be restored b4 I could back up and save any content on the hard disc. So i havent backed up my iPad2 or saved my iTunes library.
How do I back up and sync my ipad2 without losing content on my iPad.???
I need really simple instructions as I've had a bad run with my laptop the last month.
I have re-installed iTunes,it currently has no content in it
all my music, photos etc had been saved to a an external Hardrive (phew)so I'm not concerned about losing them during a sync, but how do I sync my Ipad without losing the applications... The last back up saved was in June when I still had an ipad1
I tried to back it up last night but kept getting the prompts something to the effect of "iPad can only be synced to 1 iTunes library, syncing will erase all content and replace with content on this iTunes library".
Help please,, I've already lost endless hours fixing my PC issues,so I'm not game to attempt this issue without guarantee I won't lose everything,need a simple solution that anyone can follow as my brain has information overload!!! Lol
Thanks

This should help you out. I copied this from another discussion a while back. Here is the original discussion link.
https://discussions.apple.com/message/11527071#11527071
This is what is in the discussion. It really doesn't get any easier than this.
1) Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
2) Now connect your iPad to your laptop and start iTunes.
3) When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases etc.
4) After it finishes transferring all your apps to your new laptop, right click on your iPad and select Backup your iPad.
5) After it finishes backing up your iPad, right click on your iPad and select Restore etc.
6) After it finishes restoring, left click on your iPad , then click on the Apps tab on top, and check the box next to Sync Apps, then click on Apply below.
If everything on your iPad looks good after the sync, go back and click on Edit / Preferences / Devices and UN-check the box next to Prevent your iPod etc. The only other thing you may want to check is if your contacts, bookmarks, etc. are syncing correctly now. If not, go to the Info tab after connecting and make sure you indicate which features you want to sync with what sources.

January upgrade, need help.

Similar Messages

Maybe you are looking for