Japan page format for legal form printing

Dear Experts,
I have an issue where I need to identify which page/spool format to be used for JP legal form printing that use 4 quadron forms.
Program name : RPCEADJ0
if spool format is X_24_80_JP, how do i know if this is 4 quadron forms format?
TQ

Hi,
Thanks for you reply.
I cannot control left and right margin in PDF. Also, it is a PDF file so eventhough somehow you are able to change left and right margin, the content does not adjust itself to fit the legal page (as it does in word or excel).
Let me know if there is any other option.
Thanks,
RS

Similar Messages

Page Format for landscape/legal paper for ALV Grid report

Hi!
I have a request to set up a particular ALV Grid report as a background job with the report output printing on legal-size paper with landscape orientation. We currently don't have any reports set up to print on legal size paper. What do I need to do to set this up? We currently use X_58_170 or X_65_255 which print on letter-size paper. I cannot seem to find a page format for landscape legal other than LEGAL which seems to be available only for SAPscript or Smart Forms. Any help will be greatly appreciated.
Best Regards,
Nik von Ruden
Edited by: Nik Von Ruden on Oct 8, 2010 1:11 AM

Hi,
Thanks for you reply.
I cannot control left and right margin in PDF. Also, it is a PDF file so eventhough somehow you are able to change left and right margin, the content does not adjust itself to fit the legal page (as it does in word or excel).
Let me know if there is any other option.
Thanks,
RS

Need to print form in DINA4 page format, but in form it is specified ANY

Hi all.
There a form which has ANY page format in its basic settings.
But I need to print this form in DINA4 page format manually.
When print the form I am getting a spool. Let me know whether I can change thus to DINA4 format and print the same in DINA4 format on printer?
Please provide inputs.
Thanks a lot.
Bala

Hi,
You can change it but you have to check the windows whiche are defined in that page can fit in the Diana4 if it does not fit you have to adjust the windows size to fit into your required page format.
Thanks,
NN.

Multiple page format for single smartforms

We have a requirement to get the output in different page formates for a smartform.
How to achieve this???

suppose you r using a program to print the smartform.
Just check this program.
REPORT z_sf_demo1 .
PARAMETERS p_bukrs LIKE ekko-bukrs.
DATA: fm_name TYPE tdsfname.
DATA: ssfctrlop LIKE ssfctrlop.
Function to get the function name to run SMART FORM.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZJAYRA_DETAIL'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To pass parameters for CONTROL_PARAMETERS
ssfctrlop-no_open = ' '.
ssfctrlop-no_close = 'X'.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = ssfctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
bukrs = p_bukrs
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To pass parameters for CONTROL_PARAMETERS
ssfctrlop-no_open = 'X'.
ssfctrlop-no_close = ''.
ssfctrlop-startpage = 'PAGE2'.
Function to run SMART FORM from third page to last page.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = ssfctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
bukrs = p_bukrs
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ssfctrlop-no_open = 'X'.
ssfctrlop-no_close = ''.
ssfctrlop-startpage = 'PAGE3'.
Function to run SMART FORM from third page to last page.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = ssfctrlop
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
bukrs = p_bukrs
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I have also sent a mail to your gmail id regarding the details of my program.
Hope your query will be solved.
<b>Rewards pioint for helpful answers.</b>
Regards,
Abhay.

SAP Vendor Master Communication Details for SMART FORM Printing.

Hi
Could you please advice Functional module to extract SAP Vendor Master Communication Details for SMART FORM Printing.
Thanks in Advance.
Regards
Ravi

Hi Ravi,
I don't know about a function module, but the vendor master table LFA1 has a field ADRNR pointing to the general address table with the fields for e.g. language and to the tables ADR2 for phone numbers, ADR3 for fax numbers and ADR6 for e-mail addresses.
BR
Raf

Page format for landscape page layout in smart forms

Hi Guys,
Please give the solution for which page format used for landscape layout used for creating smartforms.

Hi Vinayak,
Even though there are no specific page formats available for landscape layout, you can use a standard DINA4 page format and put the page as land scape layout.
This can be done in the Page's Out put Tab, there is an option Print Attributes in which you can select either Portrait format or Landscape format.
Hope this will help you.
Regards,
Ajith V

How to set Page Format in adobe form

Hi,
I am designing a simple print forn using Adobe, since printer is dotmatrix page break should be triggered longer then usual A4 size.
If I do the same thing using Smartfom I will define a page format and under output type of the smartform I will assign it, this is enough to tell the system what is the length and width of the page I am using for printing.
how can we achive this in adobe form.
Regards
Bikas

Hello,
go to your master page and change the master page/page format/size as you wish.
Otto

Page format for SAP-Script not working in 4.6C

Hi all,
I have a problem regarding check printing.
I am using SAP version 4.6C
The size of paper for check printing is
width = 231 mm
Height = 304 mm
So for this I have created a new page format with these details in SPAD.
Then I assigned this Page format to spool format and assigned that spool format to SAPWIN driver. I have assigned this page format to the SCRIPT that is used for check printing .
But when I am taking the print out for the check with new page format, the printer dont print till the end of page, it prints till the total amount on check and then stops there. So this creates an alignment problem when taking printout for multiple checks.
Please give some solution for this.
Regards,
Bharat.

I guess you are printing on dot matrix printer. If yes, try to do some physical printer settings for the dot matrix printer by following the printer manual. I guess you have to change the page size.. or set default printer settings... it may help you to solve your problem...
if not goto your device types tab in SPAD and select device types.. select your device from the list (for ex, SAPWIN) click format and goto the format that you have inserted for this device types.. double click on your format, you will see printer Indialization.. try to write code like this
set page length to 8.5 inch (=52 lines at 6 LPI)
\e\0x43\0x44
Note the above hexa decimal value can be obtained by going through the printer manual.
Close the thread once your question is answered.
Regards,
SaiRam

Error in setting up page format for Script.

Hi,
I have set up a customized page format.
I set up Page format, Format types and Device types.
I have throughly checked wit the other working formats, everthing seems right..
Page format : zmed_po - Portait
Format type : zmed_po
Error - No Printer font maintained for ZMED_PO.
Please help me out.
Cheers,
Sam

HI Sam,
For this u need to setup the printer at OS level. There u need to setup the fonts and etc.. related to the printer. I hope this is eror from OS level...
regards
reghu

Page count and total page number for multiple forms in spool

Hi,
I'm printing 5 or 6 forms in the same spool, they basically represent one big form. Hence the page numbers should continue from one form to the other, also I will need a total page count that includes all the pages from all the forms. How should I go about doing this?

I'm not certain, but if you change the the page counter mode to INC for every PAGE except the start page of the first form it may just keep counting. Normally the first page of a form is set to START, making it page 1.

Page format for 132 column dimension in smartforms

hi guys
*In smartforms what is the pageformat for 132 column paper i.e 360 * 310 mm is there any standard pageformat provided by sap or have to create a new one ,,,how to create a new pageformat.*
Edited by: ahamed13 on Jun 6, 2010 8:44 PM

Ahmed,
create the new page format in SPAD tcode. Go to the device where u want to create the page format as per the requriement.
Regards..

Page Formatting for downloaded pdf version

the document is not formatting the pages correctly - any suggestions how to control the page formatting?

Its been almost 3 years, has there been any update on this issue? We are experiencing the same issue. Our numerous customers are thinking about just using a different pdf reader that supports this standard. All workarounds we have encountered are hacks around the URL and are unacceptable for our customers.
Please respond, we would hate for Adobe to lose all of the users that our customers have.

New Discussion pages formatted for iPhone - pls!!

Anyone else agree that Apple need to get an iPhone verion of these discussion pages? Typing is horrible. Too much lag when typing. Come on Apple! Even your own website is not formatted for an iPhone.

Well the script here constantly saves what you type so the "lag" is when it is saving while typing. Happens in BeeJive or Meebo as well because processing is gonig on while typing.
Apple isn't going to make an iPhone only version because that would go against the fact they released a phone with a real browser to hit real sites instead of mobile ones. Now yes it spawned many sites to make mobile sites (and even geared to the iPhone) but if Apple were to do it, it will say to the world, look we made a real webbrowser on a phone, but we had to change our site to let it work better. Not good PR.

How can I get "script" format for signing forms and paperwork, not just printing my name?

I would like to have a "script" font available when I sign e-mail forms or create forms.

Hi mfeehley, most online editors provide a variety of fonts you can use when composing your message or signature. If the font you want to use is not included, perhaps you can create a small image (e.g., in a Word processor, then use Alt+PrintScreen to capture it to the clipboard as an image, then paste into Paintbrush and trim to a good side) and insert that into your signature instead. The mail site or form program help should explain how to insert images.

Problem in Upload of data using FBZ5 which is for cheque form printing

hi Gurus,
     I have done recording for uploading of the documents for printing of the cheques, using FBZ5 to code. now the problem is it is not picking up the items continuously one after the other and at the same time the cheques are not printing. what could be the problem and the code is given below. Please check out and let me know how to do. Like one by one document has to be generated and at the same time the cheque has to be printed.
perform bdc_dynpro      using 'SAPMFCHK'         '0750'.
perform bdc_field       using 'BDC_CURSOR'       'OPAYF-PPRIZ'.
perform bdc_field       using 'BDC_OKCODE'       '/00'.
perform bdc_field       using 'BKPF-BELNR'     CHK_TAB-BELNR.    " '2807000006'.
perform bdc_field       using 'OPAYF-BUKRS'    CHK_TAB-BUKRS.    " '1000'.
perform bdc_field       using 'BKPF-GJAHR'     CHK_TAB-GJAHR.    " '2007'.
perform bdc_field       using 'OPAYF-RZAWE'      'C'.
perform bdc_field       using 'OPAYF-PSTAP'    CHK_TAB-PSTAP.    " '1'.
perform bdc_field       using 'OPAYF-PZFOR'      'ZF110_D_SCHECK13'.
perform bdc_field       using 'OPAYF-PPRIZ'    CHK_TAB-PPRIZ.    " 'LOCL'.
perform bdc_field       using 'OPAYF-PSOFO'      'X'.
perform bdc_field       using 'OPAYF-PPRIA'      'locl'.
perform bdc_dynpro      using 'SAPMFCHK'         '0750'.
perform bdc_field       using 'BDC_CURSOR'       'BKPF-BELNR'.
perform bdc_field       using 'BDC_OKCODE'       '=DRUK'.
perform bdc_dynpro      using 'SAPMFCHK'         '0750'.
*perform bdc_field       using 'BDC_CURSOR'       'BKPF-BELNR'.
perform bdc_field       using 'BDC_OKCODE'       '=NEW'.    "'/EEND'.
**perform bdc_dynpro      using 'SAPMFCHK'         '0750'.
**perform bdc_field       using 'BDC_OKCODE'       '=DRUK'.      "'/EEND'.
**perform bdc_field       using 'BDC_CURSOR'       'BKPF-BELNR'.
Thanks
Syama

HI
I am sending the full code. now it is printing continuously, but it is not printing the check from the cheque printer, but the invoice is printed on the A4 sheet. What wuold be the problem.
report ZCHECK
       no standard page heading line-size 255.
DATA : BEGIN OF CHK_TAB OCCURS 100,
          BELNR LIKE BKPF-BELNR,
          BUKRS LIKE OPAYF-BUKRS,
          GJAHR LIKE BKPF-GJAHR,
          PSTAP LIKE OPAYF-PSTAP,
          PPRIZ LIKE OPAYF-PPRIZ,
       END OF CHK_TAB.
DATA: v_opt LIKE ctu_params,
      v_ltext1(70) TYPE c,
      v_ltext2(70) TYPE c,
      v_tabix LIKE sy-tabix.
*-- Internal Table for including the structure alsmex_tabline
DATA: BEGIN OF i_excel OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA: END OF i_excel.
      Batch input data
DATA:   bdcdata LIKE bdcdata   OCCURS 0 WITH HEADER LINE.
      messages of call transaction
DATA:   messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
PARAMETERS: p_file TYPE rlgrap-filename OBLIGATORY,
            start TYPE i OBLIGATORY, end TYPE i OBLIGATORY,
            dismode TYPE ctu_params-dismode DEFAULT 'A' OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
   EXPORTING
     program_name        = syst-repid
    DYNPRO_NUMBER       = SYST-DYNNR
    FIELD_NAME          = ' '
    STATIC              = ' '
    MASK                = ' '
    CHANGING
      file_name           = p_file
   EXCEPTIONS
     mask_too_long       = 1
     OTHERS              = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
START-OF-SELECTION.
DATA l_file TYPE string.
CLEAR l_file.
l_file = p_file.
*-- Calling the function ALSM_EXCEL_TO_INTERNAL_TABLE
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_file
      i_begin_col             = 1
      i_begin_row             = start
      i_end_col               = 50
      i_end_row               = end
    TABLES
      intern                  = i_excel
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
END-OF-SELECTION.
DATA: v_opltext(600) TYPE c,
        v_ipltext(600) TYPE c,
        v_len TYPE i,
        r_count(2) TYPE c,
        v_rowcount(2) TYPE c,
        v_screenfld(132) TYPE c,
        msg_txt(150) TYPE c.
LOOP AT i_excel.
    CASE i_excel-col.
      WHEN '0001'.
        CHK_TAB-BELNR = i_excel-value.
      WHEN '0002'.
        CHK_TAB-BUKRS = i_excel-value.
      WHEN '0003'.
        CHK_TAB-GJAHR = i_excel-value.
      WHEN '0004'.
        CHK_TAB-PSTAP = i_excel-value.
      WHEN '0005'.
        CHK_TAB-PPRIZ = i_excel-value.
ENDCASE.
    AT END OF row.
      APPEND CHK_TAB.
      CLEAR CHK_TAB.
    ENDAT.
ENDLOOP.
v_opt-dismode = dismode.
v_opt-updmode = 'S'.
LOOP AT CHK_TAB.
    CLEAR: v_tabix.
    v_tabix = sy-tabix.
perform bdc_dynpro      using 'SAPMFCHK'       '0750'.
perform bdc_field       using 'BDC_CURSOR'     'BKPF-GJAHR'.
perform bdc_field       using 'BDC_OKCODE'     '/00'.
perform bdc_field       using 'BKPF-BELNR'      CHK_TAB-BELNR.   "'2807000008'.
perform bdc_field       using 'OPAYF-BUKRS'    CHK_TAB-BUKRS.    "'1000'.
perform bdc_field       using 'BKPF-GJAHR'     CHK_TAB-GJAHR.    "'2007'.
perform bdc_field       using 'OPAYF-RZAWE'    'C'.
perform bdc_field       using 'OPAYF-PSTAP'    CHK_TAB-PSTAP.    "'1'.
perform bdc_field       using 'OPAYF-PZFOR'    'ZF110_D_SCHECK13'.
perform bdc_field       using 'OPAYF-PPRIZ'    CHK_TAB-PPRIZ.    "'locl'.
perform bdc_field       using 'OPAYF-PSOFO'    'X'.
perform bdc_field       using 'OPAYF-PPRIA'    'locl'.
perform bdc_dynpro      using 'SAPMFCHK'       '0750'.
perform bdc_field       using 'BDC_CURSOR'     'BKPF-BELNR'.
perform bdc_field       using 'BDC_OKCODE'     '=DRUK'.
**perform bdc_field       using 'BKPF-BELNR'     '2807000008'.
**perform bdc_field       using 'OPAYF-BUKRS'    '1000'.
**perform bdc_field       using 'BKPF-GJAHR'     '2007'.
**perform bdc_field       using 'OPAYF-RZAWE'    'C'.
**perform bdc_field       using 'OPAYF-PSTAP'    '1'.
**perform bdc_field       using 'OPAYF-PZFOR'    'ZF110_D_SCHECK13'.
**perform bdc_field       using 'OPAYF-PPRIZ'    'locl'.
**perform bdc_field       using 'OPAYF-PSOFO'    'X'.
**perform bdc_field       using 'OPAYF-PPRIA'    'locl'.
perform bdc_dynpro      using 'SAPMFCHK'       '0750'.
perform bdc_field       using 'BDC_OKCODE'     '/EEND'.
perform bdc_field       using 'BDC_CURSOR'     'BKPF-BELNR'.
**perform bdc_dynpro      using 'SAPMFCHK'         '0750'.
**perform bdc_field       using 'BDC_CURSOR'       'OPAYF-PPRIZ'.
**perform bdc_field       using 'BDC_OKCODE'       '/00'.
**perform bdc_field       using 'BKPF-BELNR'     CHK_TAB-BELNR.    " '2807000006'.
**perform bdc_field       using 'OPAYF-BUKRS'    CHK_TAB-BUKRS.    " '1000'.
**perform bdc_field       using 'BKPF-GJAHR'     CHK_TAB-GJAHR.    " '2007'.
**perform bdc_field       using 'OPAYF-RZAWE'      'C'.
**perform bdc_field       using 'OPAYF-PSTAP'    CHK_TAB-PSTAP.    " '1'.
**perform bdc_field       using 'OPAYF-PZFOR'      'ZF110_D_SCHECK13'.
**perform bdc_field       using 'OPAYF-PPRIZ'    CHK_TAB-PPRIZ.    " 'LOCL'.
**perform bdc_field       using 'OPAYF-PSOFO'      'X'.
**perform bdc_field       using 'OPAYF-PPRIA'      'locl'.
**perform bdc_dynpro      using 'SAPMFCHK'         '0750'.
**perform bdc_field       using 'BDC_CURSOR'       'BKPF-BELNR'.
**perform bdc_field       using 'BDC_OKCODE'       '=DRUK'.
**perform bdc_dynpro      using 'SAPMFCHK'         '0750'.
**perform bdc_field       using 'BDC_CURSOR'       'BKPF-BELNR'.
**perform bdc_field       using 'BDC_OKCODE'       '=NEW'.    "'/EEND'.
**perform bdc_dynpro      using 'SAPMFCHK'         '0750'.
**perform bdc_field       using 'BDC_OKCODE'       '=DRUK'.      "'/EEND'.
**perform bdc_field       using 'BDC_CURSOR'       'BKPF-BELNR'.
'=ENTE'. '=BU'.
CALL TRANSACTION 'FBZ5' USING bdcdata
      OPTIONS FROM v_opt MESSAGES INTO messtab.
      WRITE:/10 'ROW:' COLOR 4,v_tabix.
      LOOP AT messtab.
        CALL FUNCTION 'FORMAT_MESSAGE'
          EXPORTING
            id        = messtab-msgid
            lang      = sy-langu
            no        = messtab-msgnr
            v1        = messtab-msgv1
            v2        = messtab-msgv2
            v3        = messtab-msgv3
            v4        = messtab-msgv4
          IMPORTING
            msg       = msg_txt
          EXCEPTIONS
            not_found = 1
            OTHERS    = 2.
        IF sy-subrc <> 0.
       MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
               WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        IF messtab-msgtyp EQ 'E'.
          WRITE:/10 messtab-msgtyp,msg_txt COLOR 6.
        ELSEIF messtab-msgtyp EQ 'S'.
          WRITE:/10 messtab-msgtyp,msg_txt COLOR 5.
        ELSEIF messtab-msgtyp EQ 'W'.
          WRITE:/10 messtab-msgtyp,msg_txt COLOR 3.
        ELSE.
          WRITE:/10 messtab-msgtyp,msg_txt COLOR 4.
        ENDIF.
        CLEAR msg_txt.
      ENDLOOP.
      ULINE.
      REFRESH:bdcdata,messtab.
ENDLOOP.
*&      Form BDC_DYNPRO
      text
     -->PROGRAM    Program name
     -->DYNPRO     Screen number
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.                    "bdc_dynpro
*&      Form BDC_FIELD
      Insert batch input data
     -->FNAM       Screen Field Name
     -->FVAL       Field Value
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM.                    "BDC_FIELD
**perform bdc_transaction using 'FBZ5'.
**perform close_group.

Japan page format for legal form printing

Similar Messages

Maybe you are looking for