Japanese characters in SMARTFORMS using S010 (Standard Texts)

Hi gurus,
Im trying to print a standard texts maintained in S010 using SMARTFORMS. When i preview these texts in S010 it looks fine but when i use it in SMARTFORMS (Using include text) it gets overlapped.
Is there a length requirement/limitation for the standard texts that can be used in SMARTFORMS? Because i noticed that there is a certain length in which the Japanese characters overlapped.
Thanks in advance
Andre

Hi Chenna,
My window is wide enough to accomodate the texts. I tried adding non Japanese characters on the same row. The Japanese characters are still overlapping but the non Japan texts were displayed correctly and long.
Regards,
Andre

Similar Messages

How to use a standard text in Smartform ?

hi all...
iam want to use standard text in smartform ?
can any one tell me how to do this ?
Thanks
sandy

use function module READ_TEXT to read standard text .
Regards,
Shiva Kumar

Special Characters not being imported from standard text(SO10) to form

Hello Experts,
I have created a standard text in SO10 and tried importing it to the adobe form, i created. I have maintained some sentences as highlighted and underlined. Text got imported perfectly on to the form, but the formatting is not being exported. Could you please help me in this issue.
Thanks,
Rakesh.

Use Text modules instead of standard text

Unable to print chinese characters in Smartforms use Zebra printer

Hi,all.
My printer is Zebra ZM400 300dpi,I created a new output device 'TestDevice' and use the Lzeb3 Device type.
In my smartofrms i used the Zebra command to rotated text.Now the smartforms counld not print chinese characters but '#' instead.(style font 'ANDALE_S')
Anyone could help me....
Thanks Advance.
Andy Lee.

Hello Andy,
If you use the device type LZEBU3 with font ANDALE_S, then when you print then the SAP system
send a print control for activating the ANDALE font installed on the printer, and the text should
be outputed over this font.
When you get # during print then this means that the device type or the SAP font don't support
this character(this was the original problem), when you get a "space" then this means that the
font which is used by the printer don't support this character.
I think this can have 2 causes in your case:
1. The SAP system use the print control SF000 when you use ANDALE_S, which contains
the print control ^CI17^F8 in HEX form. This should activate the ANDALE font on your printer.
(You can find this under tr. SE73 -> Printer Fonts -> LZEBU3 -> ANDALE_S)
You should check wheter this is the correct print control. You should find on the printer an option
which list you all installed fonts, and also the print control which can be used for activating it.
Compare this print control from the printer with the above print control from the SAP system.
If you see a differnce then change the print control in the SAP system.(Before you do that please
copy the device type LZEBU3 into customer namespace, don't change the original SAP device type)
2. The font installed on the printer don't support the character which you use. Contact Zebra to confirm this, and ask for a ANDALE font which supports the character.
Best regards,
Norbert

How to use standard text?

hi experts,
i have created a standard text in so01. now i want to use it in my smartform. can anyone help me, plz give the procedure to use that standard text in my form.
thanks in advance for ur responce.

Hi
You cannot use two type to the same text .
Either you have to use TYPE as INCLUDE TEXT for standard text
or TEXT ELEMENT for normal text
One thing you can do if u want to print HI WELCOME together
Then you write both things in different text and print it .
Hope this make some sense to u.
Reward if helpful
Thanks
Krushna

How to use Standard text in SAP SCRIPTS

Hi all,
Please tell me how can we use the standard text what we have created in SO10 with sap scripts.

Hi Gaurav
You can create standard texts using the transaction SO10. Then to insert these standard texts in the SAPScript choose the menu, Insert->Text->Standard and choose the standard text that you want to choose.
Alternatively, you can display standard texts in your SAP Scripts using the command:
INCLUDE ZSTEXT OBJECT TEXT ID ST LANGUAGE EN
where ZSTEXT refers to the Standard Text name.
Reward pts if found usefull
Regards
Sathish:)

Standard Text in SO10

Hi,
Can we use the standard text in S010 for storing only text or we can values or variables also.I want to use standard text in smartform.
Rgds

Hi
I think ur question is not Related to SAP business one.
pls post in proper Forum if it is....
Giri

If condition in standard text in so10

Hi,
Im using a standard text where ive written an IF condition but its not working.Im calling that text in my program using READ_TEXT, TEXT_CONTROL_REPLACE and TEXT_SYMBOL_REPLACE function modules.Im not using sapscript or smartform.All my dynamic variables are working fine but for my IF condition what is happening is IF statement is also true and ELSEIF is also true.The statement under if is also getting printed and statement under elseif is also getting printed.
Could anyone help please.
Regards,
Nidhi.

Standard text " if conditions " dont work other than scripts and smartforms.
to my surprise, if conditions have not worked even when I used them as includes in ADOBE forms.
Please handle the conditions in your program itself.
<< Moderator message - Point begging removed >>
Edited by: Rob Burbank on Sep 30, 2011 2:49 PM

Standard text in Smart forms

Hi ,
           Im using the standard text in smart forms, but Im getting the output displayed as hexadecimal numbers. These are the hexa characters stored in the "SO10" transaction for the standard text name.
I try to display a signature stored in standard text.
But when used in SAP scripts I get the content displayed correctly.
Can someone help me to display the content in smart forms as such.
I searched the forum for the solution I got some results for the search but I did not get the solution for it.
Points will be rewarded for helpful answers...
Rgds,
Sarath.
Message was edited by:
        Sarath kumar Chandrasekharan

Rama,
The problem is the signature is in standard text.
Message was edited by:
        Sarath kumar Chandrasekharan

Difference jb/w text symblosin script and standard text in scripts

hi to all
can u pols explain about the
difference b/w text symblos in script and standard text in scripts

hi
Default paragraph Paragraph set to * in standard text maintenance
If no form has been assigned to a text, the system automatically assigns the form SYSTEM, which contains minimal definitions for text formatting. There are two ways of formatting texts using forms: Use the standard text maintenance to enter and print the text.
Any kind of text can be included in a form. If no object is specified, then TEXT will be used (standard texts).

Text Symbols
Text symbols acquire their values as a result of explicit assignment. To interactively assign text symbols, in the text editor choose Include  Symbols  Text. This method is available for all text symbols belonging to a text module as well as those of the associated form. Values defined in this way are lost when the transaction is left. If you want to print the text module again, then you must enter the symbol values again. The purpose of the DEFINE command is to provide a means of making this value assignment a permanent part of the text, so that the values are available again when the text module is called again. This command can also be used to re-assign a new value to a text symbol half-way through the text. Syntax: /: DEFINE &symbol_name& = 'value'
/: DEFINE &subject& = 'Your letter of 7/3/95' The value assigned can have a maximal length of 60 characters. It may itself contain other symbols. A symbol contained within the value assigned to another symbol is not replaced with its own value at the point at which the DEFINE command is executed. Rather, this replacement is made when the symbol defined in the DEFINE command is called in the text.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& = 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPscript If, however, the DEFINE command is written using the ':=' character rather than the '=' character, then any symbol contained within the value being assigned is replaced immediately with its current value. The assignment to the target symbol is made only after all symbols in the value string are replaced with their values. The total length of the value string may not exceed 80 characters. The target symbol must be a text symbol, as before.
/: DEFINE &symbol1& = 'mail' /: DEFINE &symbol2& := 'SAP&symbol1&' /: DEFINE &symbol1& = 'script' &symbol2& -> SAPmail
Inserting Text Symbols
Procedure
Inserting a Text Symbol
1. Choose Insert → Symbols → Text.
2. Place the cursor on the desired text symbol.
3. Choose Choose.
4. The system inserts the text symbol.
Editing the Value of a Text Symbol
1. Choose Insert → Symbols → Text.
2. Choose Edit value bearbeiten. The dialog window Value definition for symbol <text symbol> appears.
3. Enter the appropriate value definition.
4. Choose Continue. In the dialog window Text symbols the specified value appears after the name of the text symbol.
5. Choose Continue.
Deleting all Text Symbol Values
1. Choose Insert → Symbols → Text.
2. Choose Delete all values. The system deletes all defined values.
3. Choose Continue.
Using Formatting Options for Text Symbols
1. Choose Insert → Symbols → Text.
2. Choose Options. The dialog window Formatting options for <text symbol> appears.
3. Fill in the fields.
4. Choose Continue.
5. Choose Continue. The system executes the selected formatting option.
regards
ravish
plz reward points if helpful

PR to PO ...Standard text problem

Hi all,
I am writing one report , which converts the purchasing requistion to purchase order. I am using the BAPI function module...BAPI_PO_CREATE1.
In this i want to populate the purchase order header text. I am using the standard text for all po's whose are convertable.
but the problem is , the header text table paramers(POTEXTHEADER) in BAPI FM will take 132 chars only. But my standard text is 6 paragraphs are there . how do i long text populate? Am i using the wrong parameters in the BAPI FM.
please suggest me ...how to use this BAPI FM , to populate the lonf standard text.
regards,
Ajay Reddy
Edited by: Ajay on May 27, 2008 9:08 AM

hi
use the function module create_text to upload long text. below is the
sample program which uploads purchase order text more than 132 characters.
TABLES : MARA, TLINE, THEAD.
DATA: BEGIN OF ITAB OCCURS 0,
 MATNR LIKE MARA-MATNR, " MATERIAL NUMBER
 TEXT(5000) TYPE C, " Long Text
 END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0,
 MATNR LIKE MARA-MATNR, " Material No
 SEQU TYPE I, " Text Sequence
 TEXT(5000) TYPE C, " Long Text
 END OF ITAB1.
DATA:BEGIN OF DT_LINES OCCURS 0.
 INCLUDE STRUCTURE TLINE. " Long Text
DATA:END OF DT_LINES.
DATA : P_FILE1 TYPE STRING.
DATA : DL_NAME TYPE THEAD-TDNAME, " Object Name(material no)
 DL_LAN TYPE THEAD-TDSPRAS. " Language
CONSTANTS:C_BEST TYPE THEAD-TDID VALUE 'BEST',
 C_MATERIAL TYPE THEAD-TDOBJECT VALUE 'MATERIAL'. " OBJECT
DATA: START TYPE I,
 LEN TYPE I VALUE 92,
 TOTLEN TYPE I,
 N TYPE I.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-101.
PARAMETERS P_FILE LIKE RLGRAP-FILENAME."input file
SELECTION-SCREEN : END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
PERFORM FETCH_FILE USING P_FILE.
*& Form fetch_file
 text
 -->P_FILE text
FORM FETCH_FILE USING P_FILE.
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 PROGRAM_NAME = SYST-CPROG
 DYNPRO_NUMBER = SYST-DYNNR
 IMPORTING
 FILE_NAME = P_FILE.
ENDFORM. "fetch_file
START-OF-SELECTION.
PERFORM UPLOAD USING P_FILE. " *To Upload Flat file
PERFORM UPLOAD_TEXT.
*& Form UPLOAD
 text
 -->P_FILE text
FORM UPLOAD USING P_FILE.
P_FILE1 = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 FILENAME = P_FILE1
 FILETYPE = 'DAT'
HAS_FIELD_SEPARATOR = ' '
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
 TABLES
 DATA_TAB = ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC EQ 0.
*message i001 with p_file .
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "UPLOAD
*& Form UPLOAD_TEXT
 text
FORM UPLOAD_TEXT.
LOOP AT ITAB.
 ITAB1-MATNR = ITAB-MATNR.
 CLEAR: TOTLEN,N, START.
 TOTLEN = STRLEN( ITAB-TEXT ).
 N = TOTLEN / LEN.
 N = N + 1.
 DO N TIMES.
 ITAB1-TEXT = ITAB-TEXT+START(LEN).
 ITAB1-SEQU = SY-INDEX.
 START = START + LEN.
 APPEND ITAB1.
 ENDDO.
ENDLOOP.
DELETE ITAB1 WHERE TEXT IS INITIAL.
SORT ITAB1 BY MATNR SEQU.
LOOP AT ITAB1.
 DT_LINES-TDFORMAT = '*'.
 DT_LINES-TDLINE = ITAB1-TEXT.
 APPEND DT_LINES.
 AT END OF MATNR.
 DL_LAN = SY-LANGU.
 WRITE : / itab-MATNR.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 INPUT = ITAB1-MATNR
 IMPORTING
 OUTPUT = ITAB1-MATNR.
 MOVE ITAB1-MATNR TO DL_NAME.
 CALL FUNCTION 'CREATE_TEXT'
 EXPORTING
 FID = C_BEST
 FLANGUAGE = DL_LAN
 FNAME = DL_NAME
 FOBJECT = C_MATERIAL
 SAVE_DIRECT = 'X'
 FFORMAT = '*'
 TABLES
 FLINES = DT_LINES
 EXCEPTIONS
 NO_INIT = 1
 NO_SAVE = 2
 OTHERS = 3.
 IF SY-SUBRC <> 0.
 WRITE:/10 'Long Text Creation failed for Material No', ITAB1-MATNR.
 ELSE.
 WRITE:/10 'Long Text Created Successfully for Material No', ITAB1-MATNR.
 ENDIF.
 REFRESH DT_LINES.
 ENDAT.
ENDLOOP.
ENDFORM. "UPLOAD_TEXT

Standard Text Key printing on Job Ticket Shop Paper

Hi,
I have set up using transaction CA10 a series of Standard Text Keys containing approx 500 characters.
I am using the Standard Text Key on a Service Order but when I am printing the Service Order the first 40 characters are only being printed.
We have a requirement to print out on the Service Order the Standard Text Key and all of the text and not the first 40 characters.

Hello,
One suggestion would be to have a programmer check the SAPScript form that calls the standard text to make sure the formatting is not restricting the length of the text that is being printed.
Regards,
Paul

Problem printing Special Characters in Smartform

Hi,
I am developing a Smartform for Position Description. For that I have to display data from table HRT1002 as the data in this table is stored using Text Editor the data internally is stored in '#' when there is a enter, space or some special Characters. While displaying this data I have used class CL_ABAP_CHAR_UTILITIES -->HORIZONTAL_TAB to make '#' to it original value in my internal table.
After using the Class the data has been converted into the correct format, but while printing few special characters like ", ' , .. etc are been printed as # where as in my internal table they are not in # format. How can I change the # to it original Character while printing.
Regards,
Ramu N.

In Text Element,click Txt editor icon on the left side in General attributes.Then in the menu Include->Characters->Displayable Characters and then select the characters.
To display Special characters in Smartforms ...
goto text editor of the perticular text node.
in the text editor, Click INSERT - Characters - Displayable Characters.
a new window will open showing all characters...if ur required character is not
present, click on non-dispalyble character button , it displays all the characters
and their respective numbers...select ur required character .
Check it, if it is helpfull reward points..
Regards....
ABhay

Defaulting Standard Text into Vendor Text

Hello,
We have been asked if we can add functionality similar to the S010 standard texts in R/3, so that a SRM user can select from a list of standard texts. The text would default into the Vendor Text on the Shopping Cart, the user would be able to amend the text if required.
Does anyone know if this is achievable? I assume it would have to be done via a BADI?
Thank you.
Kind Regards,
Jackie Jones

Hello Jackie,
Use text schema to achieve your request: you can define fixed values for texts.
In SRM 7.0 release, it is in IMG:
SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Text Schema
I think path is the same for lower releases.
If you use fixed values, this means vendor text coming from your catalog has to make part of your fixed values.
Regards.
Laurent.

How to decrease the font size of standard text

Hi Friends,
I have been using a standard text(created in SO10) in my smartform. The window size is less than the space reqd for the standard text. So I thought of decreasing the font size. Could any one help me to find the solution to decrease the font size. Please let me know if there is any other solution for this..
I would reward highly for the appropriate solutions....
Thanks and regards,
Ramineni.

hi,
i had the same problem,i tried to reduce font size from so10 but it was too small,so resized the window itself.

Japanese characters in SMARTFORMS using S010 (Standard Texts)

Similar Messages

Maybe you are looking for