Japanese font in a Flash file

is there anyway of outlining a font in a Flash??? My work around was to copy and paste between Flash and Illustrator replacing the Japanese text with vector elements, in order to meet the vendors spec's. There has to be an easier way of doing this......any ideas appreciated

I don't know, I always suppress the html output since the
html it generates isn't W3C-valid in any context I'm designing. I
use swfobject for my flash files -- thanks for the idea, though!
Does it enumerate all URLs that are embedded in a flash file's
actionscript? That seems like it can get rather data-heavy?

Similar Messages

  • How to display Japanese fonts in a .txt file i received?

    I received an email attachment that is a .txt file.
    Some of it is in Japanese and some is in English.
    The Japanese text turns out to look like gibberish.... like this...
    Media Start Media End Duration Log Note
    01:17:12;18 01:17:20;26 00:00:08;09 DZÇÍÇÁÇÃÉCÉìÉåÉbÉgÇÇøÇÂÇ¡Ç∆âÒǡǃÇ≥ÅAÇ¢ÇÎÇÒÇ»É]Å[ÉìÇ÷ǢǡǃǛǃÇsÇÖÇíÇíÇÅÇâÇéÇ ÷LJǡÇ∆ãflÇ≠çsǡǃÇ≥ÅAÉwÉäÇÃñ≥ë éûä‘Çè≠Ç»Ç≠Ç∑ÇÈÅB
    01:17:25;21 01:17:30;21 00:00:05;01 â¥ÇÁÇ©ÇÁ3ÉÅÅ[É^Å[ÇÃÇ∆DZÇÎÇ≈äCÇ™ÉAÉâÉCÉîDžǻǡÇΩÇÊÅI
    01:17:32;10 01:17:36;20 00:00:04;11 ÉwÉäǙdžÇÈÅBëDǙdžÇÈÅBå„âΩÇ™ó~ǵǢÅH
    If i send this cut/paste back to the person who emailed it to me, they say it is displaying fine in Japanese.
    I have no idea how to make this text show up in Japanese.
    Thanks for any help.
    Brian

    You might try giving the file a ".txt" extension. Then drag it on top of your Safari icon in the dock, which should open it with Safari. Then, under "View", select a Japanese "Text Encoding". My guess is that this is Shift-JIS.
    I am assuming you have not removed Japanese fonts from your system.

  • Default Japanese font setting in Linux

    Hi,
    I'm using flashplayer in Debian/Ubuntu, and default Japanese font setting in flash is kind of crap...
      It seems that Kochi font should be installed.  Kochi (東風) font is very old and it is not used so much
    as 10 years ago Now Linux users use VLGothic or IPAGothic as Japanese font by default.
    My question is,
      - How users can change default font setting?
      - Where/who is the contact address for this issiue?
    #I'm also maintainer for most of Japanese font packages in Debian/Ubuntu. In my opinion, Kochi
       should be dropped in near future (see package description)

    If you don't hear anything about this issue within a few days, please send a PM to http://forums.adobe.com/people/libflashplayer.so and/or http://forums.adobe.com/people/chris.campbell with a link to this topic.
    P.S. Hello from another Tokyo resident

  • Can I embed fonts of all Dynamic Text objects in a Flash file?

    Hi there!
    I'm fairly new to Flash, so please bear with me.
    I have created a Flash file which will act as our company's standard presentation / portfolio of all previous projects.  I've pretty much got it running the way I want, but I've just tried it on a few different computers and realised that the fonts aren't embedded.  I've used our corporate font so it needs to look right.  Having read the following documentation (http://livedocs.adobe.com/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Liv eDocs_Parts&file=00000893.html) I now understand how to embed fonts for one dynamic text object at a time.  However, I have a lot of different dynamic text objects in the file and I would dearly love to embed them all in one step!  The same embedding options can be applied to just about all objects, as they're all the same size and font.
    I hope someone can help me.  If you are able to help please spell things out in simple steps!!  I am aware that I probably haven't yet grasped a number of the basics of Flash.
    Thanks in advance,
    Stuart

    Static text doesn't need to be embeded. So I'm not sure what the problem you are having is. The page you linked to is for making an embedded font in your library that can then be exported for actionscript and used by code and style sheets. If you are following the instructions on the page you liked to you only need to do that once. Which shouldn't be too hard.
    That is usually a different problem that having a bunch of different authortime created textfields that need to have characters embedded.
    As far as I know your only hope to change a bunch of authortime/library items is using JSFL. So even if the thing I pointed to isn't exactly what you need you could keep googling a bit or use that as a template.
    JSFL files are just text files so open it in note pad. Look for the line:
    if(it[i].itemType == "movie clip")
    and change it to this:
    if(it[i].itemType == "movie clip" || it[i].itemType=="button")
    Now it does buttons. You give up too easy.

  • Japanese fonts appear larger in Flash Player  10.0.42.34

    Hi
    We're experiencing a strange problem in a flash swf object embedded on an aspx page in a .net web application.
    Environment :
    Adobe Flash Player  :  10.0.42.34
    Browesers : IE 6 , 7  Firefox 3.5
    Client machine configuration :
         Windows XP SP3
         East Asian Language Pack installed.
         Flash player version 10.0.42.34 installed.
    We're displaying Japanese text on the page through the flash player.
    What happens is that randomly on some client machines the Japanese fonts appear too large in size while on others
    they appear perfectly fine.
    We also have English , Honkkong and Chinese  versions of the page ..all of which work perfectly fine across all client machines.
    The issue is only with the Japanese version.
    Any pointers on this guys .... ?
    Please help !!!!
    Thanks

    Sure , here is the url :
    http://www.forevermark.com/ja-jp/The-World-of-Forevermark-/Precious-Collection/
    On some machines , the Japanese text in the centre section appears very large. ..( see attached snapshot)
    We initially encountered this on the version prior to the 10.0.42.34 version.
    However even after the upgrading to 10.0.42.34 , the problem still persists .
    Thanks

  • Embedfont = true; Japanese font is not working in Flash CC

    Hi,
    embedfont = true; was working in Flash CS6 (window XP, 32bit, Air SDK 15.0)
    But I moved same project to new system. Then, it's not working. (Flash CC, window 7 pro, 64bit, SDK 17.0).
    textfield shows nothing. But if I remove this code (embedfont = true;). Textfield shows texts applied default fonts.
    Funny part is English and Korean(My language) Embedfont is working perfectly.
    Only japanese font is not working.
    I've tried several japanese font, but all of them were not working.
    Any Idea would be appreciate.

    Amy~ Yep the lasso tool was what I verified with another user. 'L' seems to be bound indefinitely to loop through different types of lasso tools and it was annoying them because they just wanted L to be the regular freehand lasso. I removed 'L' from being an option on the polygon lasso and even set it explicitly to SHIFT+L as well as set the lasso tool to a completely different keyboard combo. 'L' still cycled through lassos haha. It needs some fixes.
    fertolg~ At least you have a workaround for now. I'd go nuts if I couldn't use keyboard text selection writing code, oy! You're welcome and if you're all set please mark correct so we can filter unanswered. Good luck!

  • Broken Korean and Japanese fonts on music files.

    I get broken Korean and Japanese fonts on music files.
    It shows up broken as a file and on itunes when I play it.
    How can I have this fixed?
    I have 3 other laptops that are not Mac and on those laptops it shows up just fine.
    Tried adding a language pack or something still doesn't work.
    Its been like this when I purchased it.

    I get broken Korean and Japanese fonts on music files.
    It shows up broken as a file and on itunes when I play it.
    How can I have this fixed?
    I have 3 other laptops that are not Mac and on those laptops it shows up just fine.
    Tried adding a language pack or something still doesn't work.
    Its been like this when I purchased it.

  • How do i link a flash file to a web site in dreamweaver 8

    This is a multi-part message in MIME format.
    ------=_NextPart_000_0059_01C7A541.7942B2A0
    Content-Type: text/plain;
    charset="iso-8859-1"
    Content-Transfer-Encoding: quoted-printable
    Hi
    How do i link a flash file to a web site in dreamweaver 8
    Thanks
    ------=_NextPart_000_0059_01C7A541.7942B2A0
    Content-Type: text/html;
    charset="iso-8859-1"
    Content-Transfer-Encoding: quoted-printable
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
    Transitional//EN">
    <HTML><HEAD>
    <META http-equiv=3DContent-Type content=3D"text/html; =
    charset=3Diso-8859-1">
    <META content=3D"MSHTML 6.00.6000.16448"
    name=3DGENERATOR>
    <STYLE></STYLE>
    </HEAD>
    <BODY bgColor=3D#ffffff>
    <DIV><FONT face=3DArial
    size=3D2>Hi</FONT><FONT face=3DArial =
    size=3D2></FONT></DIV>
    <DIV><FONT size=3D1>
    <P><FONT size=3D3>How do i link a flash file to a
    web site in =
    dreamweaver=20
    8</FONT></P>
    <P> </P>
    <P><FONT face=3DArial =
    size=3D2>Thanks</FONT></P></FONT></DIV></BODY></HTML>
    ------=_NextPart_000_0059_01C7A541.7942B2A0--

    In Flash. There is no way to apply an HTML link to a swf
    file.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Dave" <[email protected]> wrote in message
    news:f3s8f0$cla$[email protected]..
    Hi
    How do i link a flash file to a web site in dreamweaver 8
    Thanks

  • Crystal Reports 2008 export to PDF does not render Japanese fonts

    Hello,
    I have searched the forums for this issue, and there does not seem to be a clear resolution to this problem.  We are using CR2008 to create RPT files that are bundled with our custom .NET 2005 application, which then generates reports in PDF format by running the RPT files against an access mdb database using the CR2008 runtime (our application is deployed on a different machine than the one that is used to create the RPT files).  The issue we are having occurs when data in the access mdb file contains Strings with Japanese characters.  The system that our application is running on does contain the eastern asian language fonts so if a user opens the mdb file using access, they can see the Unicode strings in the database rendered properly (rather than the usual boxes and garbage).  However, once our application generates the report filling in the rpt file with data from the mdb and exporting the report to pdf format, the entries that should contain Japanese font data, which leads me to believe the problem is in the export pdf function of the crystal reports 2008 runtime.  Is there anyway we can configure the runtime to properly embed the fonts in the PDF so that the users can view the Japanese content from the database.  Our users end up viewing reports on both OSX and Windows using Adobe Acrobat Reader.
    Thank you very much in advance

    Thanks for the quick reply!
    1) Exact version of Crystal Reports. (Open Crystal Developer. Go to Help> About Crystal Reports).
    12.0.0.683
    Type: Full
    2) What happens if you export the report to PDF format from the standalone Crystal Reports Designer?
    Same result.  The entry shows up as giberish in the report designer preview...however, by doing this I stumbled upon something.  See below
    3) Are you able to export the report to other formats without any issue?
    See Note below
    NOTE:
    In another part of the report, I just put the fields in question directly in the report (that is, not embedded in a text object).  That part of the report when run produces the correct non-gibberish, properly rendered Japanese result (in the CR designer preview).  The same field, however, when embedded in a text object, results in the gibberish being shown in the designer preview as well.
    Now when I export this to PDF, that ends up turning both areas into the incorrect, gibberish result.  Both the one that did properly render in the preview (field not embedded in text object) and the one in the text object.
    Exporting to any other format (tried xls, rtf and html) results in correct rendering for the field not embedded in the text object and incorrect rendering for the field embedded in a text object.
    Hope this helps with the problem, and I think it means this thread probably still belongs under this current forum.
    Cheers

  • Files (fonts) appear as Unix files when viewing on an SMB share

    We have a UNIX server running Linux which our Mac users are connecting via SMB.  We moved our company fonts to this server from an OSX Server.  All of our machines are running 10.6.6 or later.  Very intermittantly without any rhyne or reason some users when they mount the Font share, the Fonts show up as Unix files rather than the Fonts.  On my machine (10.7) they all appear normally.  Now I know that SMB was revamped in Lion so this may be the reason I can see them no problem.  But the 10.6 machines, any suggestions on fixing this?

    Any solution on this issue? I have nearly the same exact issue in my environment, but is reversed.
    The problem we have is when saving files to the server from the Snow Leopard machine, the older Tiger machines see the fonts as unix executable files. The snow leopard machine sees the files fine and can open everything with no problem.
    This only happens when saving to a SMB server, as I can save the files from Snow Leopard to a flash drive and open on Tiger with no problems. Additionaly files saved from Tiger to the server are perfectly fine when accessing from Tiger or Snow Leopard.
    We're running Windows 2008 Server and connecting via the macs using the SMB method. Also duplicated the issue on a Windows 2003 Server.

  • How do I change the size and pics in this Flash file?

    I need help with the zipped flash file that I have for
    download
    here...
    1 - I only need to use 6 images, how do I get rid of the
    rest?
    2 - How do I actually change out the images with the ones I
    want?
    3 - I need to have this file publish CLEARLY (meaning not
    grainy) at 350x272, how to do this?
    Thanks for anyone's help!!
    Please feel free to email me
    here!

    So i've went to both links. After I place this:
    iweb2 navbar is rendered by javascript widget, therefore you can change navbar font style with javascript; this is an efficient way to change navbar font style.
    Copy and paste the following into your pages using HTML Snippet:
    <script type = 'text/javascript'>
    function changeNavbar() {
    navCSS = parent.document.getElementById('widget0-navbar');
    navCSS.style.fontSize = '0.75em'; // font size, change to less than 1em to change font smaller;
    navCSSbg = parent.document.getElementById('widget0-bg');
    navCSSbg.style.textAlign = 'center'; // navbar list alignment;
    clearInterval(chkNavbar);
    chkNavbar = setInterval('changeNavbar()', 500);
    note: You won't see the changes in iweb, but you will see the change when view the pages online - after publishing.
    into a HTML snippit, what do I do? I just see a box full of coding.

  • Font Bug in Flash...fonts reverting to system default

    Maybe I am doing something stupid...you never know.
    I typically use a shared lib to embed, then link fonts. I
    have SEVERAL flash files that have suddenly started to do this.
    Fonts that ARE embedded and ARE linked to shared lib swf...suddenly
    stop working and I get a font in parenthesis (which I named and
    embedded) with 'System Default" Even when I re-embed and TRY to
    re-select the new font, it keeps reverting the the bad system
    default.
    If I open a NEW text box it will let me use the RE-embeded
    font. If I try to change the font that won't release it self from
    the "system default" version...it will let me...
    But all the fonts that are in the file already have suddenly
    changed themselves. I was cutting and pasting buttons into other
    files using the same linkages, and everytime I pasted the button
    into a new file, the font automatically changed itself the the
    system default.
    I tried everything I know. I turned on the preferences to
    warn me if a font is missing...and cutting and pasting these
    buttons into a new file (that somehow won't recognize the correct
    font)...THE WARNING is not triggered...though the font will turn
    into a system font...
    I am at a loss..and there is NO WAY to repair this in my
    files without re-creating them all over again fonts., which is
    quite impossible.

    I know this is an old post, but I have a big problem like this.
    I have my web page built in CS3, I used Anna font in static text. I used this font well, no problems. Now I am with CS4, and Flash can read the font well... inside Flash (editor, not player), it shows it in italics (this fonts doesn't have italics), and there is no way to use in regular. If I turn to another font and then, turn back to Anna, neither. And sometimes, automatically turn to Times or another. BUT... sometimes (I don't know how), Flash reads the font. But the static text that doesn't work will never work. And the other yes... AND I CAN MIX BOTH TEXTS IN THE SAME MOVIE! They have exactly the same attributes, but one is working and the other isn't. You can see it in this capture (note that Anna only has Regular Style)
    You can see the page working in http://www.mariomey.com.ar and the now exported with CS4 in http://www.mariomey.com.ar/main2.swf (look all the fonts, it looks the same in Flash editor).
    Anybody...?

  • Problem with Acrobat 8.12 keeps trying to install Japanese Font Pack

    I have a client who received a pdf file and when she opened it she was told that it needed the Japanese Font Pack. I gave her admin rights but it still keeps doing it. My pc with the same setup works perfectly fine with the offending file. Now everytime she opens any PDF it tries to open the offending file first and load the font pack. I was able to go into the registry and remove the keys that mention the file and Acrobat works fine as long as we do not try and open that file again. We have installed the font pack separately. The offending file opens fine in Reader. Any idea why this would keep happening and if there is a solution to stop it from happening. Thank you.

    Actually, since I started getting the security warning, I haven't tried it on another machine. You think this information might be only stored on my machine? It's worth trying... Thanks!

  • HTML link to a Flash file frame

    > This message is in MIME format. Since your mail reader
    does not understand
    this format, some or all of this message may not be legible.
    --B_3299492325_1333456
    Content-type: text/plain;
    charset="US-ASCII"
    Content-transfer-encoding: 7bit
    Hi
    I've got a client who has a HTML site on a laptop for a
    presentation and
    within this site he's wants a link that attaches to a AS2
    .swf that I've
    developed.
    The thing is it he wants it to link to specific area of the
    file and not to
    play it all. How would I do this as he's just asked for the
    specific address
    of the area it needs to jump to.
    Any help would be much appreciated bearing in mind my
    ActionScript is pure
    novice so a step by step would be handy.
    thanks
    --B_3299492325_1333456
    Content-type: text/html;
    charset="US-ASCII"
    Content-transfer-encoding: quoted-printable
    <HTML>
    <HEAD>
    <TITLE>HTML link to a Flash file frame</TITLE>
    </HEAD>
    <BODY>
    <FONT FACE=3D"Calibri, Verdana, Helvetica,
    Arial"><SPAN STYLE=3D'font-size:11pt=
    '>Hi<BR>
    I've got a client who has a HTML site on a laptop for a
    presentation and wi=
    thin this site he's wants a link that attaches to a AS2 .swf
    that I've devel=
    oped.<BR>
    <BR>
    The thing is it he wants it to link to specific area of the
    file and not to=
    play it all. How would I do this as he's just asked for the
    specific addres=
    s of the area it needs to jump to.<BR>
    <BR>
    Any help would be much appreciated bearing in mind my
    ActionScript is pure =
    novice so a step by step would be handy.<BR>
    <BR>
    thanks</SPAN></FONT>
    </BODY>
    </HTML>
    --B_3299492325_1333456--

    What do you mean about opening a flash file? Do you want the
    .fla file
    to open in flash? Or is it a swf that you imported into
    Director? Or
    is it an exe that was published from flash? Or a website that
    was
    created with Flash?
    If you are opening a .exe and you know the path to it, then
    you can use
    Director's built-in open command
    open the moviePath&"flashFile.exe"
    for most other things, I would use BuddyAPI. To open an exe,
    baRunProgram(). To open a fla or swf, baOpenFile.
    To make Director open a swf on the stage, import it and
    simply tell the
    button to go to that frame.

  • [SOLVED] Cannot get japanese fonts working in console

    First time with Arch. Did a clean install yesturday with Plasma as my choice of GUI.
    I have everything work, except for getting Japanese font support in consoles.
    First, fonts worked inside Dolphin, but looked terrible. So I added the infinality repos and installed infinality-bundle, infinality-bundle-multilib, ibfonts-meta-base, and ibfonts-meta-extended.
    This was probably overkill, but fonts look perfect in both my file manager and applications, but still no support in console, konsole, uxterm, or yakuake terminals.
    Then I made sure both "en_US.UTF-8" and "ja_JP.UT8" inside of /etc/locale.gen were uncommended and then ran "locale-gen" as root to generate the locales. After a reboot the fonts still wont work, the appear as ? in console.
    Any help would be greatly appreciated.
    Last edited by lolihunter (2015-05-08 16:51:07)

    After a lot of messing around, I finally got it to work.
    Not only did "en_US.UTF-8" and "ja_JP.UT8" need to uncommented, but also "en_US.ISO-8859-1" and "ja_JP.EUC-JP".
    Running "sudo locale-gen" then returned:
    Generating locales...
      en_US.UTF-8... done
      en_US.ISO-8859-1... done
      ja_JP.EUC-JP... done
      ja_JP.UTF-8... done
    Generation complete.
    As expected. Oddly enough, the output of "locale" has not changed at all, but now japanese fonts show up correctly in shell and terminals, even without a reboot!

Maybe you are looking for