Japanese Input on a Blackberry in Germany

We got a 8707v working with Romaji input in the UK. But the same package did not work in Germany or France on devices there.
We are with Vodafone. We deleted the vendor.xml before install but still not able to get this working. Chinese and Korean work fine.
What is it in the Device.xml or CJK.alx files or elsewhere that might make this firmware UK specific or prevent the Romaji methiod from working? All the .cod files referenced in the Romaji method section of the CJK.alx have loaded on the device and I gave them all full permissions. I choose Japanese input on the device but it does not work.
net_rim_tid_AWnnJapanese.cod
JapaneseOptions.cod
net_rim_tid_dynamic_transcoding_data_Shift_JIS.cod
net_rim_tid_dynamic_transcoding_data_EUC_JP.cod
net_rim_font_japanese.cod
net_rim_runtime_resource__ja.cod
net_rim_bb_resource__ja.cod
net_rim_bb_diagnostic_resource__ja.cod
net_rim_wlan_bb_resource__ja.cod
net_rim_wlan_runtime_resource__ja.cod
I have tried firmware from all over the latest was: Software For BlackBerry 8707v (TM) BlackBerry Handheld Software v4.2.2.342 (Chinese)

Hi,
We use at our firm 8707V and I downloaded the same firmware for Japanese Character Support.
We also have offices across in European town such as Frankfurt and Paris.
We did try number of devices to achive the Japanese Character Support, however none from European 8707 devices works.
What we found is that 8707 model with only QWERTY model works with the firmware but not with any other K/B such one you can obtain in German and France.

Similar Messages

How to install Japanese input method on my 8820

Hi everyone.I just bought an 8820 and I wanna install the Japanese input modules on it.
However, after installing the 4.5 East Asian version of the ROM, there's no Japanese input selection.
is it possible that the 8820 could install the Japanese input modules?

1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
Now, with loader.exe running, do you see the additional options for the launguages?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to get Chinese and Japanese input in X11?

I have tried a few things like building UIM, Canna, and Anthy, but nothing seems to work. For one thing, I seem able to compile and install the Canna library, but when I run ./configure for UIM, it can't find Canna.
Can somebody walk me through getting Chinese and Japanese input in X11?

It would probably be good to ask this in the Unix forum:
http://discussions.apple.com/forum.jspa?forumID=735
What apps are you trying to use?
For what it's worth, it recently came up on the Chinese-Mac mailing list:
http://groups.google.com/group/chinesemac/browse_thread/thread/19d00bd8cc3b1d88

[SOLVED] Japanese Input in Terminal? (urxvt)

I'm using uim+anthy and after a quick "space+shift" I can type
Japanese anywhere just fine-- except in my terminal (rxvt-unicode-256color--
Japanese characters are displayed properly by the way)
My ~Xdefaults:
*antialias: true
*hinting: true
*hintstyle: hintfull
Xft.dpi: 96
Xft.antialias: true
Xft.rgba: rgb
Xft.hinting: true
Xft.hintstyle: hintfull
URxvt.perl-ext-common: default,tabbed
URxvt.title: makutsu
## borderless and no scrollbar
URxvt*scrollBar_right: false
URxvt*scrollBar: false
URxvt*borderLess: false
## transparency
URxvt*inheritPixmap: true
URxvt*tintColor: white
URxvt*shading: 40
URxvt.font: xft:Takao:pixelsize=12
*background: #000000
*foreground: #FFFFFF
!black
*color0 : #222222
*color8 : #454545
!red
*color1 : #B22222
*color9 : #FA8072
!green
*color2 : #556B2F
*color10: #9ACD32
!yellow
*color3 : #B8860B
*color11: #DAA520
!blue
*color4 : #4682B4
*color12: #6495ED
!magenta
*color5 : #9932CC
*color13: #DA70D6
!cyan
*color6 : #87CEEB
*color14: #B0E0E6
!white
*color7 : #C0C0C0
*color15: #FFFFFF
and in my ~xinitrc:
nitrogen --restore &
cairo-compmgr &
export XMODIFIERS='@im=uim'
export LC_CTYPE=ja_JP.utf8
export GTK_IM_MODULE="uim"
export QT_IM_MODULE="uim"
LANG=zh_CN.utf8 conky &
exec ck-launch-session openbox
[Japanese is working just fine even without the "exports"
but I observed that with "export LC_CTYPE=ja_JP.utf8" the
Japanese characters get antialiased]
My fonts.conf:
<?xml version='1.0'?>
<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
<fontconfig>
<match target="font" >
<edit mode="assign" name="rgba" >
<const>rgb</const>
</edit>
</match>
<match target="font" >
<edit mode="assign" name="hinting" >
<bool>true</bool>
</edit>
</match>
<match target="font" >
<edit mode="assign" name="hintstyle" >
<const>hintslight</const>
</edit>
</match>
<match target="font" >
<edit mode="assign" name="antialias" >
<bool>true</bool>
</edit>
</match>
</fontconfig>
Not sure if it is relevant but I noticed that when I try to do "space+shift"
within the terminal it will only react to the space key--
Last edited by tabelle (2010-07-14 17:44:00)

cthon wrote:
From what I recall, running uim-xim in the background significantly slows down urxvt and xterm startup. I recommend running:
% uim-fep
at the beginning of your terminal session. This enables Japanese input only in the current terminal window. I haven't used uim-xim in years.
I had that problem with scim and setting imFont fixed it
I have this in my .Xdefaults
urxvt*imFont: -*-song ti-*-*-*-*-*-*-*-*-*-*-*-*
EDIT: I have it set up for chinese, so maybe song ti does not work for you
Last edited by xenofungus (2010-09-09 20:01:03)

[SOLVED] Japanese Input using IBus/Mozc

Good day,
Recently, I finally managed to install Arch (phew!)
As the title suggests, I need to frequently use Japanese Input. I've tried Anthy, however, the prediction is bad and the dictionaries are lacking.
Then I've found mozc (successfully utilized on Mint and Manjaro before) along with IBus , which worked really great!
Running mozc successfully on Arch has been a series of unsuccessful attempts so far. I have browsed tons of pages about people having similar problems, none of the given solutions seem to work for me.
This is what I've done so far:
1. After installation of Arch, I installed Cinnamon and GDM.
2. I've followed IBus installation page. Installed ibus + ibus-qt packages, then installed mozc through yaourt.
3. Put the lines below to ~/.xprofile (Note: .xprofile didn't exist in the first place, so I created it).
export GTK_IM_MODULE=ibus
export XMODIFIERS=@im=ibus
export QT_IM_MODULE=ibus
ibus-daemon -drx
and in ~/.bashrc
ibus-daemon -drx
5. Ran qtconfig-qt4, under the "Interface" tab, set ibus as default.
6. In /usr/bin/skype, I put the line below.
export XMODIFIERS=@im=ibus
7. Installed a set of Japanese fonts.
8. Finally, added the Japanese input -> mozc to my IBus input methods.
At this point, Japanese input is supposed to work after a relog. I decided to reboot, though, just for safety.
Yes, IBus did autostart. The tray icon would soon disappear for no reason. After restarting Cinnamon, it would magically re-appear and work with inputs like English/Polish properly. Japanese, too, albeit, not with the desired results.
First of all, the typed text in Japanese will not appear unless I press enter in applications like Firefox, Leafpad, LibreOffice. That is not the desired behavior of a Japanese Input Method Editor. Back on Mint/Manjaro the text would appear instantly, that's how it's supposed to behave.
I use Skype extensively, and the Japanese input doesn't seem to work there at all, even after putting the export line into /usr/bin/skype.
I was hoping somebody here would be able to help me. Thank you in advance!
Last edited by ConstruKction (2014-04-14 11:08:17)

Hello,
I went with the suggestion of using fcitx instead of IBus. I once again decided to follow the fcitx Arch Wiki thoroughly. Here's what I've done:
I've installed fcitx-im and fcitx-mozc packages. Before that, I completely removed IBus.
I put this in my ~/.xprofile and ~/.profile
export GTK_IM_MODULE=fcitx
export QT_IM_MODULE=fcitx
export XMODIFIERS="@im=fcitx"
After that, I configured my fcitx, and added mozc as my layout for Japanese.
Ran this command, too since Gnome apparently tries its best to break other IMEs.
$ gsettings set org.gnome.settings-daemon.plugins.keyboard active false
Fcitx seemed much, much better than IBus. It's faster and more responsive, however, the Skype lament still persisted, so I decided to test out one more thing, which has caught my eye whenever I ran an application through the console. The error message was saying something about 'falling back to the "C" locale', so I went way back to the "locale" Arch Wiki article, only to find out, that inside my /etc/locale.gen, I had only one US locale. On top of that, the US locale in locale.gen was different than the US locale in /etc/locale.conf.
A silly, yet, overlooked mistake.
After uncommenting my locale, generating a new one and rebooting my system, Skype finally came back to life, and I was able to type Japanese inside its text field.
Thank you again for your input! This case is solved.

[SOLVED] Japanese input makes things weird

Hello everybody!
Well, recently I've reinstalled Arch Linux. Everything was ok (as well in the previous installation), but since I've installed the Japanese input/fonts, my fonts got weird into QT applications. But that happens only when I activate the input for QT apps! The following image will show you better what is happening:
While the correct is:
I call Anki with the following command:
export LC_CTYPE="ja_JP.utf8" && anki
I have the Japanese fonts installed in my computer and the locales.conf is set with the Japanese language. I use GNOME. Any ideas?
Thank you and apologise this bad written English.
Daniel
Last edited by danielskoda (2009-06-15 12:49:15)

Oh, I know your problem. I should have noticed it earlier when you showed a screenshot of a program that wasn't in English, but I noticed it now when you posted your .xprofile file. A little too late now I guess.
http://wiki.archlinux.org/index.php/Sci … ated_files
You need to add your current locale to the supported unicode locales for scim to work with anything other than GTK programs.
But if uim works and you like it, you might as well just stick with uim.
As for defining a font for Asian languages, what do you mean? If you only use Japanese and not Chinese or Korean it shouldn't be much of a problem, you could just put a Japanese font there and it'll borrow from that by default. (Or do you have multiple Japanese fonts or something and you want to choose one?)
You can set a priorities list, by making certain fonts take priority over others, but you can't set a different font for each language because it is impossible for unicode to tell which language it is. This is my .fonts.conf:
<fontconfig>
<alias>
<family>Monospace</family>
<prefer>
<family>DejaVu Sans Mono</family>
<family>Arial Unicode MS</family>
</prefer>
</alias>
<alias>
<family>sans-serif</family>
<prefer>
<family>DejaVu Sans</family>
<family>iYaHei</family>
<family>Malgun Gothic</family>
<family>Arial Unicode MS</family>
</prefer>
</alias>
<alias>
<family>serif</family>
<prefer>
<family>Times New Roman</family>
<family>MS Mincho</family>
<family>MingLiU</family>
<family>MS Song</family>
<family>UnBatang</family>
<family>Arial Unicode MS</family>
</prefer>
</alias>
<dir>/home/sokuban/.fontmatrix</dir>
</fontconfig>
So for example, "Sans" uses "DejaVu Sans" for Latin characters, and if "Sans" needs to display a glyph that "DejaVu Sans" doesn't have, it tries "iYaHei", then "Malgun Gothic" if "iYaHei" can't display it etc etc.
However, in firefox you /can/ set a different font for each language. It can be done from the GUI menu: Edit > Preferences > Content > Fonts & Colors
Last edited by sokuban (2009-06-15 17:20:12)

Ibus japanese input not working in gnome

Just like the title says. Both in gnome 3.10 and 3.12. It works for a little time sometimes, but the japanese input gui just disappears after a while and I can't get it back. Any tips?
Last edited by gothmog123 (2014-04-15 01:38:38)

You might try fcitx with mozc instead.

How to read and input Chinese through Blackberry wireless cell phone

The way to read and input Chinese through Blackberry wireless cell phone
My phone model is Blackberry 8520.
My Blackberry can read and input Chinese after these steps.
1. Go to the weblink http://na.blackberry.com/eng/support/downloads/download_sites.jsp
2. Click "China Mobile Peoples Telephone" included in "Asia Pacific".
3.Select a product from the drop down menu, for example, mine is BlackBerry 8520, and I select it.
4.Click "next"
5.Then select the "Download Software" on thebottom of the same webpage.
6.Fill in all the information required on the following page, then "Next"
7. Start download the software to you PC, computer or laptop.
8.Install this downloaded software to your PC. The software is called "8520wifijEastAsia_PBr4.6.1_rel424_PL4.2.0.122_A4.6.1.286_China_Mobile_Hong_Kong_Co._Ltd"
9.Link your wireless cell phone to your PC
10.Then go to C:\Program Files\Common Files\Research In Motion\AppLoader
11. Double click "Loader"
12. Select all the languages you want to update to your cell, and then follow the information to the left steps.
It will take about 20 minutes after Step 12 to finish the upload to the cell.
Done.
Now I am happy I can read and input both English and Chinese through my BlackBerry.
If you have any questions, please leave message to me on this web.
Good luck.
Grace

Hi Grace,
I'd faced the same issue as KU.
After all the installation.. it does not have any options for me to choose for the language.. can kindly assist me on this???
it only showed those applications that i had in my mobile...
Thanks
-fei-

Japanese Input Help

Hi everyone, I'm a new convert and I love it but I'm having trouble with Japanese input.
When working I have to constantly switch between English, hiragana, and katakana. With windows I used alt ~ to switch between romaji and hiragana, then I would use f7 to convert the most recent word to katakana.
For OS X I have a working non-ideal solution, I removed everything but hiragana and english. I can flip between them easily now, however, that creates the problem of katakana. If I add katakana to the input menu then it makes flipping between english and hiragana a lot more annoying considering the frequency. That and having to add/remove Chinese when I occasionally need it is a pain.
I'm not trying to nitpick, and this wouldn't be that big a deal if I didn't have to flip about 50 - 100 times a day.

For OS X I have a working non-ideal solution, I
removed everything but hiragana and english. I can
flip between them easily now, however, that creates
the problem of katakana. If I add katakana to the
input menu then it makes flipping between english and
hiragana a lot more annoying considering the
frequency. That and having to add/remove Chinese when
I occasionally need it is a pain.
Have you looked at the Transliterate options which have keyboard shortcuts and which appear at the bottom of the "flag" menu when Hiragana is active? I don't know if these do what you want for Katakana.
You might also want to ask in the Apple Japanese forums, a link to which is at the bottom of this page:
http://homepage.mac.com/thgewecke/TypingJapanese.html

Japanese Input (Kotoeri)

Hello,
I'm using the Japanese input (Kotoeri) on MacOSX configured with French as main language. My keyboard is a Japanese keyboard.
It just so happens that regularly (once a month), the keyboard mapping stubbornly switches to AZERTY in Romaji mode.
If I check the Preferences, the Layout for the Romaji Mode is correctly set to "US". If I unset and reset to "US", it works for some seconds then switches back to AZERTY (which is the "stubborn" part)
If I delete the preference file ("~/Library/Preferences/com.apple.inputmethod.Kotoeri.plist") and logout, the issue get fixed, but would eventually come back after a month or so.
This is happenning now for some time and it's breaking my nerves, so if somebody has an idea. The broken and valid configuration files can be found at on this link: https://files.me.com/trouve.antoine/2rfqct
Thank you.
Message was edited by: yopmaster

If you know Japanese well, you might also ask on the Japanese forum:
http://discussionsjapan.apple.com

Series 60 3rd Edition Japanese Input

Hi
I posted a similar topic about this for the N70 but plans didn't pan out as originally intended and it wasn't required.
I'm planning to return to the UK and I am looking at phones for my return. I've used some variant of Series 60 for the past 4 years and would quite like to continue.
Is there any way (third party or otherwise) of getting a 3rd Edition phone running an IME for Japanese text with Japanese font?
2nd Edition phones can run applications by Psiloc however I've contacted them and they have stated that they are not intending on upgrading these applications to 3rd Edition in the near future.
I really need a phone that I can enter Japanese into, any suggestions?

Update...
You have the full procedure explained here:
http://erwan.jp/2008/10/29/japanese-input-on-s60/
I haven't tried it yet, but I definitely will.
I hope it works on Nokia N95.
Cheers.
Moderator note: one external link removed. All external links must be to sites in English, you are welcome to repost the link if the page has an English version available.
Message Edited by michaels on 13-May-2009 04:19 PM

Bulgarian as an input language for BlackBerry Q10

Please add Bulgarian, a language of the European community, as an input language for BlackBerry smartphones. It's a great disappointment to find that your home language is not available on your phone, especially as Bulgaria has been part of the EU for more than 6 years now. I hope BlackBerry software developers will show respect towards their, not few, Bulgarian clients and am awaiting of a comment to my post.

You can load another carrier's OS on your phone. You just need to see if Danish is a language in one of the multilanguage OS packages for the 8320. Check out the following link for how to load the multilanguage OS on your phone
http://www.blackberryforums.com/general-8300-series-discussion-curve/164363-os-8320-4-5-0-152-4-5-0-...
Just an FYI, without a data plan you won't be able to use many of the BlackBerry features like BlackBerry Messenger, IM Clients, setting up email, etc.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Kotoeri Japanese input not working at all on Leopard

I recently installed leopard, wiped HDD and did fresh install. after doing all my apps and transferring data etc, i found i couldnt setup up Japanese input (kotoeri). Japanese was not listed under the input menu tab of international settings in system preferences. So i found out somewhere else i should install the japanese language from the optional installs pacakge of the dvd. so i did that, and kotoeri now appears in the list of input menus, but it doesnt work. All the sub options (6 of them for hiragana, katakana etc) all appear in japanese script (which is weird, they appeared in roman alphabet in os 10.4, and the icons look strange too). Anyway, if i select one of them, im not able to type at all in japanese, it just continues to type in english. I tried many different apps, windows, finder windows etc. Nothing. Is there some way to install this functionality, i really dont want to have to install the os again..

I've not heard of anyone else with your problem and don't know of any possible fix other maybe a reinstall. If you know Japanese well, you might try asking in the Japanese forums:
http://discussions.info.apple.co.jp/

Handling Japanese Input in an Applet on Windows

Hey there,
We're working on a Java applet that needs to be able to handle Japanese input. The input methods on the Mac work just fine. On Windows (Win2k, specifically) it seems to fall appart. We've been using the Windows standard Japanese input method (IME-2000) and we've run tests using both the IE native JVM and the Java Plugin (1.4.0). In the native JVM we just get a ? on input and the value of the key character is 0. In the Plugin all we get are empty boxes. I'm not sure what the value of the key character is in the plugin as I haven't been able to trap a key-press event.
Interestingly, you can copy a Japanese character from another program (Word, for example) and paste that character into the native JVM. Even the copy and paste method didn't work in the Java Plugin.
It seems unlikely that this is a font issue. We can display Japanese characters (input from a Mac) in both the native IE VM and the Java Plugin (assuming the correct font is selected). We simply cannot accept input.
We're currently compling to the 1.1.7 spec using WebGain VisualCafe 4.1. All the interface elements are AWT based.
So, the question is, has anyone else found a fix for this problem?

Not too sure why it is, but someone once suggested that the Microsoft IME doesn't support unicode, and therefore won't produce the correct code for Java.
If you read through the documentation provided by Sun, it also states that the Microsoft IME's don't work.

System sudden slow/no more Japanese input

Hi,
I have an iBook G3 with the latest version of 10.3 on it. Suddenly, the system has become very slow, and the Japanese input has stopped working.
I repaired all permissions but to no avail.
What could it be? Should I go to a full new system install right away?
Thanks,
Martin
iBook G3 500 Mhz Mac OS X (10.3.9) 640 MB RAM

You're Very Welcome Martin!
I'm happy I could help you solve your problem.
Be careful not to let your HD get too full again! That factor could have led to the corruption of the user account.
Also, I notice that you have marked your question as answered, but have not utilized the Helpful or Solved options. That may be intentional, but, if you are not aware of the benefits, of using that function, here is some information.
When you mark the appropriate posts as Helpful (5 pts) 2 available, or Solved (10 pts) 1 available, you are Thanking the contributors, by awarding them points.
In threads with multiple replies, it also alerts other readers, to which answers may have been helpful, or solved the issue.
This info, and more, can be viewed by clicking on
? Help & Terms of Use, located under your login name, on all "Discussions" pages.
Specifically What are question answers?.
The Helpful and Solved buttons, that award points, are to the left of the Reply button in each response.
These are not the same as Did this topic solve your issue? Yes No these, which do not award points. As explained Here.
Thank You, for extending the courtesy, of awarding stars,
ali b

Japanese Input on a Blackberry in Germany

Similar Messages

Maybe you are looking for