JApplet in browser doesn't refresh

Hi -
I'm putting together an applet which currently contains only a few JButtons in a container. When the browser is minumized and then maximized, the buttons do not redisplay. Functionally, they're still there (they respond if I click in the right place), but they don't show up.
What technique to I need to use to refresh the browser window? Is there a FAQ?
Thanks!
Gary

got it.
container.paintComponents(Graphics g);

Similar Messages

Bug:File Browser Doesn't refresh

One a directory is opened in the file browser, it can't be refreshed without restarting sqldeveloper.
1 Open a directory in the file browser.
2 Create an additional file in the directory outside of sqldeveloper
3 Try to make the new file appear.
Closing and opening the directory doesn't work
Clicking on what looks like a refresh button (two arrows ina circle) doesn't work.
1.5.1
Windows XP Pro Service Pack 2
Message was edited by:
Jim Smith

I cannot confirm this, everything works fine for me...
What JDK are you using?
I am runnin 1.5.1.5440 with JDK 6 Update 6...
Although now that I look at the file browser it has incredibly limited functionality (context menu). A READ-Only File Browser? Come on...
-Tim
Message was edited by:
TimS

Media Browser doesn't refresh Aperture images

This just started happening recently. The old behaviour was -- iWeb is already open, I open Aperture, add images, and the media browser in iWeb would pick up the new images within a few seconds.
Now the only way I can get the media browser to show the new images is to exit and restart iWeb.
Any way to get the automatic media browser refresh working again?

Have you tried reapplying the following:
iLife Media Browser Update
iLife Support 9.0.3
OT

E61i internet browser doesn't display properly

Hello,
I never had any problems browsing the internet on my E61i. My Nokia is always switched on, but today I had to switch it off for a while. After switching in on again, I wanted to use the internet on it. The strange thing was that it wouldn't display any web page properly any more. Pages look messy, like the web browser doesn't how to handle HTML etc. and display it properly.
I often visit web pages not specially made for PDA's, so when visiting these I had to scroll horizontally. That was ok. But now when visiting these pages I cannot scroll horizontally any more; the browser puts all web page contents beneath each other, if you know what I mean. Now I can only scroll vertically.
The conclusion is that many web pages I used to visit have now become useless since the E61i web browser doesn't display them any more as they used to be displayed, the pages used to look like as if you visited them from a PC, but not any more.
Does anybody have a clue?

It sounds like a cache issue. When you view the page, that
page is loaded into your (or your client's) browser's cache memory.
This is done so that when you return to that page it will load
faster (since it is already loaded into memory).
This will only happen if a person has been to the page
recently. There is a limit on the amount of information your
browser will store in cache memory. The more you surf, the more
likely it is that the page will be replaced in the cache memory
with some other information.
You (and your client) can, depending on what browser you are
using, set your preferences so that all web pages will be
completely reloaded every time you visit them. In IE 6 for Win:
Tools>Internet Options>Settings> Select 'Every visit to
the page'. You can also set your cache to be the minimum amount of
space alotted. Note: This doesn't really work very well in IE 6 for
WIN. I use firefox for reviewing changes because I have found IE 6
is completely unreliable for viewing the latest.
Most other browsers will allow you to hold down Shift and hit
'refresh' to throw out the cache for that page and view the latest.
As far as I know this is standard operating procedure for proofing
new pages.
If there is a coding technique to force a browser to use only
the latest information, I don't know what it is.
Good luck.

After updating to the latest version, I'm able to open and use the browser for one day. The next day, the browser doesn't not open up. please help!!!

-reformatted computer, reinstalled everything
-downloaded the newest version of mozilla
-happily went online for one day
-next day, browser does not load
-later the next day, browser doesn't even open up
-now when i go to open mozilla, something like this shows up:
"server busy, taking too long...if your firewall is on make sure mozilla is allowed to browse...adjust proxy settings blah blah...

HI Juanverano,
Not a problem, Safe Mode will disable addons and hardware acceleration. If this continues and it is not an add on this will be the next step to try to disable acceleration:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

How do I resolve this problem: This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required

When attempting to log in to the web site the following message is received. This web site works
on other systems using Firefox.
This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.
Additionally, a 401 Authorization Required error was encountered while trying to use an ErrorDocument to handle the request.
== URL of affected sites ==
http://www.mdyc.org/members_only

You may have saved a bad password so Firefox is entering that rather than giving you the option to try again. Go to Tools > Options > Security > Saved Passwords and delete the saved passwords for that site and then try logging in again.

Disk Utility doesn't refresh when inserting new DVDs

I'm in the process of copying a few DVDs by making an image of them first and then burning the image onto a blank DVD through Disk Utility.
After I'm done with one and insert a new DVD to copy, Disk Utility doesn't refresh to show me the new disk is in the drive. Is it normal?
If it is, is there something I can press so that Disk Utility manually refresh its listing of drives?
I find that quitting and restarting Disk Utility just to make a new image is so inefficient.

I am suddenly having the same problem. When I insert a blank disc either cd or dvd it does not show up in the left column in disc utility. I have tried closing and then relaunching disc utility but nothing. The disc shows up on my desk top but not in disc utility. I fear this is a Snow Leopard problem. Toast has no problem recognizing the disc and burning to it.

The administration console doesn't refresh

Hello,
I used WebCenter Portal Administration Console (http://<server>:<port>/<context_root>/admin to delete a page at runtime.
Then I added new pages in the page hierarchy in my portal application, which I would like to see in the admin console too, but it seems they don't show up
I mention that the admin console looks fine on my integrated environment but on the managed server it doesn't refresh.
How the admin console should be refreshed to reflect the latest changes?
Thanks,
Constantin

Yes, your understanding is correct. I added the pages in the pages folder in JDeveloper (11.1.1.4) and then added them to the page hierarchy.
Here is the pages.xml content
<?xml version="1.0" encoding="UTF-8" ?>
<pagesDef xmlns="http://xmlns.oracle.com/webcenter/page"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.oracle.com/webcenter/page/pagesDef.xsd">
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/home.jspx"
hidden="false" shared="false" hasSubPages="false" id="home"
overridePolicy="true"/>
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/ipc.jspx"
hidden="true" shared="false" hasSubPages="false" id="ipc"/>
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/google.jspx"
hidden="true" shared="false" hasSubPages="false" id="google"
overridePolicy="true"/>
<pageDef contentMRef="/oracle/webcenter/portalapp/pages/services.jspx"
hidden="true" shared="false" hasSubPages="false" id="services"/>
</pagesDef>
I can see all the pages in the IWLS admin but in WLS admin I can see only the "home" page.
Previously I deleted "ipc", "google" and "services" from WLS admin and I cannot see them again after a new deployment.
I can add new pages in WLS admin without any problem.
For IWLS, although I deleted the same pages in admin console, after a new deployment all the pages are shown.
I guess it is the setting "delete customization before each run" in JDeveloper which allows the refresh of the IWLS admin console too.
The question is what is the equivalant for WLS? Do I need to "clean" the customization?
Thanks,
Constantin

Bug: The message list doesn't refresh SOLVED caused by HWA (hardware assist)

I am using the latest Thunderbird from the beta channel, v38. I was seeing this in the stable release channel as well, so I thought I'd try the beta channel to see if it was fixed there, but it was not.
The issue is that the message list doesn't refresh all the time when switching folders. If I an in my Inbox folder, for example, and then select my Junk folder, the message list will not update/refresh, until I drag my mouse over the message list. Then, it will refresh line-by-line as the mouse enters each line.
I am on Windows 7 64-bit, with an i5 processor and 8 GB RAM. Nothing else on my system is running slow. This will happen when Thunderbird is the only app running. I also have a skin applied to my UI. I've tried a few different skins, and this behavior happens with all of them.
A second issue I noticed this morning was that when I received a new email, the entire app seemed to freeze momentarily while the notification for this new email was spawned. As soon as the notification became visible, the app because responsive again. Perhaps a threading issue here.

Hi Matt,
Thanks for the quick reply.
"The last issue is probably your anti virus diving in an scanning the new mail as it is added to a very large mail file. Right click the folder and select properties. What is the size on disk?"
Folder properties on my Inbox folder says:
Number of messages: 1038
Size on disk: 90.9 MB
"With regard to your first problem, I am seeing that on the daily built as well, on an intermitent basis, but not on change of folder, only on dragging the mouse over the existing list."
Yes, it is intermittent for me as well. I just recalled that the last time I saw it was when I changed folders. It may not be limited to that situation.
"What Video card do your have?"
Invidia GeForce GT 740, w/4GB dedicated video memory.
"Please go to the trouble shooting information on the help menu (alt+H) and copy and paste the graphics section to a message here."
Graphics
Adapter Description NVIDIA GeForce GT 740
Vendor ID 0x10de
Device ID 0x0fc8
Adapter RAM 4095
Adapter Drivers nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Driver Version 9.18.13.4475
Driver Date 11-12-2014
Direct2D Enabled true
DirectWrite Enabled true (6.2.9200.16571)
ClearType Parameters ClearType parameters not found
WebGL Renderer false
GPU Accelerated Windows 1/1 Direct3D 11
AzureCanvasBackend direct2d 1.1
AzureSkiaAccelerated 0
AzureFallbackCanvasBackend cairo
AzureContentBackend direct2d 1.1

ICal doesn't subscribe to timed events and doesn't refresh

In our office we each have a calendar which each person publishes on .Mac, and which others in the office subscribe to. We're experiencing the following problems:
-- "Refresh all" on some machines doesn't refresh calendars; each must be refreshed individually;
-- On some machines, all-day events appear, but timed events do not
-- In some cases calendars won't refresh properly; they display old information and don't update, even when manually refreshed. The calendar must be deleted and re-subscribed to on the subscribing machine. Sometimes even this doesn't work and has to be done repeatedly before the calendar is up to date.
We have a mix of iBooks, iMacs (from G4 to Intel), MacBook, PowerBook, and G5; running OS X 10.3 through 10.4. Could the mix of OS versions be the problem? Or should we use another server than .Mac to publish/subscribe to?

lilkirk87,
It probably means that you do not have "Calendars" selected in iPhone>Settings>iCloud.

Eigrp routes doesn't refresh when neighbor down

hi guys, need some tips for troubleshooting an ongoing issue, but can't do the changes anymore untill next call and yes the issue is still ongoing.
                       WAN1 <--------------------------------------------------------------------------------------------> WAN2
                           |                                                                             |
                   metro ethernet ME-3600X-A <----> ME-3600X-B <-----> ME-3600X-C<----> c3560v2
I have 3 metro ethernet switches and a c3560v2 switch connected as above. The WAN1 redistributes all routes to ME-3600X-A's eigrp and WAN2 redistributes all routes to c3560v2 's eigrp and these two propagates all their eigrp routes to ME-3600X-B and ME-3600X-C which are in the same eigrp AS. And all link/connections are point-to-point.
Now, when the link between ME-3600X-B <----> ME-3600X-C is physically disconnected, the ME-3600X-C's eigrp still points the route(s) to the ME-3600X-B's p2p ip as its next-hop - which is down(neighborship between them goes down, but still the routes doesn't refresh/rebuild). However, switch c3560v2 has route to the same network learnt from WAN2.
Wonder why, need inputs please? Thanks.

You shouldn't reference the CrystalReportViewer in the Page_Load handler, since there's issues with serialization of the report source:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/
en/en/CrystalReports_dotNET_SDK/crsdk_net_doc/doc/
crsdk_net_doc/html/
crconsdkfundamentalspersistencepageloadeventhandler.htm
In fact, you should save the report source in session, and bind it to the viewer on post-back. Sample code can be found here:
http://resources.businessobjects.com/support/communitycs/
FilesAndUpdates/sample_applications_for_.NET_developers.pdf
Sincerely,
Ted Ueda

Every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

every time I try to access the ASPX pages, the browser doesn't display the pages. Instead, a popup box asks if I want to open or save

What site is doing this? 99% of the time it is a problem with the headers sent from the web server.

My safari browser doesn't display as it normally should

my safari browser doesn't display as it normally should with all the colors/animations/pictures. I've tried the 32 bit mode, I've tried restarting safari, I've tried and even after the update in safari and the OS, it still looks like this. What can I do to fix it?

Hi adidas --
Double check your Safari preferences.
Make sure in "Appearance" that "Display images when the page opens" is checked.

Some browser doesn't display the MW page correctly

after installing Maintenance Wizard 2.17, some browser doesn't display the MW page correctly, some menu function is missing. The display problem is not for everyone, some user's browser have no problem. Some user's IE are displaying it correctly. i.e. one user has both IE and firefox working, however, after she clear her java cache, both browser refuses to display the MW page correctly.
The resolution of PCs is set to the same value. however, the size of the text isn't. after changing the size of the text, some of our pc start to work. The display web page for MW doesn't show the right most menu item. After resize the screen, we find it is because of the blue frame for the MW page that stop to dynamical stretch up to 20 inches.
The menu item is been streched out of the blue frame, they are no longer displayable
any ideas?

We have the same problem.
And find it is caused by a combination of your screen resolution, font size and browser window size.
The blue frame that displays the Oracle Mainentance Wizard banner doesnt dynamical strech to the full window size.
After experiment with it, MW can display much better in our case.

Swing doesn't refresh/repaint properly

Hi,
I'm trying to display a very simple dialog that just about says "Please wait" while I do i/o extensive processing, and can't for the life of me succeed. I tried many things, including Threads, SwingWorker, to no avail. Something seems fishy in that I would expect a window that is setVisible(true) to be completely painted before processing resumes, but in all my cases the window comes up empty while the work gets done.
Is there something special that I should do?
Similarly, sending a somedialog.setVisible(false) before doing some I/O work erases the window but leaves the background erased, i.e. the underlying window doesn't refresh. How can I ensure that any GUI stuff is finished before resuming the processing?
Thanks

Sorry, I just noticed that only half of my code got pasted:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class DialogWait extends JFrame implements ActionListener
     public DialogWait()
          JButton button = new JButton("Start Long Running Task");
          button.addActionListener( this );
          getContentPane().add( button );
     public void actionPerformed(ActionEvent e)
          JDialog dialog = new JDialog(this, "Please Wait Test", true);
          dialog.getContentPane().add( new JLabel("Please wait for 5 seconds...") );
          dialog.pack();
          dialog.setLocationRelativeTo( this );
          Thread longRunningTask = new MyThread( dialog );
          longRunningTask.start();
          dialog.setVisible( true );
          dispose();
     class MyThread extends Thread
          JDialog dialog;
          public MyThread(JDialog dialog)
               this.dialog = dialog;
          public void run()
               long start = System.currentTimeMillis();
               long current = start;
               // Tight loop to hog CPU
               while (current - start < 5000)
                    current = System.currentTimeMillis();
               System.out.println( "Long task finished" );
               dialog.setVisible( false );
     public static void main(String[] args)
          JFrame frame = new DialogWait();
          frame.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          frame.pack();
          frame.setLocationRelativeTo( null );
          frame.setVisible(true);
}Notice my code is in a tight loop which should hog the CPU more than even doing heavy I/O should. Mind you on my computer the CPU only maxes out at 50%. So maybe thats why it works for me.
Yes I tried something very similar, Well, don't try something similiar, try something exactly the same. (ie. does my program work on your machine?) If so, then the way you coded you other examples is wrong and we can't help since you haven't posted simple demo code that doesn't work.
http://www.physci.org/codes/sscce.jsp

JApplet in browser doesn't refresh

Similar Messages

Maybe you are looking for