JApplet initialization problem

I am experiencing a problem with a JApplet that has me perplexed... I wrote the JApplet to act as a front end to a servlet. I am using the Jakarta Tomcat server to execute both the servlet and to serve the web page which contains the applet. The html page containing the applet has been configure to load the latest JRE plugin into a users browser, if need be, and that works OK. When I run the applet from a browser on my own system, I don't have any problems, but when I tried to load the applet over the internet, at a friends house, I get the following walkback... Seems to be complaining about a "no proxy"... Can anyone tell me what this means? The applet does use Swing components, but my understanding is that is OK so long as the latest JRE plugin is installed. My server is up an down a lot, as I develop this application, but you are free to give the applet a try and let me know what you see... The URL is http://www.marcchamberlin.com/control.htm and don't be surprised that it is slow to respond, that is done on purpose so give it a minute... Any help would be much appreciated... ;-)
Opening http://www.marcchamberlin.com/javax/swing/JApplet.class no proxy
load: class DisplayStarChart.class not found.
java.lang.ClassNotFoundException: DisplayStarChart
at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:385)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:462)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:395)
at sun.applet.AppletPanel.run(Compiled Code)
at java.lang.Thread.run(Thread.java:474)
P.S. What are Duke Dollars???? Seems to be a lack of documentation about them ;-)

Seems to work OK for me. I got the applet, no problem, and the star-chart was a grey area with the text "star chart goes here". Eventually, the real star-chart appeared (and mighty cool iot looked, too ;-). Here's the output from my Java console:
Servlet URL = http://www.marcchamberlin.com/servlet/StarChartServlet
Servlet URL = http://www.marcchamberlin.com/servlet/StarChartServlet
Attempting to connect to Star Chart Servlet
Attempting to connect to Star Chart Servlet
Connection to servlet has succeeded!
Servlet URL = http://www.marcchamberlin.com/servlet/StarChartServlet?user=userIdent&move=RA%3A+19h30m00.00sDEC%3A+%2B0%B00%270.0%22FOV%3A%2B20%B000%2700%22&date=2001-6-1T10%3A54%3A11
Attempting to connect to Star Chart Servlet
Connection to servlet has succeeded!
Maybe the "no proxy" thing on your friend's system is because he/she is behind some kind of "difficult"' firewall, or the ISP has some strange proxy setup or something?? (I'm using a router as a firewall, and have no proxy set up). Anyway, I get the impression that it's the hardware, not your software, that is the problem. Maybe try it from somewhere else (the local library?!?)

Similar Messages

GenericServiceFactory initialization problem when trying to load Web servic

Hi,
I am making a Guided procedure that calls a webservice. I have created a new Destination Template and was able to load the webservice definition successfully, but when I test the callable object I created for that same webservice y get the error:
GenericServiceFactory initialization problem when trying to load Web service model for WSDL.
Somehow I think there is something wrong with the user authentication. The Destination template has a user and password but somehow I think the callable object test is not using this information at all.
Can anyone help ?
Thanks in advance

Hi Hans,
Have you verified if you can call any external web service calls from your J2EE engine? Go into the SOA Management / Global settings (if you are on CE - if you're on 7.0 it's in manage WS desintations).
Look at your proxy settings and set them like your web browser that enables external calls. For example, in the SAP network I set my global proxy settings on my local J2EE engine to be:
Proxy host: proxy
Proxy port: 8080
Exclude list: *.sap.corp
Does that make sense - have you verified if your settings are correct for your company?
Regards
Ginger

Unavailable or Initialization problem when viewing the servlets from admin console

Hi
I am on Weblogic 5.1.0. I connect to myServer which comes configured by
default. When i see the
registered servlets inside HTTP, on the console i see Unavailable or
Initialization problem on every
servlet that i select. Also when i try to load the servlet, it gives me the
following error :--
Property Change error for property "Load". Unable to load servlet.
This is happening for all the servlets which are inside the General
application inside HTTP tab.
But when i executing the servlet examples that comes along with Weblogic,
those examples are
working fine.
Also, i started my console and started the "myServer" instance and attached
it to the console. But due to
some reason my console hung. So i closed down the console window by pressing
the browser close button.
The weblogic server instance of "myServer" was still running. Then i started
the console again and attached the
running weblogic server instance of "myServer" to the console and went to
servlets. This time all the servlets
show "Previous Class Load Problem".
Why all this is happening. Has this any where documented how to use the
Weblogic console and Weblogic server
instances. I have gone thru the Installation documentation of Weblogic but
nothing like this has been mentioned over
there.
Thanks for ur help
Niranjan

Hi,
Try to find which object causing high cpu usage following Oracle Doc ID 779349.1.
by looking into the files then we can find what would be exact cause of this issue.
Regards,
Kalyan

Why "Export Error Codec Initialization Problem!" when I export using Adobe Media Encorder for FLV?

I get "Export Error - Codec Initialization Problem!" when I try to export a project using Adobe Media Encoder as a Macromeida Flash Video. Premiere Pro 2.0 goes through the rendering process but no file is created; just the Export Error message. What does this mean, and what do I need to do to export a project as a FLV file?
Thanks.

Sounds weird... You could try the standard fix for general unexplained behaviour in a document; export it to idml, open that, save as an Indesign file and try exporting again. If that doesn't work try a few different presets, like smallest file size. If that doesn't work try opening your image in Photoshop, resaving as a psd, placing that (delete your old one) and see if that helps. Obviously do this on a copy....

Early Chipset Initialization Problem

Hello all,
After reading around this board I havn't found a very good answer for the Early Chipset Initialization problem. (which is the code that D-bracket gives me) Everything is entirely new, Including the new PSU that I bought to try to fix the problem. Any ideas? I know it's not the PSU so don't try telling me that.
The funny thing about this problem...the computer locks up and gives me the Neo Platinum screen, gives one beep to say the POST finished, and then locks up and I can't use the keyboard or get into the BIOS. Oddly enough, if I hit the reset button it boots up just fine. I'm thinking perhaps a faultly reset switch but has anybody else had this problem?

Quote
Originally posted by naedaneth
Hello all,
The funny thing about this problem...the computer locks up and gives me the Neo Platinum screen, gives one beep to say the POST finished, and then locks up and I can't use the keyboard or get into the BIOS. Oddly enough, if I hit the reset button it boots up just fine. I'm thinking perhaps a faultly reset switch but has anybody else had this problem?
Yeah try using a USB keyboard instead if you are using a PS2 keyboard..

Codec Initialization Problem!

Hi,
I'm trying to use Adobe Media Encoder CS6 to convert a mov file of size 3072 by 768 resolution to f4v of the same attributes.
However, I get the error Codec Initialization Problem!.
I can convert it to f4v at 1920x1080 or other lower resolutions.
Please help.
Thank you

Thank you!!!!

JSPServlet Initialization problem

Sorry for asking such a simple question.
          I'm just a notice in WebLogic Server.
          When I tried to run JSP pages, I have this problem
          "weblogic.servlet.JSPServlet<unavailable or initialization problem>"
          I'm using WebLogic 5.1.
          weblogic.properties files JSP configuration is as follows
          # WEBLOGIC JSP PROPERTIES
          # Sets up automatic page compilation for JSP. Adjust init args for
          # directory locations and uncomment to use.
          weblogic.httpd.register.*.jsp=\
          weblogic.servlet.JSPServlet
          weblogic.httpd.initArgs.*.jsp=\
          pageCheckSeconds=0,\
          compileCommand=c:/jdk1.3/bin/javac.exe,\
          workingDir=d:/data/program/weblogic/myserver/classfiles,\
          verbose=true
          I have JDK1.3 installed under C: (Windows NT4.0 w/ Service Pack 4)
          Could anyone help me out?
          Thanks in advance.
          Billy Park


Sorry for asking such a simple question.
          I'm just a notice in WebLogic Server.
          When I tried to run JSP pages, I have this problem
          "weblogic.servlet.JSPServlet<unavailable or initialization problem>"
          I'm using WebLogic 5.1.
          weblogic.properties files JSP configuration is as follows
          # WEBLOGIC JSP PROPERTIES
          # Sets up automatic page compilation for JSP. Adjust init args for
          # directory locations and uncomment to use.
          weblogic.httpd.register.*.jsp=\
          weblogic.servlet.JSPServlet
          weblogic.httpd.initArgs.*.jsp=\
          pageCheckSeconds=0,\
          compileCommand=c:/jdk1.3/bin/javac.exe,\
          workingDir=d:/data/program/weblogic/myserver/classfiles,\
          verbose=true
          I have JDK1.3 installed under C: (Windows NT4.0 w/ Service Pack 4)
          Could anyone help me out?
          Thanks in advance.
          Billy Park

ConnectionServer cannot started - NT Service Initialization Problem

When I startup a "Connection Server" for "Business Object Enterprise 12.0" under Windows XP Professional machine, following error raised.
Could you tell me what is the problem. Thanks.
Timestamp     ProcessID     ThreadID     Message
[Wed May 20 09:30:21 2009]     6712     8100     Log: level=3 cat=1 msg=35100 p=ConnectionServer started
[Wed May 20 09:30:21 2009]     6712     8100     trace message: Creating controller thread
[Wed May 20 09:30:21 2009]     6712     8100     trace message: Waiting on monitor to initialize
[Wed May 20 09:30:21 2009]     6712     2412     trace message: In service controller thread's run!
[Wed May 20 09:30:21 2009]     6712     8100     trace message: SIServerController::waitingToInitialize
[Wed May 20 09:30:21 2009]     6712     2412     trace message: SINTService::run enter
[Wed May 20 09:30:36 2009]     6712     2412     trace message: SIServerController::initialize
[Wed May 20 09:30:36 2009]     6712     2412     assert failure: (.\siservice.cpp:839). (false : StartServiceCtrlDispatcher: The operation completed successfully.
[Wed May 20 09:30:36 2009]     6712     2412     Log: level=0 cat=14 msg=35500 p=NT Service Initialization Problem
[Wed May 20 09:30:36 2009]     6712     2412     trace message: SINTService::run: Cannot start service control dispatcher

Hi Thomas,
I am having the same issue...I couldn't able to start CMS (Content Management services ) .
Reducing the tomcat heap size doesn't help in my case....
Regards, Anil

Early Chipset Initialization problem with K8T Neo 2 - FIS2R

This one has me stumped.
I went to install a new CPU fan earlier today and while I was installing the fan I had to remove my sound card and AGP card so I could screw the fan to the side of the heat sink.
I got all that done and went to start the computer back up and now I get a contineous high pitched sound while at the same time 3 beeps. The D bracket shows a green LED on 1 so this is the "early chipset initialization" problem.
What is causing this and why would this happen after a fan installation?
Specs
A64 3200+ Winchester
1.5 GB RAM (2x 512, 2x 256) DDR 400
MSI K8T Neo 2 - FIS2R
PNY GF 6800
Audigy 2 ZS Gamer
200GB IDE HDD
80 GB IDE HDD
DVD - R/RW
Win XP Pro w/ SP2

Okay after a bit of messing around with the problem I discovered what the problem was....
I didn't plug in the power to the video card
Yeah the 6800 uses needs more power from the PSU and I left that little rail unplugged. Maybe some other soul will find this useful in a time of need.

Web service model initialization problem

Hello, every one
I have some trouble in the initialization of web service model.
I tested the web service through web service navigator and it was ok.
My context structure is:
Request_ZBAPIWCALIST_zbapiWcalist(0..n)
--parameters(0..1)
rBdate(0..n)
high(string)
low(string)
option(string)
sign(string)
--Response(0..1)
Result(0..1)
tWca(0..n)
estat(string)
istat(string)
Following is my codes:
Request_ZBAPIWCALIST_zbapiWcalist model = new Request_ZBAPIWCALIST_zbapiWcalist();
ComplexType_ZbapiWcalist parameter = new ComplexType_ZbapiWcalist();
model.setParameters(parameter);
ComplexType_ZbapiRBdate rBdate = new ComplexType_ZbapiRBdate();
ComplexType_ZbapiRResp rResp = new ComplexType_ZbapiRResp();
ComplexType_ZbapiRTplnr rTplnr = new ComplexType_ZbapiRTplnr();
ComplexType_ZbapiRWapinr rWapinr = new ComplexType_ZbapiRWapinr();
ComplexType_ZbapiRWapius rWapius = new ComplexType_ZbapiRWapius();
ComplexType_ZbapiWcalistImport wcaImport = new ComplexType_ZbapiWcalistImport();
rBdate.setLow("2007-7-1");
rBdate.setHigh("2007-7-2");
rBdate.setOption("EQ");
rBdate.setSign("I");
rResp.setLow("");
rResp.setHigh("");
rResp.setOption("");
rResp.setSign("");
rTplnr.setLow("");
rTplnr.setHigh("");
rTplnr.setOption("");
rTplnr.setSign("");
rWapinr.setLow("");
rWapinr.setHigh("");
rWapinr.setOption("");
rWapinr.setSign("");
rWapius.setLow("");
rWapius.setHigh("");
rWapius.setOption("");
rWapius.setSign("");
wcaImport.setAnye("");
wcaImport.setAnyi("");
wcaImport.setSpd("");
wcaImport.setStatu("");
wcaImport.setWerks("");
ZbapiRBdate rBdateBean = rBdate.getOriginalBean();
ZbapiRResp rRespBean = rResp.getOriginalBean();
ZbapiRTplnr rTplnrBean = rTplnr.getOriginalBean();
ZbapiRWapinr rWapinrBean = rWapinr.getOriginalBean();
ZbapiRWapius rWapiusBean = rWapius.getOriginalBean();
ZbapiWcalistImport wcaImportBean = wcaImport.getOriginalBean();
ZbapiRBdate[] rBdateArray = new ZbapiRBdate[1];
rBdateArray[0] = rBdateBean;
ZbapiRResp[] rRespArray = new ZbapiRResp[1];
rRespArray[0] = rRespBean;
ZbapiRTplnr[] rTplnrArray = new ZbapiRTplnr[1];
rTplnrArray[0] = rTplnrBean;
ZbapiRWapinr[] rWapinrArray = new ZbapiRWapinr[1];
rWapinrArray[0] = rWapinrBean;
ZbapiRWapius[] rWapiusArray = new ZbapiRWapius[1];
rWapiusArray[0] = rWapiusBean;
wcalistBean.setRBdate(rBdateArray);
wcalistBean.setRResp(rRespArray);
wcalistBean.setRTplnr(rTplnrArray);
wcalistBean.setRWapinr(rWapinrArray);
wcalistBean.setRWapius(rWapiusArray);
wcalistBean.setWaImport(wcaImportBean);
wdContext.nodeRequest_ZBAPIWCALIST_zbapiWcalist().bind(model);
The exception is:
LocalizedMessage: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.XmlMarshalException: XML Serialization Error. Property [Low] of class [com.pjs.wcalist.model.wsmodel.proxies.types.p1.ZbapiRWapius] must exist and can not be null. This is required by schema description.
In the test of the web service the Low of the ZbapiRWapius is not needed.
And after setting the value, the exception told me that I must set the tWca, ie the subnode of the result.
The problem is: I do not know why the setter method of the original bean of the "parameters" only accept the parameter of array type .
I think the parameter I set may be wrong.
When I deal with another web service model(the level of the structure is not deep), it is ok.
Could someone give me some suggestion or explanation?
Thanks a lot.
Referring to the link:
Re: HELP for WebDynpro web service model with complex structure

Hi,
I ahbe set the proxy in webcontainer in configtool,Is there any other thing i need to do?But please tell me what does the error means,<b>GenericServiceFactory error</b>?
waiting for your reply,
Regards,
Ameya

LDAP Context Initialization Problem in a Servlet's Init method

Hi
I have a servlet where I am using the InitialDirContext to Initialize context to a LDAP Server. I have created the context as a static variable. I am initializing the context in the init method and am using the same reference in the service method of the servlet. But if the context fails (due to naming exception and time out) in the init method all my requests in the service method will fail. Is there any way to validate the reference before using the same in the service method.
Also what is the best approach to initialize the context in a servlet. Whether to initialize in the service method or the init method.
I would appreciate if anyone can answer the above 2 queries.
Thanks in advace,
Ashish

If you want to use threadsafe objects in doPost/doGet there are two common ways to do this.
First, create the object in doPost/doGet. This may get expensive depending on the object, but it is 'easy' code and works.
The second option is to create a pool of objects in the servlet's init() method and to just have doPost/doGet get an object from the pool, use it and return it when done. This take a little more work to code, but the overhead of creating objects is almost eliminated. Look at jakarta/apache commons pool for a quick way to do this.
If you create on object in init() and use it in doPost/doGet, any time you get two request for the same servlet at the same time you will have synchronization issues that will usually cause problems. There is one instance of each Servlet, so all request for that servlet go through the single instance. Anything in doPost/doGet must be threadsafe.

Initialization Problem in PRODUCTION

Hi SAPeans,
I am having an unusual problem like: I have enhanced a Generic Data Source by adding a field into it. I have written some code for it and i have uploaded data from DSO to Cube subsequently. I checked in DEV and Quality with Delta Initialization it is working fine and records are showing nicely.
But the problem is the same objects has been transported to PRD but here the Initialization is not working I am working with BI 7.0 When I am triggering the InfoPackage it is taking more time and showing yellow status. Why it is happening cud anyone please put some light on this issue.
Regards,
Phani.

Hi,
I think this is due to large volume of data which usually load in the production system.
This can happen either lacking of optimised code and if it is a further update make sure that psa should be there in between.
before doing the load check db statistics and system statistics.
hope it helps.

Installer Failed to Initialize problem

Hello,
I recently purchased a new MacBook Pro after years of using PC's. Previously I was using PS7 on my pc and I decided it was probably time to try out a newer version of PS on my new Mac. I am running Lion and I attempted to download and run PSC5 but I get the error "Installer Failed to Initialize". I downloaded the Adobe Advisor and it couldn't find anything wrong. I tried restarting my machine and that didn't help.
I realize that this might just be user error because I am not very familiar with Macs yet, but does anyone have any suggestions for me?

For people who go searching in the future to resolve this issue, I was able to resolve it by taking my computer into a Genuis Bar after trying to resolve the issue over the phone with Adobe support (they had no clue what the problem was).
I had an anti-virus program that I had removed from my computer but wasn't completely gone. This was causing a conflict with Adobe Installer. Despite having restarted the computer, ended all programs running, etc, the program was still running in the background. Be sure to check your running system programs - duh - for hidden programs that the Adobe Advisor doesn't catch. In my cast it was Avast! anti-virus.
For such a pricey program, I have to say that support is severely lacking.

JApplet debugging problem

Hi there all:
I'm having a problem with debugging a JApplet. I created a new workspace, project and applet and didn't make any changes to anything. When I try to debug the applet, I get these messages:
System Error: java.security.AccessControlException: access denied (java.lang.RuntimePermission modifyThreadGroup )
System Error: java.lang.Object java.lang.Class.newInstance0()
System Error: java.lang.Object java.lang.Class.newInstance()
System Error: java.applet.Applet sun.applet.AppletPanel.createApplet(sun.applet.AppletClassLoader)
System Error: void sun.applet.AppletPanel.runLoader()
System Error: void sun.applet.AppletPa
System Error: nel.run()
System Error: void java.lang.Thread.run()
If I change the object from a JApplet class to an Applet class, I can debug just fine.
Anyone know what's going on here?
Thanks
Jeff

Me again. Was doing some searching on the net about this one since I've gotten no response.
Found this at Inprise (Borland) about a debugging problem with JBuilder3 (I assume that the base of jdev is still JBuilder).
http://community.borland.com/article/0,1410,19739,00.html
To quote from their document--------
Question:
I can't seem to debug Applets with JBuilder3 Standard. If I attempt to debug my Applet
I recieve the following error:
java.security.AccessControlException: access denied (java.lang.RuntimePermission
modifyThreadGroup )
at java.security.AccessControlContext.checkPermission(AccessControlContext.java:195)
at java.security.AccessController.checkPermission(AccessController.java:403)
at java.lang.SecurityManager.checkPermission(SecurityManager.java:549)
Why?
Answer:
In a nutshell this is an installation problem with JBuilder3 Standard edition.
The install for JBuilder3 Standard did not provide the file 'DebugApplet.policy'.
To resolve this problem download the file from the following URL:
http://www.borland.com/devsupport/jbuilder/downloads/DebugApplet.policy
After you have downloaded the file, copy the file to your JBuilder3\bin directory.
This will fix the problem.
You can also cut and paste the following:
(NOTE: create the file DebugApplet.policy in your JBuilder3\bin directory)
//DebugApplet.policy
// These policy permissions are needed for the AppletViewer used by sun.tools.debug.
grant {
permission java.lang.RuntimePermission "accessClassInPackage.*";
permission java.lang.RuntimePermission "modifyThread";
permission java.lang.RuntimePermission "modifyThreadGroup";
permission java.net.SocketPermission "*", "accept, connect, listen, resolve";
permission java.util.PropertyPermission "appletviewer.version", "read";
permission java.io.FilePermission "<>", "read";
permission java.security.AllPermission;
Could this be a problem in JDev3 too?
Jeff
null

Dsccsetup initialization problem

Hello,
I am facing problem in initialization of dsccsetup.
I have DSEE 6.3 zip distribution on Solaris 10 x86 machines.
Please see below execution followed:
root@dr1 # ./dsccsetup status
Sun Java (TM) Web Console is not installed
DSCC Agent is not registered in Cacao
DSCC Registry has not been created yet
root@dr1 # ./dsccsetup initialize -v
DSCC Application cannot be registered because it is not installed
Registering DSCC Agent in Cacao...
## Running /opt/SUNWdsee/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm register-module /var/tmp/-632480837/com.sun.directory.nquick.xml
Checking Cacao status...
## Running /opt/SUNWdsee/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm status
## Running /opt/SUNWdsee/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm get-param network-bind-address
## Running /opt/SUNWdsee/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm list-modules
Deploying DSCC agent in Cacao...
## Running /opt/SUNWdsee/dsee6/cacao_2/usr/lib/cacao/bin/cacaoadm deploy /var/tmp/-632480837/com.sun.directory.nquick.xml
DSCC agent has been successfully registered in Cacao.
Choose password for Directory Service Manager:
Confirm password for Directory Service Manager:
Creating DSCC registry...
/opt/SUNWdsee/var/dscc6/dcc already exists
DSCC Registry has been created successfully
root@dr1 # smcwebserver enable
root@dr1 # ./dsccsetup initialize -v
DSCC Application cannot be registered because it is not installed
DSCC Agent is already registered
DSCC Registry has already been created
root@dr1 # smcwebserver status
Sun Java(TM) Web Console is stopped
root@dr1 # smcwebserver start
Console service cannot be started.
Run "svcadm clear system/webconsole:console" to repair.
root@dr1 # svcadm clear system/webconsole:console
root@dr1 # smcwebserver start
Starting Sun Java(TM) Web Console Version 3.1 ...
Check log file: /var/svc/log/system-webconsole:console.log
Run "svcs system/webconsole:console" to determine its status.
root@d1 # tail -f /var/svc/log/system-webconsole:console.log
[date : time] executing start method ("/lib/svc/method/svc-webconsole start") ]
Starting Sun Java(TM) Web Console Version 3.1 ...
Cannot determine if console started successfully
[ date: time] Method "start" exited with status 0 ]
[ date : time Stopping because all processes in service exited. ]
[ date: time Executing stop method ("/lib/svc/method/svc-webconsole stop") ]
The console is stopped.
[ date:time Method "stop" exited with status 0 ]
[ date:tim Executing start method ("/lib/svc/method/svc-webconsole start") ]
Starting Sun Java(TM) Web Console Version 3.1 ...
and these messages are repeating automatically.whats wrong? how come console is not installed.
regards,
sumant

Hello,
root@dr1 # pkginfo | grep "Solaris Management Console"
application SUNWcsmc                         Simplified Chinese Solaris Management Console 2.1
application SUNWessmc                        Spanish Solaris Management Console 2.1
application SUNWfrsmc                        French Solaris Management Console 2.1
application SUNWhksmc                        Traditional Chinese (Hong Kong) Solaris Management Console 2.1
application SUNWhsmc                         Traditional Chinese Solaris Management Console 2.1
application SUNWjsmc                         Japanese Solaris Management Console 2.1
application SUNWksmc                         Korean Solaris Management Console 2.1
application SUNWmc                           Solaris Management Console 2.1 (Server Components)
application SUNWmcc                          Solaris Management Console 2.1 (Client Components)
application SUNWmccom                        Solaris Management Console 2.1 (Common Components)
application SUNWmcdev                        Solaris Management Console 2.1 (Development Kit)
application SUNWmcex                         Solaris Management Console 2.1 (Examples)
application SUNWwbmc                         Solaris Management Console 2.1 (WBEM Components)what are you looking for?
regards,
sumant.

JApplet initialization problem

Similar Messages

Maybe you are looking for