Jar command jar -uf doesn't work on Vista

I try to use the jar command jar -uf to add information from a JAR into another. This works fine on XP, but not on Vista.
I use the same commands and the same files on Vista and XP, but I get this error message on Vista:
java.io.IOExeption: An error occured when writing to the JAR file
Why does this happen? How can I make the jar command jar -uf work on Vista?

I don't use Vista however it could be related to a [Vista file permission problem|http://paulstamatiou.com/2007/02/09/how-to-quickie-vista-permissions].

Similar Messages

  • Voice command for Contacts doesn't work after a re...

    Voice command for Contacts doesn't work after a reboot or a contacts restore.
    Steps to reproduce:
    1. Backup contacts. Open Files > Backup & Restore > Select Contact for Backup Contents and select Back up now.
    2. Edit/save a contact, press and hold the call button, speak contacts name. The voice recognition works fine.
    3. Restore contacts. Open Files > Backup & Restore > Select Contact for Backup Contents and select Restore.
    4. Reboot phone when prompted.
    5. Press and hold the call button, speak contacts name. The voice recognition does not work.
    Work around:
    Edit and save each contact.
    Additional Information:
    Social integration with contacts also does not work after a reboot. The facebook icon and "See what xxx is up to on Facebook" is not displayed. The same work around "Edit and save each contact" also applies. This occurs using the Nokia N8 and Nokia 808 Pureview.

    Nancy2015 wrote:
    I have my phone paired with my car, I can do everything except it does not recognize any of my contact names. If I try say a contact name, it says "not recognized" but if I say the contacts phone number, the name pops up onthe display in my car.
    Has anyone had this issue, is there a setting I am missing in my phone?
    Hello, 
    This is not necessarily and issue with the phone. It could also be an issue with the car`s bluetooth software that is only limited to some functions like reading your contacts list, last calls, missed calls, etc. which is most likely the basic 2.0 version. 
    The Z30 has the 4.0 version that has a lot more communication capability but if the car`s bluetooth its a lower version, then you will not be able to take full advantage of it unless you upgrade the bluetooth software in your car. Call your dealer and inquire about the bluetooth software upgrade in your car   

  • Command+1 shortcut doesn't work in iTunes 7?

    During the years of having iTunes 5 & 6, I used to have those keyboard shortcuts like command+1, command+2 to show the main window of iTunes and Equalizer. This function is really helpful when you choose one song to play, then close the iTunes window to save the space on desktop, then use command+1 to show the main window of iTunes again when you need it. Really convenient.
    But since I updated the iTunes 7 yesterday, I sadly found out that the key stroke combination of command+1 doesn't work anymore. Now every time when you need the iTunes window to show up, you have to click the iTunes 7 icon on the dock again. And same as the command+2 for equalizer. Since iTunes 7 erased the equalizer icon on the main pane in the corner right below, this is really not so fast as before to get those windows showed when you need them.
    This issue is really unlikely to happen because I checked the new help topics of iTunes 7, there still are the entries of command+1/2 in the help topics, but they just do not work!!! Is that a new bug of iTunes 7?
    Anyone has any idea about solving this problem? Or did anyone found the new keyboard shortcuts? Thanks in advance!!!
    PowerBook G4 17' 1.67Ghz   Mac OS X (10.4.7)  

    Anyone has any idea about solving this problem? Or
    did anyone found the new keyboard shortcuts? Thanks
    in advance!!!
    They can be created in System Preferences:
    http://discussions.apple.com/thread.jspa?threadID=637814&tstart=0
    Quicksilver dual-GHz G4, 1.83 Core Duo mini   Mac OS X (10.4.7)  

  • How do I fix a command key that doesn't work?

    I bought a new iMac in December  with the keyboard that comes with the system.  Now my command key doesn't work. I've tried reseting to defaults in case I did something without realizing it, but it hasn't worked.  The really strange thing is that it started working again once, then a few days later stopped again.  Any one know what my problrem might be?  It could be the keyboard itself, but if so, I'll be very disappointed!

    Do SMC reset, in order for it to work it make take 2-3 attempts. You can find instructions by clicking Intel iMac SMC and PRAM resets

  • Find Command in iCal doesn't work

    I have tried to use the Find Command in iCal. It doesn't work either from the Edit pull down command nor the keyboard command. Please try this in your setup and tell me whether it works?
    I have an Intel Mac Mini running 10.4.9.
    Bob Gallant

    Hi Bob,
    It works for me.
    Find will only search in selected calendars. Do you have the relevant calendars checked in the calendar list? (you can select all calendars by Command-Clicking one checkbox)
    Best wishes
    John M

  • Command-X (cut) doesn't work in finder

    If I use "Finder" and I want to "cut" a file the shortcut (command X) doesn't work and in the menu(edit) "cut" is grey.
    I can only use drag&drop... in "textedit" it's possible to "cut" words!
    What's going wrong?
    Please help!
    regards
    soho

    The original idea behind the Macintosh clipboard in 1984 was to allow for temporary cut/copy/paste actions inside applications for text and images. In Windows, cut/copy/paste was supported in the OS for actual files on disk, which really doesn't fit into the concept, but unfortunately became a very popular shortcut.
    In OS X, Apple decided to add support for copy/paste for files. Cut was not added. If you cut something (like text), and then cut/copy again, you lose your original cut. Similarly, to avoid a possible mistake where cut could permanently destroy a file, it is not supported in the OS X Finder.
    For most seasoned Mac users this isn't an issue, but for switchers from Windows it does seem a bit confusing. If you want to "cut" a file you really should just move it using drag&drop.

  • Executing command on startup doesn't work

    Hello,
    I'm trying to execute this script when X starts:
    xmodmap -e " keycode 118 = Delete"
    which works, when is executed manually from console. I tried to run it automaticaly after login and starting X by putting it into .zprofile, /etc/profile, /etc/profile.d/***, .xinit or to my awesome wm config (all other scripts here are executed normally - eg pulseaudio --start). But this command is never executed. I tried even variant with adding this to .Xmodmap and then add xmodmap .Xmodmap to .xinit, but without success.
    Thanks

    Kotrfa wrote:
    Here is how my .xinitrc looks like:
    #! /bin/bash
    xmodmap -e " keycode 118 = Delete"
    exec awesome
    When I manually type this command, everything works. But it doesn't work after reboot (and .xinitrc is surely executed, because awesome starts ok).
    xmodmap seems to be time sensible. Anyhow, on my WM startup file I have:
    (sleep 10; xmodmap ~/.Xmodmap; sleep 5; xmodmap ~/.Xmodmap) &
    I come to this by trial and error.
    Has said I have it on my WM startup file, but having it on .xinitrc is also OK.
    Mektub

  • Specifying resources in WCAP command "storeevents.wcap" doesn't work

    Hi all. I tried to add an event with a WCAP command like this :
    http://calendarserver/storeevents.wcap?id=XXXX&calid=XXXX&dtstart=XXXX&dtend=XXXX&summary=XXXX&resources=RESOURCE_CALID&fmt-out=text/xml
    The event is stored correctly but not the resource i want associate to it. I also tried "inviting" the ressource as an attendee (&attendees=RESOURCE_CALID) but i want the RSVP set to true, so this doesn't work for me either.

    Hi all. I tried to add an event with a WCAP command like this :
    http://calendarserver/storeevents.wcap?id=XXXX&calid=XXXX&dtstart=XXXX&dtend=XXXX&summary=XXXX&resources=RESOURCE_CALID&fmt-out=text/xml
    The event is stored correctly but not the resource i want associate to it. I also tried "inviting" the ressource as an attendee (&attendees=RESOURCE_CALID) but i want the RSVP set to true, so this doesn't work for me either.

  • My MacBook is frozen and Command/Option/Escape doesn't work. What do you suggest I do? Any suggestions?

    My MacBoook is frozen and Command/Option?escapedoesn't work. I tried turning it off manually, but that doesn't work either.  What doyou suggest?

    Any external BT keybaord or mouse that can be turned off and break a cycle in that interface?  Any external USB device or external monitor that can break a locked-loop on those dvices?
    Holding the power button for 10 seconds (maybe more) should hard-stop all (even background) processes.  Can leave the system unbottable if stopped at wrong point, so is a last resort.

  • Command + T shortcut doesn't work on Mac

    Using Firefox 5.0 on Mac OS X 10.6.8. The Command + T shortcut for opening a new tab doesn't work. I didn't try all the keyboard shortcuts, but among those ones I frequently use this is the only shortcut that doesn't work.

    Hi everyone,
    Thanks for your replies. However I think each of them misses the point. I realize that I should have given ( even ) more information, so sorry about that. I will try and do that here.
    It's about a link to a website like www.website.com ( is a fake name for example purposes!! ). It has worked on both my PC and laptop!! Somewhere along the way ( cannot quite remember when ) there was an update of some kind on my laptop, that apparantly hasn't occured on my PC ( yet ), that has caused the link to 'break'. Therefore I suspect it's a setting matter of some kind, but cannot figure out which one and where to (re)set. Also because the problem stays when I try to delete and recreate the link, also by dragging it from the website to the desktop.
    Hope this addition give you sufficient information. If not, don't hesitate to ask further questions.
    Thanks in advance.

  • Touch screen doesn't work after Vista Home64-bit upgrade to Windows 7 64-bit Home Premium on IQ506

    Hello, right before I upgraded to Win7, I made sure that the Touchsmart software worked and that the touch screen itself worked. As soon as I performed the upgrade (not the clean upgrade that wipes all your existing data, but rather the upgrade that carries over your applications and files), the touch screen ceased to work. 
    I didn't panic, thinking that I probably had to run some windows/hp updates, which I did to no avail. I also manually updated ALL the driver/software files found at this link http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us〈=en&product=3752245
    Yup, every single one. As a last resort, I tried some of the HP troubleshooting for touch screens not working. It said to shut down the computer, pull the plug on the computer, hold the power button for 5 seconds, plug the computer back in, and boot it up again. Didn't help at all.
    I'm at the end of my rope and there is no additional HP support on this. I'm waiting for a reliable driver update for win7 for this **bleep** touch screen. I'm dead in the water -- I've got a touchscreen computer whose touchscreen doesn't work! Someone else out there must be having this problem! Any leads?

    Did you try installing the Touch Driver?
    http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us&product=3752245&lang=en
    Driver
    Date
    Version
    Previous
    Size
    »  NextWindow Multi-Touch Device Driver Update
    11-2009
    1.3.0.2
    2.83M

  • Apple Wireless Keyboard doesn't work in Vista Ultmate?

    My Apple Wireless Keyboard doesn't work (not response) on Vista Ultmate but its works properly in Mac OS X 10.5.2...
    Should I install the driver in Mac OS first or update the keyboard firmware?
    Or install a driver for Windows Vista (I can't find any on web...)
    Please kindly help! Thanks a lot.

    this problem is fixed, but if anybody has an idea what happened, I would like to know.

  • Drag and drop from Mozilla to PS doesn't work with Vista

    On XP I can drag an image directly from Mozilla to Photoshop and it opens it in a new document. In Vista that doesn't work anymore.
    Any ideas if this can be fixed

    > Straight drag and drop to PS produced a warning message so, when I then tried to drag on to the PS task bar button, I got the Ø cursor but on moving into the PS window and releasing the mouse button there, the file opened.
    That's the strangest behavior that I would imagine. Are you using the default vista aero theme or you have turned down or using custom theme and visual effects?
    > it needs to be pointed out that this is a really bad habit that will smack you in the face one day...
    I don't understand what you mean. If you are concerned about viruses, in my understanding copying and opening a file from the internet which is what "Save image as" does, is less safe than coping and pasting pixels. Copying and pasting pixels is the same as coping and pasting text from your web browser, it can't execute hidden code. If that was possible everybody will get viruses at the moment text or pixels are displayed on your browser.
    By the way when you view a page from the internet, image files are already downloaded in the temp folder of your computer but only the browser uses them unless you open them from there and use in another program. So if you have a virus protection the images are already scanned.

  • TV tuner doesn't work on Vista - Qosmio G20-127

    My TV tuner doesn't work on Qosmio G20-127. Or should I be more specific it is not recognised at all, Media Center says there is not tuner hardware. I don't even know where would I install the driver, even if I had it. The only unrecognized device in device menager is 'Multimedia Video Controller'.
    Did anyone have this problem or maybe still does? What are my options? Besides going back to WIN XP MCE. :)

    So, I managed to find G30 driver for the TV tuner and installed it to 'Multimedia Video Controler'. And it seems to work. I downloaded the driver from toshiba's official site[url href=http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?macId=&mode=allMachines&userOS=& action=search&selCategory=2&selFamily=381&selSerie s=171&selProduct=627&selOS=26&selType=218&country= 52&language=13&search=]here[/url].
    Message was edited by: srdan

  • ITunes 7.4.3 doesn't work on Vista

    I've been battling with this problem for about a week now, and I've been looking everywhere for an answer to this, but I've found none.
    I upgraded iTunes from 7.4.2 to 7.4.3 last week, and restarted my computer when prompted. I tried opening it up...and it didn't work. Vista gave me the message that "iTunes has stopped working." Within the week, the only progress I made was plugging in my iPod to charge it (at which point, the same message popped up, but the error must've been slightly different because it let me send in an error report), and downloading Songbird so I could actually listen to my songs.
    Does anyone have any suggestions for me? I don't want to completely delete iTunes, but if worse comes to worse, I will
    Thanks in advance!

    My iTunes hasn't been working since July/August when Apple upgraded iTunes. I am able to open up iTunes but it freezes as soon as it is open. The only thing I know is you should install it by right-click and choose "run as administrator". Disable all the Internet security, anti-virus, and firewall software when you download or install.
    I haven't found any solution yet.

Maybe you are looking for