Jar file required to read excel-2007 file

Hi
could any one tell me where we can get jar file to read Excel-2007. i tried but i didn't get it,please send me the
URL to dowload jar files.
Thanks and Regards
Qaisar Jamal.

You wanted a link? So here you are:
http://apache.mirror.superhosting.cz/poi/release/bin/

Similar Messages

Jar files required to read excel file in SAP PI 7.3.1 sp09 dualstack

Hi experts,
I need to read excel file (.xls) using SAP PI and process it to target system. I have read blogs
and found that there are 2 ways to read an excel file in PI using file adapter.
1) Developing a custom adapter module
2) Using XSLT code.
So in order to develop a custom adapter module, i have followed the following blogs
**************** - XI - Step-by-step guide to develop Adapter Module to read Excel file
and
Excel Files - How to handle them in SAP XI/PI (The Alternatives)
and
http://wiki.scn.sap.com/wiki/display/ABAP/Adapter+Module+To+Read+Excel+File+with+Multiple+Rows+and+Multiple+Columns
I am unable to find the jar files in SAP PI at OS level as per the first blog(think they were obsolete).
Please let me know
1) What are the required jar files needed to read excel file and their location
2) Even if i use the old jar files as mentioned in the first blog can i achieve my requirement
3) Following this blog Convert incoming XML to Excel or Excel XML – Part 1 - XSLT Way if i apply the same logic at sender side, will it work? Because through case studies i came to know that we cannot read a .xls file using XSLT code. Correct me if i am wrong.
Looking for your valuable suggestions.
Regards
Shilpa

Hi Shilpa
Welcome to SCN!
The blog you refered to might be for previous versions of PI. You can refer to the following two wikis to find out what are the relevant JAR files for PI 7.3 and also how to get them.
XI libraries for development - Process Integration - SCN Wiki
Where to get the libraries for XI development - Process Integration - SCN Wiki
It also looks like for newer versions, you might not need to manually get and add those JAR files into your NWDS project - please refer to the first comment on the blog below. I have not tried it personally as I'm not using the latest NWDS, but you can try that first, and if it does not work, then go get them manually.
PI 7.4 - Adapter Module Creation using EJB 3.0
Do note that you should be using the JAR files that is corresponding to your PI server version.
As for your third question, that does not apply to you. XLS is the older non-XML format, and therefore cannot be read by XLST since it is in binary format.
Rgds
Eng Swee

Excel 2007 - Files will not open from outside of Excel 2007

Hello,
I'm a new user of Xcelsius 2008, in fact I just had it installed yesterday. The issue I've come across ever since the install, is when I attempt to open an Excel 2007 file from My Documents window (i.e Windows Explorer) a new instance of Excel will open, churn for a few seconds and then nothing...the file doesn't open nor is there a new workbook, all I see is a blank Excel screen.
I am however, able to click on Open within Excel, navigate to the appropriate location and open the file that way.
A couple notes: a) yesterday I also had Business Objects XI 3.1 installed yesterday, one of the options is "Enable Office Add-ins" I've tried to open files through Explorer with and without this enabled. b) When I try to open a file with Explorer, at the bottom of Excel I see: "Opening:EUROTOOL.XLAM" for a brief moment, and again, all I'm left with is a new instance of a blank Excel screen.
Any help would be greatly appreciated!
Thanks!
Chase K.

Hi Chase
Welcome to the forum!
Well its the newbie gotcha! The behavior is caused by Live Office compatibility mode. Go to File - Preferences - Excel Behavior and turn it off, disable it, uncheck it! Exit Xcelsius and restart.
You'll probably never have to use internal LO mode since the recommended workflow if you're using LO is to do it outside of Xcelsius anyway.
I know its hard to read all the info when you get a new product. But the initial LO compatibility screen you clicked through does warn about this.
And don't forget to update to the latest FP2, it'll save you posting about issues that have already been fixed.
Andy

Can't send Excel 2007 File via Send To Email Option after Acrobat Install

Normally, you can send an Excel 2007 file via email to someone by going to the Send option on the Excel file menu and choosing "Email." This will email an actual copy of the Excel 2007 file. However, since installing Adobe Acrobat 9 pro on my computer, this option, as well as the option to send to XPS are gone -- the only email option I have on that menu is to convert the file to a PDF and email it.
It seems to me that Acrobat should ADD options to menus but not remove any! Does anyone know how I can get those missing options (especially the one to email the actual file itself) back? I've tried Googling up a solution, but to no avail so far.
Thanks, in advance, for any help!
Laura

Thanks for taking the time to respond, Aditya!
I saw that MS support article when I was trying to solve this issue on my own, but the solutions it proposes won't work for me -- I can't set Outlook as my email client (this is a work computer and we use Lotus Notes) and I can't muck around in the registry (again, this is a work computer). I know I can attach the Excel via the attach command in the email client, but the main thing is I don't understand why Acrobat has removed that option from the Excel menu. Also, it removed the Send to XPS option (which I don't really care about, but it bothers me because it shouldn't be deleting anything)!
I even tried adding the Email command to the Quick Access Toolbar in Excel -- it let me add the button, but, when I click it, absolutely nothing happens.

Opening MS Excel 2007 files + Spotlight

Hey all,
A couple of quick questions.
1. Is there any way to open MS Excel 2007 files? I tried Neooffice and an XML converter (which I now understand can convert only .docx and .pptx files?)
2. Is there a spotlight widget? So I can run spotlight whilst pulling up my dashboard?
Please let me know!
Thanks in advance!
Cheers,
Mustan

Some quick answers:
1. No. (Unless you count MS Excel 2007 on Windows.) MS is "working on it."
2. Not that I know of. But I could be wrong.

Accessing Excel 2007-file from BO Explorer App

Hello all,
I have a problem when trying to access excel 2007-files in an InfoSpace ( XI 3.1 SP2) from the iPad with the BO Explorer App.
Accessing this file from the Browser is no problem and accessing the same file saved as excel 2003 is also no problem from the IPad.
Anybody an idea what could be the problem? I have to save some files with excel 2007 because number of rows.
Thanks in advance!
Regards,
Christian
Additional hint: Always the following error message appears:
It is not possible to retrieve the facets within the Explore tab.
org.xml.sax.SAXParseException:Character reference "&#26" is an invalid XML character.
Any idea? Thanks!
Edited by: Christian Hurth on Sep 9, 2011 2:35 PM

I do now see that you are correct: there is a difference between Excel 2007 and Excel 2010. Your particular usage is somewhat unusual and there probably isn't anything you can do, except to recognise that you are a beneficiary
of it (although others may be less fortunate).
The type of protection that you are applying protects the workbook against certain types of change; it does not prevent people opening it, and they do not need a password to open it, so, in a sense, it does not need to be
encrypted. In Excel 2007 (and Excel 2003 before it), the workbook was, nonetheless, encrypted, and in Excel 2010 it isn't.
This change means that someone can remove the protection outside Excel (just by deleting that single line of XML), something that couldn't be done before so it is a loss of security.
I'm a Word person, rather than Excel, and I don't know all the details of the different types of 'protection' that can be applied to Workbooks and Sheets.
I have, however, not seen anything about this before and will ask some Excel friends if they know anything. Beyond that I don't think I can help any more.
Enjoy,
Tony
www.WordArticles.com

Reading office 2007 files on my curve 8900

Hi
I have recently been provided with a curve 8900 by my company. I can read office 2003 file e.g. .ppt but not office 2007 files e.g. .pptx
does anyone know if I can do this please and if so how

I was wondering whether there is anyway of getting a 512mb or 1gb graphics card into the new iMac?
Sorry but no, there isn't.
Does anyone know how I can open docx files or any other Office 2007 files on Microsoft Office for Mac 2004
Try Microsoft's Open XML File Format Converter

File Adapter and reading all XML files from direcotry

Problem occurs on PI 7.1
I defined sender file adapter. File name mask is: "*.xml" to read all XML messages from directory.
Quality of service is: Exactly One.
Poll Interval: 30
Retry interval: 30
Processing mode: Archive with option "Add Timestamp".
Processing sequence: by name.
I though that with above configuration my File Adapter will be reading folder for all coming XML files. But somehow it is reading XMLs only when I'm activating it in Integration Builder.
Any idea what can cause such strange problem?

Hi Tomasz,
As per my understanding, you need to activate the file adapter for reading the XML files on your directory. Right?
If that is the case, then the issue might be with the Cache.
1. Clear the cache from the Integration Builder.
2. Check in SXI_CACHE whether there are any issues. Click on Delta Cache refresh to find out if there are any cache related issues.
Thanks,

How to make restoration of corrupted excel 2007 file?

Hi there,
When I open an excel file the following error message is displayed: “The file may be corrupted, located on a server that is not responding, or read only”.
Since this happened whenever I open any excel file, the above error message is again displayed, I must also mention that I am sure my files are not read-only and the files are stored on my hard disk and I use VM ware and my OS is windows server!
How can I solve this problem?

You may copy the file to another computer with Excel installed, and open it. If the error still exist, then your file is corrupt. Otherwise, there may be some problems with your Excel in the original computer and you need to uninstall/reinstall Excel.
If the file is corrupt, then you can try several methods to recover it:
1. First of all, you can try to repair the file manually in Excel, as follows:
(1) On the File menu, click Open.
(2) In the Open dialog box, select the file you want to open, and click the arrow next to the Open button.
(3) Click Open and Repair, and then choose which method you want to use to recover your workbook.
You may find more information about this at:
http://office.microsoft.com/en-us/ex...001034656.aspx (for Excel 2003)
http://office.microsoft.com/en-us/ex...017.aspx?CTT=1 (for Excel 2007)
http://office.microsoft.com/en-us/ex...840.aspx?CTT=1 (for Excel 2010)
http://office.microsoft.com/en-us/ex...554.aspx?CTT=1 (for Excel 2013)
2. If method 1 fails, there are still several methods to recover your Excel file manually with Excel, including writing a small VBA macro, as below
http://office.microsoft.com/en-us/ex...#_Toc337637262
3. Third, there are also free tools from third-parties that can open and read Microsoft Excel files, for example,
3.1 OpenOffice at http://www.openoffice.org. This is a very famous open source project that is designed to support Office file formats, including Excel files. The software can run under Windows.
3.2 KingSoft Spreadsheets at
http://www.kingsoftstore.com/office/free-excel. This is a free Windows tool that can open Excel files.
3.3 Google Drive at https://drive.google.com/ also support to load Excel files.
Sometimes when Excel fails to open your file, these tools may be able to open it successfully. If that is the case, then after the Excel file is opened, you can just save it as a new file which will be error-free.
4. For xlsx files, they are actually a group of files compressed in Zip file format. Therefore, sometimes, if the corruption is only caused by the Zip file, then you can use Zip repair tools such as WinRAR at
http://www.rarlab.com to repair the file, as follows:
4.1 Assuming the corrupt Excel file is a.xlsx, then you need to rename it to a.zip
4.2 Start WinRAR, go to "Tools > Repair Archive" to repair a.zip and generated a fixed file a_fixed.zip.
4.3 Rename a_fixed.zip back to a_fixed.xlsx
4.4 Using Excel to open a_fixed.xlsx.
There may still be some warnings when opening the fixed file in Excel, just let ignore it and Excel will try to open and repair the fixed file. If the file can be opened successfully, then you can just save the contents into another error-free file.
5. If all above methods do not work, then you may try third-party tools such as DataNumen Excel Repair at
http://www.datanumen.com/excel-repair/
I have used it to recover some Excel files successfully. It provides a free demo version so that you can try to see if the data you want can be recovered or not.
Good luck!

Excel 2007: file opened by another user

Hi guys. Help me to hunt down a question.
Then I am trying to open or save a spreadsheet in excel 2007 it always shows me a downloading status bar without any progress. After few minutes the file opens or not. Game of chance. When it didn`t open I get this error message "file
opened by another user".
I should notice that I have windows 7, office 2007. I tried to transfer some files to another pc and at first it`s working good, without any troubles, but then still the same problem. Pops up a dialog window with the message. It happens
on network files only. Of course I have tried to run excel in a save mode and in compatibility mode. But nothing change.
Give me please any clue what can it be and how can I fix it?

Try this. Excel Options, click Advanced at the left side of the dialog window. Then make sure that DDE is selected. By this you make enable the Ignore Other Applications that use Dynamic Data Exchange feature.
And also try the following: open Tools – Folder options. In the list of the file types choose XLS. Then click the Advanced. Select Open. The Application Used to Perform Action box contains the actual command line used to start Excel.
You should add in this field a space followed by "%1". Be sure to include the quotes. And deselect Use DDE. That’s all steps you should do.
Also you can solve this issue with help of third-party program. This is good one, try it - Recovery Toolbox for Excel
https://excel.recoverytoolbox.com/
In principle, this is all that i can reccomend.

Excel 2007 file *.xlsx

I use Crystal XI, what I do to conect to my database is just click on "creat a new conection" and click on "access/excel (DAO)" then browse to pick my file, It has been working with no problems but I just changed my excel version from 2003 to 2007, and It is giving me the following error
LOGON FAILED.
DETAILS : DAO ERROR CODE 0xcca.
SOURCE :DAO Workspace.
DESCRIPTION : EXTERNAL TABLE IS NOT IN THE EXPECTED FORMAT"
This is happenning when I try to create a new report.
I have also tried with "ODBC(RDO)" I select the data as "Excel files" click on finish, select the file, click "OK", but it shows in the tree below "ODBC(RDO)" an "Excel Files" directory and "Add command" ..... I can't connect to my data table
Can anyone please help me??

Can you check Note 1010935 - Can you increase the number of rows for an export file?
Symptom
Is it possible to increase the maximum number of rows used in an export?
Solution
Yes, it is possible to increase the maximum row limit used in an export.
For hosted customers, please contact Support who will be able to change this on your behalf.
For On Premise customers, you need to log into the application using the "system" login. The property can be found by going to the following:
Setup / System Setup / Configuration / select System Properties from the drop down list and find the property system.ResultSet.maxNumberRowsExported
The description on this property is as follows:
Maximum number of rows in a query result set which may be exported to PDF, Excel, or CSV before the operation is prohibited. This is also used to limit the size of a result set being produced by a scheduled report task.
Please note that Excel also has some limitations on the maximum number of rows, therefore you may still experience a limit to 65K (which was the Excel Limit in Excel97 - Excel 2003). Therefore if you export to excel and your limit is higher than 65K, you will still only see 65K of records. The reason for this is that the open source Apache POI that is used to do the export has not been updated to support Excel 2007 which has a higher limit
Thanks

Photos not showing up when I make PDFs from Excel 2007 files

I make lists for my newspaper. I am working from home today where I use Excel 2007 and Adobe Acrobat Pro 9. I had to tweak my home Adobe settings to mimic ones I use at work for our newspaper's printer, but other than that, I am doing what I normally do to my files. At work I have Excel 2003 and Adobe 8. I am not sure if it is pro or standard. I use Windows in both locations.
When I go to make the PDF on my home comp, the photos do not show up on the PDF. They print fine from the Excel file. Does anyone have an idea why this might be happening? Thanks!

A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
LN

Sener file adapter has read/pick the files first in first out method.

HI
In my Interface I am Using Sender as File adapter. As per my requirement Sender file adapter has to read the file from file directory. This directory having 1000u2019s of files with some files are same name (time stamp is different) and some files are different name here file adapter has to pick the file with mentioned name in File sender adapter like ZMPSMSGSTATUSMST-.xml .
But source file name is like <TABLENAME>-<TIME_STAMP>.XML (ZMPSWRKFLOWHIST-20090527-150522-628) in file directory.
The file adapter in XI will poll to this directory and picks the file in first- in first-out by sorting according to timestamp.
To do this configuration what I have to do in sender file adapter please give me your valuable inputs.

HI Abhi,
Thank you for your spot replay.
I tested now but i am geting below error.
Putting message into send queue failed, due to: com.sap.aii.af.ra.ms.api.DuplicateMessageException: Message ID f4ca4f86-9c5d-4bdd-1fb1-a6bd7cda99a8(OUTBOUND) already exists in database: com.sap.sql.DuplicateKeyException: [NWMss][SQLServer JDBC Driver][SQLServer]Violation of PRIMARY KEY constraint 'PK__XI_AF_MSG__491A1D0B'. Cannot insert duplicate key in object 'dbo.XI_AF_MSG'..
Could not archive file 'E:\file\in\ZMPSMSGSTATUSMST-20090527-150522-628.xml' after processing
but i am able to see this file in Archive foleder. once file is archivied sucessfully the same file is delted from source directory?
I given processing parametes queue name is TEST.
Thanks
srinivas
Edited by: srinivasreddy p on May 28, 2009 8:43 AM
Edited by: srinivasreddy p on May 28, 2009 8:52 AM

File Adapter to read from remote file server query

Hi all,
I want a SOA 11g application to read files on remote server using File Adapter. Is it possible to configure the File Adapter to read from remote location instead of locally. Is it possible. Is yes where can I find the associated remote file configuration documentation.
Thanks
Edited by: user5108636 on 19/09/2010 19:49

I also changed one more properties the FTP connection factory called serverType=win. I get bits and pieces in each document. Is there any working example to connect to an FTP server running on Windows using Ftp Adapter. Still not working.
These are the error logs related to it. Please suggest
####<Oct 12, 2010 1:17:22 PM EST> <Info> <Common> <server_name> <WLS_SOA> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <46e7c258a0e5cad6:-145e5cdb:12b99475c2b:-7ffd-0000000000046afa> <1286849842995> <BEA-000628> <Created "1" resources for pool "eis/Ftp/FtpAdapter", out of which "0" are available and "1" are unavailable.>\
[2010-10-12T12:56:07.142+11:00] [WLS_SOA] [NOTIFICATION] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@170e13a9] [userId: weblogic] [ecid: 0000IiTsVSi9xWD_n91FiZ1CfLfc00006s,1:24709] [APP: soa-infra] [dcid: 46e7c258a0e5cad6:f9faea1:12b852b7f0f:-8000-00000000000005ed] FTP Adapter FetchAvlFiles Recovery still not possible after 1500 attempts due to javax.resource.spi.IllegalStateException: [Connector:199176]Unable to execute allocateConnection(...) on ConnectionManager. A stale Connection Factory or Connection Handle may be used. The connection pool associated with it has already been destroyed. Try to re-lookup Connection Factory eis/Ftp/FtpAdapter from JNDI and get a new Connection Handle.
Thanks
Edited by: user5108636 on 11/10/2010 19:05
Edited by: user5108636 on 11/10/2010 19:22

Multiple File Location in Read operation in File Adapter.

Hi,
I am using File Adapter for Read operation. Normally we would make a Logical Directory for reading files at that location. But I have come up with a scenario where we need to read file from 6 different File locations.
Is there any way that the same BPEL process can read file from 6 different locations.
OR
Do I need to make 6 BPEL processes to read file from 6 different locations.
I am using Oracle SOA 10.1.3.4 and JDeveloper 10.1.3.4.
Will really appreciate if someone can help in this regard.
Thanks for the needful.
Cheers,
Varun

Hi Oracler,
Thanks for your reply.
As suggested, the BPEL process with six different file adapters for six different directories and put them on each of the six branches of the pick activity. Will there be any performance oriented issues if you use six adapters for polling at 6 different locations??
Also, the other solution that you have provided from this link Re: Can we have dynamic folder for Polling in BPEL works fine. One of a problem that I encounter while using this solution is that everytime you do any chnages in your BPEL process, the entries from bpel.xml are missing.
Thanks for the needful.
Cheers,
Varun

Jar file required to read excel-2007 file

Similar Messages

Maybe you are looking for