Jar files with oracle jdeveloper

Hi, wondering where in jdeveloper do you go and select where to link to .jar files?
thanks

I've observed this problem with certain AV tools. Some fare much better than others (inside Oracle, we use Symantec AV and I see very little slowdown even when it's scanning jar files in jdev's install directory).
You didn't mention which version of jdeveloper you're using. Assuming 10.1.3 preview, the directories to exclude from scanning would be either the whole of your jdev install directory, or if you must be more selective, something like:
%JDEVHOME%/jlib
%JDEVHOME%/jdev/lib
%JDEVHOME%/ide/lib
%JDEVHOME%/jdev/extensions
%JDEVHOME%/lib
Would be a good start. These directories contain the bulk of the jars loaded at IDE startup.
Thanks,
Brian

Similar Messages

Package jar files with the jdeveloper extension

I have some dependent 3rd party jar files that needs to go with the extension. How can I package it with the extension?

DJ,
If you're still using 11.1.1.5 (or any version of 11gR1) place the third party libraries into a directory in your project, and reference them via the classpath entry in the extension.xml file.
If you are looking at how you can distribute them with your extension, but not put them inside the extensions .jar file, then put them read this blog post about how to bundle your extension for distribution.
http://blogs.oracle.com/jdevextensions/entry/working_with_jdeveloper_update_centers_and_bundlexml
If you are adding external libraries to an extension in 11gR2, there is a blog post about that:
http://blogs.oracle.com/jdevextensions/entry/adding_exteneral_jars_to_an
--jb

Executable Jar files with Oracle drivers and Oracle classes

I have a program which works perfectly that is used to do file
maintenace on an oracle table. Now I am ready to make this into
an executable jar file. I know how to do this, but my problem is
now how do I get the Oracle classes into my jar? I think they
are all in classes12.zip, but just adding classes12.zip into the
jar doesnt work. I still get an error when running the program
that says it can't find oracle.jdbc.drivers.oracledriver.
You can use the jar command to add all classes in a directory,
but this doesnt work either.
Has anyone out there ever done this? Please help if you know how
to do this. How do you put the oracle classes into you
executable jar file?
Wah!!!

Me again. I forgot to mention that I am only using Java. We
don't have Oracle forms or jdeveloper. This is just straight
java. Everything worked until I tried to executable jar creation.

How can I get a single jar file with NetBeans?

How can I get a single jar file with NetBeans?
When I create the project I get these files:
dist/lib/libreria1.jar
dist/lib/libreria2.jar
dist/software.jar
The libraries that have been imported to create the project are in separate folders:
libreria1/libreria1.jar
libreria2/libreria2.jar
libreria1, libreria2, dist folders are all located inside the project folder.
I added the following code to the build.xml:
<target name="-post-jar">
<jar jarfile="dist/software.jar">
<zipfileset src="${dist.jar}" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
<manifest>
<attribute name="Main-Class" value="pacco.classeprincipale"/>
</manifest>
</jar>
</target>
Of course there is also the project folder:
src/pacco/classeprincipale.form
src/pacco/classeprincipale.java
Can you tell me what is wrong? The error message I get is as follows:
C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)

This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java

Error during deploying mapbuilder.jar file in oracle application server

hi all,
Iam trying to deploy mapbuilder.jar file in oracle 10g enterprise manager oc4j environment. It is giving an error that
" An error occurred when processing the data submitted. Find the appropriate field and enter the correct information as noted next to each field.
Archive Location - Failed in uploading archive. Invalid archive file: Unsupported archive type. unknown'
i have deployed in the same way for mapviewer.ear. It was successfully deployed.
plz any body tell me what would be the reason. I there any other way to deploying .jar file in oracle 10g enterprise manager
thnx in advance...
Regards,
srinivas

Hi Srinivas,
There is no need to deploy MapBuilder in an Application Server. You can start it at the command line with for example:
java -jar mapbuilder.jar -noconnect
Joao

Packaging jar file with classes

Hi experts,
I want to clarify a problem in relation with packaging .class files in jar file making
it jar executable.I was able to achieve this when number of classes are limited and confined to only a single program.However recently i developed a software
which is very much like SQL*Plus and retriee my company database using screen buffer management and i have handled almost all the issues.
But so long to execute this program i am typing
java <Program name>.It is using Oracle as backend.
I tried to package Oracle driver files in jar using
jar -cmf manifest.mf sqlpad.jar *.class Oracle\
where Oracle directory contains all the class files in separate folders like
Oracle\javax etc
I get a jar file with hefty MBs size.It is executable too.But when i try to connect to
database, i get message Oracle driver class is not found.
In what way should i package it as jar file ?

I wouldn't add the drivers to the JAR itself. Instead, I'd suggest one of the following:
1.) Add classpath entries into your manifest file pointing to the drivers' JARs
2.) Create a batch file for starting that contains a call to "java -classpath ..."
3.) Add some way to your app to configure additional classpaths at runtime and use a URLClasssLoader (and a wrapper class for the driver for registering with the DriverManager) that loads the driver's class

How to handle 2 or more .jar files with an applet

Hey out there
I have created an ftpClient application that uses "jakarta ftpClient". It works fine as an JFrame application � But when I converted the Application into an JApplet I get the following Exception:
java.lang.NoClassDefFoundError: org/apache/commons/net/ftp/FTPClient
I have bundled the main application into a .jar file (Application,jar). But I don't know how to handle the 2 jakarta .jar files with my JApplet??
I Tried to append the 2 jakarta .jar files to the Application,jar with the following code:
jar cvf Application.jar 1.class 2.class�. commons-net-1.4.1.jar jakarta-oro-2.0.8.jar
But with the same result / Exception (I have signed the Jar file!)
Can anyone help me

Hi i have a question with your application can you down- or upload more files at the same time? Because i'm having problems with my ftp application.
Here is the link with my problem maybe you can help me. I will be very pleased when you can help me.
http://forum.java.sun.com/thread.jspa?threadID=5162042&tstart=0
Thx
Satanduvel

ServiceBus java callout - how to pack the JAR file with libraries?

Hello
I want to use a Java Callout from a Service Bus flow.
What is the correct way to pack the JAR file with its nessecary libraries?
I tried different methods to pack my JAR, but yet, as though the Java runs perfectly from the Workshop (Eclipse) , when I am trying to use the exported Jar on the ServiceBus flow, it fails with an ClassNotFoundException.
I would really appreciate your advice here.
Thanks
Koby

Well.. Looking inside my exported JAR file, I got all of the files there inside, including the jar file containing the library.
What I'm trying to do is run a simple java program that connect through SSH and therefore use an SSH library.
On the workshop I got it as an imported library JAR. And it works perfectly there.
Any idea?
Here's the complete error I get:
<BEA-382515> <Callout to java method "public static java.lang.String sshpackage.SshProg.remoteScriptInvoke(java.lang.String,java.lang.String,java.lang.String,java.lang.String)" resulted in exception: null
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at stages.transform.runtime.JavaCalloutRuntimeStep$1.run(JavaCalloutRuntimeStep.java:158)
Truncated. see log file for complete stacktrace
java.lang.NoClassDefFoundError: ch/ethz/ssh2/Connection
at sshpackage.SshProg.remoteScriptInvoke(SshProg.java:29)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: ch.ethz.ssh2.Connection
at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at com.bea.wli.sb.resources.archive.HookedJarClassLoader.loadClass(HookedJarClassLoader.java:251)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
Truncated. see log file for complete stacktrace
Edited by: kobyssh on 04:12 01/02/2010

Display blob file with oracle forms

I need to display an image file with oracle forms.
can any body tell me how to do this ?
Thanks

How to do this is dependent on which version of Oracle Forms you are using. Please let us know what version (eg; 10.1.3.x.x not 10g) of Oracle Forms you are using and how your application is deployed (Client/Server or web). If web, what is your Java version?
Craig...

How to run jar files with arguments?

Hi everybody,
Is it possible to run a jar file with arguments passed to its MAIN class?
If yes can you help me on how to do it?
Thanx

I am in complete agreement with FahleE. I'll refine it a bit.
On my machine (running RedHatLinux8.0) you can run the demos like this.
1. open a console window
2. go to the directory where the demo you wish to run, say, demo.jar, is located
for instance for the SwingSet2-demo
cd /usr/lib/java/demo/jfc/SwingSet2
3. run the jar file
java -jar demo.jar
In order to run it windows style, ie, launching by double clicking, save these lines in a file called
LaunchJar.sh
cd /usr/lib/java/demo/jfc/SwingSet2
java -jar demo.jar
where demo.jar is the jar file you want to run.
Right click on the LaunchJar.sh and go to the 'Properties' tab. Check the 'Execute' permissions for Owner/groups/others. You can also do the same thing by chmod command.
Now double-click on the LaunchJar.sh file: your application should be launched.
Palash.
Please Note: It is important to set the path variable to your JAVA_HOME directory....
Otherwise, instead of
java -jar demo.jar, you will need to use the full path to your JAVA_HOME/bin directory like:
JAVA_HOME/bin /java -jar demo.jar.
Where JAVA_HOME is the directory where you have installed java. Typically it is usr/java or usr/local/java

Where does one find the jar file for oracle.forms.[ui/pjc/...]

Hello,
I'd like to run some of the forms samples on technet, but I don't seem to have the jar file containing oracle.forms.[ui/pjc/...]. Does anyone know here I can find it?
Thanks
Eric Kamradt
[email protected]

Hi,
Check out the "download" link at the following address.
http://cougaar.org/cgi-bin/viewcvs.cgi/jars/lib/jbcl.jar?cvsroot=core
Hope that help,
Jack

Update jar file with modified class files

hi all,
I'm developing a jar utility for updating a jar file with modified class files as of now i have reached a point where in i can browse files and set it to required location
i.e i have developed a swings GUI application using JfileChooser and browse the files ..now my requirement is to update the jar files with modified class file
GUI looks like below
....enter the modified class file ----> d:\c.class
....enter the jar file path ---> d:\a.jar
                                                      update button now i have the requirement as
1> when i click on the update button ,my jar file (a.jar) should get updated with the latest class file (c.class)
can u help me to achieve this requirement.???
im stuck with this,,,if u can provide me wit the code for updating jar file with latest class file...it will really be helpful
if u can help me with the code on click on update button it will be really helpful
Thanks and expecting a faster response from u all java experts....

Please find my query in bolds...i have written the partial code now,i need some help now
hope u guys can help me out...
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.File;
public class FileExplorer extends JDialog implements ActionListener
     JTextField txtLocation_class;
     JButton btnBrowse_class;
     JLabel label_class;
     JTextField txtLocation_jar;
     JButton btnBrowse_jar;
     JLabel label_jar;
     JButton updatebutton;
     public FileExplorer()
               setSize(600,300);
               //for class files
               label_class = new JLabel("Please select Modified Class File");
               txtLocation_class= new JTextField(20);
               btnBrowse_class = new JButton("Browse");
               btnBrowse_class.addActionListener(this);
               //for jar files
               label_jar = new JLabel(" Please select the Jar file");
               txtLocation_jar= new JTextField(20);
               btnBrowse_jar = new JButton("Browse");
               btnBrowse_jar.addActionListener(this);
               ActionListener updateListener = new ActionListener(){
                public void actionPerformed(ActionEvent ae){
                 if(ae.getActionCommand().equalsIgnoreCase("Update")){
                  System.out.println("ae.getActionCommand() :: "+ae.getActionCommand());
                  System.out.println("Update Button is pressed");
                *//Query :how do i access FilePath and FilePath1 here which*
*                // has been set in public void actionPerformed(ActionEvent ae)*
*                //method below*
*                // FilePath ---??*
*                // FilePath1 ---??*
*                // how do i access the above 2 parameters*
*                //Query :on click of update button i have to pass*
*                //two parameters FilePath and FilePath1 to*
*                //perform some functionality. please help me*
*                //to achieve this..how do i access Filepath and Filepath1*
*                //here which has been set below.*
                 } // end of if
               } // end of actionPerformed
            };// end of ActionListener
              updatebutton = new JButton("Update");
              updatebutton.addActionListener(updateListener);
               //adding to the panel
               JPanel pnl = new JPanel();
               pnl.add(label_class);
               pnl.add(txtLocation_class);
               pnl.add(btnBrowse_class);
               pnl.add(label_jar);
               pnl.add(txtLocation_jar);
               pnl.add(btnBrowse_jar);
              pnl.add(updatebutton);
               getContentPane().add(pnl);
     public void actionPerformed(ActionEvent ae)
          Object obj=ae.getSource();
          if(obj==btnBrowse_class)
               final JFileChooser fcstudent = new JFileChooser();
               int rtrnval = fcstudent.showOpenDialog(this);
               if(rtrnval==JFileChooser.APPROVE_OPTION)
                    try
                         File file=fcstudent.getSelectedFile();
                         String path = file.getPath();
                         System.out.println("This is Path:"+path);
                         txtLocation_class.setText(""+path);
                         String FilePath=txtLocation_class.getText();
                         System.out.println("FilePath is ::"+FilePath);
                    catch(Exception ex)
                         ex.printStackTrace();
          }else if(obj==btnBrowse_jar){
                         final JFileChooser fcstudent = new JFileChooser();
                         int rtrnval = fcstudent.showOpenDialog(this);
                         if(rtrnval==JFileChooser.APPROVE_OPTION)
                              try
                                   File file=fcstudent.getSelectedFile();
                                   String path1 = file.getPath();
                                   System.out.println("This is Path:"+path1);
                                   txtLocation_jar.setText(""+path1);
                                   String FilePath1=txtLocation_jar.getText();
                                   System.out.println("FilePath is ::"+FilePath1);
                              catch(Exception ex)
                                   ex.printStackTrace();
     public static void main(String arg[]){
               FileExplorer Exm= new FileExplorer();
               Exm.setVisible(true);
}

How do you create a jar file with txt and classes?

Hey, I'm trying to create code to create a jar file with a text file, but I can't figure out how to add the text file. Here is what I have so far:
try {
            // Name of jar file to write
            String archiveFile = "test.jar";
            Manifest jman = new Manifest();
            try {
                // Create a manifest from a file
                //InputStream fis = new FileInputStream("manifestfile");
                //Manifest manifest = new Manifest(fis);
                // Construct a string version of a manifest
                StringBuffer sbuf = new StringBuffer();
                sbuf.append("Manifest-Version: 1.0\n");
                sbuf.append("Ant-Version: Apache Ant 1.7.1\n");
                sbuf.append("Created-By: 1.5.0_19-137 (Apple Inc.)\n");
                sbuf.append("Main-Class: Main\n");
                sbuf.append("Class-Path: lib/swing-layout-1.0.3.jar\n");
                sbuf.append("X-COMMENT: Main-Class will be added automatically by build\n");
                // Convert the string to a input stream
                InputStream is = new ByteArrayInputStream(sbuf.toString().getBytes("UTF-8"));
                // Create the manifest
                jman = new Manifest(is);
            } catch (IOException e) {
            FileOutputStream stream = new FileOutputStream(archiveFile, true);// archive file is jar file name
            JarOutputStream out = new JarOutputStream(stream, jman);
            out.putNextEntry(new JarEntry("test.txt"));
            out.closeEntry();
            out.close();
        } catch (Exception ex) {
        }It creates the .jar file with the correct manifest but I can't get it to write the test.txt or anything else into the jar file.
-Gandolf
Edited by: GanMatt on Jun 18, 2009 8:18 AM
Edited by: GanMatt on Jun 18, 2009 8:19 AM

Alright, my question has changed. Here's the code:
try {
            // Name of jar file to write
            String archiveFile = "test.jar";
            Manifest jman = new Manifest();
            try {
                // Create a manifest from a file
                //InputStream fis = new FileInputStream("manifestfile");
                //Manifest manifest = new Manifest(fis);
                // Construct a string version of a manifest
                StringBuffer sbuf = new StringBuffer();
                sbuf.append("Manifest-Version: 1.0\n");
                sbuf.append("Ant-Version: Apache Ant 1.7.1\n");
                sbuf.append("Created-By: 1.5.0_19-137 (Apple Inc.)\n");
                sbuf.append("Main-Class: Main\n");
                sbuf.append("Class-Path: lib/swing-layout-1.0.3.jar\n");
                sbuf.append("X-COMMENT: Main-Class will be added automatically by build\n");
                // Convert the string to a input stream
                InputStream is = new ByteArrayInputStream(sbuf.toString().getBytes("UTF-8"));
                // Create the manifest
                jman = new Manifest(is);
            } catch (IOException e) {
            FileOutputStream stream = new FileOutputStream(archiveFile, true);// archive file is jar file name
            JarOutputStream out = new JarOutputStream(stream, jman);
            out.putNextEntry(new JarEntry("test.txt"));
            out.write("Hi".getBytes());
            out.flush();
            out.closeEntry();
            out.close();
        } catch (Exception ex) {
            JOptionPane.showMessageDialog(this,ex.toString(),"BUG!",JOptionPane.INFORMATION_MESSAGE);
        }It creates the jar file with the txt file inside it, but I can't write "Hi" inside of the text file. Any ideas?
-Gandolf

Exporting a jar file with its libraries

Hi there,
I have problem while exporting jar files with Eclipse.My program uses db2driver libraries and i want to make stay these library files while exporting the main program but there is no choice to make it like that. And when i execute my program jar file it throws a class not found exception for db2drivers ...
How can i pack the jar files with my program jar?
Thanks for help.

Hi Peter,
I made the changes but still got the problem...
here is my .classpath file:
<?xml version="1.0" encoding="UTF-8"?>
<classpath>
<classpathentry kind="src" path="src"/>
<classpathentry kind="con" path="org.eclipse.jdt.launching.JRE_CONTAINER"/>
<classpathentry exported="true" kind="lib" path="db2jcc_license_cu.jar"/>
<classpathentry exported="true" kind="lib" path="db2jcc.jar"/>
<classpathentry kind="output" path="bin"/>
</classpath>
when i execute my jar file it throws a ClassNotFoundExeption for DB2Drivers which are in db2jcc.jar ...(my startng class is at src package)
Thanks..

Can't run .jar file with JavaSE

Hello.
I'm trying to run a .jar file with JavaSE Binary, just like I did with Windows. I Ctrl+Rclick and pick "Open with..." and there is no such option. I've been searching the whole day for a solution, I kept getting "Open Java Preferences... put on top of the list" and things like that. There is no "Java Preferences" in the Utilities folder, and nothing related to my problem in "Java Control Panel" in System Preferences. Yes, I have Java 7. I just need to run this file with Java. How?
Thanks in advance.

Max. allowed size of .jar file is 1MB.

Jar files with oracle jdeveloper

Similar Messages

Maybe you are looking for