Java 1.4.2 install crashes Win2K system

I am trying to install Java 1.4.2 on a Windows 2000 Pro, Service Pack 4 system with IE 6.0 SP1. At the end of the installation, the system becomes completely unresponsive and requires a hard reboot.
This occurs whether I attempt to install the JRE or the SDK, and whether I try to install directly from the Web or download the .exe first and try to install from the local disk. I am trying to install the latest (1.4.2_03), but the same thing happens when I try previous versions of 1.4.2 also.
I have tried this many times, always with the same result. I have uninstalled the old version, shut down ALL unnecessary services (including antivirus), and even run Windows Update to make sure I have all the latest patches, etc. from Microsoft.
The installation appears to move along just fine until the very end. The GUI shows the message "Finishing installation, please wait. This may take several minutes." The busy icon (hourglass) appears and disappears several times, but after a minute or two, all activity appears to stop and the system locks up. I have waited up to 20 minutes for the system to come back, but it never does.
Any ideas?

The Windows Installer Service does not work in Safe Mode.

Similar Messages

Error while Installing the Java Add-In for an Existing ABAP System

Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran Chebrolu

Hi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag

Installing Java Add-In for an existing ABAP System -Error SQL compatibility

Hello gurus,
We have a system and it has only the ABAP instance! So my goal is install the JAVA iinstance. In this momment I´m reading the section "4.4.2 Installing the Java Add-In for an Existing ABAP System (Optional)" in installation guide "SAP ERP 6.0 SR3" (ABAP+JAVA). So, I want to install the JAVA instance which is the Java Add-In for an existing ABAP system!
So what I did was followed that instructions on that section in guide!
As you certainly know this process has three sequential phases:
1) Central Services Instance (SCS) Java Add-In
2) Database Instance Java Add-In
3) Central Instance Java Add-In
The first phase - Central Services Instance (SCS) Java Add-In - it already finished with success, but I´m faccing with a weird error in second phase Database Instance Java Add-In when I entered all required input parameters, SAPinst shows an error that says:
The database PRD has the wrong compatibility level. The database used for the installation of an SAP system must have compatibility level: 80 for MS SQL Server 2000 90 for MS SQL Server 2005 SOLUTION: See the MS SQL Server documentation on how to set the compatibility level for a database.
I don´t know what´s happen, in fact my database is an SQL Server 2008 (100), but I already change it at management studio, the compatibility level to MS SQL Server 2005, but still the error remains!!! I also tried to ran again the sapinst process, I restarted it but it still show me this error!!
Can you tell me why and how can I solve this problem?
Best regards,
João Dimas - Portugal

Hello Sunny,
I still have this error... I don´t know what do to more for this situation!
I found one not which report this error of compatibility - Note 1152240 - Setting Up Microsoft SQL Server 2008 (R2) - in chapter "VII TROUBLESHOOTING" which said to follow the instructions in chapter III - "Installing SAP systems based on SAP NetWeaver 7.0 SR3".
When I read this last chapter (III) it tell us to do:
If you want to install an SAP system based on SAP NetWeaver 7.0 SR3 on SQL Server 2008, you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace. Instead, you have to do the following:
Patch your runtime libraries by applying the procedure that is described in note 684106 for your release and machine architecture.
Use a modified Installation Master DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Installation Master DVD".
Use a modified Kernel DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Kernel DVD".
I did everything that is said in the note (except the "Creating a modified Kernel DVD") because I can not access to the note 1480785 (it say: "The requested SAP Note is either in reworking or is released internally only")
Can you help me... can you guide me... please!?
Best regards,
João Dimas - Portugal

Installing the Java Add-In for an existing abap system

Hi, Currently we are Installing the Java Add-In for an existing abap system.
Following the steps (Installation guide):
1) We sucessfully installed the Central Services Instance (SCS)
2) We sucessfully Installed the Database Instamce Java Add-In
Our problem comes in the third step
3) Central Instance Java Add-In
When the system prompts me the SAP System Identification (Select the central instance of your local host).
I have a combo with two values: DVEBMGS00 of SAP System DEV and DVEBMGS00 of SAP System DEV
(The same value)
I chose anyone, and click next.
The system send me an Input error and says "Caught EKdException in Module call: single select return more than on row"
Any help is appreciated, and I will reward points if helpful.
Regards

I followed an advice made for a sap consultant, and delete some profile files.
I had the following files
DEFAULT.1.PFL
DEFAULT.2.PFL
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_DVEMGS00_bsomtymx005.BAK
DEV_SCS01_bsomtymx005
START_DVEBMGS00_BSOMTYMX0
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
after to delete the files, I have the following files
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_SCS01_bsomtymx005
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
Then, I restarted the installation, and the sapinst allow me to continue with the installation.
I really do not know if the installation will be sucessful, but this issue is solved.
Thanks shanji, I was working in another tasks, but with your help, I will try to resolve again this problem, and found the solution.

Why does firefox 7 crashes the system if Quadro NVS 135M graphics driver is installed?

Why does firefox 7 crashes the system with a Quadro NVS 135M graphics cards installed?
It happens immediately after opening Firefox on a two screen system. You get a message saying the Graphics Driver stopped responding, but that it managed to recover, but after a while the system freezes completely. You can't even CTRL+ALT+DEL.

I get this too on with my nVidia GTX460 card. In my case the screen goes black. It happens once every few days, and for a while I could not figure out why. I was forcing a shutdown to get the screen back.
But I put the computer to sleep and woke it up, since that restarts the video, and this let me see what was wrong. The only error message is it reports that Firefox hung. There is nothing else in the Event logs.
I'm running Windows 7 with all the updates from Windows Update, and my video driver is 285.62, but his also happened with the 260.26 driver.
I imagine this is happening a lot, but people aren't able to isolate the cause.
I'm looking for a fix, not a bypass.

Windows XP crashes and system restarts when I try to open Itunes 6

I tried to ask the people at Apple support what was going on. But they didn't seem to know. My system restarts when I try to open Itunes. It does it with the factory software I recieved with my 5g Ipod Video. It also does it with any updated version I install. If I reinstall Itunes the program works fine for about a day. Then it crashes my system again. Please help. I don't want to reinstall Itunes everyday in order to use it.
compaq Windows XP

Now I have the blue screen and this is the error message.
* stop: 0x00000050 (0XBB9EA29E,0X00000000,0X8057DA81,0X00000002)
hmmmm. okay ... do you have an early version of Roxio CD Creator 5 installed on that PC?
i've seen this show up a few times. one of the early versions of Easy CD Creator 5 actually isn't compatible with XP:
Easy CD Creator 5.0 Does Not Function In Windows XP
... but sometimes the first time people know about this is when the PC starts throwing a 0x50 at them them they try to launch itunes or (of all things) plug in an ipod ...
if that doesn't seem to be a factor, another thing to try is vigorous spyware and virus scans (with fresh definitions). both haxdoor and sdbot can make PCs suddenly start throwing 0x50s after new software installs.
but if those turn up blank, let's try getting a minidump on the crash to the Discussions Hosts so they can throw it over the fence to the Apple Engineers for a look. (thanks to toonz for teaching me this one.)
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
And then send it to a Discussions Host. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b

Latest Java release (1.6.0_25) crashes systematically on Firefox

The online software developed by my company uses multiple Java applets on the page. When we tested the latest Java update (1.6.0_25) last week, we realized that Java would unexpectedly stop when used with Firefox.
I managed to create a test page to reproduce this issue. In the page, I used applets available from java.com and javatester.org (it's simple applets which test your Java version).
To reproduce it, go to [http://www.aleks.com/multi_applets_crash2] and click on refresh. After few times (usually less than 10 times) Java will stop and the applets won't be displayed. If you had the Java console opened at the same time, you would be able to see it close suddenly. No Java icon is visible in your Windows system tray.
We tested with Windows XP, Vista and Windows 7 and with different versions of Firefox (4.01.1, 3.018, 3.5.10, 3.5.15, 3.6.3, 3.6.13 and 3.6.17). With Java 1.6.0_25, it always crashes.
If you test with Java 1.6.0_24 it does NOT crash.
If you test with other browsers (IE and Chrome) and Java 1.6.0_25, it almost never crashes.
Any help to fix this issue would be greatly appreciated. If you think I should post this somewhere else, please advise (I have also posted this issue on bugzilla.mozilla.org: [https://bugzilla.mozilla.org/show_bug.cgi?id=654847]).

856635 wrote:
..Any help would be greatly appreciated. Did you have a question?
..If you think I should post this somewhere else, please advise (I will also post this issue on bugzilla.mozilla.org).Probably a good move. These types of applet/JRE/browser interaction problems are common. If they are not reported, they are not fixed.

Installing New Operating System

Is there any way to install an operating system that was made for a different apple machine. Each time I try to do it, it tells me that it can't install the bundled apps on my computer. I would like to just install the OS, but there doesnt seem to be that option...

Ah, now I probably see my problem. The game is Law and Order: Dead on the Money. Was made for 10.2.8 However, there was some kind of problem with Java and Java 3D and, so, they made a patch for it. However, the patch only works with 10.3 (or so I thought). It probably works for 10.3 or higher, but not on Intel Macs. So, I've got my MacBook which has an appropriate operating system but an Intel chip and I've got my eMac with the right hardware, but only 10.2.8. I've got my copy of 10.4 that came with my MacBook that I can't install and my copy of 10.3 that came with my brother's MacMini that I can't install. Frustrating...

Cannot find Microsoft Word Installed on your system - RH10 - a solution

I started receiving the error "Cannot find Microsoft Word Installed on your system" whenever I tried to generate printed documentation from RoboHelp 10. This occurred after I installed Open Office 3.4.1.
Clicking the "Printed Documentation" option in the SSL pod generated the error. However, right-clicking on the "Printed Documentation" option, selecting "Properties", then clicking "Save and Generate" did work. Go figure.
I am using Word 2007.
All of these suggested solutions to resolve the problem didn't work, unfortunately.
Uninstalling and reinstalling Open Office with the correct option selected for file associations as suggested here:
http://www.grainge.org/pages/authoring/printing/print_issues.htm#other_issues
Tried reinstalling the MPJ2DOC.DLL as suggested here:
http://helpx.adobe.com/robohelp/kb/error-cannot-find-microsoft-word.html
Tried all the suggestions here:
http://forums.adobe.com/message/4173839
Spent 2 hours with Adobe support (they were helpful but could not fix the problem) uninstalling and reinstalling RoboHelp, including reinstalling and registering the dll again.
Finally I fixed the problem by following the simple solution here. I found that the problem was that the Word file associations were corrupt and you simply need to reregister word.
http://www.word.mvps.org/FAQs/AppErr...gisterWord.htm
Here's the solution in case the link does not work:
How to re-register Word when problems crop up opening files
Article contributed by Cindy Meister
If you find that Word files do not open in the desired version of Word when you double-click them in Windows Explorer, or that when opening them from the Desktop or Explorer, a series of messages appear claiming that the file cannot be opened, such as:
“Cannot open C:\My”
“Cannot open "Documents\The”
“Cannot open "Test.doc"”
.. you need to re-register Word. To fix the problem:
Word 97 and above
Click Start | Run (bottom- left corner of your screen).
In the “Open“ box, type:
winword /rand press Enter. Note that there is a space before the forward slash
Word 95
Locate the file winword.reg on your system
Double-click it to re-register Word
Hope this helps anyone else who has struck this problem.
Cheers Mark

I am not surprised that the DLL is crashing your system. If you read the Knowledge Base item for that file it specifically refers to RoboHelp 9. Your first step is to restore the correct DLL for Rh10. I hope you backed it up.
What is your operating system?
Have you tried uninstalling and reinstalling?
Is your Normal.dot file on your local drive or on a network.
Are you generating the printed document to your local drive?
At what point does the generation crash?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Installing two Different Systems

I posted this previously but my question was not very clear so I'll restate it (hopefully ) better.
I have a dual 1gig G4. I want to run Tiger for my daily work and keep 10.5 on the machine for when I am not DJing. Right now Leopard crashes in the middle of a set and I have lost remote control on both my Macally and Keyspan triggers. What I wanted to avoid was losing my playlists, Having to reimport my music which has metadata stored with BPM, Genres etc. When I have changed my system previously all that time intensive work has failed to make the migration.. I DO NOT want to run them simultaneously. Can you install both operating systems then open applications in which ever system I booted from OR do I need two separate Applications folder. It seems that at most I would need two Libraries but not duplicate apps. Does that sound reasonable?

Thanks how would I know?I really need only two apps in 10.5 Traktor & Mac Ally keypoint. oh yeah plus iTunes but the issue is would I need to recreate all my iTunes notes, playlists or bpm info?That would be the dealbreaker

Identify USAGE TYPE that has been installed in the system

Hi All,
I have a newly upgraded BI system. I need to check what are all the USAGE types that has been installed in the system. How to verify the same (without asking the basis person). Is there any system parameter or transaction which would give the usage type installed.
Points would be assigned for useful answers.
Thanks,
Vidhya.A

Hi Vidhya,
In BI the designtime and runtime of webtemplates use BI-JAVA usuage type.similarly for Formatted reporting too it uses BI-JAVA.see if you can successfully create a new webtemplate and can execute it,if you can then they had deployed dual stack in ur system.u can also check in Tcode SICF to see if web services are on.let me know if that helps
Regards
Chandru

No slapd in registry! and it still wouldn't install on Win2K

I donot have "slapd" in registry!! and it still wouldn't install on
Win2K. After the installation, the directory c:\iplanet\ias contains
nothing.
Iplanet people please help

Hi Sameer,
Actually iAS-sp2 doesn't support win-2000 oficially, but it
works fine on it, i have tried this.
Very soon iAS-sp3 is going to be released to the market,
it supports win-2000 also.
Try this, i think it will help -
run regedit -
1. goto HKEY_LOCAL_MACHINE\Software and delete iPlanet
folder,
2. goto HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services
delete the entries for : adminXXX-serv, iAS60,
slapd4.1, slapd-servername.
run regedt32 -
1. goto HKEY_LOCAL_MACHINE/SYSTEM/ControlSet001/Enum/Root
and changed the permission for key LEGACY_SLAPD-xxx from
security, and delete it, check in other controlSet also,
including currentControlSet.
Also look for the registry entry for domain name, sometimes
setting the domain name from control panel doesn't update
the domain name entry in registry, it happen with me also,
you have to manually edit the domain name entry in win
registry.
After that delete the iplanet home directory of previous
installation, and try installation again, it should work
fine, I have installed test-drive phase-II this way on
win-2000, it works fine.
Thanks,
Sanjeev.
Dev-support(iAS)
Sameer wrote:
>
I donot have "slapd" in registry!! and it still wouldn't install on
Win2K. After the installation, the directory c:\iplanet\ias contains
nothing.
Iplanet people please help

Mountain Lion install crash on Mac Pro

Hi,
Just started the install on my Early 2008 Mac Pro and it's completely crashed the system. The app downloaded fine and ran OK in 10.7 doing the setup and then tried to reboot. As soon as it rebooted I get a Kernel Panic and the 'Please Power Off your System'.
I've managed to get into Recovery Mode and am going to restore from Time Machine and try again but has anyone else had this?
There were no warnings or errors before the kernel panic at all.......
Thanks,

This worked for me....
Restart
During restart, hold Ctrl + Command + P + R to reset the PRAM
After this, the computer will flash and reboot again and should boot into the Mountain Lion Installer.
Good luck.

Sql developer crashing my system

Hi All,
I have used Oracle SQL developer for more than a year now.
After installing Apache Tomcat 7.0.34, now when I open my Oracle SQL developer its crashing my system.
I downloaded latest SQL developer version(32 and 64bit), tried with jdk version 1.5, 1.6 and 1.7.
I have windows 7(64 bit), Oracle client(32 bit).
Could anybody suggest me how to fix this problem?
Thanks in advance
Regards,
Arul

@Jim:
Thanks for your suggestion. After several hours of experimenting, I've managed to fix my problem by copying the ojdbc6.jar from my ODAC installation and replacing the one in [sqldeveloper root]\jdbc\lib
To whomever has a similar issue: See my original post for what software I was using and their version numbers.
Edited by: FrostyZoob on Mar 14, 2013 8:11 AM

Premiere Pro CS4 crashes and system shuts down while rendering

Hi All,
Good morning everyone, my system shuts down while rendering using Adobe media encoder from premiere pro. I have tried the following:
1.Completely removing CS4 and reinstalling.
2. Updating all the video drivers.
3. Re installing the Operating System (XP and Vista)
But the issue persists, i have attached the crash report and any thoughts are highly appreciated.
Regards,
Vincent

A number of problems pop out of your DXDIAG:
Both your video driver and your audio driver are more than 3 years old.
Your F drive is slow, because of the fill rate of 90%. You lack other hard disks.
You have Matrox, BlackMagic, Nero, Sony, DivX and other stuff installed. It has been a long time ago that I have seen such a long list of DirectShow filters installed.
Suggestions: Update your drivers, clean up your F drive and add another disk, remove all that Matrox stuff, possibly include BlackMagic and Sony.
What export/encoding settings do you use from what sequence settings?

Java 1.4.2 install crashes Win2K system

Similar Messages

Maybe you are looking for