Java : 1.5.0 progress bar stops at 100%
when uploading a file the progress bar reaches 100% but the fails to show the applet. theres a response saying waitng for answer, but doesnt answer.????
any ideas to this problems. i have tried lookg in FAQs but havent found anyhing reltaing to this particular issue
i have tried lookg in
FAQs but havent found anyhing reltaing to this
particular issueThen it is most probably an issue with your code and since we don't have access to it it is difficult to help.
Similar Messages
-
UpdateManager progress bar stops
dear all,
I meet a problem of the Update Manager with Solaris10 under Java Desktop Environment. I started the Update Manager and continued to the update progress.
After I took a break back to the screen, I found the progress bar stops. I confirmed it waiting for 10 min, and nothing move in the progress bar in the "installing updates" stage.
Could anyone helps me to solve this problem? I need to know how to finish the update, or cancel it without system failure. I am afraid that if I cancel it directly, system will be failed, and I have to re-install whole Solaris 10 again.
Sincerely thanks for your helpI have this issue too. I have found that you can just xkill the darn thing and start to add packages one or two at a time till you find the one causing the system to hang. I then just search for that package, download it individually and install it manually. I am sure there are better ways but until they get the update manager to work....
-
Installing adobe reader update, install progress bar stops at 30% and never restarts. IMAC yosemite 10.10.1
Not sure if you mean installation or download, but here are some links to look at
Quick fix | Install, download | Reader
Install Adobe Reader X | Mac OS
Troubleshoot Adobe Reader installation | Mac OS -
I am unable to download itunes software onto my PC windows 7. the progress bar stops at around 80%. If my security (Spyware is blocking it then I don't know how to 'temporarily' disable it, or then get it back?
I've been unable to research a reason its trying to go to a directory that does not exist. It leaves me with out any way to sinc tunes onto my iPod.
-
I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.
I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.
-
blue progress bar stop when I try to open certain websites. Why cannot I open them? There is no message or any thing. It just stops. Other sites is without problems
Repair Permissions can be found as an option in...
Applications>Utilities>Disk Utility
Or my prefered method, get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start. -
Safari progress bar stops halfway
More of an annoyance than a real problem, but the progress bar stops halfway when visiting a site, even though the page is done downloading. Running Safari 3.0.4 in Leopard with latest updates. Very strange. Seems to slow down occasionally as well, and started when I upgraded the MacBook Pro to Leopard. Thoughts?
Hi Stevie and welcome to the forums!
Try this:
Empty Safari's cache (from the Safari menu), then close Safari.
Go to Home/Library/Safari and delete the following files:
form values
download.plist
Then go to Home/Library/Preferences and delete
com.apple.Safari.plist
Repair permissions.
Start up Safari again, and things should have improved.
If not, MacFixit have published a very detailed (very!) article on speeding up a slow Safari, here:
http://www.macfixit.com/article.php?story=20070416000657464 -
When I try to empty trash, progress bar stops, and I have to reset finder
This has been happening for about a week or so. Regardless of what the files are, I am unable to delete them. Whether I do a standard empty trash, or a secure empty trash, I end up with the same progress bar that stops during the process. I've let it sit for several minutes and over an hour, leaving me the only option of doing a force restart of finder.
Currently I am unable to delete anything, putting a serious hold on my workflow.
It appears that many people are having all kinds of trash issues with Snow Leopard. I'm assuming Apple is working on a fix, but I'm not sure when that's coming out. Until then, if there is some kind of work-around, I'd love to know about it.
Any guesstimates on when Apple will release the next OS update?
Cheers.
BenStart with http://www.thexlab.com/faqs/trash.html Do note that AFAIK, there aren't any trash issues with Snow Leopard, just the normal handful of common issues, usually fixed by the steps in the linked article.
-
My files are not uploading; progress bar stops and I get an error message
Last night (dec. 23) I was trying to upload 30 photo files. The progress bar works, but it either stalls or at the end I get an error message. These are time critical, I have a client waiting for the photos. I tried sending just a couple of photos, but the same issue happens. Please give me a solution.
Hi Lory Hawley,
Have you been able to upload your files? What is the error that you're receiving?
For starters, please try the following:
Clear the browser cache and try again.
Try a different browser (see System requirements | Acrobat.com for a list of supported browsers).
Please let us know how it goes.
Best,
Sara -
Hi,
after starting my MacBook Pro I was faced with a grey screen stating that "an error has occurred, you need to restart your computer". I did that multiple times but the same message appeared each time. So I started the Safe Boot. Now the progress bar is stuck at the 25-30% progress mark since 30 min. Any advise on what to do from here?
Any help and advise is much appreciated!I doubt that shutting it off will do any harm but don't do it too often.
Here is the best advice I can find for you:
http://reviews.cnet.com/8301-13727_7-57573680-263/what-to-do-when-a-mac-wont-boo t-to-safe-mode/ -
Issues with publishing my iWeb site to .MAC - Progress bar freezes at 100%
Well, as topic says, i'm having troubles publishing my iWeb site to .MAC now since upgrading to '08. The progress bar reaches full circle, but then nothing. Left it uploading to .Mac for well over 2 hours one time while out of the house...nada. Sometimes i get an error message, sometimes not and have to close iWeb while it's still publishing.
Any feedback regarding this?
Thanks in advance.
/RichUpdate: After 36 hours, I have successfully managed to upload my entire website via the "Publish All to .Mac" option. I now have blue indicators on the left side of my iWeb program in place of those pesky red ones. How did I do it? Well, I'm not sure. But on my last attempt I looked at the problem from a different perspective, so I took an alternate approach. I had a feeling that I was experiencing a network timeout issue caused by a 3rd party software, so I created a Whitelist entry on my website filtering software that allows unlimited access to "idisk.mac.com";; and "web.mac.com";; domains. I've got two kids at home, so I'm running the free OpenDNS Dashboard service on my network which provides content filtering (blocks adult site, phishing site, etc..). I started using this service two weeks ago. My last website update was a week before that. I figured I had nothing to loose by trying. To my surprise, it worked. Now, it took almost two hours to publish, of which the pie indicator was in the "filled" position for a nerve racking hour. To reconfirm, I then made a minor change to one of the pages on my website and re-published. This time using the "Publish to .Mac" option in place of the ALL option and once again it worked. It took less than 5 minutes. Now, I'm not sure if this is a coincidence, maybe Apple fixed the problem, or maybe my website filtering service was causing some type of time out issue all along?? Don't know.. But at least for now, I'm a happy camper since I have my site up.
-
As stated I have made a package for windows running x64 8.1. Package creates successfully but when running either the .msi or the setup.exe it goes to install then rolls back and nothing happens.. no error message.
ThanksI am not the author, but I have the same problem.
Log:
12/11/2014 10:13:38[INFO] AdobePackageBuilder - Build Version - 1.7.0.43
12/11/2014 10:13:51 [INFO] AdobePackageBuilder - Extraction completed with return code = 0
12/11/2014 10:14:08 [WARN] AdobePackageBuilder - No file exist at (D:\Install\ADOBE TEST PACKAGE\Design & Web Premium Package\Build\ASU\Tools\CCC\Uninstall\deploy\remove.xml)
12/11/2014 10:14:15 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
12/11/2014 10:14:17 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
12/11/2014 10:14:17 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
12/11/2014 10:14:17 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:14:17 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:14:17 [INFO] AdobePackageBuilder - Copied File (payloads\Setup.xml)
12/11/2014 10:14:43 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
12/11/2014 10:14:46 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
12/11/2014 10:14:46 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
12/11/2014 10:14:46 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:14:46 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:14:46 [INFO] AdobePackageBuilder - Copied File (payloads\Setup.xml)
12/11/2014 10:15:14 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
12/11/2014 10:15:16 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
12/11/2014 10:15:16 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
12/11/2014 10:15:17 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:15:17 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:15:17 [INFO] AdobePackageBuilder - Copied File (payloads\Setup.xml)
12/11/2014 10:15:38 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
12/11/2014 10:15:39 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
12/11/2014 10:15:39 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
12/11/2014 10:15:39 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:15:39 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:15:39 [INFO] AdobePackageBuilder - Copied File (payloads\Setup.xml)
12/11/2014 10:15:48 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
12/11/2014 10:15:49 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
12/11/2014 10:15:50 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
12/11/2014 10:15:50 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:15:50 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:15:50 [INFO] AdobePackageBuilder - Copied File (payloads\Setup.xml)
12/11/2014 10:15:59 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
12/11/2014 10:16:01 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
12/11/2014 10:16:01 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
12/11/2014 10:16:01 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:16:01 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:16:01 [INFO] AdobePackageBuilder - Copied File (payloads\Setup.xml)
12/11/2014 10:16:05 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:16:05 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:16:05 [INFO] AdobePackageBuilder - Copied File (payloads\Setup.xml)
12/11/2014 10:16:05 [INFO] AdobePackageBuilder - ASU at Path (D:\Install\ADOBE TEST PACKAGE\Design & Web Premium Package\Build\Setup\APRO11.0.0en_GB\Set-up.exe) is not found. Skipping copying and renaming.
12/11/2014 10:16:15 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
12/11/2014 10:16:16 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
12/11/2014 10:16:16 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
12/11/2014 10:16:16 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:16:16 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:16:16 [INFO] AdobePackageBuilder - Copied File (payloads\Setup.xml)
12/11/2014 10:16:23 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
12/11/2014 10:16:25 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
12/11/2014 10:16:25 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
12/11/2014 10:16:25 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:16:25 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:16:25 [INFO] AdobePackageBuilder - Copied File (payloads\setup.xml)
12/11/2014 10:16:40 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
12/11/2014 10:16:41 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
12/11/2014 10:16:41 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
12/11/2014 10:16:41 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:16:41 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:16:41 [INFO] AdobePackageBuilder - Copied File (payloads\Setup.xml)
12/11/2014 10:16:44 [INFO] AdobePackageBuilder - Copied Setup file/folder (packages)
12/11/2014 10:16:46 [INFO] AdobePackageBuilder - Copied Setup file/folder (resources)
12/11/2014 10:16:47 [INFO] AdobePackageBuilder - Copied File (Set-up.exe)
12/11/2014 10:16:47 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.db)
12/11/2014 10:16:47 [INFO] AdobePackageBuilder - Copied File (payloads\Media_db.sig)
12/11/2014 10:16:47 [INFO] AdobePackageBuilder - Copied File (payloads\Setup.xml)
12/11/2014 10:18:19 [INFO] AdobePackageBuilder - Successfully created Setup.ini file for Acrobat Customized Wizard. -
Creating progress bar in oracle forms 6i
Hii
I have a push-button (pb_submit)
when when_button_pressed trigger fired...I have a database main procedure to be called.
inside that procedure i am calling 25 procedures.
and all 25 Procedures will be executed sequencially.
I want to use a Progress bar...
so that user will get to know hw much % completed
if main procedure(total 25 procedures inside) is completed successfully then progress bar should show 100%
like wise if 1 procedure completed then 4 %
if 2 procedure completed then 8 %
total 25 procedure completed then 100%
how to implement this logic.
and if in between 1 procedure failed then progress bar should stop at that incident.
and it should start from dat instant only if again that failed procedure run successfully.
should i post my codes here.ok...here is the codes written in the button(when_button_pressed trigger)
DECLARE
l_Last_Record NUMBER := 0 ;
l_Prg_Process_Id NUMBER ;
l_Prg_Process_Id_1 NUMBER ;
l_Prg_Id VARCHAR2(15) ;
l_Alert_Result VARCHAR2(1) ;
l_Validation_Msg VARCHAR2(500) ;
l_Path VARCHAR2(240) ;
File_Name VARCHAR2(250) ;
l_file_exists BOOLEAN ;
l_file_len NUMBER ;
l_blocksize BINARY_INTEGER;
o_Status VARCHAR2(1) ;
o_User_Selection_Ca1 VARCHAR2(1) ;
o_User_Selection_Ca2 VARCHAR2(1) ;
o_User_Selection_Ca3 VARCHAR2(1) ;
CURSOR C_Validation IS
SELECT Cpv_Validation_Type ,
Cpv_Validation_Input ,
Cpv_Validation_Action ,
Cpv_Validation_Active_Flag
FROM Config_Process_Validation
WHERE Cpv_Program_Id = l_Prg_Id
AND Nvl(Cpv_Validation_Active_Flag, 'N') = 'Y'
ORDER BY Cpv_Validation_Sequence;
BEGIN
SELECT RV_HIGH_VALUE
INTO l_Path
FROM CG_REF_CODES
WHERE Rv_Domain = 'DERV_DATA_FILES'
AND Rv_Low_Value = 'DRV_FILES';
Go_Block('Process');
Last_Record;
l_Last_Record := :System.Cursor_Record;
First_Record;
FOR i IN 1 .. l_Last_Record
LOOP
Go_Record(i);
l_Prg_Id := :Prog_Id;
IF NVL(:Process.Cb_Select,'N') = 'Y' THEN
:Query.Current_Status := 'Current Process: ' || :Process.Prog_Desc;
Synchronize;
--Validate if program is already in running mode or already completed
SELECT NVL(MAX(DECODE(Prg_Status, 'R', 999999999, 'C', Prg_Process_Id)), 0)
INTO l_Prg_Process_Id
FROM Program_Status,
Parameter_Master
WHERE Prg_Dt = Pam_Curr_Dt
AND Prg_Cmp_Id = l_Prg_Id
AND Prg_Exm_Id IN ('ALL', :Query.Exchange)
AND Prg_Status IN ('R', 'C');
IF l_Prg_Process_Id = 999999999 THEN
P_Show_Alert(l_Prg_Id||' Process is already running.','A',l_Alert_Result);
--RAISE Form_Trigger_Failure;
ELSIF l_Prg_Process_Id > 0 AND :Execution_Flag <> 'M' THEN
P_Show_Alert(l_Prg_Id||' Process already run. It can not run twice. ','A',l_Alert_Result);
RAISE Form_Trigger_Failure;
END IF;
--Validate mandataory process, process specific validation and message
FOR i IN C_Validation
LOOP
IF i.Cpv_Validation_Type = 'MANDATORY' AND i.Cpv_Validation_Active_Flag = 'Y' THEN
SELECT Count(1)
INTO l_Prg_Process_Id_1
FROM Program_Status,
Parameter_Master
WHERE Prg_Dt = Pam_Curr_Dt
AND Prg_Cmp_Id = i.Cpv_Validation_Input
AND Prg_Exm_Id IN ('ALL', :Query.Exchange)
AND Prg_Status = 'C'
AND Prg_Process_Id IN (SELECT MAX(Prg_Process_Id)
FROM Program_Status,
Parameter_Master
WHERE Prg_Dt = Pam_Curr_Dt
AND Prg_Cmp_Id = i.Cpv_Validation_Input
AND Prg_Exm_Id IN ('ALL',:Query.Exchange)
AND Prg_Status = 'C');
IF l_Prg_Process_Id_1 = 0 THEN
P_Show_Alert(i.Cpv_Validation_Input||' Mandatory Process NOT completed successfully.','A',l_Alert_Result);
RAISE Form_Trigger_Failure;
END IF;
ELSIF i.Cpv_Validation_Type = 'MESSAGE' THEN
P_Show_Alert(i.Cpv_Validation_Input, i.Cpv_Validation_Action, l_Alert_Result);
IF l_Alert_Result = 'N' THEN
RAISE Form_Trigger_Failure;
END IF;
ELSE
--- OTHER PROCESS SPECIFIC VALIDATION
l_Validation_Msg := Null;
Pkg_Process_Automation.P_Pre_Process_Validation(l_Prg_Id,
:Query.Exchange,
:Query.Segment,
i.Cpv_Validation_Type,
l_Validation_Msg);
IF l_Validation_Msg IS NOT NULL THEN
P_Show_Alert(l_Validation_Msg,i.Cpv_Validation_Action,l_Alert_Result);
IF l_Alert_Result = 'N' THEN
RAISE Form_Trigger_Failure;
END IF;
END IF;
END IF;
END LOOP;
--Validating whether file exists or not
IF :Process.File_Input_Format IS NOT NULL THEN
Pkg_Process_Automation.P_Gen_File_Name(:Process.File_Input_Format,
:Query.Exchange,
:Query.Segment,
File_Name);
Utl_File.FGetAttr(
location => l_Path,
filename => File_Name,
fexists => l_file_exists,
file_length => l_file_len,
block_size => l_blocksize);
IF NOT l_File_Exists THEN
--MESSAGE('The file does not exist.');
P_Show_Alert('The file does not exist.','A',l_Alert_Result);
RAISE Form_Trigger_Failure;
END IF;
END IF;
Set_Application_Property(Cursor_Style, 'BUSY');
SET_ITEM_INSTANCE_PROPERTY('Process.Status', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'VA_YELLOW');
:Process.Status := 'R';
Synchronize;
IF l_Prg_Id = 'DTMBCORP' THEN
P_Show_Alert('Do you want to do Final Settlement Corporate Action ?(Y/N)','I',l_Alert_Result);
o_User_Selection_Ca1 := l_Alert_Result;
P_Show_Alert('Enable Round-To-Tick ? (Y/N)','I',l_Alert_Result);
o_User_Selection_Ca2 := l_Alert_Result;
--P_Show_Alert('Do you want to Rollback ? (Y/N)','I',l_Alert_Result);
--o_User_Selection_Ca3 := l_Alert_Result;
END IF;
---- Calling of Main Procedure
Pkg_Process_Automation.P_Run_Process(l_Prg_Id,
:Query.Exchange,
:Query.Segment,
:Query.Entity_Id,
File_Name,
o_User_Selection_Ca1,
o_User_Selection_Ca2,
o_User_Selection_Ca3,
o_Status);
IF l_Prg_Id = 'DTMBCORP' THEN
P_Show_Alert('Do you want to Rollback (Y/N)','I',l_Alert_Result);
o_User_Selection_Ca3 := l_Alert_Result;
Pkg_Process_Automation.P_Run_Process(l_Prg_Id,
:Query.Exchange,
:Query.Segment,
:Query.Entity_Id,
File_Name,
o_User_Selection_Ca1,
o_User_Selection_Ca2,
o_User_Selection_Ca3,
o_Status);
END IF;
Set_Application_Property(Cursor_Style, 'DEFAULT');
Message(o_Status);
Message(o_Status);
IF o_Status = 'Y' THEN
:Process.Status := 'C';
SET_ITEM_INSTANCE_PROPERTY('Process.Status', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'VA_GREEN');
ELSE
:Process.Status := 'E';
SET_ITEM_INSTANCE_PROPERTY('Process.Status', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'VA_RED');
END IF;
SELECT Prg_Log_File
INTO :Process.Log_File
FROM Program_Status ,
Parameter_Master
WHERE Prg_cmp_id = l_Prg_Id
AND Prg_dt = Pam_Curr_Dt
AND (Prg_Cmp_Id,Prg_Strt_Time) IN (SELECT Prg_Cmp_Id,max(Prg_Strt_Time)
FROM Program_Status b,
Parameter_Master
WHERE Prg_Cmp_Id = l_Prg_Id
AND Prg_Dt = Pam_Curr_Dt
GROUP BY Prg_Cmp_Id);
Synchronize;
Set_Application_Property(Cursor_Style, 'DEFAULT');
END IF;
END LOOP;
:Query.Current_Status := '';
Synchronize;
EXCEPTION
WHEN OTHERS THEN
:Query.Current_Status := 'Error found';
Set_Application_Property(Cursor_Style, 'DEFAULT');
MESSAGE(sqlerrm );
--MESSAGE(sqlerrm );
Synchronize;
END;
inside p_run_process there are other 25 database procedures.
help me !!!Create a procedure as like,
PROCEDURE show_progress(x number) IS
y number;
BEGIN
set_item_property('PART_DISP',VISIBLE,PROPERTY_TRUE);
set_item_property('PART_DISP',WIDTH,x);
set_item_property('PART_DISP',VISIBLE,PROPERTY_TRUE);
END;
PART_DISP is a display_item.
After completion of each procedures call the above procedure like,
cntr:=cntr+1;
show_progress(round(cntr/25*287,0));
synchronize;
where cntr is a counter it will be incremented 1 to 25, the constant value 287 is the maximum width of PART_DISP (you can change for your need).
The local variable cntr's initial value is 0 and maximum value is 25.
cntr part_disp % of progress
1
11.48
4
2
22.96
8
3
34.44
12
4
45.92
16
5
57.4
20
6
68.88
24
7
80.36
28
8
91.84
32
9
103.32
36
11
126.28
44
12
137.76
48
13
149.24
52
14
160.72
56
15
172.2
60
16
183.68
64
17
195.16
68
18
206.64
72
19
218.12
76
20
229.6
80
21
241.08
84
22
252.56
88
23
264.04
92
24
275.52
96
25
287
100
Hope this will help. -
I'm running iTunes 10.5 beta 7 but this issue has been happening since I was running 9. One day I clicked on a link for an app I saw on techcrunch and it pulled up in iTunes as being in the UK store. I clicked ok and my iTunes hasn't worked since. I can log into my account but can't access anything in the store or Ping. I've googled this issue and found some similar sounding stories but none of the solutions have worked. I've uninstalled and reinstalled, turned of the itunes store in parental settings and checked "except for iTunes U", I've uninstalled apple aplication suport and installed safari and every other option I have found and nothing has worked.
Sometimes if I let it sit long enough what looks like an unstyled version of the store comes up but is completely unusable.
Just to be clear, this has been happening since before I was running any beta software or OS.
Any help would be greatly appreciated.Thank you gchin.
I emailed apple support and they got back to me, I did what he said and it's fixed! SOLUTION found- see below.
I said:
"I can't access the iTunes Store. When I click on it the progress bar stops at 50% and I'm left with a blank white screen (no error msg). I have uninstalled and reinstalled, run the iTunes diagnostics (it said all was ok), gone through all of the online help material and I've tried turning off my firewall. Nothing works. I can't sync my iphone either (stops on verifying iPhone so I think it's getting stuck on trying to contact the store). Plzz help."
They replied:
"Greetings from Apple iTunes Store Customer Support! I am ########.
I understand that you have had issues accessing the iTunes Store. I know how eager you are to have this issue resolved. I will certainly assist you.
#########, for this, I recommend that you attempt to resolve this issue by once again uninstalling iTunes and QuickTime, and then reinstalling the latest version of each. To do this, first ensure that you are logged in to an Administrator user account on your computer, then follow the instructions in the appropriate article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista:
http://support.apple.com/kb/HT1923
Note: Titles you purchased from the iTunes Store or imported from CDs are saved in your iTunes folder by default and are not deleted by uninstalling iTunes. Backing up your iTunes Library regularly is recommended.
After successfully uninstalling iTunes and QuickTime, please ensure you have upgraded to the latest Service Pack for Windows by installing all updates available to you on Microsoft Windows Update:
http://update.microsoft.com
Once you have the latest Service Pack for Windows installed, download and install iTunes for Windows (which includes QuickTime):
http://www.apple.com/itunes/download
If you continue to experience difficulty with this issue, you may wish to contact Apple technical support. A representative will be able to tell you about Apple's complimentary and fee-based support options and can help you determine which option might be most helpful.
Please find the appropriate phone number here:
http://www.apple.com/support/contact/phone_contacts.html
Thank you for contacting iTunes Store Support. Have a nice day!
Sincerely,"
AND IT WORKED happy customer. -
Question about plugging in an ajax progress bar component onto a black-box.
Hello,
I have the following problem: I want to integrate an ajax progress bar component to a j2ee application and I am in reference to the following pattern (https://bpcatalog.dev.java.net/nonav/ajax/progress-bar/design.html). It seems I need for the "task" component to return the percent. The problem I have is that I am calling a legacy method (i.e. as400) that does not return a percent as it is to me only a black-box. Here is a snippet of what it looks like to me:
AS400 sys = new AS400("AS400D.calyonfinancial.com");
sys.setUserId("jmartin");
sys.setPassword("jmartin");
CommandCall cmd = new CommandCall(sys);
cmd.run("my as400 command goes here");
AS400Message[] messageList = cmd.getMessageList();
for (AS400Message msg : messageList) {
System.out.println(msg.getText());
sys.disconnectService(AS400.COMMAND);At best I can know whether or not it is completed.
void actionCompleted(ActionCompletedEvent event) //Invoked when an action has completed.What do you advise I do bearing in mind I want to avoid using an indeterminate progress bar??
Thanks in advance,
Julien Martin.That's not a legacy method. The latest version of JTOpen was issued less than a month ago. And note that it's open-source, so you could change it yourself to provide percent-complete data. (Of course you'd have to be able to get that data from the underlying iSeries command.)
It wouldn't be easy, but if you think about it for a minute you'll realize that you can't display percentage complete in a progress bar unless you have some way of finding out what percentage the task has actually completed.
Maybe you are looking for
-
Can I use an Apple Cinema Display as a second monitor for my iMac?
I have a new 24" intel iMac and was wondering if I could use my old 20" Apple Cinema Display (aluminum) as a dual display. What cables do I need?
-
Does BestBuy plan on carrying this awesome looking laptop? I'm in the market for something similar, and really would love to use my BB card and earn some sweet rewards on it! Here's a link just in case: http://www.aorus.com/x7.aspx
-
NON CUMULATIVE KEY FIGURE 0NUMWDAY
Hi Gurus, I am having a problem I can't solve with key figure 0NUMWDAY. I have to calculate 0numwdays for each 0calmonth. 0numwday is not an attribute of 0calmonth, (in fact 0calmonth has no attributes) which is OK, because
-
Q10 Device Wont Recognize Contacts
hello am having issues with this new blackberry Q10 and this is one of the issues blackberry wont recognize my contacts get in coming calls and i do out going calls i dont see the names of the contacts when i receive a call and i dont see the name o
-
Migrating existing portable homes to new server
aside from moving the homedir data from the old server to the new, there seem to be at least a few issues with migrating existing portable home accounts to a new server: 1. some of users' account details, like GeneratedUID, authentication authority,