Java 3D won't display anything

Hi,
I'm trying to get Java3D demos to run so I can begin developing a game. The problem is I get nothing but a blank white square the size of the intended 3D display. Everything I've tried (the list is long) has had no effect. When attempted through a DOS window I get an endless repeating list of : "wglCreateContext Failed: the pixel format is invalid".
The updated drivers for the ATI radeon 9000 pro (all in wonder) shows openGL (classic) is active but nothing 3D is displayed, everything else in Java (2d, swing components, etc.) all displays normally. I've updated DirextX and tried reinstalling Java3D for that format but no change. I'm not familiar with any 3D graphics programming (yet) and it's difficult to understand what won't display. I have posted a bug report with Sun after searching for similar bugs, but all related bugs just show "closed: fixed". Has anyone had this problem or have any clue what I might try (other than waiting) to resolve this issue? Thanks,
Jerromy

There are known issues with ATI drivers and java 3D that cause behavior like this. I don`t use direct-X so I can`t sugget anything, except to search the forums at http://forums.java.net/jive/forum.jspa?forumID=70
to see if your ATI card has a workaround
regards

Similar Messages

Mac Pro 2006 won't display anything

Hi
My mac pro won't display anything. I've had a look at this http://support.apple.com/kb/HT1573 and one of the first things I did was reset the PRAM & NVRAM. The 10.6.8 install is fully updated. The startup chime plays and fans run normally.
I have:
re-sat the RAM,
cleaned the RAM
cleaned the inside
removed all the HDDs except the main one
and even used another Raedon 4850 in place of mine.
It starts up in Target-Disk mode fine, I am using it with my iMac now but it is not the same (iMac is only dual core andhas half the RAM) I've tried several screens; DVI, VGA and HDMI all without luck. It's obviouslt out of warranty and I don't want to take it to a Apple store anyway as I ocassionally build & repair computers myself so am fine with trying anything out.
Thanks in advance,
Eric.
Things I could do/ haven't done:
Remove/ replace the Logic Board battery?
test the power I/O?
start in Safe Mode?

Whoa there, sparky !!!
Is there something you aren't mentioning?
Since there has never been a Mac Pro 4850 and you have mentioned this number twice I would like to ask...what aren't you telling us?
Did this computer work fine until one day it quit? Or did you buy/inherit/find it broken or in an unknown state?
Any GPU used in a Mac Pro needs to have EFI on it to do this basic debugging stuff. While PC WIndows BIOS cards can be used if the system is A-OK and gets to desktop, it is basically impossible to use them on a system with issues.
So, if the 4870 has a DVI and a MDP port it is real Apple one and SHOULD work.
If that card died and you have tried replacing it with a WIndows/PC 4850, then you have broken the scientific rule about only changing one thing.
Ideally you would have another Mac Pro to test your GPU in and another KNOWN GOOD GPU to test in your Mac Pro. The EFI thing greatly complicates things, unfortunately. Even a "Mac Pro" video card won't necessarily work if it is for "the other" series of Mac Pro. Ther have been in effect, 2 different Mac Pros as far as video cards go. EFI32 and EFI64. ATI/AMD cards have been largely unaffected by this but Nvidia cards MUST be for right series.

LG monitor won't display anything via VGA cable

After updating to Quicktime 7.5 my screen on my LG lcd monitor starting moving up and down when using my mouse. After fiddling with the display controls to lock it back down it no longer displays anything through the VGA cable connected via the DVI adaptor to the monitor.
I am using a borrowed DVI cable to use the monitor, but I have to return that tomorrow. Tried permissions without any luck. Is there any fix for this problem so I can reuse the VGA cable without having to buy a DVI cable. Also, is there any solution to the floating screen problem?

Thanks. That solved the zooming problem. The monitor will still not work with the VGA cable though. Looks like I'll have to get a DVI cable. I had one when I got the monitor but now I can't find it.

Safari runs but won't display anything.

As the title says, all Safari windows seem to have gone somewhere! The app starts but there's nothing visible. Enter full screen and the page appears. Try anything else and nothing at all is displayed. The app seems to be running just fine, right clicking the Dock icon shows a list of open pages, clicking "Show all windows" greys out the Desktop but shows nothing at all. Clicking View and Window options has no effect. I've restarted, but no change. Very odd behaviour, never seen it before. Any solutions?

I tried switching that Resume feature off, shut all apps, restarted, but Safari is still refusing to display *anything* except in full screen mode.
(Resume was proving to be pretty irritating on other apps though, like TextEdit and Preview, so I'm glad to know the off switch is there!)
But this Safari issue is a real puzzle to me. The timing is awful, I need to start accessing my new university course website from today and literally the first time I try this issue appears. Not a complete disaster, I can still open in full screen, but I usually use half a dozen windows at once and being boxed into one is very awkward and not a good start.

Spotify Desktop App Won't Display Anything

As the title says, when I open Spotify it doesn't display anything other than the tabs at the top. When I try to click on anything in the tabs it does nothing. I am using Windows 7. Would appreciate any help with this. Thanks, Andrew

Hi there and welcome to the community,
Where did you download this client? This doesn't look like the original client. More looks like a webplayer iFrame.
I'd recommend to uninstall that version, then download Spotify from this page.
https://www.spotify.com/download/

My 3000 C200 won't display anything on start up for over an hour

I have had this unit for three years and when it is turned on It displays a message ' optimising image' but I still can't see anything for at least an hour. This occurred after an update was installed, have tried going back to restore points previous to the update but still no joy , I'm really not " tech savvy " so simple answers will really help.
It was suggested to take the machine back to factory settings , and as I have now got all documents/pictures and important info on an external hard drive so this is an option , but I also don't know how to do this either ....
Please any help to a technofobe would be appreciated

hi Crouch1969,
Welcome to Lenovo Community Forums!
Resseting the system to its Factory default using the OKR feature.
While the system is OFF
Turn ON the system then start tapping F2
You should be booted to a Recovery Screen Proceed by selecting a factory image.
(Dataloss is part of the recovery so make sure Everything is backed up)
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Hp 110-a04 won't display video when my 5670 is plugged in.

So here's the dealio. Bought a myself an hp 110-a04, threw in the sapphire 5670, doesn't display anything and I get a 6 long beeps beep code. Kill me.
So, I take out the original PSU (it's only 180 watts), throw in a 400 watt power supply, toss in the GPU aaaaannnnnnd... still won't display anything and the beep code is back (in the old PC it was in worked fine with the 250 watt psu).
The computer works perfectly fine without the card, boots up, actaully displays stuff when plugged by VGA. Why it won't display anything is absolutely beyond me. Everything is hooked up to the new PSU, it's just that nothing works with that graphics card in.
Halp me.

Hello @HAIRSHAMENSTUFF,
I understand that you are having issues getting the sapphire 5670 to work with your HP 110-a04 Desktop PC. I suspect that you will have to enable legacy devices in your BIOS. Unfortunately, I do not have access to the BIOS for your computer to provide you with step by step instructions, but if you tap F10 on startup and enter the BIOS you can browse through until you find a way of enabling legacy support or mode.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Flash builder 4.7 as plugin won't display asdoc

Hi,
on windows 7 x64, I just installed Flash Builder 4.7 x64 on my existing eclipse 4.2 x64 (using "the Adobe Flash Builder 4.7 Plug-in Utility") and the asdoc popup won't display anything but the current element. If I start the standalone Flash Builder, using the same workspace and same project, it works fine. Do I need to configure something else so it works as a plugin?

My mistake...
There was a typo into the XML application descriptor, that prevented the app to install properly on the device.
Precisely, it wasn't a typo but raher a malformed <intent-filter> node. I launched adb tool from the console with adb install MyApp.apk command, and I saw this : Failure [INSTALL_PARSE_FAILED_MANIFEST_MALFORMED] in the terminal. From here it was easy to find the culprit.
What would be cool is to have this feature inside the Flash Builder's Console panel.

SHARP TV won't display MacBook.

I use my SHARP tv as a monitor for my MacBook often and I've never had an issue. I just use the HDMI port on the TV.
Now, the TV won't display anything. Everything is plugged in properly, and the Mac even responds as if it is plugged into the TV... So, it seems to detect the Sharp TV. However, the TV isn't responding at all. It still responds to the DVD player, etc. on the other inputs, just not to the Mac. Any thoughts or suggestions would be appreciated! Thanks.

How are you getting from miniDVI to HDMI? (adapter(s) type?)
Have you been able to test your macbook on another tv (or DVI monitor?)
It could be a software thing (e.g. related to a system update) as in this thread:
Macbook (Late 2007) External Display Not Working
http://discussions.apple.com/thread.jspa?threadID=2055760&tstart=45
Or it could be something else entirely more mysterious:
Macbook stopped working with a certain specific display (external DVI)
http://discussions.apple.com/thread.jspa?threadID=2081807&tstart=0

Ipod won't display but music still plays and i can move around in menu...

My Ipod mini won't display anything on the screen even after I reset it, I even hear the click type sound come from the headphones when its turned on. Right now I'm listening to music and the screen isn't showing anything is my screen broke???If it is what do I do???

Open the iPod Software Updater application. It can be found by clicking on the Start menu, pointing to All Programs (Windows XP) or Programs (Windows 2000), and then point to iPod.
It says that but in the computer I don't have an Ipod thingy in my programs???

Pavilion g6 updated to windows 8.1 now tv won't display the screen

I cracked the screen of my HP Pavilion g6, so I usually connect it through HDMI to my Coby TV and it usually worked fine. Now, after updating to Windows 8.1, my TV won't display anything. I believe it is because the screen is black, and my TV never displayed a black screen before, it only showed the screen once the laptop has started up. I've tried pressing f4 and i can see that the screen is blue in the small area of my screen that still works, but it still isn't showing through my TV so I don't know how I can fix this problem because I cannot see the screen. Please help!

Hi ke11ie,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after upgrading to Windows 8.1 your external display(CobyTV) is not working. Just to rule out the TV if you connect to a different display does it work?
Here is a link to Connecting a Monitor, Projector or TV (Windows 8).
Here is a link to Display Quality Issues, that may also be of aid.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

ALV won't display

Hi all,
I'm at internship and have to learn ALV.
The below code won't display anything. Am i doing something worng?
REPORT ZRE_PRM2_LIST_DISPLAY.
*-- Global data definitions for ALV
*--- ALV Grid instance reference
DATA gr_alvgrid TYPE REF TO cl_gui_alv_grid .
*--- Name of the custom control added on the screen
DATA gc_custom_control_name TYPE scrfname VALUE 'CC_ALV' .
*-- Custom container instance reference
DATA gr_ccontainer TYPE REF TO cl_gui_custom_container .
*-- Field catalog table
DATA gt_fieldcat TYPE lvc_t_fcat .
*-- Layout Structure
DATA gs_layout TYPE lvc_s_layo .
**-- Internal table
DATA gt_list TYPE zprm2_material occurs 0 with header line .
* START OF SELECTION
START-OF-SELECTION .
PERFORM get_data .
PERFORM display_alv .
*&      Form display ALV
*       Display selected PRM2 data.
FORM display_alv .
IF gr_alvgrid IS INITIAL .
*---- Creating custom container instance
    CREATE OBJECT GR_CCONTAINER
      EXPORTING
        CONTAINER_NAME              = gc_custom_control_name
      EXCEPTIONS
        CNTL_ERROR                  = 1
        CNTL_SYSTEM_ERROR           = 2
        CREATE_ERROR                = 3
        LIFETIME_ERROR              = 4
        LIFETIME_DYNPRO_DYNPRO_LINK = 5
        others                      = 6
    IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CREATE OBJECT GR_ALVGRID
      EXPORTING
        I_PARENT          = gr_ccontainer
      EXCEPTIONS
        ERROR_CNTL_CREATE = 1
        ERROR_CNTL_INIT   = 2
        ERROR_CNTL_LINK   = 3
        ERROR_DP_CREATE   = 4
        others            = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
*----Preparing field catalog
    PERFORM prepare_field_catalog CHANGING gt_fieldcat .
*----Preparing layout structure
    PERFORM prepare_layout CHANGING gs_layout .
    CALL METHOD gr_alvgrid->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
*        I_BUFFER_ACTIVE               =
*        I_BYPASSING_BUFFER            =
*        I_CONSISTENCY_CHECK           =
*        I_STRUCTURE_NAME              = 'zprm2_material'
*        IS_VARIANT                    =
*        I_SAVE                        =
*        I_DEFAULT                     = 'X'
        IS_LAYOUT                     = gs_layout
*        IS_PRINT                      =
*        IT_SPECIAL_GROUPS             =
*        IT_TOOLBAR_EXCLUDING          =
*        IT_HYPERLINK                  =
*        IT_ALV_GRAPHICS               =
*        IT_EXCEPT_QINFO               =
*        IR_SALV_ADAPTER               =
      CHANGING
        IT_OUTTAB                     = gt_list[]
        IT_FIELDCATALOG               = gt_fieldcat
*        IT_SORT                       =
*        IT_FILTER                     =
      EXCEPTIONS
        INVALID_PARAMETER_COMBINATION = 1
        PROGRAM_ERROR                 = 2
        TOO_MANY_LINES                = 3
        others                        = 4
    IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF .
ENDFORM .
*&      Form get_data
*       GET data from prm2 tables.
FORM get_data .
select * from zprm2_material into gt_list .
    APPEND gt_list .
ENDSELECT.
ENDFORM .
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat .
DATA ls_fcat type lvc_s_fcat .
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
   EXPORTING
     I_STRUCTURE_NAME             = 'zprm2_material'
    CHANGING
      CT_FIELDCAT                  = pt_fieldcat[]
   EXCEPTIONS
     INCONSISTENT_INTERFACE       = 1
     PROGRAM_ERROR                = 2
     OTHERS                       = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM .
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo .
ps_layout-zebra = 'X' .
ps_layout-grid_title = 'PRM2' .
ps_layout-smalltitle = 'X'.
ENDFORM .

I made these changes:
DATA gr_ccontainer TYPE REF TO cl_gui_dialogbox_container .
so i changed the reference of the container to cl_gui_dialogbox_container, and...
    CREATE OBJECT GR_CCONTAINER
      EXPORTING
        width                       = 1000
       height                      = 250
        top                         = 50
        left                        = 50
        caption                     = 'TEST'
      EXCEPTIONS
        cntl_error                  = 1
        cntl_system_error           = 2
        create_error                = 3
        lifetime_error              = 4
        lifetime_dynpro_dynpro_link = 5.
    IF SY-SUBRC <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
Changed this method. Now it says that the fieldcatalog is empty.
I just want it to auto create the container. Is it a possibility?

I was trying to fix my screen resolution and now it's stuck on auto detect cannot display this video mode. I tried another monitor and it still won't show anything. I'm locked out

I was trying to fix my screen resolution and now it's stuck on auto detect cannot display this video mode. I tried another monitor and it still won't show anything. I'm locked out

Reset the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next try Safe Mode boot and and then normal boot
OS X: What is Safe Boot, Safe Mode?

My iPhone 5 won't display smart text options.

My iPhone 5 won't display smart text. It did when I initially downloaded the new OS, now those options don't appear at all. Did I click something to make them disappear?
I went into Settings to see if there was a component of it within Messages. I don't see anything.
Thoughts please.....
Thanks much
Ginger

Awwww......that's it....the dash! I tapped it. Tried to drag it up/down and it didn't move. Now I swiped and it's back!
So I need to remember to drag up/down and now swipe.....
Thanks much!
Ginger

ITunes won't display current voice memos from my iPhone 4S. How can I tranfer this data without loosing it?, iTunes won't display current voice memos from my iPhone 4S. How can I tranfer this data without loosing it?

Please help! My iTunes won't display my voice memos from iPhone 4S when trying to sync data. Files are to large for emailing. I want to back up the files on to my computer.

JustinV72 wrote:
How do I get the audiobook onto my iphone without erasing anything?
You transfer the purchases to the computer you use to sync the iPhone. You can use a thumb drive or an external HD, etc. Read this: iTunes for Mac - How to copy purchases between computers: http://support.apple.com/kb/HT1373

Java 3D won't display anything

Similar Messages

Maybe you are looking for