Java Access Bridge 2.0.2 Installer for Windows OS

Hi,
I am searching for an automated install version of Java Access Bridge 2.0.2 for Windows, but am having great difficulties.
The version that is around just now is not practical for our needs. I work for an organisation who wish to get users to install Java Access Bridge in order to use JAWS. As they are blind or partially sited, the manual install is too difficult for them to carry out by themselves.
Searching Google has proved fruitless, and the only real lead I have found was on these forms when someone said that one was in beta test, but having searched the web site, I could not find it.
Could someone please let me know the current status of the installer ?
Thanks
GW

You might want to check out this thread:
Java Access Bridge and JRE 1.6
If you have Java 6, you'll need to manually install Java Access Bridge 2.0.1. The JAB 2.0.2 installer for Java 6 is also available as a beta:
http://jdk6.java.net/6uNea.html

Similar Messages

Java accessibility Bridge for windows

I have installed Java Accessibility Bridge for windows but the screen reader in windows (Narrator) is not responding to my java application. On searching the internet, most of them mentioned about JAWS. So is it the only screen reader supporting Java Accessibility Bridge? Also is there any way to use it with Narrator?
Thanks in advance
leeman

Narrator doesn't use the Java Access Bridge so it will not work with Java. Recommend you use another screen reader. Yes, many people do use JAWS, but I also know SuperNova (from Dolphin) and NVDA also work.

Using Java Access bridge (Accessibility) with oracle forms 6.0 client

I'm trying to use JAB (java Access bridge ) to capture events in oracle forms 6.0 client .
I've a Jinitiator 1.1.8 and JRE version 1.4x
I've configured JAB as per the installation guide . However the events don't surface in Java Monkey .
Has anybody encountered similar issue ? what is the solution for the issue ??
Also on one of the forums I read Jinitiator 1.3x and above is automatically recognised by Java Access bridge .
For jinitiator version less than 1.3 manual configuration is required . however I haven;'t been able to find any on the oracle forms KB
Also here is the excerpt from the link http://www.oracle.com/us/corporate/accessibility/faqs/index.html
Q: Are there special steps for using Java-based applications with assistive technology?
A: If the Oracle application is written in Java, such as JDeveloper or Oracle Forms (runtime), customers must first install the latest version of Sun's Java Access Bridge. The Java Access Bridge provides the integration with screen readers such as JAWS or SuperNova that support Java. You just download the Access Bridge and install it. Sun's AccessBridge 2.0x recognizes Oracle's JInitiator 1.3x and above so no manual configuration steps are necessary. The Access Bridge is available from: http://java.sun.com/products/accessbridge. At the time this document was written, Access Bridge 2.0.1 is the most current publicly available production release; Oracle recommends upgrading to this version. Sun's AccessBridge is bundled with Oracle Universal Installer (OUI) and can be found in the Java Runtime Engine (JRE). More information for configuring such products is in the respective product documentation, or on http://www.oracle.com/us/corporate/accessibility/products/index.html.
Edited by: 974810 on 4 Dec, 2012 1:10 AM

ODP.NET requires Oracle Client 9.2 or higher.
You can find additional information about ODP.NET from the FAQ:
http://www.oracle.com/technology/tech/windows/odpnet/faq.html
and the ODP.NET homepage:
http://www.oracle.com/technology/tech/windows/odpnet/index.html
Hope that helps,
Mark

Get Native Java Window using Java Access Bridge 2.0.1 & Java 1.6 and above

I want to get the native java window (Like Java Monkey Application and Java Ferret Application) using java only, for that I tried different ways/options but unable to get the native java window and perform actions on that.
It would be really great if you could guide me for that. I am still unable to start the Java Access Bridge.
Please let me know the steps to get native java window using Java Access bridge and JDK 1.6.20.
Also Note that, As per your previous suggestion, I tried to search and call initializeAccessBridge() and shutdownAccessBridge(), But unable to succeed it. I did not find such method in Accessbridge.jar.
Please help me out.
Best Regards

You might want to check out this thread:
Java Access Bridge and JRE 1.6
If you have Java 6, you'll need to manually install Java Access Bridge 2.0.1. The JAB 2.0.2 installer for Java 6 is also available as a beta:
http://jdk6.java.net/6uNea.html

JPasswordField is not recognized by Java Access Bridge

Hi,
I am using Zoomtext 9.1 Reader/Magnifier for accessibilty purpose with my Swing based application. For communication in between the Zoomtext and Swing application I ma using Java Access Bridge 2.1.
The problem is with JPasswordField. When I am putting focus on the password field it's not reading it out, but when I am typing password in this field, zoom text is reading the typed in alphabet instead of aestrik "*".
The focus behavior for JTextField is working fine.
Also unable to read the Message shown in JOption dialog box.
Could any body help me out?
Thanks in advance.
Here is the sample code to see the behavior:
import javax.swing.*;
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
public class ZoomTest
public static void main(String[] args)
JTextField userName = new JTextField(10);
JPasswordField password = new JPasswordField(10);
JButton submit = new JButton("Submit");
submit.setFocusCycleRoot(true);
JMenuBar jMenuBar = new JMenuBar();
JMenu jMenuFile = new JMenu("File");
jMenuFile.setToolTipText("File");
JMenuItem jMenuItemNew = new JMenuItem("New");
JMenuItem jMenuItemOpen = new JMenuItem("Open");
JMenuItem jMenuItemCopy = new JMenuItem("Copy");
jMenuFile.add(jMenuItemNew);
jMenuFile.add(jMenuItemOpen);
jMenuFile.add(jMenuItemCopy);
jMenuBar.add(jMenuFile);
JLabel userNameLabel = new JLabel("User Name", JLabel.RIGHT);
userNameLabel.setLabelFor(userName);
JLabel passwordLabel = new JLabel("Password", JLabel.RIGHT);
passwordLabel.setLabelFor(password);
final JFrame frame = new JFrame("Login");
JPanel panel = new JPanel( );
panel.setLayout(new GridLayout(3, 2, 5, 5));
panel.add(userNameLabel);
panel.add(userName);
panel.add(passwordLabel);
panel.add(password);
panel.add(submit);
submit.setToolTipText("Submit");
submit.addActionListener(new ActionListener()
public void actionPerformed(final ActionEvent e)
JOptionPane.showMessageDialog(new JFrame(), "Click submit");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setJMenuBar(jMenuBar);
frame.setContentPane(panel);
frame.setVisible(true);
}

After discussion with Zoomtext tech support guys we came to know that Zoomtext 9.1 is not supporting Java Swing applications for accessibility options. So I will recommend not to use Zoomtext for Accessibilty options in any of the Java Swing applications.

Does Java Access Bridge supports Java 6?

Does Java Access Bridge support Java 6?
Also where can I find 2.0.4 (Beta), the following link does not work -
http://java.sun.com/developer/earlyAccess/accessbridge/
thanks,
sachin.

Our company develops an applet that supports Jaws via the Java Access Bridge v.2.01. We've had no problems with JRE 1.6. However, Jaws does not read the accessible names when I tried JRE 1.7. It behaves as if the access bridge is broken. I reverted back to JRE 1.6.0_20 and it works fine again. I reported this to Freedom Scientific but they just said, "you will need to contact the Sun support team to determine the latest version of the JRE recognized by the Accessibility Bridge." They don't seem too concerned that their product may not work for many people in the near future.

How do I install and configure the Java Access Bridge?

I've just installed the Oracle 9i database on this Windows 2000
Pro box with a view to learn what there is to learn about
Oracle. I need to install the Java Access Bridge so that I can
access the Oracle applications. I use a screen reader called
JAWS from Freedom Scientific.
Can anyone please tell me how to install the necessary Access
Bridge components and how to configure things accordingly so
that adaptive software will work correctly with the Oracle
applications.
Adrian

You can do all the networking stuff you need by setting a "bridged" adapter in the VM setup, then configure a valid IP in your guest OS, probably using the same gateway and name servers similar to your host OS.
If you you cannot use a bridged mode adapter because your host network does not support another network card, you can configure a NAT and a host-only adapter in the VM setup as following:
When you configure the network device that corresponds to the NAT device on the on the guest side, set it up to obtain the IP address via DHCP. The NAT device is for outgoing connections to the internet only. VBox will not provide any routing from the outside network to interface behind a NAT device, only via it's own internal DHCP routing.
The host-only adapter is only good for connection between the host and the VM guest. It is primarily designed to provide DHCP like the NAT interface, but does allow a manual configuration, by customizing the "vboxnet0" configuration in the Vbox Network preferences. By default, the IP address range 192.168.56.1 to 192.168.56.100 can be used for manual IP configurations.
It was not mentioned in your requirements, but you need a bridged mode adapter if you want to connect to your guest VM from any other machine beside your host system, e.g. local LAN.

Java Access Bridge and Windows 7 Run as Administrator Mode

I've had to add java access bridge support to a winforms .net application. The application must be run as administrator for certain functions to work on Windows 7. Unfortunately, I've found the JAB breaks when it's run from a program that has been elevated to administrator.
I'm able to reproduce the issue with JavaFerret.exe. Running with a simple double click has no issue tracking mouse events etc, but if I start it via right click "run as administrator" then nothing gets presented in the output window. Can others confirm JavaFeret.exe breaks for them as well in Windows 7 admin mode? Any ideas what's going on and how to work around the issue?

So after a bit of experimenting we've found that as long as the accessibility program that's hosting the JAB and the java program that is being interacted with are both run in administrator mode then the issue goes away.
In our case we were able to launch IE from the accessibility program (which was already in administrator mode), opening the java applet in IE and successfully use the JAB between the two.

Problems with Java Access Bridge

Hello to all,
first of all, sorry if the message is in the wrong place.
I'm developing an application, in C++, to fill up the fields in a Java aplication, it should work on a Windows 7 x64 machine. I'm using jdk 6u29 and java access bridge 2.0.2 for 32 bits soft.
My problem is that in some computers the function isJavaWindow() allways returns false when it it should be true, the most rare thing with it is tha it is working in a virtual machine, and in a clone of this virtual machine it is not working... Is there any special consideration I have to take into account when using Java AccessBridge?
Thank you!
Roger.

Bump... I'd like to know how to click a button with Access Bridge too. I can automate windows programs tho... So, isn't there really anyone who knows how to automate a Java program with C++ and Access Bridge?

Java Access Bridge 1.1 Could not find the main class

When I try to load Java Access Bridge 1.1 I receive the following error:
Could not find the main class. Program will exit.
Does anyone know why?

you must check with the classpath
please see that you have not repeated %classpath%
at the end of the class path like you do in win98.
similiarly with %path%
in win2000 it is automatically taken care off.

Acrobat 9.0 Professional Installer for Windows

I want the Acrobat 9.0 Professional Installer for Windows.

You can download the trial from http://prodesigntools.com/all-adobe-cs5-direct-download-links.html then use your serial number to activate it.
Make sure you follow the Very Important Instructions before proceeding to the actual download.

EBS software or installer for windows 2008 R2 84 bit

Not able to find the oracle EBS software or installer for windows 2008 R2 64 bit operating system. Let me know if Oracle EBS media is available for windows 2008 R2 64bit operating system

Hi;
The Oracle E-Business Suite Rapid Install media for Windows presently only supports an installation on 32-bit Microsoft Windows Server (2003, 2008).
Please see:
Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
Regard
Helios

New OpenAL Installer For Windows 1.

http://developer.creative.com/articles/article.asp?cat=&sbcat=3&top=38&aid=46
Updated Winter 2006 : Version .9.9
The OpenAL Installer for Windows will install the OpenAL . library, enabling support for core OpenAL operations as well as extensions such as EAX and EFX. The installer supports both 32-bit and 64-bit versions of Windows.
DLL Version numbers:
* OpenAL32.dll version 6.4.357.9
* wrap_oal.dll version 2..4.0
Changes and Bugfixes
* Fixed Windows 98 crash bug
* Fixed floating-point related slow-down in "Generic Software" device
* Fixed Source Gain problem on Stereo Buffers.
* OpenAL Router search path now includes Router's directory.
* Windows Vista Default Device and Device Enumeration fixes.
* ALC Capture Extension can now be used independent of playback.

Not an offical mirror, but I have uploaded it anyways.
You can download it here from my webserver.
Thanks.

ITunes 10.2.2, 64 bit installer for Windows 7 - Freezes

I loaded iTunes 10.2.2 (the 64 bit installer for Windows 7) on my laptop, and it continually freezes within 30 seconds of opening. I cannot even get it to load my music files without freezing and I have to close and reopen and start over. I have used previous versions on other computers with no problems. Any suggestions? Thank you.

i dont know how u find the 64 bit file from the apple website
i had googled it before and i still have the link to the 64 bit installer
here is the link where you eill find itunes for 64 bit computer
http://support.apple.com/kb/DL1427
Note: this wont work on 64 bit windows xp.

Where is 64 bit installer for windows 8

Hi!. Does any anyone know where to get the ITunes 64 bit installer for windows 8? Thanks.

Hey...had same issue...have Windows 8 64 bit and just bought an iPod touch.
Had my new iPod connected to W8 laptop andwent toiTunes download page...which correctly detected I had a 64 bit Windows machine...but when the installer ranit gave me this error:
repeated trys gave me the same error...
Success by :
- disconnected iPod from laptop(may not be necessary)
- downloaded iTunes64Setup.exe to my download directory do not run it!
- now right click on iTunes64Setup.exe and select Run as Administrator ->
- hopefully this will work for you too.
Sod

Java Access Bridge 2.0.2 Installer for Windows OS

Similar Messages

Maybe you are looking for