Java and browser issues - anyone use Webtrends?

I switched from pc to mac 2 months ago. Have a website and view my web traffic reports with Webtrends as provided by my host. Both Safari and Firefox use version of Java that don't allow prior/older versions to function. Therefore, the Webtrends reports, which work on an older version of Java, aren't viewable. Apple's suggestion was that I try loading Internet Explorer and using that. Does anyone have any experience with the problem and know of a work-around? There must be loads of web developers who have figured out how to massage this. I'm not a techie or geek by any means, merely a dilettante : ) Any simply explained solutions or suggestions would be appreciated.

The
solution: switching hosts tout d'suite.
That sounds like the best idea. A web host who is using 5 year old software and isn't upgrading? Would make me very nervous. It means they are lazy, cheap or incompetent. Maybe all three. Doesn't inspire confidence that they can keep things going or have any kind of protection at all from hackers. If their security is 5 years old too then just about anyone could walk around in your stuff.

Similar Messages

Domain and Browser Issues

My wife recently developed a website for her art gallery using iWeb. We upload the website using the mobileme client - which uploaded the website with no problems. A couple of days later we purchased a domain: www.intensebluegallery.com and would like to use that exclusively for the site.
Strangely, we can get to her website www.intensebluegallery through the Safari browser - but we're unable to get to the website using Internet Explorer.
Is there something we need to fix? Can anyone help? Thanks a million!

Welcome to the Apple Discussions.
but we're unable to get to the website using Internet Explorer.
What do you get when you try to load your site in IE? Does it just lock up?
IE is notoriously bad when it comes to adhering to web standards for code, etc. and iWeb sticks to them very closely. One of the issues with IE and iWeb sites is the navbar. It is javascript based. One of the suggestions to make iWeb more compatible with IE is to hide the iWeb navbar and create your own Text Based Navbar. However, it can be a pain to update every page if you add a page to the site.
One of our more experienced users here, Roddy, uses Web Site Maestro to optimize his files before uploading to the server. It can reduce a page's size by nearly 40 percent in some cases which is a big help with IE. IE will freeze if a page has a lot of images on it. I've started using it with some of my sites on MobileMe and it will optimize the files and upload only those that have been changed or added.
Look for some of Roddy's posts about Web Site Maestro or about Internet Explorer to get more info on the subject.
OT

Unresponsive Java and further issues.

Hi all,
I'm a student studying Java, and I've been around Java for a while. I've lately put a new computer together and I'm running a legit copy of XP pro on it. Now when I installed Java on it, I had it verified and the website indicated that it has been successfully installed. However, every time I get on a website that uses Java, or I try to run a simple home made program on Java, only an empty window appears with no contents. The size of the window definately varries depending on the size it was designed to. Sometime, I even see java's startup logo an a part of the program shows up. But its usually not in working condition and at that point. All I can do at that point is close it, but then everything in windows becomes non-responsive. None of the icons work, start doesn't work, not even alt-ctrl-del. The only moving thing is my mouse arrow at that point. Then after about 20 seconds the already non-responsive computer freezes completely!
I've not been able to find a reason for this issue around, nor a way to fix it. I would like to know if anybody has any idea what is wrong with this.
Thanks and regards,
Vala

Michael,
Our production server was recently upgraded to 10.1.2.3, CP5 with Java 1.4.2_06. Prior to this upgrade we recommended that users function with I.E. 6.0 and Firefox 2.0. We experienced issues with later browser versions. On my personal workstation I have Windows XP, SP2, I.E. 6.0, Firefox 2.0 and now Java 1.6.0_16. We are now testing the later version of Java on our test OAS. And we are testing out the later browser versions as we speak. The first thing that I would recommend is to add the Java Runtime parameter of -Xmx256M, in the Java Control Panel. I had some session locks prior to my adding this parameter. I am testing access to both servers with Java 6 installed on my workstation. Access to Java 6 performed better after I added the runtime parameters. Access to Java 4 with I.E. gives a warning message and performs very slowly. Mozilla Firefox does to seem to care, no warning and similar performance as Java 6 on the server side. I have not done very much testing with I.E. 7.0 and Firefox 3.0 as of yet with the newer Java version. I am now accessing that environment and it is running very slowly. Part of the issue may be my PC performance but I do not like what I see. Way too slow. This is the browser functionality not the workbook execution time. I added the Java Runtime parameter of
-Xmx256M and it now performs better.
I did the Ctrl-C|Ctrl-V with both I.E. and Firefox and did not experience the problem you discribed. I aslo did not encounter the other problems that you reported. We the corbaserver errors in a Discoverer pop-up window, Java Console or OEM session log?
You may be correct with the SP3 as being at least one of the culprits. I do not have that patch on either workstation so I cannot test for you.
Jerre

[T410] discrete gfx - Problem with Video Card and Windows Aero -anyone using 4Gb memory modules?

[3/3/2010 Update]
There's a issue of using 4Gb sticks on T410 currently that results in video output artifacts and aero interface problems when using Lenovo supplied drivers v8.16.11.8825. I think I can call it confirmed (Three people including me face this issue).
Possible workaround is to install modified EliteBook 8440p video driver (read along this thread) comes with a BIG drawback of not being able to change brightness level within Windows 7. To sweeten it a little bit - you can set luminance level at POST screen, when computer boots up.
[Original Message]
Encountered strange behavoir of my T410.
I have a T410 with 256Mb of Video Memory and 1440x900 display, a T61 with 128Mb of Video Memory and 1400x1050 dsplay and external monitor HP w2338h with 1920x1080 resolution.
If I connect external monitor to my T410 and launch Visual Studio 2010 Beta 2 - image blinks and comes back with Aero disabled. Looking through event logs reveals the lack of memory. Entry information can be found further.
Now If I do the same with my old Thinkpad T61, connect the same monitor using the same cable - I can open as many Visual Studio 2010 Beta 2 instances I like (tried 5) and nothing blinks and Aero stays enabled.
Actually I find ridiculous, a notebook with more VRAM cannot archive the same performance as notebooks with less.
Does anyone know what path should I pursue to solve this issue?
UPDATE: Simply running multiple instances of Visual Studio 2010 Beta 2 without external monitor causes Aero disabled as well.
Log Name:      Application
Source:        Desktop Window Manager
Date:          2/4/2010 7:32:21 PM
Event ID:      9020
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
The Desktop Window Manager has encountered a fatal error (0x8007000e)
Error 2/4/2010 7:32:21 PM Desktop Window Manager 9020 None
Solved!
Go to Solution.

mat3y wrote:
I have the same problem with T410 and aero disabled. I am not using VS and I get this error anyway.
The Desktop Window Manager has encountered a fatal error (0x8007000e).
This must be buggy drivers, on Lenovo download site is just the one and the only initial driver for T410 graphics card.
What software were you actively using when this error occured?
Thinkpad T500-2081 CTO | T9400 2.53GHz | 8 GB RAM | ATI HD3650 + Intel GM45 | 15.4" LED WXGA+ | Windows 8 | ATI Catalyst 13.1 (non-switchable)
Thinkpad 390x | PII 333 | 256mb ram | NeoMagic 256AV | SVGA LCD | OS/2 v4.52

E72 Email and Browser Issue

Hi Guys,
I have recently updated to the newer firmware version in my Nokia E72.. It had been working well for the past few weeks. Now i have a problem in connecting to the internet using my WLAN network in the default web browser. I have added my WiFi connection to the internet group by going thro' Ctrl panel-->Settings-->Connection-->Destinations-->Internet and have also set it as the default connection. In the nokia web browser too, i have selected the access point as "Internet". But whenever i try to access any site, it says, "Connnection not available". What could be that??
As for the issue with the email, it works fine.. i am able to downloiad and view mails.. but i am unable to change the access point settings. I have used my WLAN name as the default access point and unable to change it.
One more thing that I found out just nw is that whenever i use email i.e as long as the WiFi connection remains live via email, i am able to browse the sites using the default web browser. but the moment i disconnect mail, the web browser returns the phrase, "Connection not available" as before. This sounds peculiar..and these two issues are someway connected to another..Doing a hard/soft reset may solve this issue.. but it would be better if someone can help me with a solution to this problem..
Regards
Robert

Was reading this article before. I think RIM is aware of other competing browser's features, so they're taking steps to get the BlackBerry Browser up to date
http://www.internetnews.com/mobility/article.php/3836386/BlackBerry+May+Have+New+Mobile+Browser+by+2...
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Java and Display Issues in Plus

Hi everyone
Please reply whether you have or have not seen any of the following:
I'm working on a client site where we have some machines working just fine and others are giving corbaserver errors. Copying data from a worksheet into Excel using CTRL-C | CTRL-V does not seem to work for some machines and so they have to use the Copy and Paste buttons. Curiously, when they do this they get an additional empty column whereas on the machines where CTRL-C | CTRL-V works they don't get the blank column.
The other issue we are seeing is that after a short period of time, Plus stops running the queries automatically. Any change the user makes, such as adding a new item, adding a sort, moving a column position does not take effect until the Refresh button is clicked.
There is a combination of IE6 and IE7, with all machines being XP with most on SP2 and many on SP3.
I am suspicious of the XP SP3 when combined with IE7 but would like to know whether anyone else has experienced issues. We are running 10.1.2.3 with CP4 and our Java is Sun 1.6.0_15
Please reply with either a we are having no problems with this combination or whether you have noticed similar issues. If you have seen issues and got a fix or workaround please let me know. I'm also interested in knowing which combination of Java, Discoverer, operating system and IE works for you.
Best wishes
Michael

Michael,
Our production server was recently upgraded to 10.1.2.3, CP5 with Java 1.4.2_06. Prior to this upgrade we recommended that users function with I.E. 6.0 and Firefox 2.0. We experienced issues with later browser versions. On my personal workstation I have Windows XP, SP2, I.E. 6.0, Firefox 2.0 and now Java 1.6.0_16. We are now testing the later version of Java on our test OAS. And we are testing out the later browser versions as we speak. The first thing that I would recommend is to add the Java Runtime parameter of -Xmx256M, in the Java Control Panel. I had some session locks prior to my adding this parameter. I am testing access to both servers with Java 6 installed on my workstation. Access to Java 6 performed better after I added the runtime parameters. Access to Java 4 with I.E. gives a warning message and performs very slowly. Mozilla Firefox does to seem to care, no warning and similar performance as Java 6 on the server side. I have not done very much testing with I.E. 7.0 and Firefox 3.0 as of yet with the newer Java version. I am now accessing that environment and it is running very slowly. Part of the issue may be my PC performance but I do not like what I see. Way too slow. This is the browser functionality not the workbook execution time. I added the Java Runtime parameter of
-Xmx256M and it now performs better.
I did the Ctrl-C|Ctrl-V with both I.E. and Firefox and did not experience the problem you discribed. I aslo did not encounter the other problems that you reported. We the corbaserver errors in a Discoverer pop-up window, Java Console or OEM session log?
You may be correct with the SP3 as being at least one of the culprits. I do not have that patch on either workstation so I cannot test for you.
Jerre

New to java and having issues trying to modify sample code.

i was trying to edit the following code to add about 10+ more labels and textfields and save the information to the contacts.dat in the code. it currently displays all the fields i entered, but it only saves the first 7 fields information?? not sure why. also i was trying to just line the fields up using a flowlayout but it just errors. anyone have any suggestions?
<source code below this line>
====================START OF CODE ======================
// cm.java
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.*;
// =========================================================
// Class: cm
// This class drives the contact manager. It contains the
// main method which gets called as soon as this application
// begins to run.
// =========================================================
class cm extends Frame implements ActionListener
// Container of contact objects (one object per business
// contact).
private Vector contacts = new Vector (100);
// List of names component. (Must specify java.awt in
// front of List to distinguish the List class in the
// java.awt package from the List class in the java.util
// package.)
private java.awt.List names = new java.awt.List ();
// delete and edit button components.
private Button delete;
private Button edit;
// Default constructor.
public cm ()
// Assign Contact Manager to title bar of frame window.
super ("Customer Manager Version 0.001 BY Pebkac");
// Add a listener that responds to window closing
// events. When this event occurs (by clicking on the
// close box in the title bar), save contacts and exit.
addWindowListener (new WindowAdapter ()
public void windowClosing
(WindowEvent e)
saveContacts ();
System.exit (0);
// Place an empty label in the north part of the frame
// window. This is done to correct an AWT positioning
// problem. (One thing that you'll come to realize as
// you work with the AWT is that there are lots of bugs.)
Label l = new Label ();
add ("North", l);
// Place the names component in the center part of the
// frame window.
add ("Center", names);
// Create a panel object to hold four buttons.
Panel p = new Panel ();
Button b;
// Add an add button to the Panel object and register
// the current cm object as a listener for button events.
p.add (b = new Button ("add"));
b.addActionListener (this);
// Add a delete button to the Panel object and register
// the current cm object as a listener for button events.
p.add (delete = new Button ("delete"));
delete.addActionListener (this);
// The delete button should be disabled until there is at
// least one contact to delete.
delete.setEnabled (false);
// Add an edit button to the Panel object and register
// the current cm object as a listener for button events.
p.add (edit = new Button ("edit"));
edit.addActionListener (this);
// The edit button should be disabled until there is at
// least one contact to edit.
edit.setEnabled (false);
// Add a quit button to the Panel object and register
// the current cm object as a listener for button events.
p.add (b = new Button ("quit"));
b.addActionListener (this);
// Add the panel object to the frame window container.
add ("South", p);
// Set the background of the frame window container to
// pink (to give a pleasing effect).
setBackground (Color.pink);
// Set the size of the frame window container to 400
// pixels horizontally by 200 pixels vertically.
setSize (400, 200);
// Do not allow the user to resize the frame window.
setResizable (false);
// Load all contacts.
loadContacts ();
// Make sure that the frame window is visible.
setVisible (true);
public void actionPerformed (ActionEvent e)
if (e.getActionCommand ().equals ("delete"))
delete ();
else
if (e.getActionCommand ().equals ("quit"))
saveContacts ();
System.exit (0);
else
if (e.getActionCommand ().equals ("add"))
add ();
else
edit ();
public Insets getInsets ()
// Return an Insets object that describes the number of
// pixels to reserve as a border around the edges of the
// frame window.
return new Insets (10, 10, 10, 10);
public static void main (String [] args)
// Create a new cm object and let it do its thing.
new cm ();
private void delete ()
// Obtain index of selected contact item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot edit
// a contact if no contact item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Remove the contact item from the names component.
names.remove (index);
// Remove the Contact object from the contacts Vector
// object.
contacts.remove (index);
// If there are no more contacts ...
if (contacts.size () == 0)
delete.setEnabled (false);
edit.setEnabled (false);
else
// Make sure that the first contact item in the names
// list is highlighted.
names.select (0);
private void add ()
// Create an add data entry form to enter information
// for a new contact.
DataEntryForm def = new DataEntryForm (this, "add");
// If the bOk Boolean flag is set, this indicates the user
// exited the form by pressing the Ok button.
if (def.bOk)
// Create a Contact object and assign information from
// the form to its fields.
Contact temp = new Contact ();
temp.fname = new String (def.fname.getText ());
temp.lname = new String (def.lname.getText ());
temp.haddress = new String (def.haddress.getText ());
temp.maddress = new String (def.maddress.getText ());
temp.phone = new String (def.phone.getText ());
temp.wphone = new String (def.wphone.getText ());
temp.cphone = new String (def.cphone.getText ());
temp.email = new String (def.email.getText ());
temp.bdate = new String (def.bdate.getText ());
temp.comments = new String (def.comments.getText ());
// Add a new contact item to the names component.
names.add (temp.lname + ", " + temp.fname);
// Add the Contact object to the contacts Vector
// object.
contacts.add (temp);
// Make sure that the delete and edit buttons are
// enabled.
delete.setEnabled (true);
edit.setEnabled (true);
// Destroy the dialog box.
def.dispose ();
// Make sure that the first contact item in the names list
// is highlighted.
names.select (0);
// ===========================================================
// Load all contacts from contacts.dat into the contacts
// Vector object. Also, make sure that the last name/first
// name from each contact is combined into a String object and
// added into the names component - as a contact item.
// ===========================================================
private void loadContacts ()
FileInputStream fis = null;
try
fis = new FileInputStream ("contacts.dat");
DataInputStream dis = new DataInputStream (fis);
int nContacts = dis.readInt ();
for (int i = 0; i < nContacts; i++)
Contact temp = new Contact ();
temp.fname = dis.readUTF ();
temp.lname = dis.readUTF ();
temp.haddress = dis.readUTF ();
temp.maddress = dis.readUTF ();
temp.phone = dis.readUTF ();
temp.wphone = dis.readUTF ();
temp.cphone = dis.readUTF ();
temp.email = dis.readUTF ();
temp.bdate = dis.readUTF ();
temp.comments = dis.readUTF ();
names.add (temp.lname + ", " + temp.fname);
contacts.add (temp);
if (nContacts > 0)
delete.setEnabled (true);
edit.setEnabled (true);
catch (Exception e)
finally
if (fis != null)
try
fis.close ();
catch (Exception e) {}
// Make sure that the first contact item in the names list
// is highlighted.
names.select (0);
// ========================================================
// Save all Contact objects from the contacts Vector object
// to contacts.dat. The number of contacts are saved as an
// int to make it easy for loadContacts () to do its job.
// ========================================================
private void saveContacts ()
FileOutputStream fos = null;
try
fos = new FileOutputStream ("contacts.dat");
DataOutputStream dos = new DataOutputStream (fos);
dos.writeInt (contacts.size ());
for (int i = 0; i < contacts.size (); i++)
Contact temp = (Contact) contacts.elementAt (i);
dos.writeUTF (temp.fname);
dos.writeUTF (temp.lname);
dos.writeUTF (temp.haddress);
dos.writeUTF (temp.maddress);
dos.writeUTF (temp.phone);
dos.writeUTF (temp.wphone);
dos.writeUTF (temp.cphone);
dos.writeUTF (temp.email);
dos.writeUTF (temp.bdate);
dos.writeUTF (temp.comments);
catch (Exception e)
MsgBox mb = new MsgBox (this, "CM Error",
e.toString ());
mb.dispose ();
finally
if (fos != null)
try
fos.close ();
catch (Exception e) {}
private void edit ()
// Obtain index of selected contact item from the names
// component.
int index = names.getSelectedIndex ();
// If no item was selected, index is -1. We cannot edit
// a contact if no contact item in the names component was
// selected - because we would have nothing to work with.
if (index != -1)
// Obtain a reference to the Contact object (from the
// contacts Vector object) that is associated with the
// index.
Contact temp = (Contact) contacts.elementAt (index);
// Create and display an edit entry form.
DataEntryForm def = new DataEntryForm (this, "edit",
temp.fname,
temp.lname,
temp.haddress,
temp.maddress,
temp.phone,
temp.wphone,
temp.cphone,
temp.email,
temp.bdate,
temp.comments);
// If the user pressed Ok...
if (def.bOk)
// edit the contact information in the contacts
// Vector object.
temp.fname = new String (def.fname.getText ());
temp.lname = new String (def.lname.getText ());
temp.haddress = new String (def.haddress.getText ());
temp.maddress = new String (def.maddress.getText ());
temp.phone = new String (def.phone.getText ());
temp.wphone = new String (def.wphone.getText ());
temp.cphone = new String (def.cphone.getText ());
temp.email = new String (def.email.getText ());
temp.bdate = new String (def.bdate.getText ());
temp.comments = new String (def.comments.getText ());
// Make sure the screen reflects the edit.
names.replaceItem (temp.lname + ", " + temp.fname,
index);
// Destroy the dialog box.
def.dispose ();
// Make sure that the first contact item in the names
// list is highlighted.
names.select (0);
// ========================================================
// Class: Contact
// This class describes the contents of a business contact.
// ========================================================
class Contact
public String fname;
public String lname;
public String haddress;
public String maddress;
public String phone;
public String wphone;
public String cphone;
public String email;
public String bdate;
public String comments;
// ==========================================================
// Class: DataEntryForm
// This class provides a data entry form for entering contact
// information.
// ==========================================================
class DataEntryForm extends Dialog implements ActionListener
// bOk is a boolean flag. When true, it indicates that
// the Ok button was pressed to terminate the dialog box
// (as opposed to the Cancel button).
public boolean bOk;
// The following components hold the text that the user
// entered into the visible text fields.
public TextField fname;
public TextField lname;
public TextField haddress;
public TextField maddress;
public TextField phone;
public TextField wphone;
public TextField cphone;
public TextField email;
public TextField bdate;
public TextField comments;
public void actionPerformed (ActionEvent e)
// If the user pressed the Ok button, indicate this
// by assigning true to bOk.
if (e.getActionCommand ().equals ("Ok"))
bOk = true;
// Destroy the dialog box and return to the point
// just after the creation of the DataEntryForm object.
dispose ();
public DataEntryForm (Frame parent, String title)
// Call the other constructor. The current constructor
// is used for add operations. The other constructor
// is used for edit operations.
this (parent, title, "", "", "", "", "", "", "", "", "", "");
public DataEntryForm (Frame parent, String title,
String fname, String lname,
String haddress, String maddress,
String phone,String wphone,
String cphone,String email,
String bdate,String comments)
// Initialize the superclass layer.
super (parent, title, true);
// Choose a grid bag layout so that components can be more
// accurately positioned. (It looks nicer.)
setLayout (new GridBagLayout ());
// Add appropriate first name, last name, phone, wphone, and
// email components to the current DataEntryForm container.
// (Remember, DataEntryForm is a subclass of Dialog.
// Dialog is a container. Therefore, DataEntryForm
// inherits the ability to be a container.)
addComponent (this, new Label ("First Name: "),0, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.fname = new TextField (20);
addComponent (this, this.fname, 1, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("edit"))
this.fname.setText (fname);
addComponent (this, new Label ("Last Name: "), 0, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.lname = new TextField (20);
addComponent (this, this.lname, 1, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("edit"))
this.lname.setText (lname);
addComponent (this, new Label ("Home Address: "), 0, 2, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.haddress = new TextField (20);
addComponent (this, this.haddress, 1, 2, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("edit"))
this.haddress.setText (haddress);
addComponent (this, new Label ("Mailing Address: "), 0, 3, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.maddress = new TextField (20);
addComponent (this, this.maddress, 1, 3, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("edit"))
this.maddress.setText (maddress);
addComponent (this, new Label ("Home Number: "), 0, 4, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.phone = new TextField (20);
addComponent (this, this.phone, 1, 4, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("edit"))
this.phone.setText (phone);
addComponent (this, new Label ("Work Number: "), 0, 5, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.wphone = new TextField (20);
addComponent (this, this.wphone, 1, 5, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
if (title.equals ("edit"))
this.wphone.setText (wphone);
addComponent (this, new Label ("Cell Number: "), 0, 6, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.cphone = new TextField (20);
addComponent (this, this.cphone, 1, 6, 1, 1,
GridBagConstraints.WEST,
GridBagConstraints.WEST);
addComponent (this, new Label ("Email Address: "), 0, 7, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.email = new TextField (20);
addComponent (this, this.email, 1, 7, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
addComponent (this, new Label ("Birth Date: "), 0, 8, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.bdate = new TextField (20);
addComponent (this, this.bdate, 1, 8, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
addComponent (this, new Label ("Comments: "), 2, 0, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
this.comments = new TextField (20);
addComponent (this, this.comments, 2, 1, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
addComponent (this, new Label (""), 0, 9, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
addComponent (this, new Label (""), 1, 9, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.WEST);
Button b;
// Add an Ok button to this container.
addComponent (this, b = new Button ("Ok"), 0, -9, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
b.addActionListener (this);
// Add a Cancel button to this container.
addComponent (this, b = new Button ("Cancel"), 1, -9, 1, 1,
GridBagConstraints.NONE,
GridBagConstraints.CENTER);
b.addActionListener (this);
// Set the background of the frame window container to
// pink (to give a pleasing effect).
setBackground (Color.pink);
// Set the size of the dialog window to 250 pixels
// horizontally by 200 pixels vertically.
setSize (450, 500);
// Do not allow users to resize the dialog window.
setResizable (false);
// Make sure that the dialog window is visible.
setVisible (true);
private void addComponent (Container con, Component com,
int gridx, int gridy,
int gridw, int gridh, int fill,
int anchor)
// Get the current layout manager. It is assumed to
// be a GridBagLayout object.
LayoutManager lm = con.getLayout ();
// Create a GridBagConstraints object to make it
// possible to customize component positioning.
GridBagConstraints gbc = new GridBagConstraints ();
// Assign the x and y grid positions.
gbc.gridx = gridx;
gbc.gridy = gridy;
// Assign the number of grid blocks horizontally and
// vertically that are occupied by the component.
gbc.gridwidth = gridw;
gbc.gridheight = gridh;
// Specify the component's resize policy (fill) and
// the direction in which the component is positioned
// when its size is smaller than available space (anchor).
gbc.fill = fill;
gbc.anchor = anchor;
// Set the new constraints that the grid bag layout
// manager will use.
((GridBagLayout) lm).setConstraints (com, gbc);
// Add the component to the container.
con.add (com);
// ===========================================================
// Class: MsgBox
// This class displays a message box to the user. The message
// is usually an error message. The user must press the Ok
// button to terminate the message box.
// ===========================================================
class MsgBox extends Dialog implements ActionListener
public void actionPerformed (ActionEvent e)
// Terminate the dialog box in response to the user
// pressing the Ok button.
dispose ();
public MsgBox (Frame parent, String title, String msg)
// Initialize the superclass layer.
super (parent, title, true);
// Store the msg argument in a Label object and add
// this object to the center part of the dialog window.
Label l = new Label (msg);
add ("Center", l);
// Create a Button object and add it to the south part
// of the dialog window.
Button b = new Button ("Ok");
add ("South", b);
// Make the current object a listener to events that
// occur as a result of the user pressing the Ok
// button.
b.addActionListener (this);
// Make sure that the Ok button has the focus.
b.requestFocus ();
// Do not allow users to resize the dialog window.
setResizable (false);
// Allow the layout manager to choose an appropriate
// size for the dialog window.
pack ();
// Make sure that the dialog window is visible.
setVisible (true);
====================END OF CODE =======================

You should first start by formatting the code before
posting. I lost my interest as I browsed thorugh the
code.
Read here -
http://forum.java.sun.com/help.jspa?sec=formatting
...and its way too much code to expect anyone to read. Post a short excerpt of the part you are having trouble with.

LVOOP and RT Issues - Anyone seen these?

I'm seeing two potentially unrelated issues in my current application. One is minor ... the other is (potentially) life threatening to my system ...
First, some background .... I'm in the middle of a large development project (Windows for the GUI, PXI-RT for ... well, everything else). This is also a very heavy OOP project. We are using LVClasses for as the messages being transferred between modules (individual paralell vis) and the TCP Communcation Engine, as well as for configuration and data file management. From an architectural standpoint, this system is basically a "Hub and Spoke" model where there is a Hub that recieves and directs messages from all the spokes.
so issue #1 ... during development when I deploy my RT to my PXI (all I'm doing is clicking the run arrow) the front panels of certain vis open DURING the deployment process. One of them does have the front panel set to "open when called" while I'm doing my debug. The other is a the front panel of a dynamiclly spawned clone that I don't need or really want to see most of the time. since they are opened during deployment and not when called, then don't close at the end of execution either.
and onto #2, this one is a problem ... fairly scary one. When I deploy said RT system by clicking the "run" arrow I'll get to some point in the deployment process and I'll get a fatal error "F146640: Thread Stack Overflow." I've done some looking into this, and I highly doubt this is related to the on KB article I could find (Real-Time Fatal Kernel Error 146640 at Boot Up) because this isn't happening on boot-up of the system, but rather on deployment.
That specific error says that if I have the serial console activated (right now I'm only using a monitor hooked up to the PXI DVI port) I can possibly download more error information, so I'll try to find a null-modem cable and see if I can't make that work. If anyone has seen this or something like this I'd love to hear about it. We are leaning in the direction that these issues are LVOOP related because we've never seen them before, and this "isn't our first rodeo" on an app like this. I'm not pointing fingers ... I love LVOOP ... I just need it to work ...

I'm glad you were able to find the cause of the fatal kernel error by closing your references. Did you ever create a service request for troubleshooting this issue? If so, do you have a reference number that I can look at?
Also, can you post your project that has the Front Panels opening upon deployment? I have personally never seen this type of behavioir occur and am curious to see if I can reproduce it. What is your host computer and what is your target? Do the changes that you make seem to be of the same type (moving a control or adding a VI of a certain type etc?).
Stephanie O.
DIAdem Product Manager
National Instruments

Open connections between AS Java and AS ABAP when using JRA

Hi, we have a problem with open connections and hope that someone here could give me hint where to find a solution.
The situation is that we open a connection from a Java application to an AS ABAP. In detail, the application first connects to a statefull session bean on the AS Java by RMI. The bean communicates with the associated AS ABAP by the Java Resource Adapter (JRA).
All interactions between all components work correctly. But even after we close the application, manually close of the connections (on side of the AS Java) , remove all created and used session beans there are still open connections between the AS ABAP and the AS Java.
The transaction smgw (Gateway Monitor) shows open connections from jlaunch to our local SAP gateway using the internal communication protocol. Obviously, the established connections are not closed, even when they are open for a week or longer.
After opening 100 connections, the AS ABAP denies additional connection attempts.
We have been able to close all open connections by restarting the AS Java or by restarting the Connector over the Visual Administrator (path: Cluster Server Services Connector Container select the right connector stop / start).
We have developed our application similar to the tutorial from [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4]
Can someone explain to us why the connections stay open for so long? Is there no timeout mechanism? Or is there some way to close the connections from our Java application?

Hello,
maybe someone can help us with our problem.
We have developed our application similar to the tutorial from https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4 and it was running without problem with the SP12, now we change our system to SP16 and we are having the problem described in note 1083348, but as you can see, for us it was working with SP12 and now it doesn't work with SP16....
Here is part of our code....
    public List getAll() {
        String functionName = "bla";
        try {
            openConnection();
            MappedRecord response = (MappedRecord) interaction.execute(null, request);
            MappedRecord record = (MappedRecord) response.get("E_S_RETURN_CODE");
            if (((String) record.get("RETURN_CODE")).equalsIgnoreCase("E")) {
                throw new SQLException((String) record.get("RETURN_TXT"));
        catch (ResourceException exc) {
            throw new EJBException(".");
        catch (SQLException exc) {
            throw new EJBException(".");
        finally {
            closeConnection();
    protected void openConnection() {
        try {
            connection = connectionFactory.getConnection();
            interaction = connection.createInteraction();
        catch (ResourceException exc) {
            interaction = null;
            connection = null;
            throw new EJBException(getExceptionText(exc));
protected void closeConnection() {
       try {
            if (interaction != null) {
                interaction.close();
            if (connection != null) {
                connection.close();
        catch (ResourceException exc) {
            throw new EJBException(".");
With that code we are getting this error: "Connection handle is already closed and no longer associated with a managed connection" everytime we try to close the connection in the method closeConnection().
We were thinking that maybe we should not close the connections, because the were already close, and tried not to close the connection (connection.close()), but then after a few time we are getting the following error, because we are not closing the connections:
Connection to ABAP System could not be opened, because the Connection Factory returns "Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "eis/..." is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.". Please check the connection defined for the Connection Factory of the Java Resource Adapter with JNDI name...
Any help?

Very Urgent: Deleting Batch from STO and Goos Issue reversal Using BAPI

Hi,
I want to delete outbound delivery for particular shipment number and this should be done using BAPI or a FM not using the tcode VL02N.
I wld be very grateful
Please List out the BAPI 's or FM that can be used for to perform these listed , with using Tcodes:
1) REVERSE BILLING DOCUMENT(VF11)
2) GOODS ISSUe REVERSAL (VL09N)
3) REMOVE DELIVERY FROM SHIPMENT (VT02N)
4) DELETING DELIVERY(VL02N)
5) REMOVE BATCH FROM STO (ME22N)
Its very urgent..
Thank you in advance....

1) REVERSE BILLING DOCUMENT(VF11)
BAPI_BILLINGDOC_CANCEL
2) GOODS ISSUe REVERSAL (VL09N)
BAPI_GOODSMVT_CANCEL
3) REMOVE DELIVERY FROM SHIPMENT (VT02N)
BAPI_SHIPMENT_CHANGE
4) DELETING DELIVERY(VL02N)
5) REMOVE BATCH FROM STO (ME22N)
BAPI_PO_CHANGE

Task Sequence Windows Server 2012 format and partition issue when using MDT2012

Hi all,
Currently I'm working on a task sequence to deploy a Windows Server 2012 image. We've integrated MDT2012 Update 1 in SCCM2012 SP1 and created a default 'Server Task Sequence'. This task sequence deploys the install.wim to a server which has multiple disks
attached.
We've configured multiple format and partition disk steps to create the following partition layout:
Disk 0: 499MB BDEDrive (do not assign drive letter) + 40GB OSDisk
Disk 1: 40GB Programs
Disk 2: 40GB Data
Disk 3: 25GB User
When the task sequence is finished I've noticed the drive letters assigned to the disk are not correct. In some cases the BDEdrive gets drive letter D assigned, sometimes drive letters are assigned starting with E, thus skipping drive
letter D.
The smsts.log files show an error when it's re-assigning drive letters after booting into Windows. Looks like an error in the DiskPartScript.txt.
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="16:59:40.889-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="osdsetuphook.cpp:186">
<![LOG[Executing task sequence]LOG]!><time="16:59:40.905-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="16:59:40.920-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Debug shell is enabled]LOG]!><time="16:59:43.806-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1440">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1462">
<![LOG[Re-assign all drive letters...]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="diskutils.cpp:1941">
<![LOG[Executing command line: "C:\WINDOWS\system32\diskpart.exe" /s "C:\WINDOWS\TEMP\DiskPartScript.txt"]LOG]!><time="16:59:43.900-120" date="05-10-2013" component="OSDSetupHook" context=""
type="1" thread="776" file="commandline.cpp:827">
<![LOG[Process completed with exit code 2147942487]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="commandline.cpp:1123">
<![LOG[Diskpart.exe STDOUT:
Microsoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: SRV03
Volume 1 is the selected volume.
DiskPart successfully removed the drive letter or mount point.
The volume you selected is not valid or does not exist.
There is no volume selected.
]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="3" thread="776" file="diskutils.cpp:1807">
When I take a look at the generated diskpart_script.log file the volume D gets selected twice, which fails the second time because of the first remove drive letter command.
This is the output in the diskpart_script.log file:
select volume D
remove letter=D
select volume D
remove letter=D
select volume E
remove letter=E
select volume F
remove letter=F
select volume H
remove letter=H
select disk 0
select partition 1
assign
select disk 1
select partition 1
assign
select disk 2
select partition 1
assign
select disk 3
select partition 1
assign
It seems this error is caused by the first 'Format and Partition Disk' step before the 'Use Toolkit Package' step which is part of the default Server Task sequence. When I disable this Format and Partition step and create the partition manually
all looks ok showing no errors in the smsts.log file.
I've solved this by replacing the first 'Format and Partition Disk' step by an Powershell command which formats and partitions the disk.
Anyone seen this behavior?

I have a similar problem when I install windows on some clients. Have you found any explanation for the behavior?

How to open acrobat in java and compare two files using javacode

I am absolutely new to use acrobat software in Java. I want to open two pdf files at a time and then compare the differences between them thru java program .
i am not sure how to do it. iam trying many ways without success.
I used jre and could open open files using runtime method , but couldn't do comaparision. i..e could't access tools menu (alt+t) Compare two files and <enter>. help in java will be appreciated.
Pls guide me the steps to use the acrobat library. At http://partners.adobe.com/asn/acrobat i found supporting vb and vc only.
Any help or links are greatly appreciated.

iText is an open source PDF library, reads a PDF one page at a time. You could check it out. I've used it for writing/splitting/concatenating PDFs, but not comparing files
http://www.lowagie.com/iText/
Scott
http://www.swiftradius.com

Plug-based NAS and webserver devices: anyone used one?

I've been reading a bit about using 'Sheeva'-based devices for Internet-access/NAS-server use; the most commonly quoted one is the 'Pogoplug'. This seems to allow access to any attached USB HDDs from across the 'Net by diverting the access through Pogo's own web-site. Other similar devices - Tonidoplug and Sharkoon LANport seem to offer the NAS service but not the 'net access (I might be wrong on my details so please correct me).
Has anyone here used any of these either as NAS boxes or Web servers and what can you say about them, please?

A bare hard drive mechanism is self-contained and sealed, so there is no problem with it being bare. However, if you have curious cats that can walk on your desk, you may want to have the drive in an enclosure because there are more exposed connectors that a cat may want to nibble on (and possibly yank out). Actually, you still have a USB cable and power adapter cable, even if you had a case.
If you have an available the FireWire port, and a shortage of USB ports, you might as well use the FireWire port. For use with Time Machine, a less expensive FireWire 400 drive is fine, but since your iMac has a FireWire 800 port, you may want to get a drive with FireWire 800. If you get a drive with FireWire 400, you will have to spend another $10 or so for an 800 (9-pin) to 400 (6-pin) adapter.
Are the OWC enclosures that much better for simple use with time machine?
OWC offers good external drives. But any USB or FireWire drive will be fine for use with Time Machine. The mechanism inside is the more important point. I like OWC because they sell most of their enclosures empty, and I can select and buy the hard drive separately. Macally sells their cases empty as well. They seem to have a version of drive you looked at with FireWire 800.
http://www.macally.com/EN/Product/ArticleShow.asp?ArticleID=255

GX70 having problem FPS ISSUE anyone using GX70 come this topic please!!!!

i am having FPS issue problem on need for speed rival and assassin creed 4 black flag.the FPS will drop to 20 below.However,i played battle field 4 the FPS smooth like 30~50.i already updated latest AMD driver.it is any GX70 user same as me ?anyone know how to fix it ?

years of related party transactions
has been,coach outlet locations, affiliated transactions Chengde Lulu disclosed relates to before and after the two shareholders,coach outlet store, namely Hebei Lulu Group and its affiliated people from Zhejiang and universal group and its affiliated person:
complex of related party transactions
recommended reading Yang Wenjun stepped down as president Sun Yiping took over as Mengniu COFCO real estate real estate inventory of over 5 trillion and edible oil prices again interviewed enterprises signal operators Casco response accident of Beijing construction industry labor contract out [Photos] Xiao Che after divorce denied the 300000000 breakup fee [Warren hegemony] trading King surfaced Xin Yue: the central bank must drop three. The big reason
and the corresponding management company, is not a major change.
June 10,hogan interactive, 2010, 1 increase in the 2009 annual general meeting of shareholders of the temporary proposal announcement that Chengde Lulu (000848) board of directors quietly changed: the board of directors introduced the original universal group financial department head of the group Lu Yongming as director, the change of the independent director since 2, 9 board with Lulu Group members of the board of directors only background the remaining 2; the board of supervisors and the introduction of universal group background instead of the original Liu Zhigang Gong Wenjun, 3 supervisors and 2 with Wanxiang Group background.
the source, tube replaced Wang Baolin as chairman of Chengde lulu. The original Chengde Lulu vice chairman, has served as director of Wanxiang Group Assistant General Manager and general manager office,scarpe hogan outlet, the universal group vice president of Tonglian capital holdings of president of limited company president, Denon universal Limited by Share Ltd, in the nearly 4 years after universal holding Chengde Lulu, finally a full range of acquired control of the company.
,Hollister UK stores, former Chengde Lulu Lulu Group Chairman Wang Baolin as the holding company Beijing Lulu Beverage Co.,piumini moncler, Ltd. (hereinafter referred to as the Beijing Lulu) object commodity procurement legal representative,michael kors purses, Shantou high tech Zone for Lulu Nanfang company legal representative; almond procurement Lingyuan almond processing plant,coach outlets, its legal representative for their relatives; object tin cans procurement of Langfang Kai Hong packing container Co. Ltd.,coach outlet online store, the legal representative is also their relatives; the other is the controlling shareholder of Wanxiang Group and its affiliated person,coach outlets, which exists as the Chengde Lulu financial services institutions; Vice President Wang Xuchang and Chengde Lulu: he served as Chengde Lulu holding company Langfang Lulu Beverage Company Limited (hereinafter referred to as Langfang. The legal representative of the purchaser); Chengde County almond Day Food Co.,coach outlet store, Ltd.,hollister, the legal representative is the family of Wang Yinchang. All along, Wang Xuchang served as executive position. The successive Lulu Group branch deputy director of the people, in 2008 the buyback and cancellation of the Lulu Group holds 20% of the shares in the listing Corporation, and the transfer of control will still be maintained the existing status, and the related transactions Chengde Lulu is maintained at a stable level. Page first: complex of related party transactions second pages: 2007-2009 Chengde Lulu part connected transaction list
Chairman and
相关的主题文章：
Investment in railway Jinniu energy layout Mongolian coal
Leading technology in oil Jin Hong turned the pipeline operators
Dr. Peng participate the Great Wall of broadband Internet over 50% of the equity
Social Security Bureau on "people's parity pharmacies" violations investigation and verification, after collecting evidence, found the store display and sell soap, shampoo, toothpaste, washing powder, soap and other daily necessities, and a transmission machine account for the compound Danshen dripping pills, hydrogen sulfate clopidogrel and other medical insurance drugs.

TS3276 PostBox and iCloud - does anyone use pop mail for postbox and icloud? i can't seem to use my MAC pop mail with postbox.

Apple policy of reseting each time you forget an Account ID or Password makes it impossible for me to keep track of my many accounts on Mail. I decided to use PostBox and it's working great except for one account. That account is linked to icloud. I'm not too happy with icloud, in general, but I do want to be able to track my mail on my iphone for that one account (my business account). It used to be that I could use 2 accounts with one - using an alias. Now, I can't do that with icloud, nor can I get it linked to PostBox. Does anyone know what I should do? Am I asking the wrong questions?

I am now on Chapter 3 & 4 - Since this is the ONLY message board I can get into,
& Roger, No, I never had a "mobile me account", if that's a cell phone - wouldn't own one! - IF it was from the Old Tiger mail Ap, I do believe it was discontinued, when they came out with Snow Lion, no? So that's defunct. FYI I got my first computer in 1991 - DOS, good stuff, easy to fix. My first mac in 2006 Tiger, great stuff, loved it. Then Snowleopard, not sure when, maybe '09? it was just before Lion came out, didn't know the new one would come so soon. & in June 2012, first mac crashed, lost a year "unsaved" data.
Q # 1. I can't get into My Account - to get into support & any questions! Somehow all my data is messed up, & I've had to change passwords 3 times today every time I'm "rejected" by my account. I seem to have 3 accounts now, each with a different name Password, & Security Questions! & I've been rejected due to: "Incorrect ID name", "Incorrect Password" & because whatever - doesn't" recognize my birth date" / or "my Security question answers" that I chose - all of which I know are correct. AGUH!
My latest problems:
1) Can you Unzip iPhotos, uploaded from a USB or External Drive (after my SL crashed)? The dpi for these old ones is about 250 x 360 (88 KB) compared to 2448 x 3264 (2.6 MB) for recent ones.
- Do you need a program to do this? Some say there's a "free" program, any good? Can unzip be done to many or 1 at a time? Or is there something I haven't found in iPhoto '11, 9.2.1 (Lion)?
[I now buy new Camera Memory cards & don't delete the photos anymore, since I lost so many.]
2) Can I combine all 3 of my Apple ID info - or at least delete that 4 year old Email address in my profile? (IF I can ever get in. I wrote a "suggestion" to the Apple folks, who said my new Email was on it, & they'd send me an email - but I never got it, guess it went to the old one?

Java and browser issues - anyone use Webtrends?

Similar Messages

Maybe you are looking for