Java API for Error Handling

There are some common error tables storing error IDs information ( IDs like error type, project id, interface id, message id etc.) in Operational Database (is not on source or target system) which we have to update using java API. We need to call java API (java code) whenever error occurs. We have to provide all the IDs to this function and then API will take care of DB updating. We can call java API in mapping program by creating user-defined java function, this will trap all the errors which are in source file as well as in mapping and mapping lookup. Query is:
A- A- Do we have any other place after the mapping to call this java API and trap the errors through it?
B- Can we call Java API using BPM and pass error IDs to it.

Hi Anand,
You Have to write Module For that(if you wanna call Java API after Mapping)at the receiver.
To write Module Here is a link which will help you in.....
==>http://help.sap.com/saphelp_nw04s/helpdata/en/84/2e3842cd38f83ae10000000a1550b0/frameset.htm
==>http://help.sap.com/saphelp_nw04s/helpdata/en/e4/6019419efeef6fe10000000a1550b0/frameset.htm
==>http://help.sap.com/saphelp_nw04s/helpdata/en/f4/0a1640a991c742e10000000a1550b0/frameset.htm
Enjoy Coding....:)
Regards,
Sundararamaprasad.

Similar Messages

Bursting with JAVA APIs / MultiThreading / Errors Handling

We are trying to use the bursting JAVA APIs 10.1.3.3.1 Standalone) to burst huge XML files and generate PDF Files from RTF templates. Here are a list of our issues with this feature:
1. We have some problems catching the errors when bursting. We have tried to use the "oracle.apps.xdo.common.log.Logger" class, but it is not always reacting like we think it should. Could you please give us an exemple of a clean bursting error catching or a brief description of how we could do it. We have a lot of difficulties to find information about using the JAVA APIs of BIP.
2. Is it a clean way of catching the bursting errors to use the "oracle.apps.xdo.common.log.Logger" class?
3. When using the 10.1.3.3.1 DocumentProcessor JAVA API, the process gets killed when the RTF template is not where the control file specified it. Even when using a finally clause containing the document processor, we can't fetch the error from the "oracle.apps.xdo.common.log.Logger" class. We did not find a way to catch this error which make our program crash.
4. How can we enable multi-threading that is included in the DocumentProcessor JAVA APIs so it can take advantage of the multi-processors environnements?

1. Check tim d. blog, you can use the bursting listners to get the errors. It's also in the documentation.
First, on every exception, the Bursting APIs are dumping the error in the Logger. So I can't see how we can use the listeners to catch these. We can check the hasExceptions on the Logger but still, we have some problems with this. When we deploy our application as a MDB (Message driven bean), it seems that once the hasException flag has been raised, if we call the MDB again, it is still up. Is there documentation about that Logger class? Also, I'm worried that we won't be able to call our MDB twice to run simultaneously 2 different bursting process since it seems the Logger is something static, keeping every exception in memory... That's bad.. And show me where you have found documentation about this. All I see in documentation is how to call the DocumentProcessor in a couple of lines. I don't see anything about a clean way to catch errors.
2. Yes/No/Depends. I think it's fine. If your changing the logger options in your program that could come back to haunt you.
I guess so, I'm not changing anything and its already haunting me...
3. When using the 10.1.3.3.1 DocumentProcessor JAVA API, the process gets killed when the RTF template is not where the control file specified it. Even when using a finally clause containing the document processor, we can't fetch the error from the "oracle.apps.xdo.common.log.Logger" class. We did not find a way to catch this error which make our program crash.
Even worst, when we deploy the component has an MDB, when the error happens, it kills the whole oc4j container... please correct this quick.
4. How can we enable multi-threading that is included in the DocumentProcessor JAVA APIs so it can take advantage of the multi-processors environnements?
We got an answer from the dev team which is to add two properties to the document processor, something like:
enable-multithreading: true
thread-count: >2
We did that and what we got is that the process started and it got stuck in a dead lock at the first document processing. How nice! :)
We got a milestone in March and I'm really worried about all those problems... Not enough documentation, a pretty bad error handling, errors making crash the whole oc4j container, Logger seems not to be handling simultaneous calls/ threads, not even handling two subsequent calls... etc.
If anyone has the magic answer, it would be pretty welcomed!
Thanks

Java API for running entire ".sql" files on a remote DB ( mySQL or Oracle)?

Hi,
Would anyone happen to know if there's a java API for executing entire ".sql" files (containing several different SQL commands), on a remote database server ?
It's enough if the API works with MySQL and/or Oracle.
Just to demonstrate what i'm looking for:
Suppose you've created sql file "c:/test.sql" with several script lines:
-- test.sql:
insert into TABLE1 values(3,3);
insert into TABLE1 values(5,5);
create table TABLE2 (name VARCHER) ENGINE innoDB; -- MYSQL specific
Then the java API should look something like:
// Dummy java code:
String driver="com.mysql.jdbc.Driver";
String url= "jdbc:mysql://localhost:3306/myDb";
SomeAPI.executeScriptFile( "c:/test.sql", driver, url);
Thanks.

No such a API, but it's easy to parse all sqls in a file, then run those command:
For instance:
import java.sql.*;
import java.util.Properties;
/* A demo show how to load some sql statements. */
public class testSQL {
private final static Object[] getSQLStatements(java.util.Vector v) {
Object[] statements = new Object[v.size()];
Object temp;
for (int i = 0; i < v.size(); i++) {
temp = v.elementAt(i);
if (temp instanceof java.util.Vector)
statements[i] = getSQLStatements( (java.util.Vector) temp);
else
statements[i] = temp;
return statements;
public final static Object[] getSQLStatements(String sqlFile) throws java.
io.IOException {
java.util.Vector v = new java.util.Vector(1000);
try {
java.io.BufferedReader br = new java.io.BufferedReader(new java.io.
FileReader(sqlFile));
java.util.Vector batchs = new java.util.Vector(10);
String temp;
while ( (temp = br.readLine()) != null) {
temp = temp.trim();
if (temp.length() == 0)
continue;
switch (temp.charAt(0)) {
case '*':
case '"':
case '\'':
// System.out.println(temp);
break; //Ignore any line which begin with the above character
case '#': //Used to begin a new sql statement
if (batchs.size() > 0) {
v.addElement(getSQLStatements(batchs));
batchs.removeAllElements();
break;
case 'S':
case 's':
case '?':
if (batchs.size() > 0) {
v.addElement(getSQLStatements(batchs));
batchs.removeAllElements();
v.addElement(temp);
break;
case '!': //Use it to get a large number of simple update statements
if (batchs.size() > 0) {
v.addElement(getSQLStatements(batchs));
batchs.removeAllElements();
String part1 = temp.substring(1);
String part2 = br.readLine();
for (int i = -2890; i < 1388; i += 39)
batchs.addElement(part1 + i + part2);
for (int i = 1890; i < 2388; i += 53) {
batchs.addElement(part1 + i + part2);
batchs.addElement(part1 + i + part2);
for (int i = 4320; i > 4268; i--) {
batchs.addElement(part1 + i + part2);
batchs.addElement(part1 + i + part2);
for (int i = 9389; i > 7388; i -= 83)
batchs.addElement(part1 + i + part2);
v.addElement(getSQLStatements(batchs));
batchs.removeAllElements();
break;
default:
batchs.addElement(temp);
break;
if (batchs.size() > 0) {
v.addElement(getSQLStatements(batchs));
batchs.removeAllElements();
br.close();
br = null;
catch (java.io.FileNotFoundException fnfe) {
v.addElement(sqlFile); //sqlFile is a sql command, not a file Name
Object[] statements = new Object[v.size()];
for (int i = 0; i < v.size(); i++)
statements[i] = v.elementAt(i);
return statements;
public static void main(String argv[]) {
try {
String url;
Object[] statements;
switch (argv.length) {
case 0: //Use it for the simplest test
case 1:
url = "jdbc:dbf:/.";
if (argv.length == 0) {
statements = new String[1];
statements[0] = "select * from test";
else
statements = argv;
break;
case 2:
url = argv[0];
statements = getSQLStatements(argv[1]);
break;
default:
throw new Exception(
"Syntax Error: java testSQL url sqlfile");
Class.forName("com.hxtt.sql.dbf.DBFDriver").newInstance();
//Please see Connecting to the Database section of Chapter 2. Installation in Development Document
Properties properties = new Properties();
Connection con = DriverManager.getConnection(url, properties);
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY);
//Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE,ResultSet.CONCUR_UPDATABLE);
// stmt.setMaxRows(0);
stmt.setFetchSize(10);
final boolean serializeFlag = false;//A test switch to serialize/deserialize the resultSet
ResultSet rs;
for (int i = 0; i < statements.length; i++) {
if (statements[i] instanceof java.lang.String) {
String temp = (java.lang.String) statements;
switch (temp.charAt(0)) {
case 'S':
case 's':
case '?':
System.out.println(temp);
rs = stmt.executeQuery(temp);
if (serializeFlag) {
// serialize the resultSet
try {
java.io.FileOutputStream fileOutputStream = new
java.io.FileOutputStream("testrs.tmp");
java.io.ObjectOutputStream
objectOutputStream = new java.io.
ObjectOutputStream(fileOutputStream);
objectOutputStream.writeObject(rs);
objectOutputStream.flush();
objectOutputStream.close();
fileOutputStream.close();
catch (Exception e) {
System.out.println(e);
e.printStackTrace();
System.exit(1);
rs.close(); //Let the CONCUR_UPDATABLE resultSet release its open files at once.
rs = null;
// deserialize the resultSet
try {
java.io.FileInputStream fileInputStream = new
java.io.FileInputStream("testrs.tmp");
java.io.ObjectInputStream objectInputStream = new
java.io.ObjectInputStream(
fileInputStream);
rs = (ResultSet) objectInputStream.
readObject();
objectInputStream.close();
fileInputStream.close();
catch (Exception e) {
System.out.println(e);
e.printStackTrace();
System.exit(1);
ResultSetMetaData resultSetMetaData = rs.
getMetaData();
int iNumCols = resultSetMetaData.getColumnCount();
for (int j = 1; j <= iNumCols; j++) {
// System.out.println(resultSetMetaData.getColumnName(j));
/* System.out.println(resultSetMetaData.getColumnType(j));
System.out.println(resultSetMetaData.getColumnDisplaySize(j));
System.out.println(resultSetMetaData.getPrecision(j));
System.out.println(resultSetMetaData.getScale(j));
System.out.println(resultSetMetaData.
getColumnLabel(j)
+ " " +
resultSetMetaData.getColumnTypeName(j));
Object colval;
rs.beforeFirst();
long ncount = 0;
while (rs.next()) {
// System.out.print(rs.rowDeleted()+" ");
ncount++;
for (int j = 1; j <= iNumCols; j++) {
colval = rs.getObject(j);
System.out.print(colval + " ");
System.out.println();
rs.close(); //Let the resultSet release its open tables at once.
rs = null;
System.out.println(
"The total row number of resultset: " + ncount);
System.out.println();
break;
default:
int updateCount = stmt.executeUpdate(temp);
System.out.println(temp + " : " + updateCount);
System.out.println();
else if (statements[i] instanceof java.lang.Object[]) {
int[] updateCounts;
Object[] temp = (java.lang.Object[]) statements[i];
try {
for (int j = 0; j < temp.length; j++){
System.out.println( temp[j]);
stmt.addBatch( (java.lang.String) temp[j]);
updateCounts = stmt.executeBatch();
for (int j = 0; j < temp.length; j++)
System.out.println((j+1)+":"+temp[j]);
for (int j = 0; j < updateCounts.length; j++)
System.out.println((j+1)+":" +updateCounts[j]);
catch (java.sql.BatchUpdateException e) {
updateCounts = e.getUpdateCounts();
for (int j = 0; j < updateCounts.length; j++)
System.out.println((j+1)+":"+updateCounts[j]);
java.sql.SQLException sqle = e;
do {
System.out.println(sqle.getMessage());
System.out.println("Error Code:" +
sqle.getErrorCode());
System.out.println("SQL State:" + sqle.getSQLState());
sqle.printStackTrace();
while ( (sqle = sqle.getNextException()) != null);
catch (java.sql.SQLException sqle) {
do {
System.out.println(sqle.getMessage());
System.out.println("Error Code:" +
sqle.getErrorCode());
System.out.println("SQL State:" + sqle.getSQLState());
sqle.printStackTrace();
while ( (sqle = sqle.getNextException()) != null);
stmt.clearBatch();
System.out.println();
stmt.close();
con.close();
catch (SQLException sqle) {
do {
System.out.println(sqle.getMessage());
System.out.println("Error Code:" + sqle.getErrorCode());
System.out.println("SQL State:" + sqle.getSQLState());
sqle.printStackTrace();
while ( (sqle = sqle.getNextException()) != null);
catch (Exception e) {
System.out.println(e.getMessage());
e.printStackTrace();

Java API for Webchannel 7.0

Hello,
for the ISA 4.0 we had the API of the java classes. Is there something like this for CRM 7.0.
Best regards,
Nils

Hi Nils,
Follow below steps.
Yes you can get it from service market place.
Follow below steps.
1) Log in to service market place.
2) Click on "Download" Tab
3) On Left side click on SAP Software Distribution Center -->Download > Support Packages and Patches> Entry By Application Group.
4) On Right side. Support Packages and Patches>SAP Application Components> SAP CRM> SAP CRM 2007> Entry by Component--> CRM Application Server Java
5) Click on "SAP SHARED JAVA COMPONENTS"
6) From Below screen click on "Download" tab and Download "SAPSHRJAVxx_x-xxxxxxxx.SCA" file.
7) Open "SAPSHRJAVxx_x-xxxxxxxx.SCA" file by "WINRAR" and unzip on your local laptop.
8) After unzip you will get several zip files under folder "BUILDARCHIVES"
9) Find "crmshrjavadoc" file inside folder "BUILDARCHIVES"
10) Unzip "crmshrjavadoc" file and you will get "javadoc.ppa" file
11) Rename "Javadoc.ppa" file to "Javadoc.zip"
12) Unzip "Javadoc.zip" file which we just rename in step 11.
13) you will get folder "Docs". This folder contain actual "javadoc.zip" file
14) Unzip above file and you will get Java API Documents for ISA 5.0 or ISA 6.0 or ISA 7.0 depends on "SAPSHRJAVxx_x-xxxxxxxx.SCA" version and SP level.
I just got ISA Java Doc by following above steps. It looks 14 step but once you download SCA file it will take only 2-3 minutes.
I am sure you will get Standard Java API for ISA just like ISA 4.0
Please let me know if you face any problem.
Also Visit this ECmmerce 6.0 Java API needed
Let me know if you face any error or problem.
Regards.
Ecommerce Developer.

BPM for error handling and acknowledgements

Hi,
Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
Please send me the link if you have other wise give me the solution on the same.
Thanks,
Nagesh

Hi !
Just check out these links This might help you.
Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
To know about Ack-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
The following link has entire configuration of Receiver XI Adapter (including acknowledgements)
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
 eror handling in BPM.

1. CCMS monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
2. BPM Monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks !!!
Regards
Abhishek Agrahari
Questions are welcome here!!
Also mark helpful answers by rewarding points

Java API for Adobe Flex(AIR and Browser)

Hello Community,
Sometime ago i started the project located at: : http://code.google.com/p/gwt4air/ , wich primary goal was to bring another approach on writing AIR application by providing a Java API for the AIR API. On top of that i added support for PDF and Excel generation using Java.
I m glad to announce that the project will now add support for the Flex Framework
I wrote a post about it on the main page.
The Idea behind it is to give Java Developers a more simple way to write Flex Application by leaveraing a swing like API.
I hope this project will be a good alternative to the MXML+ ActionScript approach and looking for people willing to join the project.
Regards,
Alain

Good question, I'd like to know this myself. 4.5 has a huge number of changes since 4.0.

Image not displayed in pdf generated using Java API for Forms service

Hi,
I am creating a pdf document using Java API for Forms Service.
I am able to generate the pdf but the images are not visible in the generated pdf.
The image relative path is coming in the xml as defined below. The images are stored dynamically in the Livecycle repository each time a request is fired with unique name before the xml is generated.
<imageURI xfa:contentType="image/png" href="../Images/logo.png"></imageURI>
Not sure if I need to specify specify specific URI values that are required to render a form with image.
The same thing is working when I generate pdf document using Java API for Output Service.
As, I need to generate interactive form, I have to use Forms service to generate pdfs.
Any help will be highly appreciated.
Thanks.

Below is the code snippet:
 //Create a FormsServiceClient object
 FormsServiceClient formsClient = new FormsServiceClient(myFactory);
 //Specify URI values that are required to render a form
 URLSpec uriValues = new URLSpec();
 // Template location contains the whole rpository path for the form
 uriValues.setContentRootURI(templateLocation);
 // The base URL where form resources such as images and scripts are located. Whole Image path is passed in BaseUrl in the http format.
 String baseLocation = repositoryPath.concat(serviceName).concat(imagesPath);
 uriValues.setBaseURL(baseLocation);
 // Set run-time options using a PDFFormRenderSpec instance
 PDFFormRenderSpec pdfFormRenderSpec = new PDFFormRenderSpec();
 pdfFormRenderSpec.setCacheEnabled(new Boolean(true));
 pdfFormRenderSpec.setAcrobatVersion(com.adobe.livecycle.formsservice.client.AcrobatVersio n.Acrobat_8);
 //Invoke the renderPDFForm method and write the
 //results to a client web browser
 String tempTemplateName =templateName;
 FormsResult formOut = formsClient.renderPDFForm(tempTemplateName,
 inXMDataTransformed,pdfFormRenderSpec,uriValues,null);
 //Create a Document object that stores form data
 Document outputDocument = formOut.getOutputContent();
 InputStream inputStream = outputDocument.getInputStream();

Option for error handling for DTP, ' no updata, no reporting" and "deactiva

Hello Gurus,
     option for error handling for DTP, ' no updata, no reporting" and "deactivated" , please give some explanation and instance for them?
Many Thanks,

On the Update tab page, specify how you want the system to respond to data records with errors:
                            a.      No update, no reporting (default)
If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
                            b.      Update valid records, no reporting (request red)
This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request by setting the overall status on the Status tab page in the monitor (QM action).
                            c.      Update valid records, reporting possible
Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
http://help.sap.com/saphelp_smehp1/helpdata/en/42/fbd598481e1a61e10000000a422035/content.htm
Hope it helps.
rgds, Ghuru

EWS JAVA API for availability is giving only 10 suggested times in a particular day

I'm using EWS JAVA API for seeing the availability of contacts who had shared their calender with me. Here in the suggested timings, I can able to see only 10 suggested timings even though there can be more than 10 suggested slots.
I would like to check is there any limit on suggested times ?
API is also giving quality of timing like "Good", "Excellent" on what basis this is decided ?

You can specify the maximum number of suggestions per day using the MaximumResultsByDay parameter (http://msdn.microsoft.com/en-us/library/office/aa565641(v=exchg.150).aspx).
The quality is determined based on how many attendees are available and is influenced by the GoodThreshold:
http://msdn.microsoft.com/en-us/library/office/aa563485(v=exchg.150).aspx.

How to use java api for function activity in embed oracle workflow?

because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........

The Java Function Activity Agent is not certified for Oracle Workflow embedded in Oracle Applications. Installing standalone workflow should be a lot easier than what you have found, although it looks like you did hit a Pentium 4 issue with the Oracle Universal Installer. I suggest you contact Oracle Support or Oracle Consulting for assistance.
because i can't install standalone oracle workflow successfully.
pls tell me how to use java api for function activity in embed oracle workflow?
are there some patch or pulg-in package?
ths a lot...........

Java API for images retriveal, Create and update in New Java API for SP05 ?

Hello Everyone,
Does any one know Which Java API Can be used to Display an Image in main table & API to add an image to Image table and link to Main Table in new release of Java API for MDM SP05.
Really Appreciate all help.
Thanks
Vinita

Hello Everyone,
Does any one know Which Java API Can be used to Display an Image in main table & API to add an image to Image table and link to Main Table in new release of Java API for MDM SP05.
Really Appreciate all help.
Thanks
Vinita

Newbie who want to use Java API for OLAP

Hi all,
I'm trying to learn how to use Java API for Oracle 10.2 OLAP. I went through the Java OLAP API user guide and I'm getting even more confused. Can somebody guide me to some good online materials?
Many thanks!
- Andrew

Hi there,
Did you see the examples in the Reference doc? :- http://download.oracle.com/docs/cd/B19306_01/olap.102/b14348/toc.htm
Thanks,
Stuart Bunby
OLAP Blog: http://oracleOLAP.blogspot.com
OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

Any Java API for dumping database?

As far as I know, the normal way to dump a database is to execute some command on the console.
Is there any Java API for dumping a database, so that the operation can be wrapped in the code?
The database system that I'm using is MySQL. Please help. Thanks!

By "dumping a database" I mean exporting data in the database into a text file, as a backup, that can be used when restoring the database. For example, in MySQL, I can run "mysqldump" on the command line to dump the database into a file.
So far I still have no idea how to do this using JDBC or any other Java API. Please help!

Question about Java API for XML schema?

Hello, everyone!
I am looking for a java api for XML schema. I hope the API is capable for parsing the structure of element
or complextype declarations in XML schema. So for example, if I specify a name of an element or
complextype defined in a schema, the name, dataype and other constraints of contained child elements can be returned.
Does anyone know if there exists such a paser?
Thanks very much!

An implementation of DOM Level 3.

Java API for Primavera p6 Web services

Hi All,
- Anyone can please suggest me how to create the Java API for primavera p6 web services ?.
-if is this inbuild then from where we can download please suggest me or give me some link ?.
Thanks & Regards
Dharmendra

You can review P6 Professional Project Management 7.0 Documentation Library for documentation on API and how to use it.
API are available and can be downloaded from edelivery.oracle.com.

Java API for Error Handling

Similar Messages

Maybe you are looking for