Java app. error: application access is set to not ...

i'd like 2 know the reason for this error message.

No, the Application Manager I referred to is on the phone. But that's an S60 application for S60 based phones.
The PC Suite Application Installer has no access to Java application settings on the phone.
There are probably similar settings on your phone, too, which is S40 based (instead of S60), but I don't know S40 phones very well, so I can't tell you exactly where it might be on the phone.
Note also that some network operators also place further restrictions for applications on the phones they want manufacturers to customize. So, it might also be the reason in your case.

Similar Messages

  • Java App error

    When I open Firefox I get a Java App error. "TypeError: Components.classes['@ica.com/XPCOM/ICAFFComponent;1'] is undefined". Have a very hard time running any site with Java.
    I really like Firefox and have it set up for use with all my daily work. I do not want to go back to IE but did upgrade see below.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?

    When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results?
    I can login fine via this address.
    http://[Server Address]:[Port Number]/ReaderExtensions
    And I can apply the extension successfully, but when I attempt to download I receive the error above.
    Application Alert" The file could not be saved. Are you sure you want to lose your results?

    Please check the supported version of flash player on your client machine for LiveCycle : http://bit.ly/1wGD9t4
    Upgrade or downgrade it accordingly.
    Thanks,
    Wasil

  • HT203421 Since installing Yosemite 10.10 the Apps Store application on my iMac does not work

    installing Yosemite 10.10 the Apps Store application on my iMac does not work properly. Applications show up in the App Store window to be updated but in fact most of them do not download and install. Some 3rd party software does download and install but most Apple and HP Applications do not. They appear in some cases in both the Ready to update or install list and in the "Installed in the last 30 days list". In some cases when I click on "Update" it shows in the "Installed in the Last 30 Days list" but it is not installed.  In the case of the latest Yosemite 10.10.3 beta down load, it momentarily show up like it is downloading but then disappears and does not install.

    I am now using Yosemite 10.10.2 and am trying to install the beta Download Yosemite 10.10.3 hoping it will resolve my problem but starts to download from the App Store snd then quits.

  • I can't access my Virgin Mail via OS Vista and Firefox 4. Keep getting a Google Apps error saying that the connection is not possible at this time. If I use IE I get no problem?

    I can't access my Virgin Mail with Firefox 4 and OS Vista and Win7. I keep getting a Google Apps error. IE is fine.

    Hi. Thanks for the rapid response. However I tried it and still no joy. This is the full message:
    Google Apps - Server error. We are unable to process your request at this time, please try again later.

  • Weblogic 11g JPS-04028 error - Application with name "abc" does not exist

    Hi,
    We are migration one our app from OC4J to weblogic 11g server. This app is running fine in OC4J but getting the below exception in 11g. Pls help us in resolving this in identifying and resolving the same.
    I found info here, but wasn't help full to understand.
    JPS-04028: Application with name "{0}" does not exist.
    Cause: Could not find application with name {0}.
    Action: Verify that an application with the provided name exists.
    Level: 1
    Type: ERROR
    Impact: Configuration
    link - http://docs.oracle.com/cd/E25178_01/core.1111/e10113/chapter_jps_messages.htm
    <May 24, 2012 11:17:11 AM GMT+00:00> <Notice> <StdErr> <BEA-000000> <May 24, 2012 11:17:11 AM oracle.security.jps.az.internal.runtime.service.PDPServiceImpl getApplicationPolicy
    FINE: Not found ApplicationPolicy:abc
    oracle.security.jps.service.policystore.PolicyObjectNotFoundException: Application with name "abc" does not exist.
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.unsync_getApplicationPolicy(XmlPolicyStore.java:640)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.getApplicationPolicyWithNoAuthzCheck(XmlPolicyStore.java:625)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicy(XmlPolicyDistributionService.java:222)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntity(XmlPolicyDistributionService.java:212)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntry(XmlPolicyDistributionService.java:121)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntry(XmlPolicyDistributionService.java:116)
    at oracle.security.jps.az.internal.management.pd.service.PolicyDistributionServiceImpl.getAppPolicyEntry(PolicyDistributionServiceImpl.java:137)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:355)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:320)
    at oracle.security.jps.internal.policystore.PolicyUtil.getGrantedAppRoles(PolicyUtil.java:2719)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$4.run(JpsAbsSubjectResolver.java:526)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$4.run(JpsAbsSubjectResolver.java:516)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getApplicationRoles(JpsAbsSubjectResolver.java:516)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.createJpsSubject(JpsAbsSubjectResolver.java:363)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getAuthenticatedSubject(JpsAbsSubjectResolver.java:356)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveJpsSubject(JpsAbsSubjectResolver.java:269)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveSubject(JpsAbsSubjectResolver.java:212)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPreRegister(JpsJmxInterceptor.java:447)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPreRegister(DefaultMBeanInterceptor.java:81)
    at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPreRegister(ContextClassLoaderMBeanInterceptor.java:1
    50)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPreRegister(DefaultMBeanInterceptor.java:81)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.BasePublicMBeanInterceptor.internalPreRegister(BasePublicMBeanInterceptor.java:110)
    at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalPreRegister(LoggingMBeanInterceptor.java:633)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.preRegister(OracleStandardEmitterMBean.java:611)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.preRegisterInvoke(DefaultMBeanServerInterceptor.java:1010)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:938)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:917)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
    at HTTPClient.config.JRFContextProvider.registerContextRemovalListener(JRFContextProvider.java:142)
    at HTTPClient.config.ConfigurationFactory.registerContextRemovalListener(ConfigurationFactory.java:569)
    at HTTPClient.config.ConfigurationFactory.getConfiguration(ConfigurationFactory.java:133)
    at HTTPClient.config.ConfigurationFactory.getConfiguration(ConfigurationFactory.java:103)
    at HTTPClient.HttpClientConfiguration.getConfiguration(HttpClientConfiguration.java:53)
    at HTTPClient.CookieModule.getMutableStatics(CookieModule.java:769)
    at HTTPClient.CookieModule.addCookie(CookieModule.java:515)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3717)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)>
    <May 24, 2012 11:17:11 AM GMT+00:00> <Notice> <StdErr> <BEA-000000> <May 24, 2012 11:17:11 AM oracle.security.jps.internal.jaas.JpsAbsSubjectResolver getApplicationRoles
    FINE: oracle.security.jps.ee.jmx.JpsJmxInterceptor:internalPreRegisterJpsException caught during app roles computation: oracle.security.jps.service.policyst
    ore.PolicyObjectNotFoundException: JPS-04028: Application with name "abc" does not exist.>
    -----------------

    Hi,
    This forum is for issues migrating from non-Oracle databases to Oracle.
    It would be better to ask this question in one of the Weblogic servers but as there are several Weblogic forums but it may be better to try this one first -
    Forum: WebLogic Server - Upgrade / Install / Environment / Migration
    WebLogic Server - Upgrade / Install / Environment / Migration
    Regards,
    Mike

  • 11g JPS-04028 error - Application with name "abc" does not exist

    Hi,
    We are migration one our app from 10g OC4J to weblogic 11g server. This app is running fine in 10g OC4J but getting the below exception in 11g. Pls help us in resolving this in identifying and resolving the same.
    I found info here, but wasn't help full to understand.
    JPS-04028: Application with name "{0}" does not exist.
    Cause: Could not find application with name {0}.
    Action: Verify that an application with the provided name exists.
    Level: 1
    Type: ERROR
    Impact: Configuration
    link - http://docs.oracle.com/cd/E25178_01/core.1111/e10113/chapter_jps_messages.htm
    <May 24, 2012 11:17:11 AM GMT+00:00> <Notice> <StdErr> <BEA-000000> <May 24, 2012 11:17:11 AM oracle.security.jps.az.internal.runtime.service.PDPServiceImpl getApplicationPolicy
    FINE: Not found ApplicationPolicy:abc
    oracle.security.jps.service.policystore.PolicyObjectNotFoundException: Application with name "abc" does not exist.
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.unsync_getApplicationPolicy(XmlPolicyStore.java:640)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.getApplicationPolicyWithNoAuthzCheck(XmlPolicyStore.java:625)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicy(XmlPolicyDistributionService.java:222)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntity(XmlPolicyDistributionService.java:212)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntry(XmlPolicyDistributionService.java:121)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntry(XmlPolicyDistributionService.java:116)
    at oracle.security.jps.az.internal.management.pd.service.PolicyDistributionServiceImpl.getAppPolicyEntry(PolicyDistributionServiceImpl.java:137)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:355)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:320)
    at oracle.security.jps.internal.policystore.PolicyUtil.getGrantedAppRoles(PolicyUtil.java:2719)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$4.run(JpsAbsSubjectResolver.java:526)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$4.run(JpsAbsSubjectResolver.java:516)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getApplicationRoles(JpsAbsSubjectResolver.java:516)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.createJpsSubject(JpsAbsSubjectResolver.java:363)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getAuthenticatedSubject(JpsAbsSubjectResolver.java:356)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveJpsSubject(JpsAbsSubjectResolver.java:269)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveSubject(JpsAbsSubjectResolver.java:212)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPreRegister(JpsJmxInterceptor.java:447)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPreRegister(DefaultMBeanInterceptor.java:81)
    at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPreRegister(ContextClassLoaderMBeanInterceptor.java:1
    50)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPreRegister(DefaultMBeanInterceptor.java:81)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.BasePublicMBeanInterceptor.internalPreRegister(BasePublicMBeanInterceptor.java:110)
    at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalPreRegister(LoggingMBeanInterceptor.java:633)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.preRegister(OracleStandardEmitterMBean.java:611)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.preRegisterInvoke(DefaultMBeanServerInterceptor.java:1010)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:938)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:917)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
    at HTTPClient.config.JRFContextProvider.registerContextRemovalListener(JRFContextProvider.java:142)
    at HTTPClient.config.ConfigurationFactory.registerContextRemovalListener(ConfigurationFactory.java:569)
    at HTTPClient.config.ConfigurationFactory.getConfiguration(ConfigurationFactory.java:133)
    at HTTPClient.config.ConfigurationFactory.getConfiguration(ConfigurationFactory.java:103)
    at HTTPClient.HttpClientConfiguration.getConfiguration(HttpClientConfiguration.java:53)
    at HTTPClient.CookieModule.getMutableStatics(CookieModule.java:769)
    at HTTPClient.CookieModule.addCookie(CookieModule.java:515)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3717)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)>
    <May 24, 2012 11:17:11 AM GMT+00:00> <Notice> <StdErr> <BEA-000000> <May 24, 2012 11:17:11 AM oracle.security.jps.internal.jaas.JpsAbsSubjectResolver getApplicationRoles
    FINE: oracle.security.jps.ee.jmx.JpsJmxInterceptor:internalPreRegisterJpsException caught during app roles computation: oracle.security.jps.service.policyst
    ore.PolicyObjectNotFoundException: JPS-04028: Application with name "abc" does not exist.>

    Hi,
    This forum is for issues migrating from non-Oracle databases to Oracle.
    It would be better to ask this question in one of the Weblogic servers but as there are several Weblogic forums but it may be better to try this one first -
    Forum: WebLogic Server - Upgrade / Install / Environment / Migration
    WebLogic Server - Upgrade / Install / Environment / Migration
    Regards,
    Mike

  • Error in accessing ResultSet - Descriptor index not valid SQL Exception

    Hi
    I am trying to execute a procedure in java and try to access the result set, but it is giving out Descriptor index not valid SQL Exception.
    While printing the first record the error is thrown the code is as follows. Any help would be appreciated. Thanks in Advance.
    1 . The Procedure
    CREATE PROCEDURE library.fetchssncursor()
    RESULT SETS 1
    LANGUAGE SQL
    BEGIN
    DECLARE c1 CURSOR WITH RETURN FOR
    SELECT * FROM VBPLTC.LTCP_DUMMY;
    open c1;
    END;2. Java Class
    public class TestFunction2
    public void getPassThruReport()
         Connection objConnection=null;
         ResultSet rs=null;
         CallableStatement callableStatement=null;
         try
              List returnList=new ArrayList();
              DriverManager.registerDriver(new com.ibm.as400.access.AS400JDBCDriver());
              objConnection = DriverManager.getConnection("URL","USERID","PWD");
              callableStatement  = objConnection.prepareCall("{call fetchssncursor() }");
               System.out.println("Got Connection "+ objConnection.toString()); 
                 callableStatement.execute();
                 rs = callableStatement.getResultSet();
                 // callableStatement.executeQuery (); i also tried this
                if(rs!=null)
                  while(rs.next())
                       System.out.println(rs.getString(1)+","+rs.getString(2)+","+rs.getInt(3)+","+rs.getInt(4));
         catch(SQLException e)
              System.out.println("SQLException "+e);
         catch(Exception e)
              System.out.println("Exception "+e);
         finally
              try
                   if(rs!=null)     
                   rs.close();
                   if(objConnection!=null)
                   objConnection.close();
               catch (SQLException e) {
    public static void main(String args[])
           TestFunction2 obj = new TestFunction2();
           obj.getPassThruReport();
    }3. Output
    Got Connection S101C3DE
    shar,Sharath,123456,1 <------------- records
    SQLException java.sql.SQLException: Descriptor index not valid.(1574
    ****************************************

    http://www-03.ibm.com/servers/eserver/iseries/toolbox/troubleshooting.htm

  • Open with Application... setting does not seem to be working

    Mac OS X 10.6.6, FF 4.0 (RC1), Microsoft Excel 2011 14.0.2. I needed to download several files with .xls suffix.
    Firefox asked what I wanted to do with the file, I indicated Open with Excel, and retain this setting. I then tried the next download, and the "Open With..." button showed no settings. I check the Preferences>Applications area, and Excel is there as the application of choice, but it does not appear as the "Open With" application in the download dialog box. If I just go ahead and download, the file does not open. If I *do* re-select Excel, then the file downloads and opens properly, but the setting is not retained for the next download, even though the "always do this" box is checked. It's a minor issue.

    Has nobody experienced this issue before?

  • Newbie - java app error

    hi...
    i'm new to java. i'm trying to install java (1.4.1) on a redhat linux (8.0) and trying to get the following test app to run... i'm getting an error when i try to run, so i don't know the actual cause of the error. i might have the java environmebt set incorrectly, or the test app may not be correctly written (it was on one of the java install sites that i was using as i was installing...)
    i have JAVA_HOME as a environment var
    i seem to have the "correct" dir structure for java on the system
    i can do java -version.. and get version of the java environment
    - can do javac .. and i get the list of attributes...
    i have the following test app in a separate dir
    import java.lang.reflect.Array;
    class Test
    public static void main( String argv[] )
    System.out.println( "Arguments:" );
    int i = 0;
    while( i < Array.getLength(argv) )
    System.out.println( argv );
    i++;
    i can compile it with no apparent issues...
    when i ->> java test q1 q2 q3
    i get the following error..
    Exception in thread "main" java.lang.NoClassDefFoundError: test
    i can't seem to find a good explanation using google as to what this means, or what's causing it..
    any help/assistance would be appreciated!
    thanks
    bruce
    [email protected]

    Hihi,
    this error...
    Exception in thread "main" java.lang.NoClassDefFoundError: test
    means they cannot find your class file... check if your java file and your class file is in the same folder...
    Regards,
    dimitri_can

  • Cant download apps, error message can't set up on new computer

    why I'm having problems downloading apps? I enter my credit card number error message says ' your account has been assessed from a nre computer of device and I must verify payment.

    Mail has a bug that causes ~/Library/Mail/Mailboxes to sometimes be a file instead of a folder, and that prevents Mail from creating any mailboxes there.
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what's it all about?
    After having fixed all filesystem issues, if any, proceed as follows:
    1. Quit Mail if it’s running.
    2. In the Finder, go to ~/Library/Mail/.
    3. Locate Mailboxes. If it’s a file instead of a folder, move it to the Trash.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

  • Running a Java App like a service in linux and not closing with window

    I know its not really a question i should ask you but thought you might have a quick answer for me, I have trying to running a small java application on one of the servers. I want it to run almost like a service, what i mean is i dont want the application to end when the terminal session is ended. So i thought i should put an entry into the /etc/rc.local file as follows (Final Line):
    cd /home/bluepoint/Teamselect_ServerApp_v1.0/bin/
    java Server
    #!/bin/sh
    # This script will be executed *after* all the other init scripts.
    # You can put your own initialization stuff in here if you don't
    # want to do the full Sys V style init stuff.
    touch /var/lock/subsys/local
    /home/bluepoint/kmyfirewall.sh
    su - bluepoint "/usr/local/tomcat/jakarta-tomcat-5.0.28/bin/startup.sh"
    cd /home/bluepoint/startme.sh
    As you will see it call a shell script which contains only the following lines (or see attached):cd /home/bluepoint/Teamselect_ServerApp_v1.0/bin/
    java Server
    but nothing happens when i restart the server. The DB, sendmail, tomcat etc start fine but not my app.
    The application works fine if i start it in a terminal window so i know it can run.
    Any ideas what im doing wrong??
    Kind Regards

    It's probably not happening because you missed the -c from the su command. However this isn't the correct approach to daemon processes on linux (which is what you're after).
    What you need to do is to place a script in the /etc/init.d directory. This script should take a single argument and start the daemon if the argument is "start", and stop it if "stop". Check out the scripts already in there to see how it's done.
    Then go to System Settings/Server settings/Services and enable the new service for the normal run level.

  • App malfunctions when accessed via URL but not when accessed in workspace

    I have an application that I have built at work. I have it on a test box. I have been using the app for several months with no problem. Because it is on the test box I am able to use the url to log into the app e.g. http://infotest.finone.bankone.net:7777/pls/htmldb/f?p=229
    Today I started having problems with the app not functioning properly for no apparent reason. A file browse upload process stopped uploading the files even though I got no error messages. Editable items stopped passing values to the next page when I click to edit something.
    The weird thing is when I log into my workspace on the test box and then launch the app from there everything works perfectly as before! I went in an deleted and purged all the sessions and then logged into the app via the url again and it worked for a minute then I had problems creep back up.
    This app is supposed to move to the production server soon. Any ideas why this weirdness is happening??!!

    Hi,
    As far as the file upload process...nothing happens and nothing appears in the Web Server Error Log at least not from what I see perhaps I am not looking in the right place. It's like as if the process just didn't actually activate or something although the page does in fact submit because the field values are cleared and the success message I coded in appears. So I know the page is submitted.
    The values being passed were actually part of the Wizard Form/Report on a Table. You click the Edit icon and it passes the value of the PK field to the subsequent field on the next page within the same session ID and fetches the appropriate row from the underlying table.
    So far not a single other person has had this happen to them. Today the app worked perfectly without any of these issues. Can there be local settings on my PC that are conflicting with the session state and other things on the Application? I log in and out of the app close to a 100 times a day, could this be clogging up session id's or something?
    Unfortunately its not consistently reproducible from the standpoint that today its not doing it all but when it was happening yesterday it certainly was consistent so at this point I don't know what to think.

  • Apps wanting to access my location when not in use (and not giving the option to turn it off)

    For most apps, I can choose to share my location 1) not at all; 2) when the app is in use (my favourite); 3) always (even when not in use).
    Why do some apps not offer the second option?
    For instance, I want to use an app that locates the nearest automatic external defibrillator (if someone has a cardiac arrest) but I can only use the app when I allow the app to access my location all the time. Given the fact that I will use this app perhaps only once every 15 years, I see no point in giving them my location for the next 15 years! That's just a waste of battery power and also a breach of my privacy.
    Second example: Apple's own weather app. I check the weather maybe once every month. I do not want the app to locate me all the time. But I can only choose between option 1) and 3) above.
    Is there a technical reason apps work like this? Or are they just sneakily trying to get as much information about me as possible?
    Thanks for your thoughts.
    PS: I am using iphone 6, iOS8.3

    everything rudegar said is right on.  Still, 10% overnight is more than you would expect - so something is still running.  try-
    double click the home button, and see what apps are listed as recent.  one or more of them might be still churning away.  it is a good idea to close those out fully every night.  Any of those apps with notifications or location services may be checking in every now and then and using your power.
    you mentioned airplane mode is 'off'.  this may be a terminolgy thing - but having airplane mode 'off', means that the radios are on.  WiFi, and 3 G if you have it.    turning airplane mode "on" turns off the radios.
    with everything off on mine - (except I leave the wifi on) -  i use 2 or 3% overnight. 
    But if you really want it off - do what rudegar says.

  • Web-based java app para chat works on safari but not firefox

    on safari it loads fine, and that cup of coffee loads before displaying the chat, but on firefox it just loads the chat with no coffee cup first and the it displays terribly and i can't type in the chat box because it loads so disheveled looking. any thoughts?

    ?

Maybe you are looking for