Java args warning in wls 9 startup script
Hi,
When I execute startup script in wls9.2, I'm seeing following warning messages in the server console.
What am i getting?Can I just remove these java args from the startscript? If so, will there any impact in the application performance. any help is highly appreciated. Thanks.
[JRockit] WARNING: '-XX:CompileThreshold=8000' is not a valid VM option. Ignori
ng.
[JRockit] WARNING: '-XX:PermSize=48m' is not a valid VM option. Ignoring.
[JRockit] WARNING: '-XX:MaxPermSize=128m' is not a valid VM option. Ignoring.
<Dec 19, 2006 4:26:13 PM MST> <Notice> <WebLogicServer> <BEA-000395> <Following
Hi,
This args do nothing to JRockit as they are Sun JVM specific. Removing or keeping them will make no difference if you use JRockit. You should not even mind in trying to remove these args, just ignore them.
Regards,
LG
Similar Messages
-
Managed server startup script not reading login info from boot.properties
To encrypt the username and password in weblogic admin server, I used a boot.properties file and setting some properties like StoreBootIdentity=true. This works as expected.
Now, I have a weblogic managed server within the same folder i.e.
under /bea/user_projects/domains/mydomain
To get the similar behaviour on this managed server, I created a boot1.properties file and set the following in the startup script
java -Djava.compiler=NONE -ms200m -mx200m $HOTSPOT_OPTIONS -classpath $CLASSPATH -Dweblogic.Domain=mydomain -Dweblogic.Name=$SERVER_NAME -Dweblogic.management.server=$ADMIN_URL -Djava.security.policy==$WL_HOME/server/lib/weblogic.policy -DRCP_PROPS=/data/css/adixit/samsung/scc612/server/cfg/RCP.props -Dlog4j.configuration=log4j.xml -Dweblogic.system.BootIdentityFile=/bea/user_projects/domains/mydomain/boot1.properties -Dweblogic.RootDirectory=/bea/user_projects/domains/mydomain weblogic.Server
When I run the script I get the following :-
<Jan 24, 2005 3:41:44 PM GMT+05:30> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:
Why is it not able to pick the username and password from the boot1.properties file ? Any clues ? What settings can I change to make it work ?
Thanks in advance.Being that you posted this problem a few months ago, I am assuming you found the cause of your problem. I too experienced this same symptom (boot.properties not being read) when trying to start a managed server on a different server than the admin JVM. I found the resolution in the following documentation:
http://e-docs.bea.com/wls/docs81/ConsoleHelp/startstop.html#BootIdentityFiles
Basically, you have to copy the SerializedSystemIni.dat from the server that the admin JVM is on to the secondary server where the managed JVM is going to run. I was able to do as the link says (add the boot.properties file with plain text passwords and have it encrypted). Hope this helps you or someone else down the road. -
Need to write a startup script for TunTap
Dear community,
I am using 10.10.1, 13" MBPr Late 2013 and I need to be able to access my Work VPN. From what i have been told, the OS X client can't work and that I have been advised to use Shrew Soft VPN. (We initially tried to get the WatchGuard Firewall to build a Mac .dmg and that didn't work). To get ShrewSoft to work, I have had to follow these steps:
http://ulaptech.blogspot.co.uk/2012/11/shrew-soft-vpn-client-for-mac-os-x.html
· Install the qt-mac-opensource-4.7.1.dmg file first
· Install the tuntap20111101.tar.gz file second
· Install the shrew soft client.
But the TunTap download that is above will not work as it is unsigned and Yosemite has now killed off unsigned kexts.I tried turning off the requirement for OS X for signed kexts by using this command:
sudo nvram boot-args="kext-dev-mode=1"
Then rebooting, but it didnt work.
I can get the VPN to work if I open up terminal and enter these two commands:
sudo kextload /library/extensions/tap.kext
sudo kextload /library/extensions/tun.kext
But I have to do this everytime i turn my Mac on.
Could somebody please help me write those two lines into a startup script? As I really have no idea how to do it.
Your help and guidance would be appreciatedChoose Utilities from the Finder’s Go menu, open the AppleScript Editor, and paste in the following:
set thepassword to text returned of (display dialog "Your administrator password is required." default answer "" with hidden answer)
do shell script "kextload /Library/Extensions/tap.kext" with administrator privileges password thepassword
do shell script "kextload /Library/Extensions/tun.kext" with administrator privileges password thepassword
Save it as an application and set it as a login item.
(120186) -
Missing STARTUP script for upgrade program
Hi Experts,
We are performing a upgrade from 4.7 to ERP6. From the documentation, it mentioned starting the upgrade program using the STARTUP script on the upgrade master. But I was unable to locate this STARTUP file on the upgrade master that is shipped to us.
We are using SAP ERP 6.0 upgrade master (D51033520). May I know where can I get this STARTUP program?
Thanks in advance,
Tzyy MingHi Lee,
You have to follow below command to run upgrade program:
1) Go to upgrade directory
2) Then run /<DVD mount directory>/PREPARE
3) Then you can run PREPARE from here.
Once PREPARE finishes. You can run upgrade assistant from upgrade directory:
Run java -cp <upgrade directory>/ua/ua.jar UaServer
When upgrade assistant server console shows you Ready
Then run java -cp <UaGuiDir>\uagui.jar UaGui to start upgrade GUI.
Thanks
Sunny -
EmbeddedLDAP : ClassCastException at wls startup
Hello,
I have a cluster with 4 managed instances.
During startup of the managed instances I have the following exception :
<Nov 12, 2003 6:17:11 PM CET> <Error> <EmbeddedLDAP> <000000> <Error Instantiating
'dc=testwebapp': null>
<Nov 12, 2003 6:17:11 PM CET> <Critical> <EmbeddedLDAP> <000000> <java.lang.reflect.InvocationTargetExcepti
on: java.lang.OutOfMemoryError
<<no stack trace available>>
>
<Nov 12, 2003 6:17:12 PM CET> <Critical> <WebLogicServer> <000364> <Server failed
during initialization. Ex
ception:java.lang.ClassCastException: com.octetstring.vde.backend.BackendRoot
java.lang.ClassCastException: com.octetstring.vde.backend.BackendRoot
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:246)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:717)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
I have wls 7.0 sp2.
I cannot use wl anymore.
Is there a quick workaround to this situation ?
What can I do ?
TIA
Best Regards
Sergi"Sergi Vaz" <[email protected]> wrote in message
news:3fb3a10a$[email protected]..
>
Hello,
I have a cluster with 4 managed instances.
During startup of the managed instances I have the following exception :
<Nov 12, 2003 6:17:11 PM CET> <Error> <EmbeddedLDAP> <000000> <ErrorInstantiating
'dc=testwebapp': null>
<Nov 12, 2003 6:17:11 PM CET> <Critical> <EmbeddedLDAP> <000000><java.lang.reflect.InvocationTargetExcepti
on: java.lang.OutOfMemoryError
<<no stack trace available>>
>
<Nov 12, 2003 6:17:12 PM CET> <Critical> <WebLogicServer> <000364> <Serverfailed
during initialization. Ex
ception:java.lang.ClassCastException:com.octetstring.vde.backend.BackendRoot
java.lang.ClassCastException: com.octetstring.vde.backend.BackendRoot
at weblogic.ldap.EmbeddedLDAP.initialize(EmbeddedLDAP.java:246)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:717)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
I have wls 7.0 sp2.
I cannot use wl anymore.
Is there a quick workaround to this situation ?
What can I do ?
Is this is a managed server, then you can delete the files from the ldapfile
directory. Upon reboot, the managed servers will copy down a replica from
the admin server. Only do this on a managed server.
On an admin server, go to the backup directory and restore from the latest
backup zip file. -
The last couple of days I have been getting script errors on startup - Script: chrome://global/content/bindings/browser.xml:194 ,
I am also getting shutdown errors when I power down "end program" types including sgtray.exe, hkcmd.exe, directcd.exe, msascui.exe, d3d9window.exe,
Some of these are associated with programs I use but have not caused problems previously.This post can help you with your problem : https://support.mozilla.org/en-US/kb/warning-unresponsive-script
Hope it helps :) -
How do I sound an alarm if a thread fails to start from the weblogic startup script?
Here's the problem. I have a critical java program for my web app that
is its own thread and is started by the weblogic startup script when
the weblogic server is started. The constructor of this thread will
throw exceptions and send out emergency emails to the Sys Ops people
if it cant instantiate itself correctly. The only time that it wont be
able to do that is if it cant read the email property from a config
file to know where to send sys ops email to. In that situation what
would be the best way to alert someone that the thread failed to
start?[email protected] (Mike Lomage) wrote in message news:<[email protected]>...
... The only time that it wont be
able to do that is if it cant read the email property from a config
file to know where to send sys ops email to. In that situation what
would be the best way to alert someone that the thread failed to
start?My 2 cents worth:-
1) Post a console message to the admin (thro' net send in NT).
2) Hard code a default email address (easiest).
drit
Freelance Java Developer / Code Inspector
http://www.geocities.com/doc_i_t/CodeInspectionService.html -
GPO with a startup script is not working.
I have a GPO that I have added a ".bat" script to the "Computer Configuration\Windows Settings\scripts\startup/shutdown" section. The batch file is located in the netlogon folder. This script was part of another Old GPO
that I want to consolidate into this new GPO. So I am taking the exact settings from the old GPO and applying it to the new GPO.
The script does not run at startup and when I go into Group Policy Management, highlight the GPO then on the right pane click the settings tab it doesn't display the startup script as being set. It's just not there. If I select edit and go to the
"Computer Configuration\Windows Settings\scripts\startup/shutdown\startup" section the .bat script is present though.
Also if I do a gpresult it also shows that it isn't running the script but all other settings in the GPO are being applied.
This GPO has the User Config. side disabled
Why isn't the GPO applying the script or even acknowledging that it is present in the settings tab?Hi,
I could not see any report in the above link. I would like to know that did you follow the below path:
http://technet.microsoft.com/en-us/magazine/dd630947.aspx
In addition, logon script could only be applied to users. If want to apply to computers, we should use startup script.
Regards,
Yan Li
If you have any feedback on our support, please click
here
Cataleya Li
TechNet Community Support -
Dont work startup script after update windows7 of wsus
hi
i have a domain controller 2008
my clients is windows7 ultimate
i have a file .exe and i create a policy and this file .exe in start up script
this policy is correct
but when update clients. this policy not work .and in task manager, this file .exe with username system show
what happend
please help mehi
i test a way,
i install a windows 7
then in gpedit.msc, in startup script, add this file, when restart windows , this policy ok
now ,i update this windows7, and about get 160 update of microsoft, now when restart windows, this policy not work and in task manager, this file .exe with username system show
this error not happend to my domain
please help me -
Hi,
I have 2 weblogic startup scripts (startWebLogic.sh and
startWebLogic_recovery.sh) for the same domain.
startWebLogic.sh uses config.xml file.
I would like to use config_recovery.xml as the configuration file for startWebLogic_recovery.sh
How would I do this ?
I am using WebLogic Server 6.1 on SunOS 5.8 / HP-UX 11.0.
Appreciate any help.
Regards
Gunaseelan VenkateswaranI guess you're using Weblogic 6.1 with WLCS 3.5. I think you're supposed to work with one config.xml for the same domain, and not have a different config.xml.
To start up different applications or EJBs, use the "target" property to control which applications to start up for the particular instance.
YY -
Check for libraries with a startup script
Is it possible to check for open libraries with a startup script? Currently, i'm trying like this:
try{
app.libraries.item("Marks.indl").name
catch(e){
app.open(File("/Support/InDesign/Lib/Marks.indl"))
If InDesign is already open, this code works correctly (that is, if the library is open, nothing happens, otherwise it opens the library). However, if I place this in the startup script folder, it will open a second (third, fourth, etc.) copy of the library, even if the library is already open.
I think this happens because the library files are opened later in the startup sequence then the startup scripts are run. Is there any way to work around this?
Thanks,
/danIs your script supposed to work in ID CS3, or later?
Anyway, InDesign CS4 seems to reopen the libraries before launching startup scripts, so the following code works for me:
// Startup Script
const libName = "Marks.indl",
libPath = "/Support/InDesign/Lib/";
var libFile = libPath + libName;
if( !app.libraries.itemByName(libName).isValid )
try {app.open(File(libFile))}
catch(_){alert("Unable to open the library:\r"+libFile);}
@+
Marc -
Office 2010 setup thru computer startup script
I am trying to install Office 2010 (sp2 seperate in the updates folder) thru group policy startup script and configured with OCT .msp file. Also try to start Access Runtime 2010 with SP2 update in the updates folder.
In group policy set run scripts asynchronisely disabled and run scripts visible enabled otherwise i could not see what the system was doiing also not when configiguring OCT with full display. The gpo settings lets the screens show during install so the user
can see what happens.
There is another problem that rises however: I have made 2 batchfiles and both are starting as a computer startup script in seperate gpo's (that is in another post). First the Accessruntime is installing, after that Office 2010 is running. Both are installed
after login but only one of the 2 have SP2 installed (7015) in this case Accessruntime has it. When i run only the Office 2010 install and not the Accesruntime 2010 then Office 2010 standard has also SP2 installed (version 7015). When running both only Runtime
has this sp2 and Office has 4763 this is without sp2 i believe.
In both folders (Office en Runtime) are the update files .msp in the updates folder of the installation, so thats ok.
Why is only 1 of the 2 installing the SP2 when running both?
A second thing is when restarting the system and before the login screen appears a message: Upgradepatch cannot be installed by Windows installer becasue the upgraded program does not excist of the upgradepatch is not suitable for this program?
Here is part of the batchfile:
IF EXIST "c:\program files\Microsoft Office\Office14\WINWORD.EXE" (goto mkfile) ELSE (goto DeployOffice)
:mkfile
ECHO Office 2010 is reeds geinstalleerd>c:\temp\office.txt
goto end
:DeployOffice
call cscript \\sharename\office2010\Offscrub03.vbs ALL /bypass 1 /q /s /NoCancel
start /wait %DeployServer%\setup.exe /adminfile %DeployServer%\officeconfig.msp
echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
Another batchfile
start \\sharename\accessruntime2010\setup.exe /config \\share\accessruntime2010\config.xml
REM echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
freddie
after installing both runtime and office both have SP2 in updates folder:
runtime 4763
Office 2010: 7015
So in this example runtme is installed without the SP2. installing runtime alone gives with SP2...
The message is gone. There was a other policy inherited from above that caused the message. The only problem now is that when installing both, runtime 2010 with SP2 files and Office 2010 with SP2 files, then one of the two don't get the Sp2 installed, why
is that?> In the bat file, I have a line that records if the install completes
> successfully or failed. I don't have any other logging in my
> script. Are you referring to something like GPO logging? I know that
> the script runs because when I am looking at one of the PCs, I can
So it is NOT GP related but rather your script fails?!? Put some "echo
%~n0 %date% %time%>>Log-File-Of-Your-Choice.txt" in it to check what's
going on. And put ">>Log-File-Of-Your-Choice.txt 2>&1" at the end of
critical commands to capture their output.
> I ran the gpresult /h command which shows all User Configuration
> policies, but NOTHING appears under the Computer Configuration section.
Admin commandline? If not, you don't see computer settings :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))
Martin,
I still did not figure out why the installation script did not work for some of the PCs, even though the PCs have the same image. For the ones that don't work, I will install manually. Can you please look at the screenshots of the GPO
settings I am using, and let me know if there is any settings that I need to remove or add?
Thanks -
Missing startup script in bridge cc
I have photoshop cc and bridge cc loaded on my computer. I also had CS6 on the same computer. I deleted photoshop CS6 from my computer. When I try to open a file in bridge cc I get an errer message that cs6 cannot be found. I checked my bridge cc startup scripts folder file and it is empty. Has anyone had the same problem?
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-
Photoshop CS6 Startup Script Missing from Bridge CC
Hi. After downloading a Photoshop CS6 update, Camera Raw unlinked from Bridge CS6. I have a full CC subscription so I downloaded Bridge CC and that solved the problem. Now Photoshop does not appear in the 'tools' menu. It is missing from the Startup Script list in preferences as well. Where can I find or download the photoshop script?
On a mac, using Mavericks.
Thank you!Bump. Any solutions yet?
restart Bridge holding down option (Mac) or ctrl (Win) key ad from the menu choose reset references. Try again. BTW, the start up scripts from the needed applications for Bridge Tool menu are in Bridge preferences / Start up scripts, they should show and have a checkmark in front of them. -
Bridge CS5.1 Tools are missing and there are no startup scripts available.
Brand new MBP with Creative Suite CS5. Not sure what happened to the Bridge Image Processing Tools that where readily available in CS4. I looked for the Startup Scripts mentioned in other forum posts but this folder is empty: Library > Application Support > Adobe > Bridge CS5.1.
Why make us hunt for Startup Scripts?I think you may be misunderstanding me.
With many advantages with using mail for this forum the disadvantage sometimes is you don't have oversight in the whole thread.
I was merely reacting on Curt with the CS5 and CS5.5 solution that solved some problems earlier this year but reading the thread again that seems not related to yours.
Shortly before Curt his post I read your post about renaming the default folder name (which to me sounds bad). Hence my reference to a solution of an older problem that was solved by creating a new folder with the 5.1 addition and copy the scripts in there
However I still don't understand why you are not able to have a normal setup after clean install.
Without having experience with Lion I really would try the Recovery Disk for resetting your user account. With Pre Lion you could do an Archive and Install and it seems Lion also has such an option.
Maybe you are looking for
-
Can't access game center and haven't recieve any email reset
Hello, its been a long time I haven't check my game center ID, I can't sign in to my game center. So I check my email and got this: Hello, The following information for your Apple ID [email protected] was updated on 30/07/2013: Apple ID Email address
-
Error in Adobe form based in a xml interface when changing data element
The adobe form is called from a web dynpro. The adobe form contain a page and subforms (positioned y flowered). The form worked out perfectally. Then edited a descriptive text in a data element, from se11. The form continues worked out correctelly.
-
How to create discoverer 4i user account?
Hi All, Could anybody please tell me how to create a discoverer 4i user account so that user can log in and use the discoverer viewer? Thanks a lot!
-
Rendering nodes not showing up in Qadministrator
Hello, i am new to the Apple Discussion Forums. I have a question regarding my Qmaster setup. I have a Mac Pro model 1,1 connected to two Mac Mini's (Core 2 Solo, Snow Leopard and Leopard respectively). I have installed Qmaster on all machines, and i
-
Tried to install 10.7.4 via software update dropdown on my MacMini over ethernet on my home computer network, failed. Downloaded Combo Client 10.7.4 update from apple.com. Downloaded fine. Failed to mount with invalid checksum error. Tried to down