Java card simulator and WTK communication problem.

Hi ,
I am a newbie to java card .I am doing project on java card based sim.
For that I am using JavaCard SDK 2.2.2 and WTK 2.5.2 .
Now when i am trying to connect to cref(java card simulator) from java card midlet,I am getting protocol mismatch error.This is because of WTK runs on slot T=0 and cref runs on T=1.
then i tried with jcdk3.0.1 classic edition.It provides cref configured to run on both slots T=0 and T=1.
But when I tried to deploy jcrmi applet on cref running on T=0 i am getting the same error "Protocol mismatch error".
Can anybody please tell, if there is any way to configure cref to run with T=0?
Please reply ASAP, as i am stucked with the problem from more than a month.
Thanks in advance,
Saviy

Thanks Anki for replying.
I am trying to run RMISample from development kit.With steps given in guide as follows
1.cref -o demoee
2.Navigate to the
JC_CLASSIC_HOME\samples\classic_applets\RMIPurse\applet
directory.
3.ant all
it works fine but when i do it with following steps:
1.cref -o -t0 demoee
2.Navigate to the
JC_CLASSIC_HOME\samples\classic_applets\RMIPurse\applet
directory.
3.ant all
i am getting protocol mismatch error.

Similar Messages

How does the Java Card simulator work? (Using NetBeans)

Hi,
I'm using NetBeans and am trying to simulate:
Someone powering up the card, saving a value, and powering down... And then they power it up again, get the value, and power down.
When I edit my APDU script to do the second part, the value I entered the first time is never stored, which probably means that when I 'run' my code, my application is loaded and everything is initialized again.
How do I edit NetBeans to not install the application every time I hit 'run'? And not to initialize the values, so that when i power it up again, I can get a value stored in a previous running of a script?
When I use powerup, powerdown and then powerup again, NetBeans doesn't powerup the simulator the second time. So understanding the Java Card Simulator would also help... where it is, how it runs, what options it runs with, etc.

Hi Shane,
I have not read anywhere else that the JC3 cards are not available, thank you so much for that tip! I am not doing it for research, but I am working on this alone and will have to deploy a card later on. I will be getting all the right versions now.
I'll ask the question then, using just the JCDK:
If I want to save a value on the card, and then need it at a later time, how do I go about it. Do I do the following?
(1) Install the application on the card. (I know how to do this)
(2) Run the simulator using -o "eeprom data filename"
(3) Save the value using the APDU calls and Java code on the card + close connection.
Code:
public class MyApp extends Applet {
    private static byte[] data = {0x00, 0x00, 0x00};
    // Install method, method to register, process method that can call saveData or recallData, etc
    public static void saveData()
       // code to change data
       data = {0x01, 0x01, 0x01};
    public static byte[] recallData()
       // code to return data
       return data;
}(4) Run the simulator using -i "eeprom data filename". get the value using recallData().
Will selecting the app not make data initialize to {0x00, 0x00, 0x00} again?
If I know this is the correct way of going about it, then I can work towards it getting done.
From other examples I can see that this is probably the way it should work, but my data array always returns as {0x00, 0x00, 0x00}.

GPIB and RS232 communication problems

I've been having several "interesting" problems with GPIB and RS232 communications in LabVIEW VIs. Some I'll mention at the end for curiosity, but right now I'm facing a rather big problem. I'm essentially self-taught at doing LabVIEW (using 8.5.1 right now), but by now I've had a lot of experience as their either has not been any drivers or pre-made VIs for the instruments I've needed or I've not been able to get the available drivers to work and had to write my own anyway (such as with the HP 3458A), but nothing seems to be working right now. I'm not at work, but we typically find forum sites blocked anyway (I can't even download the NI drivers at work since they house them on a ftp server, go figures) so I can't give the VI itself (it wouldn't be easy to get approval even if I could) so the best I can do right now is in words describe everything I've tried. I will be happy to post follow-ups of specific details if I can if they would be helpful.
I've been working on a routine to read data from an MKS 670 Signal Conditioner/Display with a MKS 274 Multiplexer with 3 connected MKS 690A Baratrons. Previously I've worked on programs using other older displays and the analog outputs which were being read by a DAQ card, but for a new project it was decided to try and just read the data directly. I first worked with a unit with just an RS232 Serial Port which I managed to get to work, but had so much problems with garbage readings and having to add checks and re-reads that by the end no matter what delays I added between each reading and how simplified the command routine down to just 2 sequences and the read that it took at least 10 seconds to get 1 reading from each channel.
Figuring maybe it was a limitation of the serial communications for these instruments I tried to re-work it for a unit with a GPIB port with which I'm actually much more familiar. The problem is that I cannot get anything at all from the unit through GPIB. Everything even the bare-bones built-in GPIB CLR function times out with no response from the instrument no matter how long I set the timeout limit and it also freezes the entire GPIB bus as well. It isn't a waiting issue as it freezes on the very first command. The GPIB initialization function seems to work (I typically find this to be unnecessary), but the instrument itself doesn't even respond with a status code. I've also tried just the basic GPIB write functions with even just passing the <cr> and <lf> characters as well. In Measurement and Automation Explorer most of the time the instrument won't even appear when doing search for instruments and when it does it shows as not responding to the *IDN? command (yes I've messed with the EOI, EOS, etc settings and I've even changed the GPIB address even though when it gets this far it confirms that I have the correct address) and even tried manually doing the *IDN?, *RST, and *CLR commands even with <cr> and <lf> characters which the manual for these units clearly states are compatible commands and NI SPY and everything show no response at all. I've tried 2 different GPIB units, 3 different computers including several that are not online and haven't been updated for a while, and using older LabVIEW versions, extensive re-booting and resetting of computers and devices and still nothing. I'm using an NI GPIB-USB-HS GPIB to USB adaptor which I've used extensively on other systems and even re-connected to those systems and everything worked fine. When I hooked up equipment that I knew was working, it would either freeze the entire GPIB bus until well past whatever timeout setting I set at which point all the instruments would appear, but none responding to *IDN? queries or nothing would appear at all, or if I manually turned it off when frozen the other instruments would work and most even respond to the *IDN? queries. The same goes for both of the GPIB instruments of this type that I tried and again for different versions of LabVIEW, difference computers (all Windows XP though), and every GPIB configuration setting I can find to mess with in every combination.
Any thoughts or suggestions would be greatly appreciated. I've had all sorts of weird problems with equipment and LabVIEW (you've got to love undocumented design features) that have frustrated me before, but I've never had an instrument never respond at all especially a GPIB one. Getting garbage yes, no response at all, no.
The side side issues I'm just mentioning as they may be related, but I'm really interested in the above as I have working solutions for these:
One I've had is with a Hart Scientific (prior to being bought by Fluke) 1560 Black Stack that would continually stop responding to GPIB commands when on a continual read function taking readings just every 4 seconds with 250ms between each GPIB read or write command but for up to hours in total and the times it stops responding are random as far as I can tell. I even started sending the *RST command before and after every read or write command and still it freezes. The only thing is to manually turn it off and then back on or manually go through the menus and manually trigger the GPIB reset routine at which point it immediately starts responding. However, when I got sick of having to babysit it and just decided to try the RS232 serial port (as that is all it has without the extended communications module) it works fine no problem and I can even get readings slightly faster from it. Using a Hart Scientific 1529 Chub-e it could give me data on all 4 channels every second without problems. I just find it a bit odd.
When I couldn't get any of the HP 3458A driver packs to work to even give a single measurement reading and just made my own using basic GPIB read/write commands using the programming manual I still have a few interesting problems in randomly when reading off the full possible 256 bytes on the bus and clearing the bus I often find garbage partial readings on the bus every now and then. I've added a few routines to do some basic checks, but it is annoying. What is really weird is when just doing basic DC Voltage reads the "-" sign will randomly be dropped from some readings (started as about 1 out of every 5, down now to about 1 out of every 10). Fortunately I'm taking several readings and averaging and taking the standard deviation with limits on the deviations and basically added a routine to say if there is even 1 negative number take the absolute value of all then make all negative, but again I find it weird.
Thanks.
-Leif
Leif King
Metrology Engineer
Oak Ridge Metrology Center

Greetings Leif,
I understand you have completed extensive troubleshooting techniques to pin-point the problem with the GPIB communication. To begin, I want to ask you a few questions to help me understand your set-up and the issue at hand.
1) Is the NI GPIB-USB-HS cable the one which cannot communicate with your instrument?
2) When using the GPIB-USB-HS, does the GPIB interface show up in MAX?
3) If yes, does the instrument appear in MAX after scanning for instruments (from what I understand in your issue, it does so in an intermittent manner..)?
4) What driver version of VISA do you have installed in your computer?
5) Are you able to communicate to the same instrument using another GPIB cable?
Thank you for trying out some of these steps again, but we want to make sure we rule out other aspects in the systems which might be affecting the GPIB communication.
As for your other issues, please post seperate threads for each so we can help you accordingly. Thanks!
Sincerely,
Aldo
Aldo A
Applications Engineer
National Instruments

Java card simulation

i have to simulate the java card applet which is doing all crypto functions and
then i will communicate to it by WTK SATSA using eeprom image of the java card applet..
i don't have to install it on card, i hv to simulate everything..
is there a way to do it... or we need a licensed tool for it..
does WTK 2.5 cref and java card 2.2.2 cref will be able to communicate..
please help, i need this info. urgently

Are you referring to a Floppy diskette drive ?

My USB CF Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore. It was last week and worked fine to get pictures from my camera. Now it won't mount. I have tried another card reader and the same problem exists. Also tried different cards..

Hi
My USB CF (Compact Flash) Card reader is not mounting on my 2.5 GHZ Intel Core i5 iMac anymore.
Last week it worked fine to get pictures from my camera but now it won't mount at all.
I ejected it in the correct way rather than just disconnecting it but now i cannot get it to remount!
I cannot even see it in the disk utility or system profiler.
I have tried another card reader (a brand new one bought today) and the same problem exists. I've also tried different cards to see if that made a difference and they still arent being picked up on the Mac.
I have done all the usual things like rebooting, unplugging all other USB devices and then trying but nothing has worked.
I'm a photographer and I'm at my wits end here. I know the cards are fine as i have been using them without issue and they are also new.
Note: If I plug the camera in directly to the Mac, the Mac picks it up just fine as it always has done. Its just the card readers that it wont pick up anymore.
If anyone has any ideas at all other than the following (my so called friends advice) you'd earn my undting love:
Buy a PC
Use the camera (Thats why i bought the reader in the first place - importing RAW files from the camera is SLOW!)
Replace your CF cards (I have three 8GB cards two of which i had never used til today and they dont work either!)
Buy a new card reader (this is the 5th one in two days - none work on the Mac)
Many thanks in advance!
LIsa

OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

Java Card Simulator

Hi ,all
Pls help me out.
I am new to the Java Card Technology.
I want to use javacrad as a part of my project.
So Pls any one tell me whether there is any simulator available for the Smart Card & terminal.
also tell me how to start using it .
if yes pls send me the link..
Pls pls pls help me.
regards
Mihir

Hi Mihir,
you could use the JCOP-Tools which are a plugin for Eclipse simulating an IBM JCOP smart card. These tools can be downloaded from:
http://download.boulder.ibm.com/ibmdl/pub/software/dw/jcop/tools.zip
You can find further information at:
http://www-306.ibm.com/software/wireless/wecos/tools.html
I hope that helps.
Thorsten

Java Card simulator & Windows 2000

Hi all,
I chose to use the sun's card simulator (java card Development Kit Version 2.2_01) under windows 2K but from the readme, only WinNT 4.0 platforms are supported. Is there anybody that tried it under Win2K successfully?
thanks in advance,
KAnis

works fine on w2k

Java Card Product and Price List

Where to find the Java Card, Card Reader to read Java Card and its Price List issued by Sun Microsystems.I want these products and price list.
What is the tool needed to install the .CAP file in to Java Card?. I have read from the Sun Material, that there will be a off-card installer that loads the binary file of .CAP to Java Card through the CAD device. Where to find the off- card installer?
I had tested a sample application in Eclipse IDE with JCDK 2.2.2 and EclipseJCDE.
Please anyone provide me the details
Edited by: sachindev on Oct 24, 2007 6:22 PM

Hi there,
I found this site with everything that you might need, I would say that prices are reasonable (correct me if I am wrong):
Cards: http://www.smartcardsource.com/cards.htm
Readers: http://www.smartcardsource.com/readers1.htm
SDK: http://www.smartcardsource.com/sdk.htm
Hope it helps...

Java card application and applet

Hi
I' am developing a java card application which has three applets (1-ID, 2-Purse, 3-Library). I mean the same card should be use for personal ID, purse, and as library card. Using eclipse I first have to create a new project.
File-New-New project-java card project. Then in the package Explorer view right click src then New-other-java card Applet. My question is because my java card application has more than one applet how do I add the other two. Should I add the other two by clicking src again or just add them under the same source code belonging to the java card Applet created at the beginning.

you mean by again doing right click src then New-other-java card Applet.

Java card api and long

Java card runtime does not have support for primitive long..... but if you absolutly had to have a long, how could one do it.
I am thinking it would be some sort of byte[] representation. But I havent found any information. Can someone point me to the right direction

The int keyword and its 32-bit integer data type are optionally supported.
what is wrong with using a byte array ?
you can convert long to byte array and vice versa with your
own code.

Java Card simulator with MD5 MessageDigest support?

Are there any Java Card simulators with support for the MD5 MessageDigest available? I checked both cref and jcwde, but they only support ALG_SHA.

Thanks.
By the way, do you happen to know if the newer JCOP cards (e.g. the NXP (Philips) JCOP 41 V2.2.1/72K USB
NXP (Philips) JCOP 41 V2.2.1/72K) still support the MD5 MessageDigest? Older JCOP cards seem to support MD5, but at least in the publicly available JCOP 41 specs there is no mention of MD5 anymore; e.g. at http://www.bsi.bund.de/zertifiz/zert/reporte/0426b.pdf

Java card Applet and sim toolkit applet

What is Difference between this two?
When i load java card applet on sim ,then applet is not visible on GSM phone. But sim toolkit Applet is visible on GSM phone.
i think,SIM uses sim.toolkit ad sim.access to interact with Applet.
is it so?
Plz solve my query.
Thankx 4 ur valuable time.
Regards
Divyesh.

for programming in sim card, you must use necessarily sim toolkit applet.
I thing that the difference between Javacard applet and Simtoolkit applet is that:
- sim toolkit applet is only for sim card
- java card applet is for another smart card
of course, both have some joint things.

Help needed with Java 1.4 and xml Runtime problem

I am working on a java 1.3 and JAXP1.1 written code. Now I want to compile and run it using J2SE 1.4. Here are the import statements from the existing code.
import org.xml.sax.*;
import org.xml.sax.helpers.DefaultHandler;
import org.xml.sax.Locator;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.Attributes;
import org.xml.sax.XMLReader;
import org.xml.sax.InputSource;
import java.sql.*;
import java.net.*;
import java.io.*;
When I run the existing(using java 1.3 and Jaxp1.1) code I have to include the files crimson.jar and jaxp.jar in the windows 2000 CLASSPATH and works fine.
But when I compile and run it using J2SE 1.4 which has the built in support for the saxp, I thought that I don't have to specify any CLASSPATH for the new 1.4 so I don't specify any Classpath and it gives me the Microsoft "ClassFactory cannot find the requested class" error which means that even thought the new java 1.4 has the xml classes as libraries yet it still requies some .jar files to be listed in the CLASSPATH.
If I am right then what path will work(i.e what jar class I need to add to the CLASSPATH).
Thanks for your help.
RA.

Thanks for your reply,
I think I didn't specify when the error occurs. The ClassFactory related error occurs when I run the program, it compiles without any error.
From what I understood somewhere in the java 1.4 docs, that the new 1.4 has the xml libraries built in by default so one doesn't need to give the classpaths just like we don't give any CLASSPATH for using swing and many of the other java packages. That is one thing.
Second thing is that I also tried to use the java_xml_pack-spring02 and java_xml_pack-summer02; but non of them include the crimson.jar and the jaxp.jar files in them which are the 2 .jar files that makes the program run fine when used under the java 1.3 with combination of the jaxp1.1(which was downloaded seperately and then the CLASSPATH for it was set.).
Can you please help what .jar files do I need to use instead. I tried to use the ones that the new java_xml_pack-spring02 and java_xml_pack-summer02 has for the jaxp in them.
Thanks again.
RA

IDES for writing Java card applets and converting the applets as CAP FILE.

I have developed a JAVA CARD APPLET , FindMFValueJCA.java . It gets compiles in net beans 6.0 But while converting the applet to CAP file i am getting some errors. Is there any other IDES which take care of converting the CAP files

What's the Java version you are using?
As the java card tool kit has version dependencies. If you are using java_card _kit 2.2.2 then 1.5 is fine.

How does the Java card simulator work? and other misc questions

First, I have a class inherited from Applet. Okay, I did that.
How do I convert this class to a CAP file? I mean I have a class file which is compiled by javac, do I use this file to convert into a CAP file? What is an AID? Do I make up this AID?
In this .scr file (APDU Script), I understand the first 4 bytes, it means to create an Applet, but what about the rest? I know there are some intermixes of lengths and AIDs, I just can't decipher this.
// create wallet applet
0x80 0xB8 0x00 0x00 0x14 0x0a 0xa0 0x0 0x0 0x0 0x62 0x3 0x1 0xc 0x6 0x1 0x08 0 0 0x05 0x01 0x02 0x03 0x04 0x05 0x7F;
And here comes the main question?
How does the simulator work? How do I generate the data that mimics what the card reader reads?
Thanks
Jack

At first blush,
I have these when executing the RMIPurse sample according to the user guide
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported type long of field interfaceHash.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type long of method dispatch.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.SkeletonMismatchException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Skel: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field interfaceHash.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported type long of field serialVersionUID.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode new in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokespecial in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.rmi.server.Operation.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode anewarray in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode ifnull in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokestatic in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method class$(java.lang.String) of class com.sun.jcclassic.samples.rmi.PurseImpl_Stub.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode aastore in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported bytecode invokevirtual in clinit method.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method getMethod(java.lang.String, java.lang.Class[]) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode goto in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unhandled bytecode pop in clinit method, try a different compiler.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of method class$.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method forName(java.lang.String) of class java.lang.Class.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported return type String of invoked method getMessage() of class java.lang.Throwable.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String) of class java.lang.NoClassDefFoundError.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnmarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method invoke(java.rmi.Remote, java.lang.reflect.Method, java.lang.Object[], long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported long type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type long of invoked method newCall(java.rmi.server.RemoteObject, java.rmi.server.Operation[], int, long) of class java.rmi.server.RemoteRef.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.MarshalException.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported String type constant.
[convert] error: com.sun.jcclassic.samples.rmi.PurseImpl_Stub: unsupported parameter type String of invoked method <init>(java.lang.String, java.lang.Exception) of class java.rmi.UnexpectedException.At the first command prompt, I typed cref -o demoee
and at the next command prompt, I typed ant all, and I got those error messages.
Thanks, you are so nice to help :)
Jack

Java card simulator and WTK communication problem.

Similar Messages

Maybe you are looking for