Java component reinstallation for SAP XI

Hi All,
Java component for SAP XI has got corrupted and we are unable to start our SAP XI server. So can we reinstall Java component without reinstalling whole SAP XI server.
Please guide
Regards,
Nitin Patil

hi
we can reinstall java components alone
regards
kummari

Similar Messages

How do I know if I can install a JAVA component on a SAP product ?

Dear SAP,
I have a generic question.
I need to know if a JAVA Component can be installed in a system.
Let's take an example :
==> There is EP Core Java Component.
==> My question : May I install this JAVA Software Component EP Core in a SAP SRM 7.0 / NW 7.01 system ?
I know there is http://service.sap.com/scl link which explain the content of each SAP Product and SAP Software Component.
But how do I know if a specifif JAVA Component (example EP Core, SAP MDM Server, ...) can be installed on each SAP AS-JAVA ?
Best regards
CP2009

Dear CP2009
This information is stated in guides but a quick trick can be the following
Go to [https://service.sap.com/sp-stacks] and click on "sp stack download" in the left pane menu.
Then select your product version on right pane for example SP Stack SAP SRM 7.0
This will open a popup window
Fill in start stack and target stack (can be whatever in this case, it's just to check what usage types are available)
On one of the next screen you will have to choose which usage types are installed.
From that screen I can derive that for product "Portal Content SRM" or "SRM Supplier Java" you need component EP Core.
Kind regards
Tom

ABAP & Java Concepts required for SAP-NW XI/PI

Hi Experts,
As a fresher, I want to start a career in SAP ans SAP Netweaver- XI/PI. After going through some blogs, forum, sap stuff etc, I came to know the prerequisites for XI is both ABAP and Java...
But I am not sure which concepts in ABAP and Java are required for an SAP XI consultant, as I see SAP itself is an Ocean. So Apart from XI concepts , what are all the concepts needed in ABAP and Java.
As for XI concepts are concerned there is a lot of stuff in SDN itself. Only thing is, one shd have patience to search and proper guidance while learning.
Regards,
Guru

>
Guru Bhai wrote:
> Where and when do we need ABAP and Java in XI
something quite common a question but here is a small desc.
ABAP -
for scenarios involving, IDoc, RFC, ABAP proxies and ABAP mappings
Java -
Core java - UDFs in graphical mapping
advanced - java mapping, adapter modules, java proxies etc

Wrong Component Version for sap system

Hi All,
I upgraded CRM 7.01 to EHP3 / NW 7.40.
But in System -> Status Component version is SAP System Component version is EHP7 for SAP ERP 6.0 and not SAP CRM ABAP 7.01 EHP3.
The upgrade was successfull and APPL component is at 7.40 04.
I need to correct SAP System Component version. This made some confusion for my college.
Is any body has the same problem.
Thanks for any help.

Hello Reagan,
Here is result and explanation .

Where to download the JAVA component for BS2005 and SAP XI ?

Dear all,
When I install the ECC6 in Linux, system reminder me that the JAVA package is not correct. I wonder where to get the right JAVA component for BS2005? Btw, where to download the SAP XI Component for installation? Tks.
Regards
Jialin

all,
I have got it from delivered DVD.

SAP NetWeaver CE 7.2 Installation error in Deploying java component phase

Dear Experts,
                    I am installing CE7.2 but i am getting error in 37th phase (DEPLOY JAVA COMPONENT). Error message as
An error occurred while processing option SAP NetWeaver Composition Environment (CE) 7.2
> Installation Options > Application Server Java > Standard System > Standard System(
Last error reported by the step :Execution of Deploy Controller Runner tool '/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/sapjvm/sapjvm_6/bin/java -
classpath /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_jce.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_jsse.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_smime.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/iaik_ssl.jar:
/usr/sap/CE1/SYS/global/security/lib/tools/w3c_http.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar:
/usr/sap/CE1/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar:
/tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/install/lib/tc~je~cl_deploy.jar
-Xmx256m -Ddc.api.verbose=false
com.sap.engine.services.dc.api.cmd.Runner
deploy -l /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/deploy.lst -e stop -u lower
-w safety --lcm bulk -t 14400000 --host sapnce --port 50004' aborts with return code 104.
Error message is 'undefinedStatus:InitialDescription:. SOLUTION: Check 'undefined' and '' for more information.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to /tmp/sapinst_instdir/NW72/INSTALL/NW72/ORA/STD/.*
J2EE is running but I checked the cat /home/ce1adm/JdbcCon.log message as ,
Start: Sun Sep 26 02:23:40 IST 2010
                    OK: connected to CE1 on jdbc/pool/CE1
                    OK: disconnected
                    Stop: Sun Sep 26 02:23:42 IST 2010*
                    sapnce:ce1adm 16>
                          Then I had checked the R3 trans and log file is
4 ETW000                                                                                32 0.117400
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '1017'                         26 0.117426
4 ETW000 [dev trc     ,00000]     set_ocica() -> SQL error code 1017                                     21 0.117447
4 ETW000 [dev trc     ,00000] -->oci_get_errmsg (con=0, rc=1017)                                        21 0.117468
4 ETW000 [dev trc     ,00000]     OCIErrorGet -> SQL error code: 1017                                    84 0.117552
4 ETW000 [dev trc     ,00000]     ORA-01017: invalid username/password; logon denied
4 ETW000                                                                                30 0.117582
4 ETW000 [dev trc     ,00000]     DbSlConnect(con=-1) -> orc=0, 99=DBSL_ERR_DB                           23 0.117605
4 ETW000 [dblink      ,00000] ***LOG BY2=>sql error 1017   performing CON                               93 0.117698
4 ETW000 [dblink      ,00000] ***LOG BY0=>ORA-01017: invalid username/password; logon denied            24 0.117722
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'CE1'"
                    Please help me in this I strucked in this step for last 1 day.
Regards,
Sampath
Edited by: Matt on Sep 28, 2010 8:54 AM - changed formatting for readability

Sorry friends, this thread was already answered and closed by some one I have open a new Thread for my issue.
Hi All,
I am facing similar issue , My error also similar , Here is the summery of the error, Please help I got stuck very badly here past 2 days....I have 250 GB free space in the directory were usr/sap directory.
An error occurred while processing option SAP NetWeaver 7.3 Developer Edition > Install > Custom Server Installation( Last error reported by the step: Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW73\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jce.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_jsse.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_smime.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/iaik_ssl.jar;C:/usr/sap/ABC/SYS/global/security/lib/tools/w3c_http.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~exception~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~je~clientlib~impl.jar;C:/usr/sap/ABC/J00/j2ee/j2eeclient/sap.com~tc~logging~java~impl.jar;C:/Program Files/sapinst_instdir/NW73/INSTALL/DEVSYSTEM/install/lib/tc~je~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.
Thanks
Naveen

CMS import for SAP ESS component(SP 15) fails with fatal error.

Hi,
We are working on EP 7.0 SP 15. We have a requirement for changes to be made to SAP delivered ESS codes. We have set up the NWDI and and from the checkin tabn of CMS, the components SAP-JEE (7.00 SP18 ), SAP_JTECHS(7.00 SP18 ), SAP_PCUI-GP(SP 18), EP_BUILDT (7.00 SP18 )and SAP_BUILDT (7.00 SP18 )have been imported successfully to the development tab. But when we try to import the SAP ESS 600(SP level 15) from Checkin tab to the Development tab, the import fails. The exception chain as checked by clicking Details button in teh Develepoment tab of CMS shows the details as:
20090610145206 Info   :Starting Step Repository-check at 2009-06-10 14:52:06.0283 +5:00
20090610145206 Info   :Component:sap.com/SAP_ESS
20090610145206 Info   :Version :MAIN_ERP05PAT_C.20090427083436
20090610145206 Info   :1. propagation request is of type TCSSoftwareComponent
20090610145206 Info   :Propagatable:d647b419330511de9f130030057116fe exists allready in the repository. No import necessary.
20090610145232 Fatal :VcmFailure received
20090610145232 Fatal :caused by Exception:com.tssap.dtr.client.lib.deltavlib.VcmFailure: Internal Server Error [(pre||post)-condition failed: Internal Server Error]:Internal Server Error [(pre||post)-condition failed: Internal Server Error]
com.tssap.dtr.client.lib.deltavlib.VcmFailure: Internal Server Error [(pre||post)-condition failed: Internal Server Error]
     at com.tssap.dtr.client.lib.deltavlib.impl.AbstractCommand.checkedExecute(AbstractCommand.java:196)
     at com.tssap.dtr.client.lib.deltavlib.impl.VersionSet.integrate(VersionSet.java:160)
     at com.tssap.dtr.client.lib.deltavlib.impl.VersionSet.integrate(VersionSet.java:148)
     at com.sap.cms.tcs.client.DTRCommunicator.integrateChangelist(DTRCommunicator.java:544)
     at com.sap.cms.tcs.core.RepositoryImportTask.integrateResource(RepositoryImportTask.java:816)
     at com.sap.cms.tcs.core.RepositoryImportTask.processRepositoryImport(RepositoryImportTask.java:367)
     at com.sap.cms.tcs.core.RepositoryImportTask.process(RepositoryImportTask.java:651)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:206)
     at com.sap.cms.tcs.core.TCSManager.checkPropagationRequests(TCSManager.java:517)
     at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:179)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:500)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImportCheck(ImportQueueHandler.java:130)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImportCheck(CmsTransportProxyBean.java:720)
     at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0_0.startImportCheck(LocalCmsTransportProxyLocalObjectImpl0_0.java:1844)
     at com.sap.cms.ui.wl.Custom1.ImportCheck(Custom1.java:9968)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.wdInvokeEventHandler(InternalCustom1.java:3156)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingCustomController.invokeEventHandler(DelegatingCustomController.java:89)
     at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:345)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
20090610145232 Fatal :caused by Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailure received: Internal Server Error [(pre||post)-condition failed: Internal Server Error]:communication error: VcmFailure received: Internal Server Error [(pre||post)-condition failed: Internal Server Error]
com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailure received: Internal Server Error [(pre||post)-condition failed: Internal Server Error]
     at com.sap.cms.tcs.client.DTRCommunicator.integrateChangelist(DTRCommunicator.java:563)
     at com.sap.cms.tcs.core.RepositoryImportTask.integrateResource(RepositoryImportTask.java:816)
     at com.sap.cms.tcs.core.RepositoryImportTask.processRepositoryImport(RepositoryImportTask.java:367)
     at com.sap.cms.tcs.core.RepositoryImportTask.process(RepositoryImportTask.java:651)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:206)
     at com.sap.cms.tcs.core.TCSManager.checkPropagationRequests(TCSManager.java:517)
     at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:179)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:500)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImportCheck(ImportQueueHandler.java:130)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImportCheck(CmsTransportProxyBean.java:720)
     at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0_0.startImportCheck(LocalCmsTransportProxyLocalObjectImpl0_0.java:1844)
     at com.sap.cms.ui.wl.Custom1.ImportCheck(Custom1.java:9968)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.wdInvokeEventHandler(InternalCustom1.java:3156)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingCustomController.invokeEventHandler(DelegatingCustomController.java:89)
     at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:345)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
20090610145232 Info   :Step Repository-check ended with result 'fatal error' ,stopping execution at 2009-06-10 14:52:32.0796 +5:00
The above log is displayed when I click the import -check button on the development tab of CMS. The same error is displayes when the import button is clicked with only the last sentence changed to:
Step Repository-check ended with result 'fatal error'
Can anyone help me on this.... ?
Thanks,
Sonali.
Edited by: Sonali M S on Jun 10, 2009 1:16 PM

Hi Bala,
The problem still remails even after making changes in Visual Admin as per the thread Re: Assembly finished with errors
Also from http://<server>:<port>/nwa we have run the configuration task for "Initial setup of functional unit Development Infrastructure (DI all-in-one)" and there we donot have the option for individual CBS, CMS and DTR installations as told in the thread.
The other thread import into devlopment failed tells about the SAP note: 988010 iin which it is mentioned that this has been fixed in SP 11 for 7.00 version. We are already on SP 18. So it is assumable that this thing has already been fixed.
Can there be any other reason for this?
Thanks,
Sonali.

Calling a java webdynpro component inside a SAP Workflow

Hi Experts ,
Is it possible to call a java webdynpro component inside a SAP Workflow from the task .
If yes please let me the procedures .
Regards
Sarmistha

Someone has posted this, Take a look if it helps you:
"1. Activate your service in transaction SICF;
2. Activate the WS_HANDLER in SICF (probably you have to do more in SICF, SAP notes will be given to you in your browser when you want to call the service);
3. Make the correct settings in WF_HANDCUST;
4. Do ofcourse SWU3 including webserver activities;
5. Define how you want to call the service via WF_EXTSRV including parameters;
6. Generate a task from your defined service in WF_EXTSRV;
7. Incorporate this task in your workflow definition;
8. Test your workflow. Here you probably get some errror messages that the service cannot be called by for instance inactive ICF services. Activate the correct paths in transaction SICF."
Regards, IA
<MODERATOR: For reference, that 'Someone' was Joost in [this thread|Re: Callback from WebDynpro to Workflow]>
Edited by: Mike Pokraka on Jun 19, 2008 4:52 PM

Post installation guide for SAP SneakPreview for java stack

Hi Experts,
I have installed the SAP SneakPreview for java stack on my laptop. Also installed NWDS 7 in the laptop. Then tried the first Web Dynpro tutorial in SDN. But nt able to deploy the Web Dynpro application. My SDM, dispatcher and server0 are running. Infact i gave the settings for the SAP Enterprise Portal and SAP J2EE Engine in the Preferences page. For SAP J2EE Engine i selected the --SAP J2EE engine installed on local host.(second option). Inspite of all these settings it is giving a deployment error. Please do help me out. Thanks a lot in advance.

hi,
I downloaded the same from the same URL and followed the instructions. Here is the exact error msg while deploying my first Web Dynpro application--
Jul 31, 2007 9:43:16 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : CHAK
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/CHAKRA1/LOCALS~1/Temp/temp34211Welcome.ear
Result
=> deployment aborted : file:/C:/DOCUME1/CHAKRA1/LOCALS~1/Temp/temp34211Welcome.ear
Aborted: development component 'Welcome'/'local'/'LOKAL'/'0.2007.07.30.22.40.05':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Only Administrators have the right to perform this operation.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted

Creation of "Web Dynpro for Java" for SAP transaction

Hi All,
In EP when we create SAP transaction iView for SAP transaction,
a)ITS server is required if we choose SAP GUI Type as WebGui(Performance wise as well as some other issues)
b)SAP GUI has to be installed if we choose SAP GUI Type as WinGui.(User has to install SAP GUI).
Can we overcome these two issues by creating Web Dynpro application for SAP transaction in quicker way. Any suggestions are appreciated.
Thanks and Regards,
Gangadharayya.

Hi,
It is not possible to display a transaction directly in a java web dynpro. If you do not want to use a transaction iview the only other possibility is to create a web dynpro that uses BAPI's as models.
Regards,
Christophe

Best practice for Web Dynpro for Java to connect to SAP HR

What is best way to connect Web Dynpro for Java application deployed in SAP portal to connect to SAP HR ?
Is it good practice to connect to underlying SAP database ( eg oracle) directly to get the data or is there a better way ?
This below article describes to connect to external DB, however Is there any other way for SAP HR ?
http://wiki.sdn.sap.com/wiki/display/WDJava/WebDynproApplciationwithDatabaseMS+Access

Hi,
There are 2 supported ways :
First is to use JCO connections to call abap RFC enabled function modules. (BAPIs for example)
Second is to call SOAP web services (HR enterprise services for example)
You should never access directly database tables...
Regards,
Olivier

Component Version Dependencies of SAP EHP1 FOR SAP NW PI 7.3 & SAP EP 7.3

Hi,
Our Client is plannig to implement SAP EHP1 FOR SAP NW PI 7.3 & SAP Enterprise Portal 7.3.I have been asked to find out any component version dependencies or pre-requisites for these 2 SAP products.I am not getting it from anywhere.If anyone has any information please do reply me back.
Note : Currently there is no PI,EP system in our landscape.

Hi,
It will work with EHP5. We also have same systems in our landscape.
And I would suggest you to read the guide below
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b765af-91a5-2e10-9692-d4764d024cb3?QuickLink=index&overridelayout=true
Thanks
Sunny

Component Version "SAP ERP 6.0" instead of "EHP 4 for SAP ERP 6.0 /7.0"

Hi All,
We went to ERP Enhancement Package 4 in ours SAP Systems.
We performed the upgrade (with the SAPehpi tool) in DEV and TEST, the weird part is that in DEV the System Data - Component Version shows "SAP ECC 6.0" and in TEST shows "EHP 4 for SAP ERP 6.0 /7.0".
The 2 systems have the same SP level.
Any idea ?
Thanks,
Juan.

Hi,
After EHP4 upgrade it should show ECC 6.0 only.
check below thread:
/thread/1432042 [original link is broken]
Thanks
Sunny

Third Party tool for sap neteraver Java/EP administration

Hi Experts,
Do we have any third Party tool for SAP Neteweave -java or Portal administration like Wily?
I am looking any tool that can generate graphical reports for System health cheack and all like Wily Interscope.
Thanks
Narpal

Hi,
I hope links like this are allowed with the new SDN rules. We use something called [Click Stream|http://www.sweetlets.com/click_stream.html].
Quite nifty little tool and not even expensive.
Regards,
Andi

What J2EE engine for SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Ed

Hi experts,
I am installing SAP NetWeaver 7.0 (2004s) Trial Version - Full Java Edition. For that
1.what J2EE engine sholud be installed?
2.where is it available?
3.give Installation procedure for this.
They have given it as trial version will it expire soon.
Regards,
karthik.

hi karthi,
This Section provides information on how to prepare the standard installation of the SAP System.
The below mentioned steps are to be done before going for a installation.
1.     Check the Resolution of the Screen - Screen resolution to be set to 1024 X 768.
2.     Check for Screen Saver Settings - Screensaver to be set to OFF
3.     Check for Installed OS and Service Pack.
4.     Check for all the Hardware related details Installation of drivers
5.      Check for Data Throughput for Network Adaptors.
Right Click the Local Area Connection -> Select Properties -> Select File & Printer Sharing for Microsoft Networks and click on Properties -> Click radio button for Maximize throughput for Network Connection
go to SAP market place web site u got more information about this
Regards,
P.Manivannan.

Java component reinstallation for SAP XI

Similar Messages

Maybe you are looking for