Java connector calls against sap system with logon groups

hi there.
i want to use java connector to connect to a sap system and run a function. my problem: the sap system has more than one instance and i do not want to connect against the central instance. i want to use a logon group. does anyone have an idea how to handle this?
thanks,
martin

hi,
check this
http://help.sap.com/saphelp_nw04/helpdata/en/f6/daea401675752ae10000000a155106/frameset.htm
http://nwadave.com/NwadExplorer/data/SAPDoc/architecture/SAP-Client_LogonAndCommunication.doc
let me know u need any further info
bvr

Similar Messages

Send Idoc's to R/3 System with logon group

Hello everybody,
I have the next scenario
Sender R/3 Idoc -> XI -> Receiver R/3 Idoc
now I have a doubt, the receiver system has a logon group, is there any benefits for me in XI to use the logon group to send the Idocs to this system?, and if it's better to use logon group how can I use it, juts by defining the RFC that exists in SM59 that points to the receiver R/3 system in XI as load balancing and pointing to the logon group????, thanks in advance for your answers.

Julio,
Yes you are right, load balancing can be achieved using logon groups in the RFC destination for the IDoc adapter. It basically enables the ABAP dispatcher to decide whats the best available application server to process the inbound message sent by PI.The purpose is to load-balance successive connections across a group of ECC application servers.
To do this a connection is established through the message server (the central ECC instances communication process) to determine which ECC instance is to handle the RFC call.
The key parameters here are:
u2022     the hostname, on which the message server process runs,
u2022     the system name of the ECC central instance, and
u2022     The logon group, which indicates the cluster of applications servers that an ECC instance will be selected from, to serve the request.
Greetings,
Gerardo.

Integrating SAP System with Third Party Software

Hi,
I am working on an implementation project and need to integrate SAP system with a third party system. SInce I am a functional consultant, I am finding it tough to understand the integration issues. Can somebody explain me how to link up the two systems and what are the various tools available for this ?
Regards,
Rohit

Hi,
Inorder to integrate various systems we have various interface methodologies provided by SAP.
SAP systems use the following interface technologies:
ALE: Application Link Enabling
BAPI: Business Application Programming Interface
CPI-C: Common Program Interface Communication
EDI: Electronic Data Interchange
HTTP: HyperText Transfer Protocol
LU 6.2: Logical Unit Type 6.2
RFC: Remote Function Call
OLE: Object Linking and Embedding
SMTP: Simple Mail Transfer Protocol
SOAP: Simple Object Access Protocol
TCP/IP: Transmission Control Protocol / Internet Protocol
XML: Extensible Markup Language
In general we use ALEs and BAPIs.
The ALE uses IDOCs as the data transfer medium and need various middle ware systems inorder to receive and process these IDOCs.
BAPIs use Remote enabled functions which can be accessed from any platform also using any language ( like JAVA, VB etc).
Thanks and regards.

RFC Send could not be resolved against SAP system because its metadata could not be obtained...EXCEPTION FU_NOT_FOUND RAISED

Hello,
I am getting the following error in sending IDOC to SAP via WCF-SAP adapter in BizTalk Server 2009. I have the SOAP header in the adapter mentioned below. Also, wondering what is the convension for Action URL? Is it always "http://Microsoft.LobServices.Sap/2007/03/Rfc/"
+ Operation name mentioned in the Orchestration? I would appreciate if anyone could help me resolve this error.
The adapter failed to transmit message going to send port "SendReceive_PO_IDOC_TO_SAP" with URL "sap://CLIENT=111;LANG=EN;@a/123.456.789.101/00?GWHOST=123.456.789.101&GWSERV=sapgw00&ListenerProgramId=ABCDEF111&RfcSdkTrace=False&AbapDebug=False".
It will be retransmitted after the retry interval specified for this Send Port. Details:"Microsoft.ServiceModel.Channels.Common.MetadataException: RFC Send could not be resolved against SAP system because its metadata could not be obtained. ---> Microsoft.Adapters.SAP.RFCException:
Details: ErrorCode=RFC_EXCEPTION. ErrorGroup=RFC_ERROR_APPLICATION_EXCEPTION. SapErrorMessage=EXCEPTION FU_NOT_FOUND RAISED. AdapterErrorMessage=An error occurred while determining the function interface of the RFC Send.
at Microsoft.Adapters.SAP.RFCException.HelperThrow(Int32 retCode, String additionalErrorMessage)
at Microsoft.Adapters.SAP.RfcClientConnection.GetRfcFunctionInterface(String rfcName)
at Microsoft.Adapters.SAP.InternalRfcMetadata..ctor(String originalRfcName, SAPConnection sapConnection)
at Microsoft.Adapters.SAP.SAPMetadataContract.ResolveOperationMetadata(String operationId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetOperationMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.MetadataLookup.GetOperationDefinition(String operationId, TimeSpan timeout)
at Microsoft.Adapters.SAP.SapFunctionMetadata.ResolveOperationMetadataUsingSdk(String absoluteName, String displayName, String funcName, String operationNamespace, SAPConnection sapConnection, Boolean isTrfc, MetadataLookup metadataLookup, TimeoutHelper
timeoutHelper)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)".
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
SOAP Header:
<BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Operation Name="Send" Action="http://Microsoft.LobServices.Sap/2007/03/Rfc/Send" />
</BtsActionMapping>
Thanks,
Tarun

Hello Morten,
The Send is actually just the name of the operation in Orchestration and it does not exist in SAP. Hence, do I really need to have the SOAP header in WCF-SAP adapter or can I send the IDOC without any SOAP header info? When I try to send without
SOAP header I get the following error. Can you help me resolve this?
The adapter failed to transmit message going to send port "SendReceive_PO_IDOC_TO_SAP" with URL "sap://CLIENT=111;LANG=EN;@a/123.456.789.101/00?GWHOST=123.456.789.101&GWSERV=sapgw00&ListenerProgramId=ABCDEF111&RfcSdkTrace=False&AbapDebug=False". It
will be retransmitted after the retry interval specified for this Send Port. Details:"System.ArgumentNullException: Value cannot be null.
Parameter name: key
at System.ThrowHelper.ThrowArgumentNullException(ExceptionArgument argument)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.CreateChannelFactory[TChannel](IBaseMessage bizTalkMessage)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.InitializeValues(IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2..ctor(IBaseMessage message, WcfTransmitter`2 transmitter)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfTransmitter`2.GetClientFromCache(String spid, IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfAsyncBatch`2.BatchWorker(List`1 messages)".
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks,
Tarun

Transaction iView( Tcode) Error: Function call in SAP GUI with errors

Hey Guys:
I use Transaction iView to show the ABAP application on Portal. The application works to import data from client to BW. After I fill all the information and execute the application, the system returns the error message " Function call in SAP GUI with errors".
The ABAP application works fine on SAP GUI, so it should not be the program problem.
Any Suggestion for this will be nice. Thanks for your help.

Hey Duy:
Thanks for your response. I check the servers which i have access, and all of them cannot work correctly.
First, other iViews(Dynpro,BW Report,BSP,KM...) work fine.
Second, our backend system is a BW server.
I try to do so on our EP production and development, also connect them to our BW production and development servers. All of those are failed and have the same problem.
The t-code comes from our abap program and register on BW server, and hte program works fine when I use SE38 to execute it.
PS. The Transaction iView works fine before, but I have no idea why it just crash now.
Please let me know if you have any suggestion about this.

Installing SAP system with MSCS

Hi,
Anyone can give me the steps for installing a SAP system with MS cluster?
Window server 2003, MS. SQL 2005, SAP ECC6.0
Regards
Chin

Hi,
Refer SAP Installation guide in http://service.sap.com/instguides
I will give an overview about the installation process.
Basic setup of MSCS 5.2 for SAP involves 2 systems, we will name it as node A(First MSCS node) and B(Additional MSCS node)
3 Cluster groups should be created for SAP, Database, Quorum
MSCS should be configured between node A and B, test the cluster by moving the groups between node A and B. Its very important to note that, Quorum disk group should not be taken offline. If its goes offline there are chances of cluster getting crashed.
Steps to be followed for SAP Cluster Installation
     In Cluster Admin, move the disk groups and shared disks to first MSCS node.
     On the first MSCS node, install the MS SQL Server 2005 64-Bit
             In Cluster Admin, move the disk groups and shared disks to Additional MSCS node.
     On the Additional MSCS node, install the MS SQL Server 2005 64-Bit
     In Cluster Admin, move the disk groups and shared disks to first MSCS node.
     Install the Central Services Instance for ABAP (ASCS) on first MSCS node.
     Install the Central Services Instance for Java (SCS) on first MSCS node.
     Cluster the First MSCS node
     Install the Database Instance on the First MSCS node
     Cluster the Additional MSCS node
     Install Enqueue Replication Server for ABAP and Java(Optional)
     Install the Central Instance
     Install at least one Dialog Instance
Before starting the installation, make sure that system logged on as Cluster Administrator.
Hope it helps
Regards
KT

Trouble in a SAP system with load balancing

Hello masters:
I had a trouble with workitems that came from a SAP system with load balancing. They doesn't receive the workitem ID in the UWL.
I created another system in the portal as a "dedicated application server", and made the necessary configuration in order to replace the first one, and then my workitems worked fine.
However, I would like to know what appened with the first system created as "system with load balancing". Why this system didn´t pass the workitem ID to the application (web dynpro abap) that execute the workitems?
Thank you.

I hope there was some missing configuration in the first case which was not replicating the workitem from SAP Inbox to UWL.
Thanks
Arghadip

Function call in SAP GUI with errors

Dear All,
             When i am calling FM of Comports using OLE Integration i got " Function call in SAP GUI with errors" error
now my front end version is 6.40. how to solved this problem.
In my Function Module i am creating object like this
CREATE OBJECT O_OBJ 'MSCOMMLib.MSComm.1'.
    IF SY-SUBRC <> 0.
      RAISE NO_CREATE_OBJECT.
    ENDIF.
it raised the sy-subrc = 2 this error is "Function call in SAP GUI with errors"
send to me how to handle this error.
Thank,
Vijay.g

Hi Vijay,
We are facing the same issue.
Interestingly
From program's code only we are facing this issue.
If we display the program and Execute (Direct processing), it is working fine.
Can you please share how you resolved this issue.
Thanks
Sreedhar

App.server load balancing for SAP System with 1 PS

Hi,
In SAP CPS 7.0 (Build M26.12) I have a SAP system with Central Instance + 10 App.servers, but all instances are managed by 1 ProcessServer.
After activating the "App.server load balancing" setting in SAP system definition the application servers are becoming visible in CPS with their load factors (number of BGD wp's on app.servers) and load numbers (number of active jobs on app.servers).
This is so far fine, but the additional functionality is not working as I would expect, I have issues with 2 functionalities:
1. Based on documentation after activating also the XAL connection the CPS should submit the job on app.server with best performance based on XAL monitoring data filling the TARGET_SERVER parameter.
This functionality is not working for me at all
2. A useful functionality after activating the "App.server load balancing" setting is that the ProcessServer is going to "Overloaded" status when all BGD wp's of SAP system are occupied, thus restricting submitting new jobs during overload situation. But I had an issue also with this functionality, after SAP system recovery from overload situation, the CPS still remained in Overload status (so no new jobs were submitted).
As a workaround I had increased the treshold values for loads on all app.servers for this SAP system, what was fine for several days, but after a while I believe this was a reason of unexpected performance issues in CPS, therefore I have deactivated the 'App.server load balancing" setting at all for this ProcessServer.
I would appreciate your feedbacks with this functionality.
Thanks and Regards,
Ernest Liczki

Hi Preetish,
This connect string option is to loadbalance RFC connections. These are balanced upon login, once you are connected to a particular application server (AS) you stay on that server until you reconnect.
Since CPS uses multiple RFC connections, this will result in the connections being distributed over the available AS resources which is fine as long as they are generally evenly loaded. If you have certain AS hosts that are continuosly more loaded than the rest, then you probably don't want the CPS RFC connections to end up on these servers.
The original question is about loadbalancing of batch jobs over the available AS resources, and this is done independent of the RFC connection load balancing. Even if all CPS RFC connections are pinned to the DB/CI host, you can still loadbalance jobs over the available SAP AS hosts, either by using SAPs builtin balancing, or the CPS algorithm by activating the checkbox as indicated in the first entry in this thread.
Finally, to reply to Ernest's question: I believe there are some fixes on the app load balancing in the latest release, M26.17 should be available on the SWDC now.
Regards,
Anton.
Edited by: Anton Goselink on May 29, 2009 9:06 PM

Is it possible to install two SAP system with same SID but different instance numbers on one host?

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
If yes, then how?
If no, then why?
Thanks in advance.
Regards,
Sarim

Is it possible to install two SAP system with same system ID (SID) but different instance numbers on one host?
Yes, it is possible. If one is CI (PAS) and the second one is an AS (AAS). In this case there will be only one database.
If you are talking about two separate SAP systems with separate databases (Eg: A BI and an ECC) with the same SID then the problem will be with the database (Eg: Oracle)
The database will be installed under /oracle/SID/112_64 (ORACLE_HOME) unless one database is running on 10 G and in that case the ORACLE_HOME will be /oracle/SID/102_64
The next issue will be with the SAP file systems like /sapmnt/SID
The most important problem will be with the switch to the sidadm and orasid users and the conflicts there. If there is a need to stop one of the SAP systems and if you do a switch to sidadm and issue a stopsap command which system will be stopped ?
These are few of the many problems I can think of.
So if we are talking about two separate systems with their own databases I would rule out the possibility of having two systems with the same SID.
Regards
RB

DBACOCKPIT Connection for SAP systems with SAP Router

Hello!
We are trying to integrate all the remote SAP systems and their databases (primarily Oracle) into DBACOCKPIT of SAP Solution Manager 7.1.
Our SAP Solution Manager is running on Windows with Oracle 11.2.0.2
The most SAP systems (Unix and Windows) can only be reached from SAP Solution Manger over the SAP Router connection.
It means no direct ping from Solution Manager server to the Server of managed system will work.
Question
Is it possible to integrate such SAP systems (with SAP Router) into DBACOCKPIT of Solution Manager?
According to sap note 1265134 only the DBCON-connection will be required.
By doing so (tcode SOLMAN_SETUP), we get TNS errors.
Do we miss some additional steps (adapting tnsnames.ora of SOLMAN with the entry of managed system), etc.?
Thank you!
regards

SAP-SDN wrote:
> We of course can reach these systems via SM59.
>
> The question still is whether or not the several SAP systems with Oracle that can be reached from Solution Manager over SAP Router can be integrated into DBACOCKPIT of SAP Solution Manager in order to gather/ analyze performance data?
Systems can be reached via SM59, then what's the problem ?
In fact, this 'is' the standard procedure. This is as normal as you could have Solution manager in same 'network' with rest of the remote systems.
Answer should be yes, you can manage several remote sap systems from sap solution manager dbacockpit.
Thanks

How to logon the j2ee engine with logon group

hi everyone,
I have installed an HA j2ee engine system with MSCS.
But i donot know how to logon the DI&CI with logon group like ABAP system
Thanks very much
Regards
Peter

http://help.sap.com/saphelp_nw70/helpdata/EN/b5/e8239ef7bd494f896a84625d4b688f/frameset.htm

Using Java Connector Calling RFC.....But it's not returning correct result

Hi Friends,
In the code ....
I am calling Remote Function module ZRFC_PO_VEND_VALID using java connector and passing PO_Number and Vendor Number as input parameters and after execution it returns (E_POVALID =1 [PO_NUMBER exists for Vendor number] otherwise E_POVALID = 0 )
when i am executing the below code ....in both cases it is returning Zero value.
I tested the function module in se37 its working....
may i know the reason for this....
import com.sap.mw.jco.*;
@author Thomas G. Schuessler, ARAsoft GmbH
http://www.arasoft.de
public class TutorialBapi1 extends Object {
JCO.Client mConnection;
JCO.Repository mRepository;
public TutorialBapi1() {
try {
// Change the logon information to your own system/user
mConnection =
JCO.createClient("100", // SAP client
"abap", // userid
"abap", // password
"en", // language
"sapdev1", // application server host name
"00"); // system number
mConnection.connect();
mRepository = new JCO.Repository("ARAsoft", mConnection);
catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
JCO.Function function = null;
JCO.Table codes = null;
try {
function = this.createFunction("ZRFC_PO_VEND_VALID");
if (function == null) {
System.out.println("ZRFC_PO_VEND_VALID" +
" not found in SAP.");
System.exit(1);
//mConnection.execute(function);
JCO.Field vendID = function.getImportParameterList().getField("I_EBELN");
JCO.Field poID = function.getImportParameterList().getField("I_LIFNR");
vendID.setValue("20081");
poID.setValue("4500000017");
try {
mConnection.execute(function);
catch (Exception ex) {
     ex.printStackTrace();
     System.exit(1);
JCO.Field povalid =
     function.getExportParameterList().getField("E_POVALID");
//if (povalid.getValue() == null ){
     // System.out.println("Error Message");
System.out.println(povalid.getValue());
     //if (povalid == null ){
          //System.out.println(povalid.getValue("E_POVALID"));
          //System.out.println("Error Message");
          //System.exit(1);
catch (Exception ex) {
     ex.printStackTrace();
     System.exit(1);
mConnection.disconnect();
public JCO.Function createFunction(String name) throws Exception {
     try {
     IFunctionTemplate ft =
     mRepository.getFunctionTemplate(name.toUpperCase());
     if (ft == null)
     return null;
     return ft.getFunction();
     catch (Exception ex) {
     throw new Exception("Problem retrieving JCO.Function object.");
     public static void main (String args[]) {
     TutorialBapi1 app = new TutorialBapi1();
with warm regards,
Madhu.

Hi Ravi ,
I tried as per your sugggestion..still getting the same problem.
Regards,
Madhu!!

Thru Java connector to update SAP by BAPI

Dear...
How to bring the data from external application through the Java connector to SAP? Pls help....

Hai Check the following Document & Links
Bapi to create customer master
BAPI_CUSTOMER_CREATEFROMDATA
BAPI_CUSTOMER_CREATEFROMDATA1
Or you can use FM SD_CUSTOMER_MAINTAIN_ALL
what is BAPI?
BAPI stands for Business API(Application Program Interface).
I have answered this question before..
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Check these Links out
http://searchsap.techtarget.com/ateQuestionNResponse/0,289625,sid21_cid558752_tax293481,00.html
http://www.sap-img.com/abap/interview-question-on-bapi-rfc-abap-objects-tables.htm
http://www.sap-img.com/fu033.htm
http://www.sap-img.com/abap/ale-bapi.htm
Please check out this thread..
Re: bapi
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
<b>Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
Java Connector(JCO) can call not only BAPI's but also the function modules which are remotely enabled..
BAPI's as i said earlier are remotely enabled function modules..
Hence, JCO can call also BAPI's(n not only BAPI's as u mentioned).</b>
Thanks & regards
Sreenivasulu P

DB Copy (MSSQL) between two SAP systems with different level and Components

Hi,
we have a SAP system release mysap 2004 SR1 and for "the upgrade project to SAP ECC 6.0 " we installed a new mysap 2004 in a new hardware (sap03) where we have also solution manager running. The new installed Mysap 2004 SR1 is alos running fine in the new hardware.
Now we would like to do DB copy from the old system (sap02) to the the new system sap03 and then we will do the upgrade to SAP ECC 6.0.
After I compared the two systems I have following questions:
1) there are 4 Software Components which are not in the new system (sap03). This are:
PI
FIN_BLERP
BP_INSTRASS
Is this necesary for the DB copy or we do not need this to be able to do the DB copy?
2) The Software Components Level is not the same. Should we have the same level to do the DB Copy?
Thanks in advance
Best regards
HanseAtik

Hi Juan, hi Clas,
just to be clear and to not stuck on the the way:
The systems are as follow:
1) the source system:
                     - Windows Server 2003,
                     - MSSQL Server 2005 with 32 bit.
                     - Mysap 2004 SR1
2) Target system:
                   - Windows Server 2003
                   - MSSQL Server 2005, with 64 bit.
                   - Mysap 2004 SR1 (with less Support package level and no PI, FIN_Basis, BP_BLERP and BP_INTASS coponents)
I hope this will work. could you post the link the DB Copy guide we are talking about?
By this way we will be sure that we are talking about the same DB Copy. Otherwise any mistake in this step will cost more work and time.
Thanks in advance
Best regards
HanseAtik

Java connector calls against sap system with logon groups

Similar Messages

Maybe you are looking for