Java Dialer calling a phone

Hi
I am new to this forum i hope someone can help me?
I am developing a phone dialer in java that connects to asterisk.
The problem is that i don't know how to like connect to the sound card or something
because i want to be able to call a number through the computer without using a softphone.
Is there a way in java to make a call and if u have the code i need to create a call and speak
through the computer it would be much appreciated.
Thanks in advance
Edited by: JustinMuir on Sep 11, 2008 2:00 AM

Was this a mobile number or home number as home numbers for me anyway don't work if the area code hasn't been included
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

Similar Messages

  • Just got U-verse today, how do I set up speed dialing on my phone, I had it with the ATT service, but it does not work with the UVerse

    OK - I looked at the manual & see they made it major project. Instead of simply assigning tel numbers to each of the dialing digits, you have to build a directory record first, then you can assign the directory record to a dialing digit.
    Looks like the simple part is using it  - just press and hold the digit to dial the whole number.
    So, it will take 40 minutes or so to break down the steps in understandable prose. It is too late to start now & i have a vet appointment in the am. All day is kind of full. But, I will try to do it tomorrow (thurs the 18th)

    Seemed like there should be a speed dial, so I did  a search & found the cure is worse than the disease -
    Dial from your phone
    Make calls directly from your existing touch-tone home phone:
    Local calls: Dial the 7- or 10-digit phone number.
    Long distance calls: Dial 1 + area code + 7-digit phone number.
    International calls: Dial 011 + country code + 7-digit phone number.
    Dial online from your myAT&T account
    Call from your online Address Book or Call History, which shows a list of up to 100 of your most recent call records sorted by date and time:
    Log in to myAT&T. Don't have a myAT&T login? Register today!
    From the I want to menu, select Manage my plans and services and then Manage my phone features.
    Your U-verse portal will open and a Make a Call box will appear on the left side of the page.
    Enter a number to dial or select a number from your Call History or Address Book.
    Specify whether you'd like to activate/deactivate Caller ID Blocking and Call Waiting for the call.
    Select Place Call.
    When your home phone rings, pick it up to place your call.
    Important Note
    To find numbers in the Call History, you can also sort numbers by missed, answered, outgoing, name, length of call, or type, or search for a specific call.
    Dial from your U-verse TV
    With U-verse TV, you can view a list of up to 100 of your most recent incoming call records by date and time on your TV screen. Use your U-verse TV remote to tune to your Call History and return calls with the press of a button.
    Tune to Channel 9900 using your U-verse TV remote.
    Select a U-verse Voice phone number on screen.
    Press OK to view a log of answered and missed calls. You can sort by name, date, and phone number.
    Scroll using the arrows.
    Select a number and press OK to return a call.
    Select Call and press OK.
    When your home phone rings, pick it up to place your call.
    You can have a call list accesed from a browser.
    You can call back a historical call from the browser or TV.
    https://www.att.com/esupport/article.jsp?sid=KB401002

  • How do i view a received or dialed calls when i am on a call

    how do i view a received or dialed calls when i am on a call . where as in other phone like nokia htc you can do that but i would like to know weather it's possible in iphone

    Thanks a lot it was helpful... can you just help me out with the another problem . Regarding the alarm clock i keep the alarm @ 5.40am but evry time it rings at 5.10 as well as at 5.40 if i change the time also it rings before half an hour before the set time.

  • How can i dial up a phone number with iPad?

    How can i dial up a phone number with iPad?

    Smartgroschen is for free calls and text chatting. You can also use chat with video clips, pictures and your current position on the map. Smartgroschen is an instant messenger that allows you to connect with any Smartgroschen-user worldwide for free.At start you get 0,50 euro.

  • IOS 7....dial pad my phone freezes, have to exit out five times same with e mail at times

    iOS 7....when I want to use the dial pad my phone freezes up then won't allow me to go back to recent calls, I have to exit out of it four to five times before it works super slow...and same with e mail at times.  Why is this??  And also with the calendar, is there a way I can see what I have on the day without having to scroll all the way through the day??

    I'm sory but you can't downgrade to iOS 7.0.x
    the only thing you can do is a DFU reset and reinstall iOS 7.1.1
    I hope you backed up your iphone before, in the event you don't wanna lose you documents.
    Try and let we know

  • Auto-Dial from SIP phones after Interdigit Timeout

    I have a customer that needs to have their phones automatically dial a particular number if no digits are pressed after 10-15 seconds.  We are accomplishing this right now with our SCCP phones by having a blank translation pattern that points to an ambiguous hunt pilot.
    For example, we create a blank translation pattern that translates to a HP with number 300.  We also create a HP with number 3000.  The translation pattern is triggered, but because 300 is ambiguous (the call could possibly be destined for 300 or 3000) CUCM waits for the interdigit timeout before calling 300.
    This works beautifully for SCCP phones.  Unfortunately, it does not work for our SIP phones.  Does anyone have any suggestions to make this work?  SIP dial rules trigger immediately, so I'm afraid we haven't been able to leverage those.
    Thank You!

    Thanks for your comments, but I'm afraid you guys are missing the issue.
    Chris, you are correct that you can get a SIP phone to auto-dial a number via SIP dial rules.  The problem is that it triggers immediately.  I need the SIP phones to wait.
    Here's a scenario - SCCP phones are in use all throughout a nursing home.  Residents are told that they can simply knock their phone offhook if they need emergency help.  If they don't dial anything within 15 seconds, their phone will automatically call into the local emergency oncall nurse.  Sorta an "onstar" emergency help line for an old folks home.  We definitely can't have that rule triggering immediately though, as residents would never be able to place a normal call, and there would be no way of distinguishing the emergency calls from the guy who is just trying to call for pizza.  :)
    This function works perfectly with SCCP phones - while they trigger the blank translation pattern immediately, CUCM doesn't actually begin dialing because there are multiple potential matches for what the translation pattern is dialing.  SIP phones do not do this, however.  If you have the SIP dial rule applied, it always triggers immediately, and it does not wait to see if callers give any input.
    Thanks for any further suggestions you might be able to offer!

  • Transferring call from phone to bluetooth device

    My car has built in blue tooth. When I make a call from the phone I have 3 options on the screen:
    1. handsfree link (bluetooth)
    2. iphone
    3. speaker
    If I press "handsfree link" it does NOT transfer the call from the phone to the bluetooth until the other party answers. This is really strange, and causes a delay when the other person answers.
    Now I know I can use the car's bluetooth to place the call but there are times when I dial from the phone.
    Does anyone else have this issue? Is there a work-around for it?
    Thanks!

    I would contact your car manufacturer as they have all the information of teh bluetooth setup thats in your car. They will have a better idea whats going on as its there system.
    Have you tried it with any other phone or car bluetooth if its possible?
    Message was edited by: ataylor87

  • Iphone4 how do i recover all dialed calls

    how can i restore all dialed calls iphone 4

    Not sure what you mean.
    You can look at recents.  Other than this, there is no record on iphone.
    You could look at your phone bill.

  • About Dial call

    hi all , how to dial call via sdk , except for use1-408-555-5555
    I use it but it will open safari and close the host application .
    I do not want be like this , I want the host application is alive unless user exit it .
    any one know how to solve this problem ?
    thanks in advance for your help .
    Robin

    It's not clear what you're asking here, but let me try:
    1) you can make a phone call via the SDK directly by using the openURL method on UIApplication:
    NSURL *url = [NSURL URLWithString:@"tel:1-408-555-5555"];
    [[UIApplication sharedApplication] openURL:url];
    2) If you're attempting to make a call from a web page, then you're doing it correctly as far as I know.
    3) Regardless of the method used, once you tell the device to dial the phone, your application will be stopped and the phone application will be launched. iPhone does not allow applications to run in the background.
    4) Once the phone call has been established, the user may choose to relaunch your application, but they must make that decision.
    rob.

  • IOS 7 downloaded fine but I can't back up restored. Tried 3 times. Tried turning off iCloud. Now I can only receive texts and phone messages. I cannot make calls, retrieve phone messages or send any texts. When I try I just get a blank screen. HELP

    I initially tried to do this at 11:39pm last night. I cleaned up my apps, backed up to my computer and then took the plunge. It downloaded fine, everything went ok until I tried to restore backup. I received a message that there was an error in iTunes and iPhone could not be restored. I tried this three times giving up at 2:00 am. I tried again at 7:30am. No fix. Now I can open up phone and browse in safari. I can get notifications that a text was received or a phone message left but I can't receive or make phone calls, retrieve phone messages, or access any text features. Also I have NO purchased apps. I use my phone got work and this has ruined my day - please help!!

    I would start with going to O2 with the phone and making sure it's set up properly - maybe the SIM they gave you isn't quite right or their network isn't acknowleding it like it should.
    Seeing as you've tried restoring to factory settings and resetting network settings, I'm assuming you've tried restoring the phone as new, just to see if that helped at all. If that didn't help, you definitely need to get in touch with O2 and work things out with them.
    ~Lyssa

  • My dad and i use the same apple id, when he recieves a call, hes phone and my phone ring at the same time, why?

    my dad and i use the same apple id, when he recieves a call, hes phone and my phone ring at the same time, why?  and how do i fix this

    Settings > FaceTime > iPhone Cellular Calls > OFF

  • Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouT

    Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouTube for instance works just fine Siri  works just fine. I can't make a call or receive a call whatsoever because all I hear is static and I haven't dropped the phone in water nothing has really happened this literally happened overnight

    This is a wireless carrier issue.  The fact that the speaker & microphone work properly for other apps is a great indicator that your device is fine.
    Contact your wireless carrier about your call quality issue.

  • How can I dial to a phone number using land line, internal PC modem and LabVIEW 8.2

    I will start to write a LabVIEW 8.2.1 program which dial to a phone number using my Dell Inspiron, Windows XP. Does any body have an idea how can I do it? or better if any body have a vi ready.
    I will appreciate your help 
    Thanks in advance
    Solved!
    Go to Solution.

    The link Somil provided is very good.
    Neddless to say that you need a modem.  And the modem's user or programmer's guide.
    Most modems have the same command structure, however, there might be some nuances depending on the manufacturer and the model, hopefully taken care by the driver.  Oh yeah..  You'll need the driver. 
    I remember reading some posts and possibly some examples somewhere in this forum.  I'm sure a search will reveal a lot of information.

  • Java function call from Trigger in Oracle

    Moderator edit:
    This post was branched from an eleven-year-old long dead thread
    Java function call from Trigger in Oracle
    @ user 861498,
    For the future, if a forum discussion is more than (let's say) a month old, NEVER resurrect it to append your new issue. Always start a new thread. Feel free to include a link to that old discussion if you think it might be relevant.
    Also, ALWAYS use code tags as is described in the forum FAQ that is linked at the upper corner of e\very page. Your formulae will be so very much more readable.
    {end of edit, what follows is their posting}
    I am attempting to do a similar function, however everything is loaded, written, compiled and resolved correct, however, nothing is happening. No errors or anything. Would I have a permission issue or something?
    My code is the following, (the last four lines of java code is meant to do activate a particular badge which will later be dynamic)
    Trigger:
    CREATE OR REPLACE PROCEDURE java_contact_t4 (member_id_in NUMBER)
    IS LANGUAGE JAVA
    NAME 'ThrowAnError.contactTrigger(java.lang.Integer)';
    Java:
    CREATE OR REPLACE AND COMPILE JAVA SOURCE NAMED "ThrowAnError" AS
    // Required class libraries.
    import java.sql.*;
    import oracle.jdbc.driver.*;
    import com.ekahau.common.sdk.*;
    import com.ekahau.engine.sdk.*;
    // Define class.
    public class ThrowAnError {
    // Connect and verify new insert would be a duplicate.
    public static void contactTrigger(Integer memberID) throws Exception {
    String badgeId;
    // Create a Java 5 and Oracle 11g connection.
    Connection conn = DriverManager.getConnection("jdbc:default:connection:");
    // Create a prepared statement that accepts binding a number.
    PreparedStatement ps = conn.prepareStatement("SELECT \"Note\" " +
    "FROM Users " +
    "WHERE \"User\" = ? ");
    // Bind the local variable to the statement placeholder.
    ps.setInt(1, memberID);
    // Execute query and check if there is a second value.
    ResultSet rs = ps.executeQuery();
    while (rs.next()) {
    badgeId = rs.getString("Note");
    // Clean up resources.
    rs.close();
    ps.close();
    conn.close();
    // davids badge is 105463705637
    EConnection mEngineConnection = new econnection("10.25.10.5",8550);
    mEngineConnection.setUserCredentials("choff", "badge00");
    mEngineConnection.call("/epe/cfg/tagcommandadd?tagid=105463705637&cmd=mmt%203");
    mEngineConnection.call("/epe/msg/tagsendmsg?tagid=105463705637&messagetype=instant&message=Hello%20World%20from%20Axium-Oracle");
    Edited by: rukbat on May 31, 2011 1:12 PM

    To followup on the posting:
    Okay, being a oracle noob, I didn't know I needed to tell anything to get the java error messages out to the console
    Having figured that out on my own, I minified my code to just run the one line of code:
    // Required class libraries.
      import java.sql.*;
      import oracle.jdbc.driver.*;
      import com.ekahau.common.sdk.*;
      import com.ekahau.engine.sdk.*;
      // Define class.
      public class ThrowAnError {
         public static void testEkahau(Integer memberID) throws Exception {
         try {
              EConnection mEngineConnection = new EConnection("10.25.10.5",8550);
         } catch (Throwable e) {
              System.out.println("got an error");
              e.printStackTrace();
    }So, after the following:
    SQL> {as sysdba on another command prompt} exec dbms_java.grant_permission('AXIUM',"SYS:java.util.PropertyPermission','javax.security.auth.usersubjectCredsOnly','write');
    and the following as the user
    SQL> set serveroutput on
    SQL> exec dbms_java.set_output(10000);
    I run the procedure and receive the following message.
    SQL> call java_contact_t4(801);
    got an error
    java.lang.NoClassDefFoundError
         at ThrowAnError.testEkahau(ThrowAnError:13)
    Call completed.
    NoClassDefFoundError tells me that it can't find the jar file to run my call to EConnection.
    Now, I've notice when I loaded the sdk jar file, it skipped some classes it contained:
    c:\Users\me\Documents>loadjava -r -f -v -r "axium/-----@axaxiumtrain" ekahau-engine-sdk.jar
    arguments: '-u' 'axium/***@axaxiumtrain' '-r' '-f' '-v' 'ekahau-engine-sdk.jar'
    creating : resource META-INF/MANIFEST.MF
    loading : resource META-INF/MANIFEST.MF
    creating : class com/ekahau/common/sdk/EConnection
    loading : class com/ekahau/common/sdk/EConnection
    creating : class com/ekahau/common/sdk/EErrorCodes
    loading : class com/ekahau/common/sdk/EErrorCodes
    skipping : resource META-INF/MANIFEST.MF
    resolving: class com/ekahau/common/sdk/EConnection
    skipping : class com/ekahau/common/sdk/EErrorCodes
    skipping : class com/ekahau/common/sdk/EException
    skipping : class com/ekahau/common/sdk/EMsg$EMSGIterator
    skipping : class com/ekahau/common/sdk/EMsg
    skipping : class com/ekahau/common/sdk/EMsgEncoder
    skipping : class com/ekahau/common/sdk/EMsgKeyValueParser
    skipping : class com/ekahau/common/sdk/EMsgProperty
    resolving: class com/ekahau/engine/sdk/impl/LocationImpl
    skipping : class com/ekahau/engine/sdk/status/IStatusListener
    skipping : class com/ekahau/engine/sdk/status/StatusChangeEntry
    Classes Loaded: 114
    Resources Loaded: 1
    Sources Loaded: 0
    Published Interfaces: 0
    Classes generated: 0
    Classes skipped: 0
    Synonyms Created: 0
    Errors: 0
    .... with no explanation.
    Can anyone tell me why it would skip resolving a class? Especially after I use the -r flag to have loadjava resolve it upon loading.
    How do i get it to resolve the entire jar file?
    Edited by: themadprogrammer on Aug 5, 2011 7:15 AM
    Edited by: themadprogrammer on Aug 5, 2011 7:21 AM
    Edited by: themadprogrammer on Aug 5, 2011 7:22 AM
    Edited by: themadprogrammer on Aug 5, 2011 7:23 AM
    Edited by: themadprogrammer on Aug 5, 2011 7:26 AM

  • Java Applet call javascript problem

    Hi I have a web page as follow and embedded a applet. The applet call the java script, and instead of showing an alarm, the browser show the javascript code. Is that strange ? Any suggestion for this problem.
    HTML:
    ================================================================
    <HTML>
         <HEAD>
         function ShowEmbd()
              alert("Test Applet call Javascript");
         </SCRIPT>
         </HEAD>
         <BODY>
         <FORM NAME="AppletEmbdStart">
              <OBJECT classid="clsid:48B2DD7B-6B52-4DB0-97C9-ECB940113B47" id="CIVON_DEmbdObj" width="0" height="0"></OBJECT>
              <APPLET code="MyApplet.class" width="0" height="0"></APPLET>
         </FORM>
         </BODY>
    </HTML>MyApplet.java
    =========================================================================
    import netscape.javascript.*;
    public class MyApplet extends javax.swing.JApplet
         private JSObject m_win = null;
         private JSObject m_doc = null;
         public void init()
              getJSWin().call("ShowEmbd", null);
         private getJSDoc()
              if(m_doc == bull)
                   m_doc = (JSObject) getJSWin().getMember("document");
              return m_doc;
         private JSObject getJSWin()
              if (m_win == null)
                   m_win = netscape.javascript.JSObject.getWindow(this);
              return m_win;
    }The page was load and it should call the applet MyApplet. The MyApplet should do the init() method and call the Javascript "ShowEmbd()", BUT, instead of show alert from ShowEmbd(), the browser show the code of ShowEmbd() itself ...... It did not run the javascript and shows the alert ??
    The browser shows a message from status bar "The applet not initial" ???? why ???
    Can anyone help ?!

    On first look:
    I am not sure about the Object Tag, but the Applet Tag requires the MAYSCRIPT attribute before Java can call Javascript.

Maybe you are looking for