Java doesn't work with Windows 7. I have newest version of Java. I click on something that requires a Java script, and nothing happens.

I'm on a website. I click on a link, and nothing happens. In the lower corner of the browser, it says "Done" Internet Explorer works fine. Gasp!

To test if an add-on is causing the problem try running Firefox in [[safe mode|Firefox safe mode]], that will disable all add-ons. If it works in safe mode, follow the procedure in the [[Troubleshooting extensions and themes]] article to identify the culprit.
Another troubleshooting option is to create a new profile. Firefox stores user data in a profile, creating a new profile will show if the problem is in your profile. For details of how to do that see [http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows Creating a new Firefox profile on Windows - MozillaZine Knowledge Base].
If the new profile works, you can copy the files as shown in the "Copying files between profile folders" section of the [[Recovering important data from an old profile]] article. You will need to re-install any extensions.

Similar Messages

My i pod nano first generation doesn't work with windows 8

My i pod nano first generation doesn't work with windows 8

Howdy yvesmd,
Thanks for using the Apple Support Communities.
If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
Apple - Support - iPod - iPod nano Troubleshooting
Cheers,
Alex H.

AT-AO-10 doesn´t work with Windows 2000

I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
If the board is unplugged, error messages are the same.

Hello;
You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
Regards
Filipe A.
Applications Engineer
National Instruments

Will itunes 11 work with windows xp, I have ended up with this neqw version and it doesn't work , I can look at my library ,but not play and since synching my ipod it is now empty. Apple support is useless, they treat me like I'm on a Mac not a PC .

will itunes 11 work with windows xp , I have ended up with this new version after accepting an update and now although I can view my library I can't play anything and since synching my ipod it is empty. Apple support can't seem to get it's head around the fact I'm on a PC keeps asking for an apple serial number, Help!!!

Morning gedeye,
Thanks for using Apple Support Communities.
System Requirements
Windows XP Service Pack 2 or later
32-bit editions of Windows Vista or
32-bit editions of Windows 7, and Windows 8
For more information on this, take a look at this article:
http://support.apple.com/kb/DL1614
Best of luck,
Mario

Which MacPro doesn't work with Windows 7

One question for curiosity and one I need to act on:
I've got a MacPro 2x2.66 GHz Intel Xeon with 5GB Ram. Is there a way for me to tell whether I can run Windows7 in a BootCamp partiton? The documentation seems to indicate that "mid 2006" version of my machine will not run Windows 7 for some reason I don't understand.
http://support.apple.com/kb/HT3986
Mac Pro (Mid 2006, Intel Xeon Dual-core 2.66GHz or 3GHz)
Also, I've got an existing XP BootCamp install on one of my 500 GB hard drives on my MacPro desktop which I am accessing from the other 500 GB hard drive running OSX. I am using Parallels to do this but will boot directly into XP if the software requires it for performance.
Can anyone help me figure out if I should do a Windows 7 partition on my new MacBookPro or whether I should stick with Windows XP for this partition? I also plan on accessing it via Parallels on this machine and then booting directly into the Windows partition if the need arises. I believe I will be storing all my files on the OSX "side" of the hard drive.
I guess if I do the XP install I only have to keep track of one set of drivers? Any reason to do Windows 7 on the Laptop? Any suggestions on minimum size?
Thanks,
Jon

I guess I can do a Win7 install on the new MacBookPro but my MacPro circa 2007 is considered a "MacPro circa 2006" and won't do what I reasonably could have expected when I bought this machine in 2007 - which is run windows software with some reasonable level of similarity to any other computer that runs windows software...

Install disk doesn't work with Windows Vista

I just bought a new HP Color LaserJet Pro MFP M277dw and the install disk isn't compatible with Windows Vista. Apparently there's no ful feature option for Windows Vista on an HP laptop. After several hours of work I downloaded several drivers and got the printer to print, but the scan function doesn't work that well without the HP software which hasn't been created for Windows Vista.

I am having a very similar problem but do not have an answer either. I am running an X61 Type 7676A12 with a Lenovo ACP50 port replicator FRU part number 40Y8160. I am running Windows XP Pro. The port replicator has never been very great and would not restore the external monitor picture properly when the laptop had been in sleep mode however it was serviceable if not optimal. After downloading and installing the October MS security updates the machine would get a BSOD when the port replicator was plugged in. Remove the replicator and reboot and it worked ok. Plug it in again and BSOD. I tried upgrading the drivers from 5.1.4a to 7.1.1.03Aug07 and then to 7.1.2. No go. Emailing Targus with the problem got no response. The port replicator is now relegated to my junk heap of useless rubbish.

Flash Player doesn't work with Windows 8.1

Just purchased a new computer it has Windows 8.1 on it--Wanted to watch a You Tube video---and it said to update Flash Player--well It doesn't work at all. Nothing I can do to make it work---any ideas on how I can get this to work--or what ever it takes for videos, and graphics.
Sibyl

Hello @EssieScott,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your new HP computer running Windows 8.1 is not playing YouTube videos and are you are seeking assistance. I am providing you with a link to a Internet Explorer Forum post: Youtube videos in windows 8.1 will not play, which offers up solutions to resolve the issue you are describing. I recommend you review this thread and apply the steps suggested.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

VBS objshell.AppActivate doesn't work with Windows Task Scheduler

Hi all,
This script do the following :
Open Adobe Flash media Live Encoder with an encoding profile
Activate the Adobe Flash... Window
Send enter key to start encoding
Set objShell = WScript.CreateObject( "WScript.Shell" )
objShell.Run """C:\Program Files (x86)\Adobe\Flash Media Live Encoder 3.2\FlashMediaLiveEncoder.exe"" /p ""C:\Users\process\AppData\Roaming\Adobe\Flash Media Live Encoder 3.2\profile.xml"""
'Loading time
WScript.Sleep 5000
objshell.AppActivate ("Adobe Flash Media Live Encoder 3.2")
WScript.Sleep 5000
objShell.SendKeys "{ENTER}" 'start encoding
This script perfectly works manually, but the objshell.appactivate command doesn't work when i run it with the windows task Scheduler.
Any ideas ? Thx

Hi to all! I have found workaround for this issue - I wrote vbs, made run it via bat file, and converted the bat file to exe
vbs
Set oShell = CreateObject("WScript.Shell")
If oShell.AppActivate ("Connecting error to Bee") Then
WScript.Sleep 2000
oShell.SendKeys "%{F4}"
End If
bat
start C:\Users\User\Desktop\close.vbs
bat to exe
Advanced BAT to EXE Converter v2.83
I know it's some weird solution but it is working with Win Task Scheduler correctly. Try it ;)
In some cases you need to mark checkbox "run this program as an administrator" and (or not) disable UAC.

Fn + F6 to lock/unlock touchpad doesn't work with Windows 10

Hello,i have G580 i'v done an upgrade from 8.1 to windows 10so i'v have a small issue with touchpad :Fn+F6 to lock touchpad doesn't work when it was working as well in 8.1scrolling line at touchpad doesn't work to. so how to fix it, or will lenovo release drivers for windows 10 as she did for previous windowsis getting newer driver from elantech or synaptic website will resolve the problem ? cuz i did install 8.1 driver elantech and keyboard+mouse stopped working before reseting windows 10 upcoming driver. Best regards.

I have the same problem. Untilthey update the ELAN driver I go in to Settings, Devices, Mouse and Touchpad, Additional Mouse Options and disabel the ELAN driver. You can still turn it back on with Fn F6, but you have to go through the same steps again to turn it off. The nice thing is, it doesn't go back to enabled after awhile when you havent' been using the laptop.for awhile as it did before. The bad side is it takes about half a dozen key strokes to get to he disable. Hope this helps for now.

Media player hotkeys doesn't work with Windows Media Player 11

Hi;
I upgraded my windows media player 10 to 11 version. Now my hotkeys doesn't work. I was wondering if there is a way to solve this problem.

Hi
Do you mean the Toshiba Control buttons which control the WMP function like play, pause, stop, etc
On some Toshiba notebooks the Toshiba control buttons can be configured manually.
Please check this in the control panel -> Toshiba controls.
If you will be not successful I would recommend reinstalling the Toshiba utility again

Zen Sync Manager doesn't work with Windows 7

I have a Zen 6GB MP3 player, firmware version .2.03_0.03.0.
I recently upgraded my computer from Windows Vista to Windows 7. Sync Manager (looks like version 6.4.8.0, dated 7/7/2007) worked fine with Vista, and it even worked for a few days after I upgraded, but now it does not recognize that there is a player connected.
Zen Media Explorer still works, so I can drag and drop audio files to the Zen, but this is a bit of a pain. More importantly, I need to find a way to sync organizer (Outlook) data.
I have tried running Sync Manager in various compatibility modes (Vista, XP SP3, XP SP2), but it still will not recognize the player. From something I read in another post in this forum, I'm wondering if I need to uninstall Sync Manager and reinstall it in a compatibility mode? All my other applications work fine with Win 7, so I'm not that familiar with how to use compatibility mode properly.
Thanks!

I tried every which way to solve this problem, and in the end contacted Ctreati've tech support. They advised the following:
"Please be advised that, currently, we do not have Creative Media Explorer (Sync Manager) and firmware updates available for ZEN on Windows 7 OS.
Creative is working constantly on updates for Windows 7 users who are using Creative products. These updates will be deli'vered from time to time on our website. We encourage you to often visit our support site, http://support.creative.com/ and forum page, http://forums.creative.com/ for product updates and announcements."
Frustrating; it looks like a matter of waiting ...

HP Pavilion G6 1006sh external display doesn't work with Windows 8.1

Hi All,
After performing a clean install of Windows 8.1 Professional on my Pavilion G6 1006sh I can not use my external Samsung monitor connected on HDMI port.
The windows install went smoothly without any issues the OS had builtin drives for all of the devices. So there is no unknown hardware in device manager there is sound, wifi, LAN, etc. As for video card I can see two different devices. There is a Generic Windows VGA and there is an AMD Radeon HD 7400M installed. The AMD Catalyst software was installed successfully. In windows graphic properties I can choose from two different video outputs, one is the General Windows VGA the other one is the Radeon. However windows detects monitor connected only on General VGA (which is the inbuilt notebook display) and nothing on Radeon so I can not use my external monitor.
Of course I tried to restart laptop / monitor many times, unplug / plug HDMI cable but no success. When I plug HDMI cable into laptop the monitor displays a message that it is connected but there is no incoming signal. The HDMI port both on monitor and laptop is working I used the same configuration with Windows 7 x64 Professional without any issues. It is only the operating system that changed.
I tried to remove the General VGA device in order to force using Radeon but after restarting there was nothing displayed on the screen, I couldn't see anything neither on inbuilt nor on external monitor so I had to restore a previously saved system configuration.
I tired to install the latest graphic driver to Radeon downloaded from AMD site but Windows crashed and restarted during the install process.
Please help me with this issue or make a statement that this version of Windows is not supported on this machine so I have to revert the previous system.
Configuration:
modell: HP Pavilion G6 1006 SH
RAM: 2x4 GB
OS: Windows 8.1 Professional x64 (HUN)
OS drivers: installed and updated automatically by windows
Antivirus: Symantec Endpoint Protection 12.1
Thanks,
Zoltan
This question was solved.
View Solution.

Hi there @nzole
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you installed Windows 8.1 onto your system, but now you cannot detect an external monitor with HDMI. I am happy to help you with this.
First, in answer to your question, this model is not supported for windows 8.1. It was only sold in versions that were configured for Windows 7. That would mean there are no drivers specifically customized by HP for this model for Windows 8.1. It is possible you could find an appropriate drive from a model that does support Windows 8.1 that may be close enough in terms of hardware, that its driver could work, but there is no guarantee.
Here is the support page for your model: HP Pavilion g6-1006sh Notebook PC
HP Products - What If I Don't See My Operating System?
Do you still have the Recovery partitions, or did you make a set of recovery disks, prior to installing Windows 8.1?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

FIOS Email: Doesn't work with Windows Live Mail?

I have follow the instructions posted in mid April 2015 for changing the email settings and they do not work at all with Windows Live Mail.
Unable to send or receive messages for the Verizon (text deleted by me) account. An incorrect password was entered. The next time you send or receive messages, you'll be asked to enter your user name and password for this account.
Server Error: 0x800CCC90
Server Response: -ERR [AUTH] Authentication failed
Server: 'pop.verizon.net'
Windows Live Mail Error ID: 0x800CCC92
Protocol: POP3
Port: 995
Secure(SSL): Yes
I am using the exact same identical password I used successfully to access webmail. I confirmed the port settings of 995 (incoming) and 465 (outgoing) are being used in the set up. I noticed various versions of Outlook (Express, 2010, etc) have instructions posted here but not Windows Live Mail. Do the new settings not work on the client?

Update: I did find the instructions posted at http://www.verizon.com/Support/Residential/Announcements/general-announcements01.htm?CMP=EMC-CVZ_ZZ_... and they DO NOT WORK
Followed them to the letter step by step and still cannot access when using Webmail. Here is the response:
Unable to send or receive messages for the Verizon account. An incorrect password was entered. The next time you send or receive messages, you'll be asked to enter your user name and password for this account.
Server Error: 0x800CCC90
Server Response: -ERR [AUTH] Authentication failed
Server: 'incoming.verizon.net'
Windows Live Mail Error ID: 0x800CCC92
Protocol: POP3
Port: 995
Secure(SSL): Yes

Kuler API doesn't work with Windows 8 apps

Hi, I've been trying to get the Kuler API to work with my app for Windows 8 (I'm using C# and XAML). For example:
string feed = await client.GetStringAsync("https://kuler-api.adobe.com/rss/get.cfm?listType=" + type + "&itemsPerPage=" + items + "&timeSpan=" + timeSpan + "&key=" + key);
However this throws a Http Request Excepion and tells me: "The server committed a protocol violation. Section=ResponseHeader Detail=CR must be followed by LF".
This request worked absolutely fine a while ago but now it throws that exception. If I paste the url into a web browser like Chrome it works fine because Chrome ignores errors like this. Is there any way of fixing this problem? Thanks.
Edit: if the issue can't be resolved, can anyone give an update as to when the new API system is going to be in operation? I haven't heard anything since May and it's now July.

See:
*https://support.mozilla.org/kb/windows-media-or-other-plugins-stopped-working
There has been a change in where Firefox searches for plugins and the plugins folder in the Firefox program folder is no longer scanned for plugins, so Firefox won't find them anymore if they are installed in the plugins folder instead of the "browser\plugins" folder that Firefox now scans.
You can set the plugins.load_appdir_plugins pref to true on the about:config page to make Firefox scan the "<install>/plugins/" directory for plugins like the WMP plugin (np-mswmp.dll).
You can alternatively move plugins from "<install directory>\plugins\" to "<install directory>\browser\plugins\" (create this folder when missing) to make Firefox find them again.
*http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
*http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/

Applet doesn't work with Windows XP - Netscape 4.x

All - I have a Java web application which is supported for Windows 2000. Users are required to use Netscape 4.x. It uses a Swing JApplet. A plug-in is not required for Netscape, but there are some supporting JAR files installed on the client to enable the Swing components. It works fine on Windows 2K, but it breaks on Windows XP. More specifically, it throws an Exception:
java.lang.NoClassDefFoundError: com/sun/java/swing/Japplet
Does anybody have any thoughts as to why it works for Windows 2K but won't load the JApplet for Windows XP?
Thanks

Hi,
I'm assuming that if your users must use Netscape 4x, (without the plugin), then 1) they are using the built-in version of Java (1.1.5), and 2), the Java 1.1 swingall.jar file, is placed in the user's Netscape classes directory?
If that's true, then you probably want to make sure you are using the same version of the Java 1.1 swingall.jar on both the Windows 2000 and on the XP machines. When Sun was first working on Swing, each beta version had a different package placement for the swing classes. One version placed the classes in com.sun.java.swing, but the final version placed the classes in javax.swing.
The JApplet you are trying to use is still referring to the package name used in that beta version of Swing. If you try to download a current version of the Java 1.1 swing runtime, for installation on your XP machines, however, the swingall.jar will not have the classes in those locations.
--Steve

Java doesn't work with Windows 7. I have newest version of Java. I click on something that requires a Java script, and nothing happens.

Similar Messages

Maybe you are looking for