Java Exception problem

Hi,
i have a file called ConstructMap.java which declares 2 objects, first being a File object file and the second being a FeatureType object myFeatureTypeSchema. I also have another file called ConstructStyle.java. What i am doing is trying to pass these to parameters into my second file into a function called myCreateStyle() which accepts two param as File and FeatureType. The problem i'm getting is that when i run it i get the following exception:
java.lang.UnsupportedOperationException: Not supported yet.
at com.mycompany.Map_AppV2.ConstructStyle.myCreateStyle(ConstructSyle.java:167)
at com.mycompany.Map_AppV2.ConstructMap.<init>(ConstructMap.java:76)
at com.mycompany.Map_AppV2.MapApp.main(MapApp.java:41)
here are the code files:
ConstructMap.java
class ConstructMap implements MapContext 
ConstructMap( ) throws Exception
        ConstructStyle constrStyle = new ConstructStyle();
        File file = new File("C:/Cavendish_map_data/map_01_data.shp");
        FeatureType myFeatureTypeSchema = myFeatureSource.getSchema();
        // Pass file and feature schema referrence to myCreateStyle function
        constrStyle.myCreateStyle(file, myFeatureTypeSchema);
  // Functions for MapContext interface bellow
}ConstructStyle.java
class ConstructStyle implements StyleFactory
        ConstructStyle( )
  // Functions for StyleFactory interface
public Style myCreateStyle( File fi, FeatureType feat)
         throw new UnsupportedOperationException("Not supported yet.");
}When running it does say successful but it seems to always point to the line where i am passing the param to my second java class, how can i resolve so that it does not complain when i pass referrence to my other class? Hope that is clear.
Cheers

sesembeki wrote:
It is stupid answer "so wrong".
If you can do exactly, please don't say.First understand the problem, which arises out of allowing the IDE to autogenerate code without a clue as to what that code means. In this respect you are no better than the original poster, since you obviously don't understand it either.
Nobody is criticizing you for not knowing, only for posting garbage.
Recommended reading: The Java&#8482; Tutorials: Exceptions
db

Similar Messages

  • SocketPermission & Uncaught Java Exception Problems

    Hi,
    I'm trying to run a applet that uses BC4J.
    But I'm getting a SocketPermission - resolve-connect - problem.
    When I try to grant "connect-resolve" permissions using the DBMS_JAVA procedure,
    EXEC DBMS_JAVA.GRANT_PERMISSION('CONFIG','SYS:java.net.SocketPermision', '3.8.180.87', 'connect,resolve');
    I'm getting the following exception:
    ERROR at line 1:
    ORA-29532: Java call terminated by uncaught Java exception:
    java.lang.SecurityException: policy table update SYS:java.net.SocketPermision,
    3.8.180.87
    ORA-06512: at "SYS.DBMS_JAVA", line 0
    ORA-06512: at line 1
    BTW,
    Both the Web Server and the Oracle DB Server are in the same computer.
    I tried with both: SYSTEM and SYS users.
    "CONFIG" is a DB existent schema -user-
    "3.8.180.87" is the web & db server -I tried "*", too, but I got the same error-.
    Could some body help me, please?
    I think I'm doing the right steps -procedure.
    Thanks in advance,
    Agustin

    I'm in the process of publishing the following note (134280.1), titled "How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7".
    It will be accessible from Oracle Support's "Metalink" site.
    "How to Resolve ORA-29532 Java 2 Permission Problems in RDBMS 8.1.6 and 8.1.7".
    Problem Description
    Periodically an application running in the Enterprise Java Engine
    (EJE) formerly known as the "Oracle 8i JVM", "the JSERVER component", or
    the "Aurora JVM" will fail with a "java 2" permissions error having the
    following format :
    Note : Message shown below have been reformatted for easier readability.
    java.sql.SQLException: ORA-29532: Java call terminated by uncaught Java exception:
    usually followed by a detailed error message similar to one of the following
    messages :
    Example # 1
    java.security.AccessControlException: the Permission
    (java.net.SocketPermission hostname resolve)
    has not been granted by dbms_java.grant_permission to
    SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
    Example # 2
    java.security.AccessControlException: the Permission
    (java.util.PropertyPermission * read,write)
    has not been granted by dbms_java.grant_permission to
    SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
    Example # 3
    java.security.AccessControlException: the Permission
    (java.io.FilePermission \matt1.gif read)
    has not been granted by dbms_java.grant_permission to
    SchemaProtectionDomain(SCOTT|PolicyTableProxy(SCOTT))
    Explanation
    The java 2 permission stated in line # 2 of each of the above "Examples"
    has not been granted to the user specified in line 4 of the above "Examples".
    Solution Description
    The methodology to solve this issue is identical for all java 2 permissions
    cases.
    1) Format a call "dbms_java.grant_permission" procedure as described below.
    2) Logon as SYS or SYSTEM
    3) Issue the TWO commands shown below
    4) Logoff as SYS or SYSTEM
    5) Retry your application
    For Example # 1
    1) Logon as SYS or SYSTEM
    2) Issue the following commands :
    a) call dbms_java.grant_permission('SCOTT',
    'java.net.SocketPermission',
    'hostname',
    'resolve');
    b) commit;
    Note: Commit is mandatory !!
    3) Logoff as SYS or SYSTEM
    4) Retry your application
    For Example # 2
    1) Logon as SYS or SYSTEM
    2) Issue the following commands :
    a) call dbms_java.grant_permission('SCOTT',
    'java.util.PropertyPermission',
    'read,write');
    b) commit;
    Note: Commit is mandatory !!
    3) Logoff as SYS or SYSTEM
    4) Retry your application
    For Example # 3
    1) Logon as SYS or SYSTEM
    2) Issue the following commands :
    a) call dbms_java.grant_permission('SCOTT',
    'java.io.FilePermission',
    '\matt1.gif',
    'read');
    b) commit;
    Note: Commit is mandatory !!
    3) Logoff as SYS or SYSTEM
    4) Retry your application
    References
    For more details on java 2 permissions and security within the EJE, review
    Chapter 5, in the Java Developer's Guide. entitled,
    "Security For Oracle8i Java Applications"
    The RDBMS 8.1.7 version can be found at :
    http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/java.817/index.htm
    null

  • "ORA-29532: Java call terminated by uncaught Java exception

    Dear Oracle:
    I am trying to establish an HTTPS connection from a Java stored
    procedure that is wrapped in a PL/SQL procedure and loaded into a
    Package. We are running on Oracle 8.1.7.
    My Java code compiles and runs fine when run stand-alone outside
    Oracle; I can establish the connection to a secure server and talk to
    the server. However when I load this Java class (using the loadjava
    utility) this class can no longer run and I get a the following
    exception:
    "ORA-29532: Java call terminated by uncaught Java exception:
    javax.net.ssl.SSLException: SSL handshake failed:
    X509CertChainIncompleteErr"
    I have tried loading the JSSE from Sun and I still get the same error.
    Searching in the Discussing Forums I found the following link (which
    describes a procedure that logs into the UPS secure server site and
    grabs some XML) http://osi.oracle.com/~mbpierma/SSL_Java_DB.html .
    This code works ok if we try to connect to UPS server. However this
    code doesn't work if we try to log in to a different server (such as
    ???). If I modify this code slightly and try to log to any other
    sever server I get the same error as the one above. Investigation
    lead us to understand that the certificate at the UPS web site is a
    self-signed certificate -- not one generated by a major 'recognized'
    authority such as Verisign or Thawte.
    Further research pointed me to the following URL
    http://www.znow.com/sales/oracle/network.816/a76932/appf_ora.htm#619367
    This URL has the documentation for JAVA SSL for 8.1.6 which I figure
    I could read and try to make it work in 8.1.7.
    I looked at your Secure Hello World example, however the code is
    missing the most critical parts of the whole example, it does not
    specify where the certificate or any of the security settings come
    from (see the attached JavaCertExample.txt file).
    So, my questions are the following:
    1) What should I do to avoid the error mentioned above?
    2) Do you have a sample piece of code that describes how to make a
    HTTPS connection using a Java stored procedure?
    3) Can I make the HTTPS connection using a URL class and not using
    sockets directly?
    4) Do I need to load the JSEE provided by Sun?
    5) Will the solution be different for Oracle 9i?
    // SecureHelloClient.java
    import java.net.*;
    import java.io.*;
    import java.util.*;
    import javax.net.ssl.*;
    import javax.security.cert.X509Certificate;
    import oracle.security.ssl.OracleSSLCredential;
    import oracle.security.ssl.OracleSSLSocketFactory;
    import oracle.security.ssl.OracleSSLProtocolVersion;
    import oracle.security.ssl.OracleSSLSession;
    public class SecureHelloClient
    public static void main(String argv[])
    String hostName = "localhost";
    if(argv.length != 0)
    String hostName = argv[0];
    // Set the SSLSocketFactoryImpl class as follows:
    java.util.Properties prop = System.getProperties();
    prop.put("SSLSocketFactoryImplClass",
    "oracle.security.ssl.OracleSSLSocketFactoryImpl");
    try
    // Get the default socket factory
    OracleSSLSocketFactory sSocFactory
    = (OracleSSLSocketFactory)SSLSocketFactory.getDefault();
    sSocFactory.setSSLProtocolVersion(OracleSSLProtocolVersion.SSL_Version_3_0);
    OracleSSLCredential sslCredObj = new OracleSSLCredential();
    // Where did these values come from? caCert, userCert, trustedCert,
    // Set the certificate chain and private key if the
    // server requires client authentication
    sslCredObj.addCertChain(caCert)
    sslCredObj.addCertchain(userCert)
    sslCredObj.setPrivateKey(userPvtKey, userPassword)
    // Populate credential object
    sslCredObj.addTrustedCert(trustedCert);
    sSocFactory.setSSLCredentials(sslCredObj);
    // Create the socket using factory
    SSLSocket jsslSoc =
    (SSLSocket)sSocFactory.createSocket(hostName, 8443);
    String [] ciphers = jsslSoc.getSupportedCipherSuites() ;
    // Select the ciphers you want and put them.
    // Here we will put all availabel ciphers
    jsslSoc.setEnabledCipherSuites(ciphers);
    // We are creating socket in client mode
    jsslSoc.setUseClientMode(true);
    // Do SSL handshake
    jsslSoc.startHandshake();
    // Print negotiated cipher
    System.out.println("Negotiated Cipher Suite: "
    +jsslSoc.getSession().getCipherSuite());
    System.out.println("");
    X509Certificate[] peerCerts
    = ((javax.net.ssl.SSLSocket)jsslSoc).getSession().getPeerCertificateChain();
    if (peerCerts != null)
    System.out.println("Printing server information:");
    for(int i =0; i ? peerCerts.length; i++)
    System.out.println("Peer Certificate ["+i+"] Information:");
    System.out.println("- Subject: " + peerCerts.getSubjectDN().getName());
    System.out.println("- Issuer: " + peerCerts[i].getIssuerDN().getName());
    System.out.println("- Version: " + peerCerts[i].getVersion());
    System.out.println("- Start Time: " + peerCerts[i].getNotBefore().toString());
    System.out.println("- End Time: " + peerCerts[i].getNotAfter().toString());
    System.out.println("- Signature Algorithm: " + peerCerts[i].getSigAlgName());
    System.out.println("- Serial Number: " + peerCerts[i].getSerialNumber());
    else
    System.out.println("Failed to get peer certificates");
    // Now do data exchange with client
    OutputStream out = jsslSoc.getOutputStream();
    InputStream in = jsslSoc.getInputStream();
    String inputLine, outputLine;
    byte [] msg = new byte[1024];
    outputLine = "HELLO";
    out.write(outputLine.getBytes());
    int readLen = in.read(msg, 0, msg.length);
    if(readLen > 0)
    inputLine = new String(msg, 0, readLen);
    System.out.println("");
    System.out.println("Server Message:");
    System.out.println(inputLine );
    else
    System.out.println("Can't read data from client");
    // Close all sockets and streams
    out.close();
    in.close();
    jsslSoc.close();
    catch(SSLException e)
    System.out.println("SSL exception caught:");
    e.printStackTrace();
    catch(IOException e)
    System.out.println("IO exception caught:");
    e.printStackTrace();
    catch(Exception e)
    System.out.println("Exception caught:");
    e.printStackTrace();

    Hi,
    I have the same problem.
    Is some ORACLE guru that can help us ?
    We need to communicate with some servlet
    via POST method of https (SSL3)
    and with using private certificate on the client site.
    We need furthermore allow using of some proxy.
    Client site is realized as set of stored procedures within ORACLE 8.1.7
    In this time I am able to communicate with server without SSL and certificate
    using package utl_tcp
    (but with this solution without certificate is our customer not satisfied -:))
    ORACLE help us please !
    Pavel Pospisil
    [email protected]

  • FRM-92100 Java Exception (jacob)

    I'm using Jacob to load specific parts of Office documents into an Oracle database. This works successfully in 99.9% of cases although some users experience intermittent problems which can't be pinned down to a particilar office document and appear to be totally random. The error message indicates that the exception occurs when trying to close the Word session down.
    The error message is as follows:
    FRM-92100: Your connection to the Server was interrupted.
    Details:
    Java Exception:
    com.jacob.com.ComFailException: A COM exception has been encountered:
    At invoke of: Quit
    Description: Not enough storage is available to complete this operation.
    I have seen several references to the 92100 catch all error code but none that tie in with this description.
    Could anyone point me in the right direction as to what's causing this error? My first assumption would be the RAM available on the users PC at time of transfer but can't pin this down.
    Many thanks.

    I think that fix for bug 5375851 has resolved the problem mentioned and hence this shall be of help.
    Thanks,
    Message was edited by:
    user482823

  • Oracle BI 11.1.1.7.1: Calling BI webservices from Plsql Procedure: ORA-29532: Java call terminated by uncaught Java exception: java.lang.NoClassDefFoundError

    Hi,
         I have a requirement of calling BI webservices from Plsql stored procedure. I generated all my wsdl java classes and loaded them into the database. However, when I tried to call one of my java class using stored procedure, it is giving me"ORA-29532: Java call terminated by uncaught Java exception: java.lang.NoClassDefFoundError".
    *Cause:    A Java exception or error was signaled and could not be
               resolved by the Java code.
    *Action:   Modify Java code, if this behavior is not intended.
    But all my dependency classes are present in database as java class objects and are valid. Can some one help me out of this?

    Stiphane,
    You can look in USER_ERRORS to see if there's anything more specific reported by the compiler. But, it could also be the case that everything's OK (oddly enough). I loaded the JavaMail API in an 8.1.6 database and also got bytecode verifier errors, but it ran fine. Here are the errors I got when loading Sun's activation.jar, which ended up not being a problem:
    ORA-29552: verification warning: at offset 12 of <init> void (java.lang.String, java.lang.String) cannot access class$java$io$InputStream
    verifier is replacing bytecode at <init> void (java.lang.String, java.lang.String):12 by a throw at offset 18 of <init> void (java.lang.String, java.lang.String) cannot access class$java$io$InputStream
    verifier is replacing bytecode at <init> void (java.lang.String, java.lang.String):18 by a throw at offset 30 of <init> void (java.lang.String, java.lang.String) cannot access class$java$io$InputStream
    verifier is replacing bytecode at <init> void (java.lang.String, java.lang.String):30 by a throw
    Hope this helps,
    -Dan
    http://www.compuware.com/products/devpartner/db/oracle_debug.htm
    Debug PL/SQL and Java in the Oracle Database

  • Java Exception: java.lang.NoSuchMethodError -while accessing Job Code Table

    Recently we upgraded tools from 8.51.03 to 8.52.12
    when try to open data from below navigation.
    Set Up HRMS--> Foundation Tables--> Job Attributes---> Job Code Table
    then getting below error. Seriously doubt if a jar file is missing in PS_APP_HOME/class. Any clue?
    Java Exception: java.lang.NoSuchMethodError: PeopleSoft.PeopleCode.Func.CreateSQL(Ljava/lang/String;[Ljava/lang/Object;)LPeopleSoft/PeopleCode/SQL;: during call of com.peoplesoft.hr.hr.cache.MetaCatalog.getObjectCatalog. (2,763) HCMD_CORE.metadata.ObjectCatalog.OnExecute Name:getJavaObject PCPC:1099 Statement:19
    Called from:HCMD_CORE.metadata.ObjectCatalog.OnExecute Name:FindJavaObject Statement:177
    Called from:HCMD_CORE.metadata.ObjectCatalog.OnExecute Name:FindObject Statement:212
    Called from:WCS_SOURCE.Implementation.EmployeeInformationImpl.OnExecute Name:GetRecordField Statement:67
    Called from:WCS_SOURCE.Implementation.EmployeeInformationImpl.OnExecute Name:CreateCache Statement:26
    Called from:WCS_SOURCE.Impleme
    The noted Java error was thrown during a call of the given method.
    Error Codes
    Java Exception: java.lang.NoSuchMethodError: PeopleSoft.PeopleCode.Func.CreateSQL(Ljava/lang/String;[Ljava/lang/Object;)LPeopleSoft/PeopleCode/SQL;: during call of com.peoplesoft.hr.hr.cache.MetaCatalog.getObjectCatalog. (2,763)
    Problem Category/Subcategory                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Not sure about 8.52, but in 8.51, I found the PeopleSoft.PeopleCode.Func class in PS_HOME/appserv/classes/peoplecode.jar, and CLASSPATH gets set to PS_HOME/appserv/classes by psconfig.sh
    Not an answer, but it might give you some ideas on where to look.
    Regards,
    Bob

  • SMC on solaris 10 x86 - toolbox java exception

    Just installed (for the first time) solaris, to test it on a x86, had some difficulties with the NIC (realtek), but now seems ok.
    But I can't start sun managemnt console, keep getting the same error: can't open toolbox, and gives me a java exception.
    installed both jre 1.4.2 and jre 1.5.0.
    the exception is
    java.net.MalformedURLException: no protocol:
    any idea on the problem?
    Thank you in advance
    Stefano

    Thanks for your help.
    Yes, the browser starts, tells me to wait for the toolbox to load, and then stops.
    When i go to the message log there are always two error "toolbox not loaded" and the exception...
    I've just started with solaris, and I've no other machine to try to connect...
    I' ve tought of something about connection, even because of the problem with the card, but everithing else seems ok.
    How can I check for this?
    Thanks again.
    Stefano.

  • Error: ORA-29532: Java call terminated by uncaught Java exception:

    Anyone have this similar problem of
    ORA-29532: Java call terminated by uncaught Java exception:
    javax.xml.rpc.soap.SOAPFaultException: Caught exception while handling request:
    deserialization error: XML reader error: unexpected character content:
    "A"
    The service is running fine in a browser and returns the date. When I run it using the PL/SQL it has the error mentioned above.
    I am running the following:
    CREATE OR REPLACE FUNCTION GetDate_wb( p_dummy IN VARCHAR2 )
    RETURN DATE
    AS
    l_service sys.UTL_DBWS.service;
    l_call sys.UTL_DBWS.call;
    l_result ANYDATA;
    l_wsdl_url VARCHAR2(1024);
    l_service_name VARCHAR2(200);
    l_operation_name VARCHAR2(200);
    l_input_params sys.UTL_DBWS.anydata_list;
    l_port sys.UTL_DBWS.qname := 8988;
    BEGIN
    l_wsdl_url := 'http://org-lblakisa1:8988/BPEL_OD-LoginWS-context-root/getDate1SoapHttpPort?WSDL';
    l_service_name := 'getDate1';
    l_operation_name := 'getDate';
    l_service := sys.UTL_DBWS.create_service (
    wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
    service_name => l_service_name);
    l_call := sys.UTL_DBWS.create_call (
    service_handle => l_service,
    port_name => NULL,
    operation_name => l_operation_name);
    l_input_params(1) := ANYDATA.ConvertVarchar2(p_dummy);
    l_result := sys.UTL_DBWS.invoke (
    call_handle => l_call,
    input_params => l_input_params);
    sys.UTL_DBWS.release_call (call_handle => l_call);
    sys.UTL_DBWS.release_service (service_handle => l_service);
    RETURN ANYDATA.AccessDate(l_result);
    END;
    /

    Problem is resolved... We had a version issue in that 10.1.3 web service is not compatible. 10.1.2 worked.

  • Java Exception & error loading fmrweb.res

    I have installed Oracle9i Database and oracle 9i Forms on windows XP.
    When i try to run a form i get a java Exception
    MessageManager: key VERSION bundle oracle.forms.engine.RunformBundle exception java.lang.IllegalArgumentException: unknown format type at
    At the same time i get an error while opening the fmrweb.res file.
    I have seen some solutions to this problem, but I'm not sure i fully understand them. I hope somebody could help me.

    What is the error message, this looks like normal informational messages
    I have signed it sucessfully..Now i am getting the
    following in the java console
    Oracle JInitiator: Version 1.3.1.9
    Using JRE version 1.3.1.9 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and
    Settings\Aruns
    Proxy Configuration: Manual Configuration
    Proxy: proxy1.emirates.net.ae:8080
    Proxy Overrides: 172.16.*,<local>
    JAR cache enabled
    Location: C:\Documents and Settings\Aruns\Oracle
    racle Jar Cache
    Maximum size: 50 MB
    Compression level: 0
    c: clear console window
    f: finalize objects on finalization queue
    g: garbage collect
    h: display this help message
    l: dump classloader list
    m: print memory usage
    q: hide console
    s: dump system properties
    t: dump thread list
    x: clear classloader cache
    0-5: set trace level to <n>
    Loading
    http://hpc266:8888/forms90/java/f90all_jinit.jar from
    JAR cache
    Cached copy of
    http://hpc266:8888/forms90/java/webutil.jar is out of
    date
    Cached copy: Jul 4, 2005 8:50:04 AM
    Server copy: Jul 4, 2005 8:52:15 AM
    Downloading
    http://hpc266:8888/forms90/java/webutil.jar to JAR
    cache
    Cached copy of
    http://hpc266:8888/forms90/java/jacob.jar is out of
    date
    Cached copy: Jul 4, 2005 8:50:16 AM
    Server copy: Jul 4, 2005 8:51:59 AM
    Downloading http://hpc266:8888/forms90/java/jacob.jar
    to JAR cache
    connectMode=HTTP, native.
    Forms Applet version is : 90270
    Can anybody pls help me in this issue

  • LSOCP 200 Content Player Java Exception

    Dear Collegues,
    I am encountering an issue with the LSOCP 200.
    Our client's infrastructure as follows:
    SAP R/3 Enterprise 4.7 Ext 2.00
    LSO         200     0029     SAPK-200PTINLSO     LSO 200 (Learning Solution - Back End) I
    LSOFE     200     0027     SAPK-200PRINLSOFE     LSOFE 200 (Learning Solution - Front End
    SAP EP 6.0
    I have done all the required configuration in R/3 by pointing to the content server and pointing to the Content Player in the respective IMG Tasks.
    Now, when I log on as a learner and attempt to start a course, I receive a Java Exception:
    *Errors occurred
    Incomplete or incorrect data:
    com.sap.hcm.ls.lms.servlets.exceptions.InvalidArgumentException course update failed  :
         at com.sap.hcm.ls.lms.servlets.control.CourseUpdater.update(CourseUpdater.java:78)
         at com.sap.hcm.ls.lms.servlets.control.EventDispatcher.updateModels(EventDispatcher.java:116)
         at com.sap.hcm.ls.lms.servlets.control.RequestProcessor.doProcess(RequestProcessor.java:98)
         at com.sap.hcm.ls.lms.servlets.control.RequestProcessor.process(RequestProcessor.java:83)
         at com.sap.hcm.ls.lms.servlets.control.Mediator.processRequest(Mediator.java:221)
         at com.sap.hcm.ls.lms.servlets.control.Mediator.doGet(Mediator.java:150)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code))
         at java.security.AccessController.doPrivileged1(Native Method)
         at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code))
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))
    CAUSED BY: com.sap.hcm.ls.lms.courseengine.EngineException: failed to get macrostrategy with token=
         at com.sap.hcm.ls.lms.courseengine.steamengine.SteamEngine.getSteamMacroStrategyByToken(SteamEngine.java:180)
         at com.sap.hcm.ls.lms.courseengine.steamengine.SteamCourse.(SteamCourse.java:108)
         at com.sap.hcm.ls.lms.courseengine.steamengine.SteamEngine.loadCourse(SteamEngine.java:303)
         at com.sap.hcm.ls.lms.courseengine.steamengine.SteamEngine.loadCourse(SteamEngine.java:313)
         at com.sap.hcm.ls.lms.data.session.SessionFacade.loadCourse(SessionFacade.java:587)
         at com.sap.hcm.ls.lms.data.session.CourseStateUpdater.loadCourseFromPath(CourseStateUpdater.java:354)
         at com.sap.hcm.ls.lms.data.session.CourseStateUpdater.loadCourse(CourseStateUpdater.java:176)
         at com.sap.hcm.ls.lms.data.session.CourseStateUpdater.update(CourseStateUpdater.java:120)
         at com.sap.hcm.ls.lms.servlets.control.CourseUpdater.update(CourseUpdater.java:74)*
    The content plays on the local Content player on the desktop but the moment I attempt to play content with the server content player, this is what i get.
    Could you please let me know if you have come across this problem.
    Thanks and regards,
    Ronald Meyer

    Hi Abhiram,
    Please get in the IMG
    Training and Event Management -> SAP Learning Solution -> Learning Portal -> Select Learning Strategies
    Here you need to update your strategies defined.
    Regards,
    Jorge

  • FRM-92101 - java exception - unable to  communicate with runtime process

    We have a Forms application developed in Forms 10.1.2.0.2. One of our forms gives a unusual error. This error comes from any client machine we run the application.
    Our menu form (menu.fmb), in it's ON-LOGON trirgger, calls a form called login.fmb. Login has a canvas where username, pwd and db is specified with Login an Cancel buttons.
    Problem is with the EXIT_FORM build it. When the form tries to execute this built in we get the Dr. Watson type screen with 2 buttons (Details... and OK). The alert says
    FRM-92101: There was a failure in the Forms Server during startup. This could happen
    due to invalid configuration. Please look into the web-server log file for details.When we press the Details... button we get
    java exception
    oracle.forms.net.ConnectionException: Forms session <> aborted: unable to
    communicate with runtime processWe tried the "compile all" option as suggested by Note ID 444690.1 but no effect.
    This question's ( http://tiny.cc/fpcfmw ) answer suggests to update the hosts files but it is not clear as to which hosts file (client, application server) and what information to put there.
    Any help on this would be greatly appreciated.

    FRM-92101 means that the Forms runtime (frmweb.exe) crashed or could not be started. This has nothing to do with a network connection, unless your environment is configured with load balancing and session binding has not been enabled.
    Given that you are using 10.1.2.0, this could be a bug which likely was corrected in a newer version. If you have a MyOracleSupport account, I recommend you patch to 10.1.2.3 (Patch ID 5983622). After doing so, I would further recommend that you install the latest Forms Bundle patch on top of that, as it includes a few fixes which may be related to your problem. See patch ID 9593176 and Note 1188127.1

  • S Java Exception - Class Cast Exception

    When I go into my sms and mms inbox, as I click on one chat message thinger it shows the en thing in the top right, but it doesn't open, I have to click back then open it again and the message that person sent me doesn't show up. It's not happening with every chat, just the one, I've tried deleting it and starting a new one, but that didn't work, there seems to be nothing I can do with the Blackberry Desktop manager to fix it, so I turned to the internet, it appears no one else is having this problem, or they are and they just don't feel like posting about it.
    I also get an error in my log right after the S Java Exception - ClassCastException that reads S Java Exception - IllegalArgumentException
    Any ideas on the problem or any other information you need, I'll be checking this atleast every 8 hours from now till it's resolved. I hope someone knows something about it..

    That my friend is a Java error message.
    means something broke....
    But in all seriousness. It seems there was an application registry issue.
    Im guessing that you are on BES?
    see if this helps
    http://www.blackberry.com/btsc/KB17831
    If not, please provide more details (mainly what you were doing/trying to do when this happened)
    and your os version.
    thanks!
    1). Please thank those who help you by clicking the beside the 'Reply' button.
    2). If your issue has been solved, please resolve it by marking "Accept as Solution" on the correct post!
    3). Remember to have fun! We are all in this together!
    4). Follow me on

  • FRM-99999 java exception

    Hi OTN members,
    I tried to configure web application server 3 with oracle 8.0.4
    and developer server 2.1.
    When i try to open a form on the web.it gives me frm 99999 error
    which says java exception
    when details button is clicked it says unable to connect to
    server <ip address:8888> along with a list of stacked messages.
    Iam using winnt 4.0 with service pack 3
    Has any one ever faced this problem please let me know as this
    matter is most crucial to me.
    Thanks in advance
    Arun.C
    null

    Hi Arun !!
    This problem occurs when your Forms Server listner
    process is not started or it is running on some port which is
    different from the port specified in your htm file i.e. (value
    against serverPort.
    Try these steps.
    On command run prompt type
    <ORACLE_HOME>\bin\fin\f50srv32 port = port_number
    for example :
    type
    d:\orant\gin\f50srv32 port= 9000
    Any unused port can be specified.Port 9000 is the default port
    if not specified.
    After starting the form server listner process it is must to
    check whether it is actually started or not,as the case sometime
    it may happen that the port you specified may already be
    engaged.
    Go to Task Manager and look for process F50SRV32.EXE.
    Make sure that the port you had specified for form server
    listner process must be same as specified in your htm file's
    param name "serverPort" value .
    Navneet
    null

  • Java Exception Error

    I'm trying to configure my forms app to run on the web. So far
    I haven't had much luck. After the applet loads I keep getting a
    FRM-92090: An unexpected error occurred message. Details
    include...
    Java Exception:
    com.ms.security SecurityExceptionEx
    (oracle/forms/net/socketConnect.connect):cannot access "ADAS"|
    My htm code is:
    <head><title>Oracle Developer for the web</title></head>
    <body><br>Please wait while the forms client class files
    download and run.<br><p>
    <!--applet definition (start) -->
    <applet codebase="C:\oracle\ora82\FORMS60\java"
    code="oracle.forms.engine.Main"
    Height=600     
    width=600>
    <param name="serverPort" value="1521">
    <param name="serverHost" value="adas">
    <param name="connectMode" value="sockets">
    <param name="serverArgs"
    value="module=C:\ADAS\oracleforms\ADAS_MODULE.fmx">
    <param name="serverApp" value="default">
    </applet>
    <!--applet definition (end) -->
    </body>
    </html>
    Has anyone experienced similar problems? If so, is there a work
    around? Thanks for replying!
    Randy

    I'm trying to configure my forms app to run on the web. So far
    I haven't had much luck. After the applet loads I keep getting a
    FRM-92090: An unexpected error occurred message. Details
    include...
    Java Exception:
    com.ms.security SecurityExceptionEx
    (oracle/forms/net/socketConnect.connect):cannot access "ADAS"|
    My htm code is:
    <head><title>Oracle Developer for the web</title></head>
    <body><br>Please wait while the forms client class files
    download and run.<br><p>
    <!--applet definition (start) -->
    <applet codebase="C:\oracle\ora82\FORMS60\java"
    code="oracle.forms.engine.Main"
    Height=600
    width=600>
    <param name="serverPort" value="1521">
    <param name="serverHost" value="adas">
    <param name="connectMode" value="sockets">
    <param name="serverArgs"
    value="module=C:\ADAS\oracleforms\ADAS_MODULE.fmx">
    <param name="serverApp" value="default">
    </applet>
    <!--applet definition (end) -->
    </body>
    </html>
    Has anyone experienced similar problems? If so, is there a work
    around? Thanks for replying!

  • Uncaught java exception

    Hi, all,
    I recently installed Oracle8.1.7. I tried to create java in DBA STUDIO and got an error:
    VBO-1508: An error has occured and the server object could not be initialized. Please disconnect and try again.
    ORA-29532: Java call terminated by uncaught java exception: oracle.aurora.rdbms.ModifypermissionException: in [email protected]_available
    ORA-01031: insufficient privileges.
    I have ever deployed the java class to Oracle8.1.5 before and I could call the java using SQL statements. But after I installed 8.1.7, I can't deploy java to Oracle8.1.7 using either Jdeveloper and loadjava command.
    that error message is :
    oracle.jdeveloper.cm.CMException: Connection
    refused(DESCRIPTION=(TMP=)(VSNNUM=135294976)(ERR=12500)(ERROR_STACK=(ERROR=(CODE=12500)(EMFI=4))(ERROR=(CODE=12560)(EMFI=4))(ERROR=(CODE=530)(EMFI=4))(ERROR=(BUF=''))))
    at
    oracle.jdeveloper.cm.JdbcConnectionWrapper.createConnection(Compiled
    Code)
    at
    oracle.jdeveloper.cm.ConnectionWrapper.<init>(Compiled
    Code)
    Can someone tell me what's the problem?
    Thanks.
    Bing
    null

    Please post the details of the application release, database version and OS.
    Recently, there was a java upgrade in my system What is this upgrade? From what version to what version?
    What is your client OS/Browser?
    What is the Jinitiator version?
    and after that when i login to E-Biz suite, i get the following Jinitiator error and many Jinitiator windows open up with this error.
    Uncaught Java Exception while persisting the null bean
    Java.io.NotSerializableException:java.lang.thread
    at.java.io.ObjectOutputStream.outputObject(Compiled Code)
    at.java.io.ObjectOutputStream.writeObject(Compiled Code)
    at.java.io.ObjectOutputStream.defaultWriteObject(ObjectOutputStream.java:369)
    at.java.io.ObjectOutputStream.outputObject(Compiled Code)
    at.java.io.ObjectOutputStream.writeObject(Compiled Code)
    at sun.beans.ole.OleBeanInterface.saveBean(OleBeanInterface.java.508)It is very difficult to deal with many jinitiator error windows opening up.
    Could any one tell the reason for this issue and its resolution as well?Is the issue with all clients and all browsers?
    Have you tried to clear the jcache and the browser history files?
    Thanks,
    Hussein

Maybe you are looking for