Java_Home Could not Check
Dear All,
1) i have installed JDK version 1.4.2_10 , when i executed the Checklist i got an error Message
It is not recomended to user JDK version 1.4.2_10 Current Version : JAVA_HOME not available. See also SAP Note 867110.
Condition Result Code Severity
Java_HOME could not check HIGH
i have gone through the Note. and i have set the Environment Variable also.
2) When i am trying to install the Solution Manager 7.0. i am able to find the path by which i can install Centeral Instance.
Installation CD : 51033517_11
Please Guide the Process.
Regards
SNB
Hi,
As per your mail , the error is JAVA_HOME environmental is missed.
1. For Windows, You will set the following ENV variable.
JAVA_HOME = C:\java142 like this...
Right click on mycomputer>goto properties>click on Advanced>click on Environment variables> clieck on Add New option--> Then JAVA_HOME, after that give value = Java path.
For UNIX (Depending on your OS like AIX/HP/SOLARIS)
JAVA_HOME = /usr/tmp/java142 (this path is for example)
2. Use Installation Master CD/DVD, then click on sapinst.exe on windows based and Unix based you will have to give command ./sapinst
These are all depending on your OS level.
Regards,
Srini Nookala
Similar Messages
-
When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.
If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa
-
am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??
The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........ -
The workflow could not check out the list item.
Hi Guys,
I have a workflow enabled on document library and it needs to started manually.
Whenever user starts workflow manually, gets following error:
"the workflow could not check out the list item. Make sure the list item is not checked out." list item is not checked out & this workflow was working smoothly earlier.
OutCome: The workflow operation failed because the workflow lookup found no matching item.
I have gone through below links:
https://christopherclementen.wordpress.com/2014/05/23/oob-approval-workflow-error/
https://social.msdn.microsoft.com/Forums/office/en-US/f673d0f6-92eb-4057-95ff-ed3cb7790360/the-workflow-operation-failed-because-the-workflow-lookup-found-no-matching-item?forum=sharepointcustomizationprevious
Any clue on this?
Thanks, Nileshmaybe check out for editing documents setting is turned on so wokrflow needs doc to ce cheked out before proceding and user might not have permission to do that.
please refer below link:
http://sharepoint.stackexchange.com/questions/32399/workflow-error-the-workflow-could-not-update-the-item-possibly-because-one-or
http://community.office365.com/en-us/f/154/t/243062.aspx
http://stackoverflow.com/questions/1272957/document-checked-out-in-sharepoint-when-workflow-starts
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing -
I have ipad 3 iOS 7.1 last update when connect to my macbook osx 10.8.5 get the following error "iTunes could not check for an update to the carrier settings for your iPad A unkown error occurred 1651"
any help pleaseIf you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa
-
Hello,
this morning I received the following error message when the iPhone connected to iTunes: i
tunes could not check for an update to the carrier settings for your iphone. an unknown error occurred (1635)
any ideas? thxI get the same error (although in Dutch ;-)).
It also says something like (I'm translating): "Make sure your network settings are correct and your networkconnection is active or try again later." Is there a way to find out these "correct networksettings"?
I now get it for a week, eacht time I connect my iPhone to itunes... -
when I click on check for update I get error, iTunes could not check for an update to the carrier settings for your iPhone. an unknown error occurred 1630
Make sure your network setting are correct and your network connection is active or try again latter.update your itunes to 10.5.2 and error is not showing up anymore..
-
Have problem with "Check for Updates" for iTunes or accessing iTunes stores. Called Apple support locally in Singapore who couldnt help resolve the problem and was directed to helpdesk in Norway but after hours on the phone, they still could not solve the problem. They are also referring solutions from iTunes support FAQs to go through the problem I encountered. In the end, they said will escalate the matter to next level and will contact me back but they never did. Other error message include "A program caused iTunes to stop working..."
I am using a SONY Vaio with Windows 8. Current iTunes version is 11.1.3.8. Disappointed with Apple Support. I was able to do backup with itunes though. Appreciate anyone who encountered similar problem to share the solution. Thanks.I got the same error but I think I know what's wrong with my situation. My iPhone 4 is programmed for a CDMA carrier that Apple doesn't support. I have limited ability with the phone... but I still love it.
-
I restarted my computer but still have this issue.
I changed the setting from "install updates automatically" to "never check for updates". clicked ok and then changed back to "install updates automatically". Tried to check for updates and still receive the same error.
Windows defender was turned off. I turned it on updated it but still receive the same error message.
The background intelligent transfer service and windows update are set to "automatic delayed start" and the status for both is "started".
I'm running windows 7 home premium 64 bit
I ran the MGADIAG tool and here is the report (windows tab)
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-QCPVQ-KHRB8-RMV82
Windows Product Key Hash: +Rj3N34NLM2JqoBO/OzgzTZXgbY=
Windows Product ID: 00359-OEM-8992687-00095
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {22D605EF-8B21-4E2C-A111-AC15534A1805}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Home Premium
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130318-1533
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
Microsoft Office Project Professional 2007 - 100 Genuine
Microsoft Office Visio Professional 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{22D605EF-8B21-4E2C-A111-AC15534A1805}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010300.1.0.003</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-RMV82</PKey><PID>00359-OEM-8992687-00095</PID><PIDType>2</PIDType><SID>S-1-5-21-3546321622-335202686-625851561</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Inspiron 1545 </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A14</Version><SMBIOSVersion
major="2" minor="4"/><Date>20091207000000.000000+000</Date></BIOS><HWID>A27B3407018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern Standard
Time(GMT-05:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>WN09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>64BC76978749586</Val><Hash>GW6PzcEVEDTVKeO5Ym5UUm41dBk=</Hash><Pid>89388-707-0441865-65517</Pid><PidType>14</PidType></Product><Product
GUID="{90120000-003B-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Project Professional 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89403-707-4159871-63552</Pid><PidType>14</PidType></Product><Product
GUID="{90120000-0051-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft Office Visio Professional 2007</Name><Ver>12</Ver><Val>3AB862DE70D8D86</Val><Hash>UfpXsJvSSVcPufbDdjd0NK73+ug=</Hash><Pid>89405-707-4159871-63071</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12"
Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="3A" Version="12" Result="100"/><App
Id="44" Version="12" Result="100"/><App Id="53" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12"
Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, HomePremium edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800095-02-1033-7600.0000-3562012
Installation ID: 013283726900825816725312972325821572457642476266069113
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: RMV82
License Status: Licensed
Remaining Windows rearm count: 4
Trusted time: 2/27/2014 11:12:34 AM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
HealthStatus: 0x0000000000000000
Event Time Stamp: 12:25:2013 15:59
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: LgAAAAEAAQABAAIAAAABAAAAAgABAAEA6GFwuHZK2jMchnYOKB9UbZombj1Gyg==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC DELL WN09
FACP DELL WN09
HPET DELL WN09
MCFG DELL WN09
SLIC DELL WN09
SSDT PmRef CpuPm
I also ran the following commands in an elevated command prompt
NET START BITS
NET START WUAUSERV
SC QUERYEX BITS
SC QUERYEX WUAUSERV
Here is the result
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>NET START BITS
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>NET START WUAUSERV
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>SC QUERYEX BITS
SERVICE_NAME: BITS
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 400
FLAGS :
C:\Windows\system32>
C:\Windows\system32>SC QUERYEX WUAUSERV
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>NET START BITS
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>NET START WUAUSERV
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Windows\system32>SC QUERYEX BITS
SERVICE_NAME: BITS
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 400
FLAGS :
C:\Windows\system32>
C:\Windows\system32>SC QUERYEX WUAUSERV
SERVICE_NAME: WUAUSERV
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_PRESHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 400
FLAGS :
C:\Windows\system32>
I can't remember the last time updater worked correctly but it's been a really long time.
Thanks for any help you can provideHi,
Please try this
Stop Windows Update Service and BIT Service now.
Go to C:\Windows\SoftwareDistribution and delete all file under this folder.
Start Windows Update and BIT service now.
Then try to download windows update now.
If doesn't work, please reset the windows update componments
http://support.microsoft.com/kb/971058/en-us
Yolanda Zhu
TechNet Community Support -
Please help! Thanks!!!
Hello
Try this... I had the same problem and this worked for me.
Go to your system preferences → network → make sure WI-FI selected → advanced → DNS tab. Add 8.8.8.8 to the DNS servers. Go back to FaceTime and try to verify your account again.
Good luck! -
Manually entered packing instruction ID could not be checked
Dear JP,
When i use t-code: pop1, the system occurs this information: Manually entered packing instruction ID could not be checked.
Please tell me how i can solve this problem? The detail information as below,
Message no. VHU01116
Diagnosis
There is a number range object for the packing instruction ID. It is likely that the number ranges (intervals) for this number range object are wrongly defined, or not defined at all.
System Response
The system could not check the packing instruction ID.
Procedure
Check in Customizing (Handling Unit Management -> Automatic Packing -> Packing Instructions Master Data -> Define Number Ranges for Packing Instructions (or transaction OPIN) whether the following intervals are defined:
No. From No. To No. No. Level Ext
01 00000000000000000001 99999999999999999999 0
02 A ZZZZZZZZZZZZZZZZZZZZ XHello,
Try using tcode OVHU2. Here you can choose e.g. outbound delivery if you want to assign a procedure to outbound deliveries.
Refer following link for details on packing and it configuration.
Packing instruction determination
Thanks & Regards
JP -
Can't backup: "a session could not be started" -- can't unlock escrow bag
A few days ago my iPhone 3GS running iOS 4.0.1 stopped backing up. iTunes tells me that "a session could not be started with the iPhone." Running the iPhone Configuration Utility to view the iPhone log is only slightly more enlightening:
Mon Aug 9 10:42:19 Antons-iPhone /usr/libexec/BackupAgent2[1364] <Error>: Starting service with bag=c75bee579ba88d47e8f28bc1dae594914d15bc93
Mon Aug 9 10:42:19 Antons-iPhone /usr/libexec/BackupAgent2[1364] <Error>: Can't unlock escrow bag: -3
Mon Aug 9 10:42:19 Antons-iPhone /usr/libexec/BackupAgent2[1364] <Error>: securelockdowncheckin() failed.
Mon Aug 9 10:42:19 Antons-iPhone /usr/libexec/BackupAgent2[1364] <Error>: 1364:1047541704|DeviceLinkConnection.c:DLLockdownCheckin| ERROR: Could not check in with lockdown: 10
Mon Aug 9 10:42:19 Antons-iPhone BackupAgent2[1364] <Warning>: ERROR: Error opening connection: Error Domain=com.apple.MobileBackup.ErrorDomain Code=100 "Could not check-in with lockdown" UserInfo=0x113260 {NSLocalizedDescription=Could not check-in with lockdown}
If anyone knows how to fix this (other than just wait for iOS 4.1 or later), I’d appreciate it; running without backups worries me slightly, though I don’t have tons of data on the phone. (I’d rather try to avoid reloading it, since my son would be annoyed if I lost his Doodle Jump and Angry Birds scores!)So 4.0.2 came out and I couldn’t install it (from my laptop) because I couldn’t back up, so I got annoyed and figured out the solution.
First, delete your old backup. (You can do this manually from the ~/Library/Application Support/MobileSync/Backup directory, or you can do it from iTunes, I believe.) It’s probably best to keep a copy of this, just in case.
Remove all files from the two directories ~/Library/Lockdown and /var/db/lockdown . (Quit out of iTunes first.) The next backup should (hopefully) succeed. -
We are using RSC 3 to control RH7 projects. At the moment RSC says I have hundres of files checked out, but when I try to check them in it says they're not checked out. And then it says "No files were found to CheckIn." What could be causing this?
I tried refreshing and rebooting my (client) PC, and it didn't help.
Thanks.I am no pro at this product but when you look in source control, who does it say has those files checked out. Does that user match the credentials that you use to connect to source control. The only reason I ask this is, when I first set this up for my Publishers, I used the default admin account to connect to RSC. Then I created accounts for them and went to their workstations to change credentials. I changed the credentials but they had checked out some docs before that and could not check them back in because they were still checked out as admin. Had to change it back, have them check projects back in and then switch credentials. Hope this helps.
-
An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file. -
I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom
Maybe you are looking for
-
Regarding fetching data into internal table from D.B Tables, D.B View
Hi All, I Have following 5 tables in my Database. LTAP TABNAME FIELDNAME KEYFLAG LTAP MANDT X LTAP LGNUM X LTAP TANUM X LTAP TAPOS X LTAP VLPLA Z0MNH TABNAME FIELDNAME KEYFLAG Z0MNH MANDT X Z0MNH WERKS X Z0MNH ZMANNO X Z0MNH LGNUM X Z0MNH AENAM Z0MNH
-
Why can't I drag & drop photos to my email anymore?
The old IPhoto let me just drop and drag a photo onto the bottom part of my e-mail screen (gmail) and it would -boom- just upload as an attachment. I didn't have to open up the attachments folder finder and waste time. I updated my MacBook the othe
-
My itunes does not recognize my cd.(Pink-Funhouse)I am trying to rip it to add to my ipod but it says no cd in computer.Help
-
IPhoto 9.2.1 not importing photos from iPhone 4S
When I plug in my 4S, or an alternate 4S, iphoto will recognize that there are photos that need to be imported, however when I click import all, it inicates that it cannot read any of the files, and does not import any of the photos or videos. I have
-
A client of mine is looking to replace an old ISA based Multi-Channel Analyzer. We are looking for an MCA to use with optical particle counting. LabVIEW drivers would be a plus. I am leaning towards a PCI interface, but would consider others. So far