Java installed fine, but will not work.

Hello there! I am having an issue getting Java to work on my girlfriend's XP Pro PC.... The latest version installed great, and Java's install tester recognizes the install, but applets will not run... I've done everything I could find to do, which included uninstall/reinstall... I even uninstalled Microsoft VM (which didn't even show up as being on there, but it still uninstalled), REinstalled it, and then installed Java... I checked and rechecked all the settings I could find... and everything is set right... One suggestion was to check proxy settings, but everything seems to be cool there, too.. My PC and hers are hooked up through a router, and we both use ZoneAlarm pro, and all our settings are identical... All of our internet settings are the same as well, and the new Java works great on my PC... One note - and this is just a "by the way" - I've noticed that her computer has weird stuff like happen this from time to time, and I've always wondered if it's because we she upgraded to XP Pro from ME... I know, yikes!!! Ha! But anyway, I hope somebody can help.... I'm no developer, but I'm very experienced with a computer, and I know how to use regedit, etc., so any suggestions will be greatly appreciated! Meanwhile I'll try to search the forum for similar threads... Thanks in advance!

Unfortunately, this happens with all clutter-based applications (caribou, cheese, gnibbles, gnome-documents, sushi, quadrapassel, totem) on systems that no have hardware acceleration, and use software rasterizer.
Solutions, what I know:
1. Install the appropriate DRI driver, if available.
2. Rebuild packages without clutter, if possible.
3. Look for alternatives.
Any other solution?

Similar Messages

Facetime works fine on my iphone, but will not work on my MBA.

Facetime works fine on my iphone, but will not work on my MBA. Keeps telling me "unable to verify address" and says it is sending me a verification link to my email address but I never get anything. Crazy.
After a while it tells then me that it cannot verify my email address because of a network connection ("Could not verify the email address. Please check your network connection and try again. ")
Does anyone have any ideas?

Facetime works fine on my iphone, but will not work on my MBA. Keeps telling me "unable to verify address" and says it is sending me a verification link to my email address but I never get anything. Crazy.
After a while it tells then me that it cannot verify my email address because of a network connection ("Could not verify the email address. Please check your network connection and try again. ")
Does anyone have any ideas?

HT4995 My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

My iPad 2 Location Service works fine but does not work on my home Airport router. How can I fix the problem?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

I down loaded the new CS2 and it asking fir my new serial number which I put in but will not work what do I do?

loaded the new CS2 and it asking fir my new serial number which I put in but will not work what do I do?

Download the installer from Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Install and use the new serial number provided at the link above. Your existing serial number will no longer work.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!

There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.

PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.
I have an HP Desktop running XP Professional and tried Restore but it didn"t help. I was just going to uninstall and re-install but I can't get in to deactivate.

See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.

HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture.
Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?

As far as I know, you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

TS1389 Have my Mac configured it plays music fine but will not play films ???help

Have my Mac configured it plays music fine but will not play films ???help

This computer is not authorized to play film
If you purchased this content you can open I tunes and authorize this computer to play content.
But the Mac is already authorized !
Pass
Playing from I Tunes

My Keyboard and touch-pad will work during post, but will not work after the os loads?

I have a G60 and My Keyboard and touch-pad will work during post, but will not work after the os loads? Im running Windows 7, Anyone have any Ideas? I have already tried a hard reset, and safe mode???

Try pressing the fn key and f2 to reach bios
or
try a usb mouse from your desktop
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally

Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally.
It has only happened for the last month or so
Also, sometimes it drops out of apps, ie facebook etc. just like you have hit the stop button

Who replaced the battery? If it wasn't Apple the replacement is probably bad also. Either that, or the logic board is bad.

Flash player shows as installed but will not work and is not recognized by anything including adobe

I hve installed flash player(several times) and it will not work. programs using it tell me to install it...but it IS..I can see it in my programs list. I have tried ev everything in adobes suggestions. none work. I cannnot acess my Exfintiy or any games on Facebook. This stipid program has screwed up everything!! All of which worked last week!! How do I fix this?

What OS?
What browser?

Computer Recognizes iSight in System Profiler, but will not work

So I have a black MacBook and everything works fine except for the built-in iSight. I have tried reseting my computer and even did a factory restore, but to no avail. When I checked the system profiler, it recognizes my iSight. Here is what it says under the USB Device Tree:
Built-in iSight:
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.89
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Location ID: 0xfd400000
Current Available (mA): 500
Current Required (mA): 100
When I open iChat or PhotoBooth, the green camera comes on but it displays only black. Obviously the computer knows that I have an iSight camera, but it just will not work. Is there something I can do, or is my camera just broken? Please help me out.

jwellie wrote:
So I have a black MacBook and everything works fine except for the built-in iSight. I have tried reseting my computer and even did a factory restore, but to no avail. When I checked the system profiler, it recognizes my iSight. Here is what it says under the USB Device Tree:
Built-in iSight:
Product ID: 0x8501
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.89
Speed: Up to 480 Mb/sec
Manufacturer: Micron
Location ID: 0xfd400000
Current Available (mA): 500
Current Required (mA): 100
When I open iChat or PhotoBooth, the green camera comes on but it displays only black. Obviously the computer knows that I have an iSight camera, but it just will not work. Is there something I can do, or is my camera just broken? Please help me out.
So Welcome to Discussions, jwellie
(0) Have you tried all relevant suggestions from http://support.apple.com/kb/HT2090 ? Did you test iChat and Photo Booth in a new test user account? If you need help creating a test account, see this article:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
(1) You post that you "tried reseting my computer". If that means you doubt whether you properly reset your PMU (SMC) per this Apple article:
http://support.apple.com/kb/HT3964
print out the instructions appropriate to you model, study them carefully, and perform the reset again.
(2) Did you disconnect all AV devices (examples: eYeTV, iPods, scanners, etc.) before your tests? If you installed non-Apple software with any of those AV items, have you uninstalled the software IAW the supplier's instructions?
(3) When you did your "factory restore", did you zero (securely erase) your disk before installing the factory software? One zero write is sufficient to be certain there is nothing left on your startup disk that may be causing your problem. If you need help with the procedure, see:
http://docs.info.apple.com/article.html?path=DiskUtility/11.5/en/7090.html
Zeroing the disk will take a long time (hours, depending on the size of your drive), so plan some time.
(4) After zeroing the disk and a "factory restore", did you test iChat and Photo Booth before you added any non-Apple software items? This test will assure that you have not added some third-party item that is causing your problem.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

PSE 12 Bundled w/ Intuos 5 Tablet Downloads Fine But Will Not Launch From Intuos Site or Disc

I bought an Intuos 5 tablet last month. It came bundled with PSE 12. The tablet works excellant and I use it with CS6 100% of the time. I did not load PSE12 from the Intuos supplied PSE disc because I use CS6.
I have another computer that I use for photo editing and I loaded the Intuos onto it but since I don't have CS6 on it, I was going to load PSE12.
WRONG!!!!
PSE will not "Launch" via cd or Intuos website download of program.
I am running Windows XP(which is running CS6 fine), Win 7 on 2 other computers, 1 with CS6 and CS5, the other nothing...no photoediting sw at all. Hence adding PSE12.
I cannot get any phone or email support from Adobe on PSE12. Intuos engineers have no idea what is wrong either with their site download or cd version. But will not call Adobe for help.
Here are some of the errors.
After PSE is loaded and it asks "Do You Want To Launch?": I click ok and
It goes to a screen asking do I want to Uninstall PSE12?
If I go to the exe. file and click....I get numerous errors as follows:
Dan
Why won't post allow me to add "attachment"??

In the PSE 12 folder, double click on the Setup.exe
If you get this, just click on Ignore

My MacBook Pro will connect to WiFi but will not work in one location but will at others. I have the same issue with my IPhone 4S at the same location.

My MacBook Pro will connect to Wifi at one location (this is a secure location) but will not allow access to the internet. I will put in the password but will not display page. Other wifi capable devises do not have this issue but my Mac and my Iphone 4S will not work. I have tried restarting the router. All other wifi locations I have been to have not had this issue. Any suggestions? I am realtively new to Apple products (less than a year) so any advise is greatly appreciated.

The other devices that are working got on with the same password. It says it is connected. Just nothing works on the internet.

I fell in a lake with my I Phone in an Otter Box case, it work this morning but will not work now all I get is a white apple on the screen

I fell in a lke with my iphine in an Otter Box case yesterday it workied this morning but it will not work now all I get is a white apple on the screen when it is pluged in to computer

Yes, water and electronics do not mix. Water damage can get worse with time.
You should've left it to fully dry out in a bag of rice for a few days, and hope that the water hasn't corroded any of the electronics inside.

Java installed fine, but will not work.

Similar Messages

Maybe you are looking for