Java.io.IOException: Invalid identity certificate signature

Hi,
My WebLogic 11g is running on a Windows Server 2008 64 bit server. I have obtained a certificate with private key for this Windows server. Now I would like to use this certificate and private key for my WebLogic server.
What I have done:
1. Exported server certificate using mmc.exe to my_domain.pfx
2. Extracted my certificates and key with OpenSSL:
openssl pkcs12 -in my_domain.pfx -out tempcertfile.crt -nodes
3. Cut and pasted the section
-----BEGIN RSA PRIVATE KEY-----
(Block of Encrypted Text)
-----END RSA PRIVATE KEY-----
of the generated tempcertfile.crt to file my_domain.key
4. Copied the second set of -----BEGIN CERTIFICATE----- & -----END CERTIFICATE----- from tempcertfile.crt to file TrustedRoot.crt
5. Used keytool to create a new trust certificate keystore:
keytool -import -trustcacerts -file TrustedRoot.crt -alias server -keystore new_trust_keystore.jks -storepass NEWPASSWORD
where NEWPASSWORD is the new password of the keystore
6. Used utils.ImportPrivateKey to create a new identity certificate keystore:
java utils.ImportPrivateKey -keystore new_identity_keystore.jks -storepass NEWPASSWORD -storetype JKS -keypass NEWPASSWORD -alias server -certfile tempcertfile.crt
-keyfile my_domain.key -keyfilepass PFXPASSWORD
7. Configured WebLogic to use the new trust and identity certificate keystores
When I try to start the WebLogic server it shuts down again with the following log:
####<22-03-2012 07:10:42 CET> <Critical> <WebLogicServer> <HID-1041559> <AdminServer> <main> <<WLS Kernel>> <> <> <1332396642889> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
java.io.IOException: Invalid identity certificate signature: [***]
at weblogic.server.channels.DynamicSSLListenThread.<init>(DynamicSSLListenThread.java:64)
 at weblogic.server.channels.DynamicListenThreadManager.createListener(DynamicListenThreadManager.java:296)
 at weblogic.server.channels.AdminPortService.bindListeners(AdminPortService.java:76)
 at weblogic.server.channels.EnableAdminListenersService.start(EnableAdminListenersService.java:39)
 at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
 at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
 at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: weblogic.management.configuration.ConfigurationException: Invalid identity certificate signature: [***]
Does anybody know what I'm doing wrong?
Thanks in advance, Steffen

The solution is that the certificates in tempcertfile.crt must be in the correct order. The order must be:
Identity certificate
Intermediate certificate
Root certificate
The identity certificate can be located easily in tempcertfile.crt since there must be header that shows the identity--information such as the name of a person or an organization, their address, and so forth. The intermediate certificate will be the last certificate in the tempcertfile.crt.
After I changed the order of the certificates it worked fine.
Regards Steffen

Similar Messages

BEA-090156 Invalid identity certificate signature:

I have a pfx format certificate and private key for my weblogic 9.2 server. I followed all necessary steps of importing the private key and certificates into the correct keystores. But I got a "Invalid identity certificate signature" error when my weblogic server starts. I am able to import this pfx file into my Internet Explorer 6 and view its details. So how would I go about resolving this issue? Thanks.

If you want to use keytool to self sign the certificate then use the below command:
command to generate certificate:
keytool -genkey -alias pidcbox1 -keyalg RSA -keysize 1024 -keypass mykeypass -keystore pidcbox1identity.jks -storepass mystorepass
command to check the certificate:
keytool -list -v -keystore pidcbox1identity.jks -storepass mystorepass
command to self sign the certificate:
keytool -selfcert -v -alias pidcbox1 -keypass mykeypass -keystore pidcbox1identity.jks -storepass mystorepass -storetype jks
Thanks
Rahul Gupta

BEA-090156 Invalid identity certificate signature with custom stores

How does one go about resolving BEA-090156 <Invalid identity certificate signature> when using custom keystores. As I have DoD certificates with a root that isn't in the standard JDK keystore, how does one go about resolving this issue. I created the keystores with the DoD certs, but get this message when trying to use them. Pls advise.
Thanks.

The solution is that the certificates in tempcertfile.crt must be in the correct order. The order must be:
Identity certificate
Intermediate certificate
Root certificate
The identity certificate can be located easily in tempcertfile.crt since there must be header that shows the identity--information such as the name of a person or an organization, their address, and so forth. The intermediate certificate will be the last certificate in the tempcertfile.crt.
After I changed the order of the certificates it worked fine.
Regards Steffen

Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service. Can anyone please
help me.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service.
HI Arivazhagan K,
Could you give some explanation about what you modified? according the to error message, this is "resource is not found issue".
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SOAP: error occured: java.io.IOException: invalid content type for SOAP: TE

Hi,
We are implementing an XI scenario as follows: Mail Adapter->XI->SOAP Receiver.
Basically, we pass the XML File attachment from the Mail Adapter through XI to the SOAP Adapter. However, we keep getting the following error:
SOAP: error occured: java.io.IOException: invalid content type for SOAP: TEXT/HTML
Any ideas on where we could look to fix this problem?
Thanks,
EC

People,
most of errors like that are 401 (unauthorized), 403 (forbidden), 404 (not found) and so on. To be sure, check the message content that comes back from the webservice, in the Message Monitoring.
Obs: To visualize sync messages payload in Message Monitoring, you'll have to set the Messaging.syncMessageRemover.removebody parameter to false (default is true) in SAP XI AF Messaging service, in the Visual Administrator.
Regards,
Henrique.

Error in SOAP receiver channel: java.io.IOException: invalid http response:

Hi experts,
I have a IDOC to SOAP scenario where SOAP receiver channel is sending data to web service. In the receiver channel I am getting error as below. Kindly help me to resolve this issue. Thanks.
"Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null"

Did you check this?
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
Regards
Pothana

Java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 200 OK

hi all,
please help me to resolve the error. i am working on a proxy to soap scenario and in SXMB_moni i am getting the following error.
i had check my url,its working fine.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 200 OK</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>*
thanks
kasturika

Check this thread
Receiver SOAP Adapter Error: invalid content type for SOAP: TEXT/HTML
might give you some directions to look at.
Sameer

Reason Of Error java.io.IOException: invalid content type for SOAP: TEXT/HT

Hi All,
I am getting an error, when I am sending message from few BPM's to a common Webservice Synchronously.
Delivery of the message to the application using connection AFW failed, due to: java.io.IOException: invalid content type for SOAP: TEXT/HTML. Setting message to status failed.
Previously, it was working fine. But today I am getting the errors. Could any one please explain, what exactly the reason is. I searched the Forum, but didnt find a proper resolution. We are sending the same set of data to the Webservice, which we were sending before. Please suggest.
Regards,
Subhendu

Hi Vijay,
I am wondering,Without this module, how it was working fine for so many days. Could you please throw light?
Regards,
Subhendu

EROR: java.io.IOException: invalid content type for SOAP: TEXT/HTML

hi group,
my problem is related to scenario HTML to WebService in which im trying to send a request to a free webservice on internet and retrieving the response back and showing it in my html page.
scenario in detail:
i have a html page deployed on my tomcat server at my local m/c. in which im taking a email string and sending it to webservice which checks whether the email string has a valid email format or not and in response, webservice returns a boolean true/false depending on the email string. i want to show this boolean result n my html page.i have configured HTTP adaptor and SOAP adaptor for this and interfaces are scynchronus.
im able to send my request to webservice and getting the response also...i checked in trace..it shows message request sent and response recieved...here is the trace..
http://hcl3sap:50000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
but i get an error java.io.IOException: invalid content type for SOAP: TEXT/HTML after that,
Does anyone know where im going wrong....
regrds

you are very correct..i used SOAP reciever as http://www.webservicex.net/ValidateEmail.asmx?wsdl and SOAP Action as http://www.webservicex.net/IsValidEmail but getting the same error.
and if you look in the trace above it says that my request actually went to webservice and got a response also (response code 200) but i think after recieving the message from webservice something is wrong. either mapping is not correct...(but i tested that ..it works fine) or could be my company firewall is prohibiting the message sent by webservice to XI server (i have given proxy settings with password also)...im NOT sure on this ....
second thing i noticed in moni while examining the trace was....message payload under "Message Branch According to Receiver List " shows this value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:IsValidEmail xmlns:ns1="http://www.webservicex.net">
<ns1:Email>samWhgf.com</ns1:Email>
</ns1:IsValidEmail>
and then in just next step "Request Message Mapping" payload is
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:IsValidEmail xmlns:ns1="http://www.webservicex.net" />
i dont know really why payload is getting appended and if it is correct or not? but after this step further payload goes in this appended format only till call adaptor...if this is so i assume my message is going to webservice as
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:IsValidEmail xmlns:ns1="http://www.webservicex.net" />
which is not the proper format to be recieved by the webservice without any input value i.e "samWhgf.com"
im confused on this ..whether this is the route cause or any other...i have been trying to figure out the root cause from some days but still unsuccessful.
please provide ur valuable inputs.
regrds
Sameer

Java.io.IOException: Invalid keystore format

Getting this invalid keystore format when trying to enter a secure website that run java. Tried to re-install several times and several versions of JRE... NtWebTellerApplet.
This is running on a Vista Ultimate x64 with Q6600 and 8 gigs of RAM. Even tried to get the support on that site to remote help.. No luck in that either.
ava.io.IOException: Invalid keystore format
 at sun.security.provider.JavaKeyStore.engineLoad(Unknown Source)
 at sun.security.provider.JavaKeyStore$JKS.engineLoad(Unknown Source)
 at java.security.KeyStore.load(Unknown Source)
 at com.sun.deploy.security.DeploySigningCertStore$1.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sun.deploy.security.DeploySigningCertStore.loadCertStore(Unknown Source)
 at com.sun.deploy.security.DeploySigningCertStore.load(Unknown Source)
 at com.sun.deploy.security.DeploySigningCertStore.load(Unknown Source)
 at com.sun.deploy.security.ImmutableCertStore.load(Unknown Source)
 at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(Unknown Source)
 at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(Unknown Source)
 at sun.plugin.security.PluginClassLoader.getPermissions(Unknown Source)
 at java.security.SecureClassLoader.getProtectionDomain(Unknown Source)
 at java.security.SecureClassLoader.defineClass(Unknown Source)
 at java.net.URLClassLoader.defineClass(Unknown Source)
 at java.net.URLClassLoader.access$000(Unknown Source)
 at java.net.URLClassLoader$1.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.net.URLClassLoader.findClass(Unknown Source)
 at sun.applet.AppletClassLoader.findClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadCode(Unknown Source)
 at sun.applet.AppletPanel.createApplet(Unknown Source)
 at sun.plugin.AppletViewer.createApplet(Unknown Source)
 at sun.applet.AppletPanel.runLoader(Unknown Source)
 at sun.applet.AppletPanel.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)

I think that I am on to something. I deleted all the files in this directory:
C:\Users\<username>\AppData\LocalLow\Sun\Java\Deployment\security
This seems to resolve the problem with the invalid keystore (is a new one created?). Do not know yet if it has some unwanted side effects, but jeg jvm seems to start normally.

Error occured: java.io.IOException: invalid content type for SOAP:TEXT/HTML

Hie experts, i got a very confusing error that i still unable to solve. I've tried to read some of the threads in here but i already try most of them but still does not work..
Anyone know how to explain actually what happen with this error and how i can handle this??

Hi Made,
XI expects a HTTP 200 response from the Web service with a empty SOAP Payload when it uses the SOAP adapter to call a webservice asynchronously . Also you would need to change its functionality to send this HTTP 200 response with an empty payload back to XI.
Refer the SOAP adapter FAQ on service market place for more info on this .
Also one thing, the Asynch message will hit the webservice and the SOAP adapter may error out with a timeout error. If that is not an issue, then the scenario will continue to work.
Please also refer the following blogs:
/people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
Also check the proxy of your network.
find the details in IE -> tools -> internet options -> connections
regards,
Shibani
*Reward with points if helpful*

IOException: invalid content type for SOAP: TEXT/ using Sender SOAP adapter

Hi all,
When I am using Sender SOAP adapter, i am getting (MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System) exception.
From my RWB I can see:
2009-05-25 16:18:39 Information The message was successfully retrieved from the call queue.
2009-05-25 16:18:39 Information The message status was set to DLNG.
2009-05-25 16:18:39 Error Failed to parse the XI system response.
2009-05-25 16:18:39 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System.
2009-05-25 16:18:39 Error The message status was set to FAIL.
2009-05-25 16:18:39 Error Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML
Please help if possible! Thanks!
Mayank

Hi,
Check in SLD your integration engine business system have the following
pipeline url : http://server:httpport/sap/xi/engine?type=entry
check Http port also
After that go to TCODE - SXMB_ADM - integrationn engine configuration and check if your server is configured as HUB with the same url or not.
Thanks
Kasturika Phukan

SOAP: call failed: java.io.IOException

Hi gurus,
I was executing several stress-tests for an interface between to non-SAP systems over PI, that both use async SOAP adapter communication.
The requirement is to transfer up to 70mb files with single files. I executed the tests successfully with a 50MB message size and lower, and then I tried with a 70MB message, but the message failed and got this error in the adapter log:
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error
I believe this is coming from the adapter itself and not from the receiving system. I have checked the binary message data from the messaging system and it looks perfectly fine.
Any ideas why this is happening? Is there a limitation for message sizes with the SOAP adapter?
I also checked the messaging system configuration settings in the AS Java but could not find anythig related to the SOAP adapter.
Thanks in advance.
Regards,
S. Gökhan TOPÇ

Hi Gokhan,
I believe this is coming from the adapter itself and not from the receiving system. I have checked the binary message data from the messaging system and it looks perfectly fine.
I believe this is a client-side error, as your request was not properly addressed and the SOAP service was not reached.
Any ideas why this is happening? Is there a limitation for message sizes with the SOAP adapter?
Well, SAP's message size limit is huge but a lot depends on your receiving server's capabilities and network connections. So, you might not be able to reach the SAP's tested message size. In my project, I am able to do a max of 55 megs through SOAP.
Hope this helps.
regards,
Neetesh

IOException: invalid content type for SOAP: TEXT/HTML

Hi all,
After the IS received a SOAP request successfully and sent it to the Adapter Engine I get an IOException in my SOAP Adapter (I configured a SOAP communication channel). From my RWB I can see:
2005-08-12 10:53:17 Success SOAP: request message entering the adapter
2005-08-12 10:53:17 Success SOAP: completed the processing
2005-08-12 10:53:18 Success The message was successfully received by the messaging system. Profile: XI URL: http://ecsap:50000/MessagingSystem/receive/AFW/XI
2005-08-12 10:53:18 Success Using connection AFW. Trying to put the message into the receive queue.
2005-08-12 10:53:18 Success Message successfully put into the queue.
2005-08-12 10:53:18 Success The message was successfully retrieved from the receive queue.
2005-08-12 10:53:18 Success The message status set to DLNG.
2005-08-12 10:53:18 Success Delivering to channel: J2E_ReceiverChannel_SOAP
2005-08-12 10:53:18 Success SOAP: request message entering the adapter
2005-08-12 10:53:18 Error SOAP: error occured: java.io.IOException: invalid content type for SOAP: TEXT/HTML
2005-08-12 10:53:18 Error Exception caught by adapter framework: invalid content type for SOAP: TEXT/HTML
2005-08-12 10:53:18 Error Delivery of the message to the application using connection AFW failed, due to: invalid content type for SOAP: TEXT/HTML.
2005-08-12 10:53:18 Success The asynchronous message was successfully scheduled to be delivered at Fri Aug 12 10:58:18 CEST 2005.
2005-08-12 10:53:18 Success The message status set to WAIT.
Please help if possible! Thanks!
Denis

hi guys
this is my soap Reciever CC is showing the Error .
please suggest me the solution.
2007-12-21 10:09:27 Error SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML
2007-12-21 10:09:27 Error SOAP: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML: java.io.IOException: invalid content type for SOAP: TEXT/HTML
2007-12-21 10:09:27 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML: java.io.IOException: invalid content type for SOAP: TEXT/HTML
2007-12-21 10:09:27 Error Exception caught by adapter framework: invalid content type for SOAP: TEXT/HTML
2007-12-21 10:09:27 Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML: java.io.IOException: invalid content type for SOAP: TEXT/HTML. Setting message to status failed.
2007-12-21 10:09:27 Error The message status set to FAIL.
2007-12-21 10:09:27 Error Returning synchronous error message to calling application: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML: java.io.IOException: invalid content type for SOAP: TEXT/HTML.
thanks & Regards
Ravi

Ava.io.IOException: Invalid keystore format

Hi;
I am getting the following error while launching my applet through browser.
I have modified my java version from 1.4.2_08 to 1.5.0.10.
java.io.IOException: Invalid keystore format
 at sun.security.provider.JavaKeyStore.engineLoad(Unknown Source)
 at java.security.KeyStore.load(Unknown Source)
 at com.sun.deploy.security.DeploySigningCertStore$1.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sun.deploy.security.DeploySigningCertStore.load(Unknown Source)
 at com.sun.deploy.security.DeploySigningCertStore.load(Unknown Source)
 at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(Unknown Source)
 at com.sun.deploy.security.TrustDecider.isAllPermissionGranted(Unknown Source)
 at sun.plugin.security.PluginClassLoader.getPermissions(Unknown Source)
 at java.security.SecureClassLoader.getProtectionDomain(Unknown Source)
 at java.security.SecureClassLoader.defineClass(Unknown Source)
 at java.net.URLClassLoader.defineClass(Unknown Source)
 at java.net.URLClassLoader.access$100(Unknown Source)
 at java.net.URLClassLoader$1.run(Unknown Source)
 at java.security.AccessController.doPrivileged(Native Method)
 at java.net.URLClassLoader.findClass(Unknown Source)
 at sun.applet.AppletClassLoader.findClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadCode(Unknown Source)
 at sun.applet.AppletPanel.createApplet(Unknown Source)
 at sun.plugin.AppletViewer.createApplet(Unknown Source)
 at sun.applet.AppletPanel.runLoader(Unknown Source)
 at sun.applet.AppletPanel.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)Please help me.what should be a problem for that.

I think that I am on to something. I deleted all the files in this directory:
C:\Users\<username>\AppData\LocalLow\Sun\Java\Deployment\security
This seems to resolve the problem with the invalid keystore (is a new one created?). Do not know yet if it has some unwanted side effects, but jeg jvm seems to start normally.

Java.io.IOException: Invalid identity certificate signature

Similar Messages

Maybe you are looking for