Java is giving error messages declaring the fault is my 32-bit browser... help me Firefox!

Cannot run even old applets anymore without fixing Java. I get an error message stating the issue is my browser is 32-bit while I'm running 64-bit Java. I use 64-bit for other programs and frequently re-installing just for Firefox is not a reasonable option. Please provide new releases, I've seen posts related to this dating back almost a year. Thanks much.

Hi ejspina
First uninstall the 64-bit java for firefox : [http://www.java.com/en/download/uninstall.jsp How do I uninstall Java on my Windows computer ?]
then download and install the 32-bit for firefox : [http://www.java.com/en/download/manual.jsp Java Downloads for All Operating Systems]
thank you

Similar Messages

I redeemed a Starbucks gift card for a song --You Found Another Love -- but when I went to play it, I received an error message that the file couldn't be found. Help

I am having a problem getting my Starbucks song to play. I redeemed it in the iTunes store. The song -- You Found Another Love -- shows up in my playlist, but it is not playable because I get an error message that says: File not found.
Anyone have this problem?

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Error message says"the document Web could not be saved" help Please

After spending hours on the final tweeking of my iWeb site I go to publish it and get the message the document could not be saved. Is there anyone out there knows how to get this program to save I have tried everything and nothing. And as luck would have it I didn't keep a back copy of what I put into iWeb. Please help
thanks Jeff

Well I encountered the same problem and I had to quit and lose the changes but there is a way to save the information.
What you should do is first back up the domain file.
then before you quit and lose the changes, PRINT the pages as a PDF that way you save the information.
Then I reopened and started to match the pages in iWeb to the PDF's
Though I found out that when I copied some text into a Podcast page filler text from one of the PDF's it caused the same error.
So to get that piece to work, I deleted the text box and retyped that part and Presto!

20Gb 4th Gen w/ every error message in the book..Apple Support doesn't help

I have done all of the steps included in the help articles (ie: updated iTunes, iPod updater, restarted my computer, changed usb ports, toggled hold switch, reset with menu-select, tried reset with menu-select then select play for a hard reset to disk mode, tried connecting iPod to a Mac). Nothing helps my problem. I have a 4th generation which is displaying a combination of the "plug iPod into AC adapter", "sad iPod", "fully discharged iPod", "Alert folder" and "Apple" logos. Neither "my computer" nor iTunes recognizes my iPod, and my iPod does not display a menu. Device manager doesn't recognize it and iPod updater will not even recognize my iPod.

I plugged it into my wife's G4 iBook with USB 2.0, and it still showed the picture described above.
Plug it into the iBook G4 with FireWire, or an unit such as the iPod Hi-Fi, or try this method, or take it to an Apple Store.
(30435)

I have Pages 09 but it will not save a document. I have tried clicking on all the options but I keep getting an error message that the document cannot be saved. Any help?

I have Pages 09, but it will not save a document. I have clicked on all options, but I cannot save anything. Any thoughts?

Hi lv,
This may help. File > Export > PDF or Word or RTF.
At least that will save your work.
Regards,
Ian.

Trying to download iTunes 11.1 but it keeps giving me an error message saying: The feature you are trying to use is on a network resource that is unavailable.

Trying to download iTunes 11.1 but it keeps giving me an error message saying:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "iTunes64.msi" in the box below.
Use Source:

iTunes.msi
Perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

When deploying the webdynpro java application , showing error message

Hi Masters,
when deploying the webdynpro java application , showing error message. Please reply why this problem showing and what is the solution
But Iogin to sdm tool ( remote gui .sh) with same password, which password i am using for deploy the webdynpro java application.here in sdm tool i am able to login. and i restart the sdm , and again trying to deploy the same problem it showing.
URL to deploy : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Aborted: development component 'sales'/'rupa.com'/'LOKAL'/'0.2010.02.13.14.32.39':Caught exception during application deployment from SAP J2EE Engine's deploy API:com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [devsap] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment exception : The deployment of at least one item aborted
Edited by: sujana mullapudi on Feb 13, 2010 2:52 PM

Hi Sujana,
For deploying Web Dynpro for Java application, J2EE_admin correct password must be stored in the scured area of config tool.
Your error show that J2EE_admin information is not correct.
So, Please ask your basis team to update new J2EE_ADMIN password or you can do it in scured area of config tool.
Hope this will helps you.
Thanks
Arun Jaiswal

Giving error message when saving the Query

Hello,
I have added a new calculated key figure to the structure in a Query but when I try to save the Query it is giving error message is below.
Error Message:
u201CThis internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572u201D.
Could any one please suggest me how can I over come with this problem.
Thanks
Prathap.

Hi Prathap,
There is some problem in the definition of the Query.
Please click on the check button before saving the query, it gives where the problem exists in it.
Hope it helps.
Veeerendra.

Java - Axis2: How to get an error code / error message from the Javascript via SOAP

Hi
In our Java applicsation we call a Javascript in a Indesign CS Server using the following code:
--- SNIP BEGIN ---
// calls the remote service on the indesign server
try {
// create service
ServiceStub oIndsgnSrvStub = new
ServiceStub(sIndesignServer);
// create service parameter
ServiceStub.RunScriptParameters
oIndsgnSrvRSParams = new ServiceStub.RunScriptParameters();
// create arguments with source- and target-file for parameter
ServiceStub.IDSPScriptArg[] oIndsgnSrvSArgs = new ServiceStub.IDSPScriptArg[2];
oIndsgnSrvSArgs[0] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[0].setName("xml-input");
oIndsgnSrvSArgs[0].setValue(sSourceFile);
oIndsgnSrvSArgs[1] = new
ServiceStub.IDSPScriptArg();
oIndsgnSrvSArgs[1].setName("output-file");
oIndsgnSrvSArgs[1].setValue(sTargetFile);
// define service parameter
oIndsgnSrvRSParams.setScriptArgs(oIndsgnSrvSArgs);
oIndsgnSrvRSParams.setScriptFile(sScriptFile);
oIndsgnSrvRSParams.setScriptLanguage("javascript");
oIndsgnSrvRSParams.setScriptText("");
// create runscript
ServiceStub.RunScript oIndsgnSrvRS = new ServiceStub.RunScript();
// set parameter
oIndsgnSrvRS.setRunScriptParameters(oIndsgnSrvRSParams);
//$$$ there should be an answer returned by the InddSrvr
// execute SOAP call
ServiceStub.RunScriptResult oIndsgnSrvRes = oIndsgnSrvStub.RunScript(oIndsgnSrvRS);
if(oIndsgnSrvRes.getErrorNumber() == 0) {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_SUCCESS);
bOK = true;
} else {
oServerProdJob.setProdState(CBP_Constant.REMOTEPRODUCTIONSTATE_FAILURE);
bOK = false;
//$$$ should be set, if there is something returned by inddsrvr
//oServerProdJob.setErrorMsg(sErrorMsg);
} catch(Exception e) {
sError += e.getMessage() + "\n";
bOK = false;
--- SNIP END -----
The problem is that we don't get the error code and/or the error message from the Javascript in oIndsgnSrvRes. The error code is always 0 if I set an Integer value as return in the Javascript. If I set a String, there is an Exception in the Java application.
Here is the Java script we use:
--- SNIP BEGIN ---
main();
main()
var sError = "";
var sXMLInput = "";
var sLayoutPath = "";
// get the SDKCodeSnippetRunner object
var cbpAdapter = app.cbpCbpadapterObject
if (cbpAdapter) {
sXMLInput=app.scriptArgs.get("xml-input");
sLayoutOutputFile=app.scriptArgs.get("output-file");
sError = cbpAdapter.doProcess(sXMLInput, sLayoutOutputFile);
return sError; // This give an Exception; if I return an Integer the ScriptResult is always 0
--- SNIP END -----
If I try this with the test application from Adobe I get the error code correctly. But in the Java application, using SOAP, I can't get the error code.
What could be wrong?
Any ideas?
Thanks a lot for the support.
Kind regards
Hans

user11340104 wrote:
Hello -
i am calling sqlplus from a bash shell script. If the sql statement generates an error, how can I return that error code (unsuccessful) back to the bash shell?
Well, let google be your friend,
http://www.google.co.in/search?rlz=1C1GGLS_enIN327IN327&sourceid=chrome&ie=UTF-8&q=sqlplus+error+codes
There are many threads I guess talking about the same issue.
HTH
Aman....

Am trying to install the mas os yosemite and its giving me an error message that "The Install OS X Yosemite application can't be used from this disk". What is the problem?

Am trying to install the mac os yosemite and its giving me an error message that "The Install OS X Yosemite application can't be used from this disk". What is the problem?

Impossible to answer with information provided

When the Table :" J_2IRG1BAL , " is giving error message SV023

Dear Sir/Madam,
When going to enter data in the table J_2IRG1BAL, it is giving error message as "create data processing function module SV023 in ABAP client in Dev. Server. Though it is alowing other tables to edit as usual.
Pls. advice.
Thanks,
Pranab
Edited by: Pranab Das on Jul 23, 2009 8:09 AM

Can you please check 'any authorization error' on your name. you can check in su53 transaction code.
regards
nag

HipServ for STORA gives error Message that the Java plugin requires a newer version than 3.0. I have installed 4.0, so how come?

HipServ for STORA by Netgear: when I start it there is an error message "The new JAVA plugin requires a Foxfire version 3 or later". the version of Foxfire I have installed is 4.0. I delete the error message and the HipServ program goes on and works perfectly. To whom should I direct my question, which is how to get rid of the error message? I can't seem to find any new driver for the STORA backup device (RAID 1 pair of 1 tByte drives on LAN)

Hi rctbone,
The problem is not with Firefox, but with the Java update. A solution can be found here: http://forum1.netgear.com/showthread.php?t=59935&highlight=java+plugin
Cheers,
Roby!

Error message in the loop statement

Hi Experts:
                In my ABAP program,
                In the loop of internal table,when match some condition,the system give error message, or go on.
                Now,if the internal table has ten records, three records match some condition,the others need
                       process going on.
                But in my program,if finds error record,giving error message,can't process other records.
                I want it can not only show error message,but also process other records.
                Pls give me some advice,tks!

Hi,
Message type E is error type and it will terminate your program.
So either we can declare the message type E as information message or status or we can add a varaible flag which can be set on error.
So that it would not terminate the program.
Example :
Loop at inttable1.
if condition for error
flag = 'X'.
continue.
endif.
endloop.
Outside the loop.
if flag = 'X'.
message in other internal table with details.
endif
Hope this helps.
Thanks,

FM SSF_CLOSE failing and giving error message while printing a smartform

Hi,
for language spanish the smartform is not getting printed for output type SG11 but for english it is getting printed? What could be the reason? I debugged and found that SSF_CLOSE is failing and giving error message.
Thanks and regards,
AP.

Hi Aparajita,
for changing from one languages to another translations in SE63 is to be done, either search on SCN for using SE63 , or atleast see these wiki help .
Transaction SE63 - Translation Tools for Translators (BC-DOC-TTL) - SAP Library
Transaction SE63 (SAP Library - Translation Tools for Translators (BC-DOC-TTL))

How to display the error message during the web dynpro application runtime

hi,
    I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
    But when i do the same on server-2,there just show something like:
            500   Internal Server Error
                                SAP NetWeaver Application Server 7.00/Java AS 7.00
            Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

The Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

Java is giving error messages declaring the fault is my 32-bit browser... help me Firefox!

Similar Messages

Maybe you are looking for