Java is not starting up after upgradation in dual stack system

Hi,
We have sucessfully upgraded xi(netweaver2004s) to EHP1, after upgradation server0 is not starting.
default trace file in server0 shows the following error
Core service com.sap.security.core.ume.service failed .J2EE Engine cannot be started
But abap engine is running sucessfully.
We have sucessfully completed EHP 1 installation

Hi Venkat,
As per the log it seems that ume services are not started as a result java engine is not starting..
Please also check the secure store settings that all passwords are correct there ...
Please go thorugh below link:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/20/361941edd5ef23e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/64/351941edd5ef23e10000000a155106/frameset.htm
Thanks
Sunny

Similar Messages

IPhoto does not start up after upgrading

On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
What can cause this problem?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Wcs not starting up after upgrade

I recently upgraded the cisco wcs software from 5.0.56.2 to 5.2.148 in order to eventually upgrade it to the latest version 7.0, after installing the software it fails to start WCS, i rebooted the server already and restarted the services i ran dbadmin checkschema and it completed fine but when it just hangs when starting wcs
here is what i get
Starting Health Monitor as a primary
Checking for Port 8082 availability... OK
Starting Health Montior Web Server...
Health Monitor Web Server Started.
Starting Health Monitor Server...
Health Monitor Server Started.
Starting WCS Server
Port 69 is in use. DatagramSocket binding gave exception java.net.BindException: Address already in use: Cannot bind
Port 69 needed by the server is being used by some other application.
Please free the port and restart the Server.
Failed to start WCS server. Check launchout.txt for details.
Log files are located under webnms\logs in the WCS install directory.
Checking for Port 21 availability... OK
Checking for Port 8456 availability... OK
Checking for Port 8457 availability... OK
Checking for Port 1299 availability... OK
Checking for local Port 1299 availability... OK
Checking for Port 6789 availability... OK
Checking for local Port 6789 availability... OK
Checking for UDP Port 69 availability...
anyone have any idea whats going on

just a thought i see that it doesn't actually remove verison 5.0.56.2 when i installed version 5.2.148 and im wondering if this isn't causing some issues with WCS not starting
here is my wcs status window
Health Monitor is running with an error.
WCS is stopped.
Database server is running
Apache server is running
but if i start wcs from programs it tells me health monitor is already running.
i created a backup of wcs using the backup feature and saved it so im not sure if i should just uninstall and reinstall at this point and see what happens or not

Itunes does not start anymore after upgrade to 6.05.20

I upgraded itunes to the current version and after that itunes does not start anymore. I scanned for virus with an up-to-date scanner, scanned for adware with Windows defender and ewido and used the tips from http://docs.info.apple.com/article.html?artnum=42963
I run itunes on Windows Server 2003 which worked fine for three years. I know it is officially supported on XP only.
I deinstalled itunes and reinstalled afterwards no change. The windows event log shows some erors
Faulting application iTunes.exe, version 6.0.5.20, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84.
Any other idea?
Thanks
Christoph

ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

Macbook does not start anymore after upgrade to Snow Leopard

I successfully upgraded my MacbookAir to Snow Leopard, but my son's Macbook refuses to start after having been upgraded.
Please help!

Hello,
my MacBook Pro (late 2008 unibody) just needs a main logicboard replacement, fortunatly still within warrenty, after updating to 10.6.0. I experienced the following: With an update from 10.5.6 to 10.5.7 the MBP freezed within 10min. after reboot, with every restart it freezed after a shorter period and finally freezed during the boot process. I've mounted the MBP as an external HD to my iMac, did an backup and deleted the internal MBP harddrive by overwriting it with zeros. I did the usual procedure of resetting SMC, P/V-RAM and reinstalled 10.5.6 - everything was fine again!
When Snow Leopard came out, I updated again, hoping the issue has been repaired. BUT I experienced the same problems and with some system permission deleting I got SL running as long as I did not turn on AirPort. As soon airport is activated and an internet connection is established I could count the seconds until the mac freezes. And it will only come up again by deleting the system configuration preferences (via single user mode booting).
Thereafter I was sure there is a hardware problem with the airport card or the logic board. The Apple Service Provider did not find any hardware failure and finally will change the logic board. Hopefully I got the Mac back next Tuesday. I let you know about the results.
Best regards!
PS: Obviously software could damage hardware or some hardware components used by Apple are not compatible with some of their software.

GDM not starting correctly after upgrade

I just got around to upgrading my machine to the new /usr based Gnome and XFCE. Now, when GDM starts I get the error shown in this screenshot -- http://img136.imageshack.us/my.php?imag … estpn0.png. I've removed GDM and reinstalled it to no avail. Any suggestions as to how to fix this problem? I would like to have my themed GDM back.

Make sure your themes are moved over to /usr/share/gdm/themes.
mv /opt/gnome/share/gdm/themes/* /usr/share/gdm/themes/*
I think this was the main thing but I also forced a reinstall of gdm and then restarted. The restarting was accidental (telinit 0 ) but that might have also played some role.
Good luck.

AS Java applications not starting after patching from 2004s SPS10 to SPS11

Hi folks,
after patching our NetWeaver 2004s from SPS10 to SPS11 and the Kernel from 7.00.83.0 to 7.00.95.0, the applications on the AS Java do not start up automatically any more.
Under the following URLs, the same error is shown:
http://<fully qualified host name>:51000/
http://<fully qualified host name>:51000/nwa
http://<fully qualified host name>:51000/sap/monitoring/SystemInfo
http://<fully qualified host name>:51000/useradmin/
http://<fully qualified host name>:51000/wsnavigator
http://<fully qualified host name>:51000/uddiclient
503 Service Unavailable
SAP J2EE Engine/7.00
Application stopped.
Details: You have requested an application that is currently stopped
http://<fully qualified host name>:51000/webdynpro/welcome/Welcome.jsp
itself works, the two links Content Administrator and Web Dynpro Console both lead to the same 503 error described above
On http://<fully qualified host name>:51000/irj, the error message is different:
com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
Application sap.com/com.sap.portal.fpn.accessservice cannot be started because is in MANUAL start-up mode..
Exception id: 09:33_09/05/07_0003_102709250
See the details for the exception ID in the log file
In std_server0.out we have the following entries, right after the list of all services that were started:
ServiceManager started for 39904 ms.
Framework started for 46720 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel January 31, 2007 18:37 GMT
May 9, 2007 9:40:19 AM com.sap.portal.prt.sapj2ee.error [SAPEngine_Application_Thread[impl:3]_3] Fatal:
The last line with com.sap.portal.prt.sapj2ee.error is listed another 131 times, and there is also the following message:
### Excluding compile: com.sapportals.portal.prt.jndisupport.util.AbstractHierarchicalContext::lookup
We can connect to the system using Visual Administrator. Under Server->Services->Deploy, most applications are not running. It is possible to start a few applications manually, others however do not start showing different exceptions.
We have AS ABAP and AS Java installed, as well as BI, DI, EP and EPC. AS ABAP seems to be running fine.
We have also noticed the following deviations in JSPM:
BC_FES_IGS is Release 7.00 SP Level 7.0
EP_BUILDT is Release 7.00 SP Level 10.0
SAP_BUILDT is Release 7.00 SP Level 0.0
All other components except for the Kernel are Release 7.00 SP Level 11.0 or 11.2
What could be wrong, and what can we do to solve it?
Best regards,
Robert Schulte

Thanks for your response, usha rani
1. We already tried that, unfortunately, it does not help
2. We checked the kernel version thoroughly after you suggested it, everything seems to be fine. We had a Unicode kernel before, and we still have one.
3. safemode is already set to NO
4. J2EE's default.trace is full of exceptions, but none of them is pointing me into a helpful direction.
Perhaps the exceptions mean more to someone else:
java.lang.Exception: Exception loading and instanciating sub-manager:
com.sap.caf.km.repositorymanager.CAFSecurityManager
(java.lang.ClassNotFoundException: com.sap.caf.km.repositorymanager.CAFSecurityManager)
com.sapportals.wcm.repository.runtime.CmConfigurationProvider#
sap.com/irj#com.sapportals.wcm.repository.runtime.CmConfigurationProvider.Component
<SetRoomIdForDiscussionObjects> will not be available.
Failed to load class
<com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager>
#J2EE_GUEST#0####1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22
##0#0#Error##Plain###
java.lang.ClassNotFoundException:
com.sap.netweaver.coll.room.impl.filter.DiscussionSetRoomIdPropertyFilterManager
com.sap.portal.prt.runtime.broker#sap.com/irj#
com.sap.portal.prt.runtime.broker#J2EE_GUEST#0####
1e820b50fe4111db8e780013724175b4#SAPEngine_Application_Thread[impl:3]_22##0#0#
Error#1#/System/Server#Java###
[PortalServiceItem.startServices] service initialisation failed:
tc.eu.odi.conn.uwl|OdiBridgeService
[EXCEPTION]
{0}#1#com.sapportals.portal.prt.core.broker.PortalServiceInstantiationException:
Could not instantiate implementation class com.sap.tc.eu.odi.conn.uwl.OdiBridgeService
of Portal Service tc.eu.odi.conn.uwl|OdiBridgeService because: could not load the service
com.sap.engine.services.deploy.container.ApplicationInManualStartUpException:
Application sap.com/com.sap.portal.fpn.accessservice cannot be started
because is in MANUAL start-up mode.
There are many more entries in default.trace.

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

[SOLVED]X start failure after upgrade: dri3,present modules missing

I start X with ~.xinitrc from console, which won"t work after last upgrade --first in two weeks.
(EE) Server terminated with error (1).Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Xorg.log.0 :
[51:778] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[51:779] (EE) intel: Failed to load module "present" (module does not exist, 0)
Installed packages (EDIT: completed):
xf86-video-intel-2.99.{914-4,916-1}-i686 and also tried with xf86-video-intel-git, with "SNA" acceleration.
intel-dri 10-2.7-3
dri2proto 2.8-2
dri3proto 1.0-1
xf86driproto 2.1.1-3
Linux 3.15.5-2-ARCH i686
Linux CK Atom 3.16.2-1
Issue occurred after upgrading from v2.99.912-1 to v2.99.914+. I was going to try downgrade xf86-video-intel to v2.99.912-1 (as in the first thread in Refs) but went in a dependency conflict, with the older intel driver requiring glamor-egl which conflicts with xorg-server ':-|
Atom netbook
lspci:
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Some refs :
» [SOLVED] X start failure after upgrade https://bbs.archlinux.org/viewtopic.php?pid=1426837
» [Solved] xf86-video-Intel-2.99.912-1 breaks xorg https://bbs.archlinux.org/viewtopic.php?id=182932
Last edited by kozaki (2014-09-12 09:45:53)

The issue occurred after upgrading from xf86-video-intel-v2.99.912-1 to v2.99.914+ and xorg-server-1.15.2-1 to 1.16.0-6 (and -devel).
same issue if:
- Switching accelaration method to "UXA" as per https://bugs.archlinux.org/task/40860
- Adding Option "DRI" "False"
Digged a bit:
- same modules errors but appears to be a Gnome bug (X starts): https://bbs.archlinux.org/viewtopic.php?pid=1441716
- same modules errors but X starts up without problems http://www.linuxquestions.org/questions … 175511372/
makes me doubt if this issue is related to the modules not found. Which is the single indication I found so far x-/
Any light on where can the issue comes from? hardware is pretty much standard even if getting a bit old. Never had Xorg related issue so far on this pancake.
Last edited by kozaki (2014-09-11 11:05:42)

Cannot start compiz after upgrading catalyst to 8.12

Hi all, I just upgraded my catalyst to 8.12 from 8.11 today and found that I could not start compiz, while X works with Slim the login manager. Here is my xorg.conf, which works perfectly for 8.11:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "AIGLX" "on"
EndSection
Section "Files"
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "record"
Load "extmod"
Load "dri"
Load "dbe"
Load "GLcore"
Load "glx"
Load "xtrap"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "AOC"
ModelName "FW913"
EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
VendorName "ATI Technologies Inc"
BoardName "Radeon HD4650"
Option "AccelMethod" "EXA"
#Option "XAANoOffscreenPixmaps" "on"
Option "AccelDFS" "on"
Option "EnablePageFlip" "on"
Option "TexturedVideo" "on"
Option "VideoOverlay" "off"
Option "OpenGLOverlay" "off"
Option "Textured2D" "on"
Option "TexturedXrender" "on"
Option "UseFastTLS" "1"
Option "BackingStore" "on"
Option "AGPMode" "4"
Option "GARTSize" "64"
Option "ColorTiling" "true"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "RENDER" "Enable"
Option "DAMAGE" "Enable"
Option "Composite" "Enable"
EndSection
For now I have to switch back to 8.11. Anyone has a solution?

You could try playing with your options in the device section. I was not able to start X after upgrading catalyst to 8.12 but disabling the "TexturedXrender" option got it working again.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Wifi is not working properly after upgrading 7.1.1 onmy i4s

Dear Apple
i realy appriciate on your work ..right now i am suffreing from a problem that one i mentioned in subject .sometime my wifi is working good and sometime it shos dead to me ..but now its not working well after upgrading my phone on 7.1.1....
its my humble request please find a solution and provide me as soon as possble..
my totally work on wifi .
and sometime it goes hang in setting when i come on setting folder and clicked on wifi its get hang and also showing wifi is not availabe..please provide me best solution
Thanx & Regards
Sam
+91-92555-04628

settings - general - reset - reset network settings.

2007 Mac Book pro Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

My Mac Book Pro started having issues. I tried to relaod the operating system and it worked for a moment. When I tried to do a time machine back up it failed.
Now itr Shuts down at startup attempt. Tried reloading OSX and will not start up after that.

Dr.Conga,
did you try to do a Time Machine backup from your MacBook Pro, or a Time Machine restoration to it?
Are you trying to reload your current version of OS X (10.7.4, to judge from your signature), or are you trying to reload the version of Mac OS X that came on the grey installation DVDs that originally came with your MacBook Pro?

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Java is not starting up after upgradation in dual stack system

Similar Messages

Maybe you are looking for