Java J2SE 5.0 Release 4 preventing access to online meetings

Not sure if anyone else is experiencing any problems with functionality of there browsers since installing the update.
I'm not able to log onto virtual online meetings. When the applet tries to load I get the following error message -
"I'm sorry, but you do not have the correct version of Apple's Macintosh Runtime for Java (MRJ) installed. CCC Confer requires MRJ version 2.2.3 or greater to run.
Just click on the link below to go to Apple's website where you will be provided with detailed instructions on how to install the new MRJ. Please be sure to install MRJ version 2.2.3 or later.  Note that registration is required to access the Apple Care site.
MRJ Download"
I'm not able to install the older version of Java as it requires Mac OS 8 or 9 to install.
Is there some way to go back or disable the newer version of Java?
Anyone else having any problems?

You might try reading the information in the following thread, especially the post by Doc Smoke, a frequent contributor in these forums:
http://discussions.apple.com/thread.jspa?threadID=456265&tstart=0

Similar Messages

Can't access my video meetings after Lion install Flashplayer will not let me accept or deny

I can't access my online meetings after installing lion. Flashplayer will not let me accept or deny.

Yes I have tried everything. Talked with support on the phone and all they could say was it is adobe Flash players fault. They had no idea how to fix it.

J2SE 1.4 Release Candidate & Java Web Start

Hi:
We installed the J2SE 1.4 Release Candidate and our Java Web Start applications which previously worked now won't run. Upon their launch, there is the following error message :
Error Code 11 (11 Could not locate requested version) returned from server when accessing resource (http://java.sun.com/products/autodl/j2se, 1.4.0-rc)
Does anyone know why this is?
All replies are greatly appreciated!
Sincerely,
Mona

Hi:
I tried what you suggested in the jnlp file:
<j2se version="1.4 1.4.0-rc" href="http://java.sun.com/products/autodl/j2se"/>
and I am still getting the error:
The application has requested a version of the Java 2 platform (JRE) that is curently not locally installed. java Web Start was unable to automatically download and install the requested version. The JRE version must be installed manually.
Error Code 11 (11 Could not locate requested version) return from server when accessing resource: (http://java.sun.com/products/autodl/j2se, 1.4 1.4.0-rc)

Java 2 Platform Standard Edition (J2SE) 5.0 Release 1

I'm trying to use Shutterfly, an on-line photo service and am having problems. They recommended checking on my Java edition. I did at the Java check version site and got this report "You do NOT have the latest version of Java software.
The latest version of Java software = Java Runtime Environment Version 5.0 Update 6." So I downloaded but when I tried to install, I got this message: "You cannot install J2SE 5.0 Release 1 Package on this volume. This volume contains a newer version of Java 1.5." OK, I'm stumped...according to Java I don't have the current edition, but can't install it because I have a newer version? Am I missing a critical step...would sincerely appreciate any help?

According to http://developer.apple.com/releasenotes/Java/Java50Release4RN/index.html, you have J2SE 5.0 Release 4 installed. Where that fits in with Update 6, I don't have a clue. This might help, http://forums.macosxhints.com/showthread.php?t=47531.

Question about the new JAVA Update J2SE 5.0 Release 3

Here is some info about this update:
Java 2 Platform, Standard Edition (J2SE) 5.0 Release 3 allows applications and applets developed for the J2SE 5.0 platform to run on Mac OS X v 10.4.2 and later.
This update does NOT CHANGE the DEFAULT VERSION of Java on your Mac from Java 1.4.2 to J2SE 5.0, though Java applications that require J2SE 5.0 may specifically request it. You can change the preferred Java version for applications and applets by using the new Java Preferences utility. This utility is installed by the J2SE 5.0 update at /Applications/Utilities/Java/J2SE 5.0/.
http://docs.info.apple.com/article.html?artnum=302412
HERE IS MY QUESTION---
This update makes me nervous cause I don't know much about Java. IF I change my default version to this new 5.0 will it mean that some of the older Java stuff on the web won't work? Should I just download this and ignore it? What should I do about this update?
Thanks for the help!
Renée

I too seem to be suffering issues with loading web pages after the 10.4.3/Java 5.0 update. I have reinstalled both updates, changed the java settings, emptied all the caches, and tried various combinations thereof, and I still have problems with web pages loaded. most of the problems appear to be related to rendering frames and images - In fact a couple of web sites I navigate to (upon looking at the source for the page" state "It appears your browser does not support frames." I think this is something broken in the latest release. Unfortunately, I cannot reinstall the latest copy of Safari, because the installer states "This version of Safari cannot be installed. It requires version 10.4.2." I guess I am in a pickle until Apple comes out with another update. BTW I have some pages that Safari will not render but IE running on the same box will. I also noticed that the problem propagated to other applications that use Java....For instance the Dashboard widget from google (Google Maps) no longer renders the tiled (framed?) map pieces...instead you get the ubiquitous "?" icon.

Unable to install Java 2 Standard Edition (J2SE) 5.0 Release 4

After Downloading Java 2 Standard Edition (J2SE) 5.0 Release 4
my desktop computer won't recognize the .dmg formatt and this is the messege i get: The following image/disk failed to mount j2Se50Relese4.dmg i have MAC OSX 10.4.6 on a Dual 2 Ghz PowerPC G5. I also have StuffIT expander and it won't recognize it either.

Actually. No, all the problems i've been having has happened with any java downloads with the .dmg formatt all other applications where succefully unstuff.
Your answer is unclear. Can you mount other disk images by double-clicking on their .dmg files? Have you repaired permissions with Disk Utility?
I wonder if it has something to be with the versions of the upgrade. do i need to download them in an expecific order or something?
It depends. Some updates won't be applicable until you install a previous one. For example, some Security Updates won't work unless you an OS update in place.
i currently have install java 1.3.1 plug in and 1.4.2 plug in. i've never open the application thought.
If you mean the Java Plugin Settings.apps for those versions, then that's normal. I have those in addition to the Java Preferences.app from J2SE 5, which I believe is the new name for the settings.app.

I can not upgrade to Java J2SE 5.0

When I click on the package I follow the step and it gets to selecting a disk to install too and gives me this error message: "You cannot instal J2SE 5.0 release 1 package on this volume. The volume contains a new version of Java 1.5. A Java folder does show up in Applications where I can select 5.0 but it must not be all there. Can anyone help me with this?

Problem solved. I had not downloaded the latest version of 5.0 so we are now running.

J2SE 5.0 Release 4 issues.

Since a couple of days ago, after the installation of the J2SE 5.0 Release 4 I've got some problems. Some websites show the Java window, the new one, with the cup of coffee with the sun running in the back, and a progress bar in the bottom. Well, the progress bar is always empty, and the sun, yes, always making an infinite turn. If you one to check this is one of the websites: http://www.deba.net/webcam.asp?idbd=5
Quadra 605, G4 and IMac 500 Mac OS X (10.4.6)

At first sight Java is working better now, after some basic "treatment". Anyway, Java is still a debt in the OS X field. I mean from both sides: Apple and Java.

Licensing restrictions prevent access from this address.

After updating CF7 to the new DST requirements, we are seeing
INTERMITTENT issues with some SWF movies not being loaded.
flash forms work just fine.
Any indication which way to look would be fabulous.
Coldfusion-err.log shows:
03/13 15:47:48 ERROR Proxy Servlet: Licensing restrictions
prevent access from xx.xx.xx.xxx
03/13 15:47:48 ERROR Proxy Servlet: Allows addresses: [
{71.218.19.250} {192.168.1.145} {74.93.23.77} {24.131.24.127}
{192.168.1.1} ]
03/13 15:47:48 error Licensing restrictions prevent access
from this address.
java.io.IOException: Licensing restrictions prevent access
from this address.
at
flex.services.license.AddressRestrictionFilter.invoke(AddressRestrictionFilter.java:28)
at
flex.server.j2ee.cache.CacheFilter.doFilter(CacheFilter.java:165)
at
flex.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:66)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264)
at
jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

alexfrates wrote:
> After updating CF7 to the new DST requirements, we are
seeing INTERMITTENT
> issues with some SWF movies not being loaded.
>
> flash forms work just fine.
> Any indication which way to look would be fabulous.
>
> Coldfusion-err.log shows:
> 03/13 15:47:48 ERROR Proxy Servlet: Licensing
restrictions prevent access from
> xx.xx.xx.xxx
> 03/13 15:47:48 ERROR Proxy Servlet: Allows addresses: [
{71.218.19.250}
> {192.168.1.145} {74.93.23.77} {24.131.24.127}
{192.168.1.1} ]
On a J2EE multiserver install this usually means your JRun
instance is
not registered. In the JRun admin, drill down to the settings
of the
instance and check whether it is a developer edition or a
registered
edition. I wouldn't know any way to fix this other then a
reinstall.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

Prevent Access to APEX Login

I have installed 3.0.1 on XE using port 8095 and need to allow access to two applications via the Internet using two different domain names. I have set iptables to only allow outside access to port 80 on IP 123.123.123.123. I am using Apache to direct requests to the correct application. Here is the code that I am using:
<VirtualHost *:80>
ServerName domain.com
ServerAdmin [email protected]
RewriteEngine on
RewriteRule ^/$ http://domain.com/apex/ [R]
RewriteRule ^/apex/$ http://123.123.123.123:8095/apex/f?p=100:1 [P]
RewriteRule ^/apex/(.*)$ http://123.123.123.123:8095/apex/$1 [P]
ProxyPass / http:///123.123.123.123:8095/
ProxyPassReverse / http:///123.123.123.123:8095/
<Location />
Order allow,deny
Allow from all
</Location>
</VirtualHost>
Outsiders cannot directly access 123.123.123.123:8095 and http://domain.com is directed to 123.123.123.123:8095/apex/f?p=100:1. Users will see http://domain.com/apex/f?p100:1:andalotmorehere as they browse. However, I realized that I could get to the APEX login with http://domain.com:80/apex or http://domain.com/apex/f?p=4550:1. Is there any way to prevent access to the APEX login to people outside of our local network? I would appreciate any help.
Thank you,
Minh

How exactly the APEX engine forces a '404' to be returned, I am not entirely sure. Perhaps it sends back the Response with the Header Status set to 404 ?Yes, with this process on the login page.
begin
if not #OWNER#.wwv_flow_security.ip_check then
      #OWNER#.wwv_flow.g_unrecoverable_error := true;
      sys.owa_util.status_line(404, 'Page Not Found');
      sys.owa_util.http_header_close;
end if;
end;Scott

System error after installing 10.4.6 Update and J2SE 5.0 Release 4

Hi,
I just installed OS X 10.4.6 update and J2SE 5.o Release 4 and the system doesn't start any more. I get a black screen which says:
[date] [my computer name] getty:/dev/console: Operation not supported by device
Any suggestions?
I will try to start from CD (when I am home later), but first I need to eject the DVD, which is still in the drive. How to do this when the system does not start?
Thanks,
Ulrike

Hi Ulrike,
I will try to start from CD (when I am home later),
but first I need to eject the DVD, which is still in
the drive. How to do this when the system does not
start?
All CD/DVD drives that come installed in a Mac should allow you to eject the CD/DVD tray. Check your owner's manual--the instructions on how to eject the tray are usually given there. For example, on some PowerBook models you had to gently insert a paper clip into one side of the loading slot and push. On the DVD drive in my PowerMac there is a small hole through which I can instert a paper clip.
As for what is causing your problems, I don't know. From what I've gathered, however, installing the combo update (~140 megs) is more reliable than the incremental one (~60 megs). Booting from an external drive helps, too. You might try that.
-Josh

Is there an alternative to prevent access to a transaction?

Hello Everyone!
Is there an alternative to prevent access to a standard transaction when a user has the S_TCODE value already? A custom program was created through batch input recording and there are transaction calls made to the standard transaction. I had to give the S_TCODE value for the program to run for the user, but one requirement was to force the user to use the custom t-code and not use the standard one. Unfortunately, I have provided the user access to the standard t-code as demanded by the program. Is there a way around this? I assume this has to be manipulated in the program.
Thanks!

If no further intervention is needed, then you can execute the processing as a batch job with the SYSTEM type jobsstep user?
If the dialog user is processing the session in SM35 themselves or the job is executed in their name, then must also have been able to process the data manually.
In the stead of Batch Input, you should also consider redesigning the process to call a BAPI locally or via a group to process the data. This way they typically need the application authorizations but do not need an entry point to them such as S_TCODE or S_RFC.
Or reconsider the transaction code used in the Batch Input call?
Or reconsider the person (job function) who executes this processing?
Or give the originator of the data a webservice to process the data real time?
Lots of options...
Cheers,
Julius

Web Service posting via SOAP.request - Security settings prevent access...

I'm trying to call a web service via the SOAP.request object in javascript embedded into my Interactive Form. I've successfully done this with SAP NetWeaver 7.0 trial version however now I'm having this issue on a production setup. The PDF generates fine and I can fill out the form and everything. I checked the properties of both PDF documents (one that works from the trial and one that doesn't from the prod box) and they are the same, expect the one that works is PDF Version 1.6, and the one that doesn't is PDF Version 1.7.
Here's the client-side error:
Acrobat EScript Built-in Functions Version 8.0
Acrobat Annotations / Collaboration Built-in Functions Version 8.0
Acrobat Annotations / Collaboration Built-in Wizard Functions Version 8.0
Acrobat Multimedia Version 8.0
Acrobat SOAP 8.0
NotAllowedError: Security settings prevent access to this property or method.
SOAP.request:31:XFA:data[0]:mainform[0]:btnRelease[0]:click
Here's the snippet of JavaScript code:
var response = SOAP.request();
Here are the security properties of the malfunctioning PDF:
Security Method: No Security
Can be Opened By: All versions of Acrobat
Printing: Allowed
Document Assembly: Not Allowed
Content Copying: Allowed
Content Copying for Accessibility: Allowed
Page Extraction: Not Allowed
Commenting: Allowed
Filling of form fields: Allowed
Signing: Allowed
Creation of Template Pages: Allowed
How do I determine what the culprit is?

Michael,
PDF Version 1.6 means Adobe Reader 7.0.x family and PDF version 1.7 means Adobe Reader 8.0.x or 9.0.x if I am not wrong.
Also if you check LiveCycle Designer Help (Using LiveCycle Designer ES > Working with Data Sources > About data sources > Working with data connections) it clearly says that with LiveCycle Designer 8.0 secured web services are not supported and there are additional security settings for Reader 8.0 onwards, that may be causing the issue.
Chintan

SaveAs - Security settings prevent access to this property or method.

Hi,
This question seems to have been dealt with in this forum on a few occasions but I am still have trouble with it:
I have written a script to add a footer containing the file name to a PDF and then save the PDF:
app.addMenuItem( { cName: "newdoc", cUser: "Add Footer", cParent:
"File", cExec: "AddFooter()", nPos: 0 } );
function AddFooter()
for (var p = 0; p < this.numPages; p++)
var fd = this.addField("Date", "text", p, [10,5, 300,28]);
fd.textSize=10;
fd.value = this.path ;
var SaveFile = app.trustedFunction(function()
app.beginPriv();
this.saveAs(this.path);
app.endPriv();
When I try to execute this script I receive an error:
Security settings prevent access to this property or method.
Any assistance would be much appreciated.
eddiec :-)

At which line do you get the error message? Do you use Adobe Acrobat?

Page rotate script not working(not allowed error security settings prevent access to this property)

HI,
I am using a script to rotate each pages in pdf file when clicking a button. I have added a script to rotate file in the rotate button's click event as a javascript.It is working in acrobat but not in adobe reader. Pleae see the script
nStart = 0;
nEnd = this.numPages - 1;
nRotate = 90;
try
if (this.numPages > 0)
           this.setPageRotations(nStart , nEnd , nRotate)
catch(e)
app.alert("Processing error: "+e)
But I'm getting this error in adobe reader not in acrobat.'not allowed error security settings prevent access to this property or method'. What is the problem. Please anybody tell me.

OK, so here's what you do:
- Create a new file in a plain-text editor (I recommend Notepad++), and paste this code into it:
safeExecMenuItem = app.trustPropagatorFunction(function(code){
    app.beginPriv();
    app.execMenuItem(code);
    app.endPriv();
mySafeExecMenuItem = app.trustedFunction(function(code){
    app.beginPriv();
    safeExecMenuItem(code);
    app.endPriv();
Close Reader if it was open and then save this file as "MyScripts.js" and place it in the following directory (this is for Windows):
C:\Program Files (x86)\Adobe\Reader 11.0\Reader\Javascripts
If you want it to work in Acrobat as well place the file also under:
C:\Program Files (x86)\Adobe\Acrobat 11.0\Acrobat\Javascripts
Now to rotate the pages clockwise attach this code to your button (in Acrobat, of course):
mySafeExecMenuItem("RotateCW");
And to rotate them counter-clockwise, use this code:
mySafeExecMenuItem("RotateCCW");
Open your file in Reader and the buttons should rotate the pages when clicked...

Java J2SE 5.0 Release 4 preventing access to online meetings

Similar Messages

Maybe you are looking for