Java.nio.BufferUnderflowException in adapter engine

Hi experts,
I checked the adapter engine for file comm.channel and found error as:
Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.nio.BufferUnderflowException.
I tried to restart but it did not worked.
Please help on this..

This might be due to out of memory or space error in the file system. Check your file system and see there is no space disk error. Create some room for memory by deleting some files and run the interface to see whether you are able to read or write the file using file adapter.

Similar Messages

Oracle JDBC driver throwing java.nio.BufferUnderflowException exception

Hi,
We have a an application for which the middleware(SAR file) is running on Jboss.
We have configured a DCN (data change notification) listener (As part of SAR file) to listen for the databases changes on port 56090.
A weekly machine security scan has been scheduled. As part of the system scan, it scans the port 56090. Following exception has been thrown by the JDBC driver at the time of scanning.
2009-05-24 16:29:37,874 INFO [STDOUT] java.nio.BufferUnderflowException
2009-05-24 16:29:37,874 INFO [STDOUT] at java.nio.Buffer.nextGetIndex(Buffer.java:398)
2009-05-24 16:29:37,874 INFO [STDOUT] at java.nio.HeapByteBuffer.get(HeapByteBuffer.java:117)
2009-05-24 16:29:37,875 INFO [STDOUT] at oracle.jdbc.driver.NTFConnection.readByte(NTFConnection.java:616)
2009-05-24 16:29:37,875 INFO [STDOUT] at oracle.jdbc.driver.NTFConnection.readInt(NTFConnection.java:650)
2009-05-24 16:29:37,875 INFO [STDOUT] at oracle.jdbc.driver.NTFConnection.unmarshalNSDataPacket(NTFConnection.java:498)
2009-05-24 16:29:37,875 INFO [STDOUT] at oracle.jdbc.driver.NTFConnection.unmarshalOneNSPacket(NTFConnection.java:404)
2009-05-24 16:29:37,875 INFO [STDOUT] at oracle.jdbc.driver.NTFConnection.run(NTFConnection.java:181)
And during scanning time very high CPU usage (90%) is encountered. Normal CPU usage of the application server system will be around 20%.
Can you please give any information on the event/data which is causing the above exception. and how it can be handled, so as to minimize CPU usage back to 20%?
Please give more information about oracle.jdbc.driver.NTFConnection class.
Thanks in Advance
Abdur Rahman
Edited by: user11269361 on Jun 15, 2009 8:57 AM

Hi,
The DCN protocol is synchronous so if the security system scan sends a byte to the port 56090 the protocol will break. I recommend you configure the system scan to not interfere with DCN.
Regards,
Jean

Java.nio.BufferUnderflowException when send a idoc xml using sapjco3.jar

When I use sapjco3.jar to send a idoc
I have 2 IDOC ,one size is 200kb ,another is 336kb
the first one can send to sap correct, but the bigger one got Exception (java.nio.BufferUnderflowException)
If any thing I have to note when writing java code ? thanks ....
Exception:
send TXLOG-12918467-ToIDOC_20110513161427170_1125436.xml
send idoc D:\TXLOG-12918467-ToIDOC_20110513161427170_1125436.xml to SAP GateWay finished ,IDoc Tid is AC1140540B534DD1EAE61781
send TXLOG-12964100.xml
java.nio.BufferUnderflowException
     at java.nio.Buffer.nextGetIndex(Buffer.java:486)
     at java.nio.HeapCharBuffer.get(HeapCharBuffer.java:129)
     at com.sap.conn.idoc.rt.xml.DefaultIDocXMLParser.parse(DefaultIDocXMLParser.java:365)
     at com.sap.conn.idoc.rt.xml.DefaultIDocXMLProcessor.parse(DefaultIDocXMLProcessor.java:87)
     at com.sap.conn.idoc.rt.xml.DefaultIDocXMLProcessor.parse(DefaultIDocXMLProcessor.java:68)
     at com.testrite.msg.dex.sender.SAPSender.sendMessage(SAPSender.java:61)
     at com.testrite.msg.dex.sender.SAPSender.main(SAPSender.java:37)
My Code :
JCoDestination destination;
String dest = "BCE";
destination = JCoDestinationManager.getDestination(dest);
IDocRepository iDocRepository = JCoIDoc.getIDocRepository(destination);
String tid = destination.createTID();
IDocFactory iDocFactory = JCoIDoc.getIDocFactory();
IDocXMLProcessor processor = iDocFactory.getIDocXMLProcessor();
IDocDocumentList iDocList = processor.parse(iDocRepository, new BufferedInputStream(new FileInputStream("D:
TXLOG-12964100.xml"));
JCoIDoc.send(iDocList, IDocFactory.IDOC_VERSION_DEFAULT, destination, tid);

hi,
it only works with idoc to idoc scenarios I think
when you send from SAP to SAP through XI
have a look at my weblog:
/people/michal.krawczyk2/blog/2005/11/21/xi-idoc-to-idoc-tunneling--how-fast-and-easy-can-you-get
Regards,
michal

PI7.11 Can I use Java proxy on Advanced Adapter Engine ??

To:PI Specialists
Now I m planning to use Java Proxy on PI7.11.
and I want to know Java Proxy can act on AAE as local processing.
I wonder that Java Proxy do not connect to adapter engine but to integration engine.
If it connect to integration engine I ll not to use Java Proxy on AAE...
Please teach me about Java proxy will do on AAE....
Naoki Kurihara

Now I find out we can't use Java Proxy on AAE....
Please check this pdf page 12.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?quicklink=index&overridelayout=true

JAVA Adapter Engine is missing in XI 7.0

Hi All,
    I am working on new xi server 7.0 .While the configure time adapter engine was missed.After that we installed service pack 08(for Both ABAP stack & JAVA STACK).After installing also Adapter Engine is not vissibile.
          We installed these service pack 08 files for the java stack.
sap.com SAP-JEECOR 7.00 SP8 (1000.7.00.8.0.20060608124100) SAP AG SAP AG 20060909180132
sap.com CORE-TOOLS 7.00 SP8 (1000.7.00.8.0.20060601105000) SAP AG SAP AG 20060909180127
sap.com SAP_JTECHF 7.00 SP8 (1000.7.00.8.0.20060601105100) SAP AG SAP AG 20060909180133
sap.com BASETABLES 7.00 SP8 (1000.7.00.8.0.20060518071900) SAP AG SAP AG 20060909180134
sap.com JLOGVIEW 7.00 SP8 (1000.7.00.8.0.20060601105200) SAP AG SAP AG 20060909180130
sap.com SAP-JEE 7.00 SP8 (1000.7.00.8.0.20060608124100) SAP AG SAP AG 20060909180140
sap.com LM-TOOLS 7.00 SP8 (1000.7.00.8.0.20060601141123) SAP AG MAIN_APL70VAL_C 20060909180136
sap.com JSPM 7.00 SP8 (1000.7.00.8.0.20060618023100) SAP AG SAP AG 20060909180133
sap.com ADSSAP 7.00 SP8 (1000.7.00.8.0.20060524131300) SAP AG SAP AG 20060909180128
sap.com CAF-UM 7.00 SP8 (1000.7.00.8.0.20060519071848) SAP AG MAIN_APL70VAL_C 20060909180125
sap.com KM-KW_JIKS 7.00 SP8 (1000.7.00.8.0.20060601105400) SAP AG SAP AG 20060909180131
sap.com UMEADMIN 7.00 SP8 (1000.7.00.8.0.20060531093731) SAP AG MAIN_APL70VAL_C 20060909180133
sap.com BI_MMR 7.00 SP8 (1000.7.00.8.0.20060529231100) SAP AG SAP AG 20060909180135
sap.com SAP_JTECHS 7.00 SP8 (1000.7.00.8.0.20060608124200) SAP AG SAP AG 20060909180139
sap.com BI_UDI 7.00 SP8 (1000.7.00.8.0.20060529235200) SAP AG SAP AG 20060909180129
sap.com CAF 7.00 SP8 (1000.7.00.8.0.20060531093727) SAP AG MAIN_APL70VAL_C 20060909180121
sap.com SAP_XITOOL 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060909180134
sap.com SAP_XIAF 7.00 SP8 (1000.7.00.8.1.20060803090400) SAP AG SAP AG 20060909180125
sap.com SAP-XIAFC 7.00 SP8 (1000.7.00.8.2.20060828165800) SAP AG SAP AG 20060909180128
Please help me..
Thanks,
Gopi

Hi Gopi,
Last time this happened to us, we traced the problem to convoluted CIM data in SLD.
Look at oss note 764176, to see if you have the same symptons.
We deleted all XI related CIM data from SLD, restart our XI systems, and then followed OSS note 764176 to fix the CIM data.
Also please make note that there is a hot fix now for the following
sap.com      SAP-XIAFC      7.00 SP8 (1000.7.00.8.2.20060828165800)      SAP AG      SAP AG      20060919075421
sap.com      SAP_XIAF      7.00 SP8 (1000.7.00.8.1.20060803090400)      SAP AG      SAP AG      20060919075417
sap.com      SAP_JTECHF      7.00 SP8 (1000.7.00.8.1.20060706171200)      SAP AG      SAP AG      20060919075425
sap.com      SAP_JTECHS      7.00 SP8 (1000.7.00.8.1.20060706171300)      SAP AG      SAP AG      20060919075430
sap.com      SAP_XITOOL      7.00 SP8 (1000.7.00.8.2.20060828165800)      SAP AG      SAP AG      20060919075426
Hope this helps/Farshad

Message split on adapter engine for the java based IDoc adapter

Hi Guys,
Do you know if message split on adapter engine is available for the java based IDoc adapter on the single stack (PI 7.31)?
I'm getting such exception when I try to post 3 IDocs
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: Invalid XML 1.0 character encountered within IDocXML for type <ns0:Messages>:
state=EXPECTING_IMMEDIATE_TAG_END, charPosition=68, lineNumber=1, columnNumber=69, invalidChar=U+0078,
sourceSnippet=...UTF-8" standalone="no"?><ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1><...
^
Mapping is one to many.
Each IDoc content has been compared manually against the xsd schema and it was fine.
I know that old way of modifying xsd is still possible.
Best regards,
Wojciech

Did you find a solution to this? Having a similar error right now.
Thanks and kind regards
Jens

Monitor message in adapter engine through java code

Hi all,
I need to write a java code to monitor message using message ID in adapter engine.
Is it possible to write such a code?
If yes, then please provide information regarding to that.

Hi,
Check these threads
Retrieving a message id
Re: How to extract XI-header fields from XI-message in JAVA?
Thanks!

Installaing decentral Adapter Engine (Java EE) 7.1 Including Enhanc

Dear All
we are installaing decentral Adapter Engine (Java EE) 7.1 Including Enhancement package 1 on Linux with database DB2.To do installation we have followed the installation guide "Adapter Engine (Java EE) 7.1 Including Enhancement Package 1 on Linux: IBM DB2 for Linux, UNIX, and WindowsTarget"
Accoridng to that document "In the Welcome screen, choose the required SAPinst installation option under the node SAP EHP1 for SAP NetWeaver Process Integration 7.1Installation >OptionsOptional Standalone Units >Partner Connectivity Kit." we have followed the same.
The installation has been completed successfully.But to do post-installation activities the java url in not comming up.
,we have tried with physical host and ip address as well.From os level we have found that server0 process is in running status.
I am not sure why the installation guide is asking us to follow Process Integration 7.1Installation >OptionsOptional Standalone Units >Partner Connectivity Kit?
Will you please let me know whether this is the correct procedure for Installation of Adapter engine on Pi 7.1 EHP1
is there any prerequisite steps are there for adapter enginee
Thanks and Regards
ravikiran.CH

Hello
From your description, it appears that you have installed a PCK and not a decentral Adapter Engine.
I guess you need to follow Process Integration 7.1Installation
-> Optional Standalone Units
-> Adapter Engine
You can undeploy the PCK by following the steps in the note #1295094 Initialization of PI 7.1 XITOOLS fails.
Regards
Mark

Java program to restart failed message in Adapter Engine

Hi,
I am using PI 7.0.
Could anyone tell me whether there is an automated job or URL I can schedule in order to periodically resend messages sitting in the Adapter Engine receive queue that are in status System Error, Holding, or Waiting?
I want to avoid having to monitor the system through message monitoring and manually resending the messages...
Many thanks
Brian

Hi,
please check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/05/b1b740f83db533e10000000a155106/content.htm
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the System Error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.

Xi prioritization in adapter engine (ae, af, adapter framework, java, jca)

Hi Gurus,
We have both high and low priority messages using the SOAP Receiver Channel of the Central AE. How can we make sure that High Prio messages ALWAYS get a thread right away when entering the AE? Installing a separate AE is not an option.
When I look in RWB->Component Monitoring->Adapter Engine->Engine Status in the Queues tab, I see this:
SOAP_http://sap.com/xi/XI/SystemRecv true 1243 5(5) 5
[http://<xi>/mdt/SOAP_http://sap.com/xi/XI/SystemRecv]
When a new High Prio message enters, it can take 4 hours before it gets processed, because there are 1243 erroneous Low Prio messages also using the 5 available Threads...
This delay is of course unacceptable for High Prio messages.
Thanks.
Gr, Wout

OK, forgot to mention we're on PI 7.0 and no intention of upgrading.
Has anybody tried to copy the SOAP Adapter deployment descriptor, change the namenamespace from "SOAP" and "http://sap.com/xi/XI/System" into "MySOAP" and "http://company.com", copy the SOAP Adapter Metadata to the same namenamespace and redeploy it?
This way you have created your own Queue, like ...
SOAP_http://sap.com/xi/XI/System.Call.maxConsumers 5
SOAP_http://sap.com/xi/XI/System.Recv.maxConsumers 5
SOAP_http://sap.com/xi/XI/System.Rqst.maxConsumers 5
SOAP_http://sap.com/xi/XI/System.Send.maxConsumers 5
MySOAP_http://company.com.Call.maxConsumers 5
MySOAP_http://company.com.Recv.maxConsumers 5
MySOAP_http://company.com.Rqst.maxConsumers 5
MySOAP_http://company.com.Send.maxConsumers 5

Adapter engine e Monitor de serviço da SEFAZ NFE 4.0 OFF

Sap Gears! Estou com um problema depois da atualização para NFE 4.0
Antes da atualização, o monitor de status estava ok
Foi feito atualização dos SPK, TPZ files no XI, Atualização JSPM (JAVA)
Também foi atualizado o APP do NFE e aplicado as notas correspondente ao SPK 16 (ainda não disponível )
Algum santo aqui teria um rumo pra eu seguir?
Agradeço ai pessoal!!!
<< Elabore melhor a questão e dê detalhes que sejam suficientes para entendermos o problema >>
Editado pela Moderação: Fernando Ros on Sep 29, 2010 5:36 PM
Veja Regras de Comportamento item 2

Raphael,
Quando você diz "Monitor de serviço da SEFAZ" você quer dizer o monitor do GRC (http://:80/sap/bc/webdynpro/xnfe/nfe_main)? Se sim, quando você tenta acessar, ocorre um erro?
Se sim, verifique na transação SICF se os servicos do nó default_host -> sap -> bc -> webdynpro (e seus sub-nós) estão ativos.
Quando você diz Adapter Engine, significa que, ao entrar no RWB, Component Monitoring, o Status dele aparece como vermelho, indicando no "Self-test" que o item "Is the Adapter Engine running?" está vermelho?
Se sim, dê uma olhada no defaultTrace em busca de erros.
BTW, poste mais detalhes dos problemas para que fique mais claro onde é o problema.
[]'s

How to delete / cancel messages in PI adapter engine

Hello expert,
we have a scenario File (EOIO) --> PI --> ABAP. Today the file we received is big (>100mb), apparently PI can't handle it, and we got error
Transmitting the message to endpoint http://host:port/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException:
Error transmitting the message over HTTP. Reason: java.io.IOException: Error writing to server.
seems like PI adapter engine got problem while delivering the huge message to ABAP integration engine. In RWB message monitoring, the message is set to Error. Unfortunately the file has been picked up many times, thus the huge message is stuck in adpater engine. In RWB message monitoring, I can see the message listed many times and status is HOLDING because the previous message can not be delivered to Intergration engine. I want to delete/cancel all the messages, I tried in RWB message monitoring to cancell the messages, however after cancelling one message, it crashed the PI system and cause a reboot.
My question is; Is there some place in NWA (net weaver admin) to force all the messages to be deleted? (Because deleting/cancel in RWB message monitoring does not work because it causes system crash).
Thanks
Jayson

Hi Team,
I couldn't able to delete old message's from one of Q system, Persistence layer is 584 % filled, after triggering delete job(RSXMB_DELETE_MESSAGES) and Persistence layer has come to 384% and further I couldn't able to delete old messages.I executed program "
                                                                                                      RSXMB_CHECK_MSG_QUEUE" and manage to delete few entries.Could you please suggest how to reduce fill level to below 100%
Switch Procedure (for Persistence Tables) Deactivated
Number of Table Entries
3.185.992
Maximum Number of Table Entries
830.000
Current Fill Level in %
384
Threshold value for fill level for executing a switch run in %
60
Number of Logically Deleted Table Entries
0
Decline of Fill Level in % Following Deletion
384
Delete or archive processed XML messages
Job log overview for job:    SAP_BC_XMB_DELETE_001 / 06302000
Date       Time     Message text                                                                               Message class Message no. Message
13.03.2013 06:39:55 Job started                                                                                     00           516          S
13.03.2013 06:39:55 Step 001 started (program RSXMB_DELETE_MESSAGES, variant &0000000000034, user ID SAPBATCH)      00           550          S
13.03.2013 06:39:55 Value for parameters DELETION-RELATED_OBJECTS-ASYNC: 1                                        XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-RELATED_OBJECTS-ROWS: 100                                       XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-RELATED_OBJECTS-IDX5_DELAYED: 0                                 XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-ROWS_PER_LOOP-DELETE: 100                                       XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION-ASYNC: 007                                     XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION-SYNC: 007                                      XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_ERROR-SYNC: 007                                XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION-IDX5: 007                                      XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_UNIT-ASYNC: D                                  XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_UNIT-SYNC: D                                   XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_ERROR_UNIT-SYNC: D                             XMS_ADM        375          S
13.03.2013 06:39:55 Value for parameters DELETION-PERSIST_DURATION_UNIT-IDX5: D                                   XMS_ADM        375          S
13.03.2013 07:27:58 0 XML messages deleted                                                                        XMS_ADM        351          I
13.03.2013 07:27:59 Step 002 started (program RSXMB_TABLE_SWITCH, variant &0000000000034, user ID SAPBATCH)         00           550          S
13.03.2013 07:28:00 Job finished                                                                                    00           517          S

XI message status at Adapter engine level using a table (SAP table)

Hello Experts,
XI message status at Adapter engine level using a table (SAP table).
We want to write a custom report using ABAP so Pls tell why the status u2018Holdingu2019 and u2018To be deliveredu2019 are present in message monitoring of RWB but not in the status (MSGSTATE) field of SXMSPMAST table.
My need is to write a report to get the messages based on the these status from table level.
Please let me know the table name and field name for this and the table name for the desciption of the status of XI messages at Adapter level.
Thanks
Gopesh

Hi Gopesh,
the Adapter Engine Messaging System messages are on the Java schema,
i.e., see the following -
[XI/PI tables|https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xi+tables]
Regards
Kenny

XI Adapter Engine Not picking the data from FTP Server ?t

Hi All
We have upgraded oracle in our landscape
from 10.0.2.0.2 to 10.2.0.4.0
we have Redwood System , which runs the interfaces
Redwood initiates Our Satellite XI system to pick the data from the ftp server
but after the upgrade , it is not able to pick the data from the ftp server .
when checked in the Satellite XI Adapter engine getting following error
"XI Engine Error occurred while connecting to the ftp server java.net.socketException:Connection Reset"
but we are able to ftp from Satellite XI Adapter engine to ftp system manually but why Satellite XI Adapter engine is not the
picking the file (ie data) from the ftp server.
Immediate Response is highly appreciated
Regards
Edited by: sidharthmellam on Nov 23, 2009 11:54 AM

Hi Sidharth,
Please give me the FTP connection parameters mentioned in the channel.
Did you try stopping and starting the channel ?
If not please stop and start the channel.
Also catch the default trace and paste it.
Cheers...,
Raghu.

J2ee Adapter engine installation error

Hi All,
I am installing XI with NW07. I had an ERP2005 server here with ABAP only. I installed Java Add In to it with usage type PI.
Now I tried to install J2ee adapter engine. It showed if i want to run a new installation or continue the old one.
I tried to install installation of J2ee adapter engine from a new directory.
It is stuck in between. I choose it as a MCOD to existing DB.
I can see a new instance for this in MMC and it is up and running.
But the old java instance is not running. None of the Proceses of Old Java instance (dispatcher, server0 and SDM) are not running. Did I do something wrong?
My JVM_BOOTSTRAP.OUT says this:-
Exception occurred:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID4065200" does not exist.
at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(ConfigurationDataCacheAllImpl.java:107)
at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfiguration.java:715)
at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:426)
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:72)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
== Caused by: ==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID4065200) in the database! Check database consistency or local Bootstrap properties!
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:75)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Bootstrap module> Problem occurred while performing synchronization.
My dev_jcontrol.b00 shows:-
JControlStartJLaunch: program = C:\usr\sap\IDE\DVEBMGS00\exe\jlaunch.exe
-> arg00 = C:\usr\sap\IDE\DVEBMGS00\exe\jlaunch.exe
-> arg01 = pf=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg02 = -DSAPINFO=IDE_00_bootstrap
-> arg03 = -nodeId=-1
-> arg04 = -file=C:\usr\sap\IDE\DVEBMGS00\j2ee\cluster\instance.properties
-> arg05 = -syncSem=JSTARTUP_WAIT_ON_5284
-> arg06 = -nodeName=bootstrap
-> arg07 = -jvmOutFile=C:\usr\sap\IDE\DVEBMGS00\work\jvm_bootstrap.out
-> arg08 = -stdOutFile=C:\usr\sap\IDE\DVEBMGS00\work\std_bootstrap.out
-> arg09 = -locOutFile=C:\usr\sap\IDE\DVEBMGS00\work\dev_bootstrap
-> arg10 = -mode=BOOTSTRAP
-> arg11 = pf=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg12 = -DSAPSTART=1
-> arg13 = -DCONNECT_PORT=4740
-> arg14 = -DSAPSYSTEM=00
-> arg15 = -DSAPSYSTEMNAME=IDE
-> arg16 = -DSAPMYNAME=sapides_IDE_00
-> arg17 = -DSAPPROFILE=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg18 = -DFRFC_FALLBACK=ON
-> arg19 = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_09\jre\bin\server;C:\j2sdk1.4.2_09\jre\bin;F:\oracle\IDE\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_06\bin;C:\j2sdk1.4.2_06\lib;C:\usr\sap\IDE\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_09\bin;C:\usr\sap\IDE\DVEBMGS00\j2ee\os_libs;F:\oracle\IDE\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_06\bin;C:\j2sdk1.4.2_06\lib;C:\usr\sap\IDE\SYS\exe\uc\NTI386
Thr 4232 Tue Sep 16 17:48:04 2008
Thr 4232 *** ERROR => invalid return code of process bootstrap (exitcode = 66) http://jstartxx.c 1642
Thr 4232 JControlExecuteBootstrap: error executing bootstrap node bootstrap (rc = 66)
Thr 4232 JControlCloseProgram: started (exitcode = 66)
Thr 4232 JControlCloseProgram: good bye... (exitcode = 66)
My DEV_BOOTSTRAP.B00 shows:-
Thr 5984 Tue Sep 16 17:48:02 2008
Thr 5984 JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
Thr 5608 Tue Sep 16 17:48:04 2008
Thr 5608 JLaunchIExitJava: exit hook is called (rc = 66)
Thr 5608 **********************************************************************
u2022
o
     ERROR => The Java VM terminated with a non-zero exit code.
     Please see SAP Note 943602 , section 'J2EE Engine exit codes'
     for additional information and trouble shooting.
Thr 5608 JLaunchCloseProgram: good bye (exitcode = 66)
I ran the prerequisite checks before starting the installation.
It shows everything ok except it told me to have a environmental variable as CPIC_MAX_CONV with the value 200 at least. And I did that.
All the other checks were ok.
All are on SAME OS and same machine.
I have J2EE Adapter Engine installation guide, but there is nothing for this in that
In Instance properties file for the old instance it is showing the instance ID which it is not able to find.
In the configtool of both the instances, the instance ID is same under cluster_data and this is of the newer instance
How did the instance ID and data got replaced in the configtool of old instance. I mean the new instance has its new directory or folder.
What Could be the problem?
Did I do anything wrong here?
Kindly help

Hi,
Check out the SNote 997510, " Note 997510 - Troubleshooting
J2EE Engine 6.40/7.0 Bootstrap Issues ".
I hope it will help you to drill more in to the problem
Rgds
Radhakrishna D S

Java.nio.BufferUnderflowException in adapter engine

Similar Messages

Maybe you are looking for