Java no longer working properly since last firefox update

Since the latest firefox update, Java no longer works as it should on my banking website. The authorisation procedure uses Java, but the box freezes and does not finish loading. It still works fine on IE. I use Windows 7.

Mozilla are aware of the issue in Firefox 3.6.14 with some Java applets not working and are working on a fix, no timescale but they are planning on a quick release.

Similar Messages

HT1665 Why does my ihome no longer work properly since my iPod update

My ihome no longer works properly since I updated my iPod to the most current software update. Is there a fix?

Sometimes thisworks:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However,sometimes an iOS update breaks compatibility and you have to wait for either an iOS update or and update to the iHome firmware. Go to iHome's support site

Safari not working properly since last software update

I updated my software a couple days ago and ever since, my Safari won't open most websites. It will, for some reason, open my VPN and work email, as well as a couple other sites, but will not open most normal sites (apple, google, facebook, gmail, etc). It will act like it's going to, then the blue loading bar stops at about the third w, and it eventually says "Safari can’t open the page "_" because the server where this page is located isn’t responding."
I have searched through this message board and tried a lot of things that were suggested for other people with similar problems (emptying cache, resetting safari, adding DPS addresses, disabling extensions, etc), but none of them have worked. It does the same thing when I log in under another user account.
My mail application also stopped working at the same time.
I would appreciate any suggestions.

HI and welcome.....
It does the same thing when I log in under another user account. My mail application also stopped working at the same time.
Boot from your install disc and follow the instructions here to check the startup disk for errors. See, *Try Disk Utility*
http://support.apple.com/kb/TS1417
If the startup disk "appears to be ok", then install the v10.6.5 Combo Update
Then repair permissions. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. As long as you see, "Permissions Repair Complete" when it's finished... you're done. If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US 
Carolyn

Trouble with firefox.exe of Win7-64bit since last firefox update

firefox has been working fine on my laptop running win7-64bit until the last firefox update and now when i close firefox and attempt to reopen it at a later time, i get the error message that ff is still running and i have to shut it down. i go to task mgr and have to close firefox *32.exe. why am i just now having trouble with this, i wonder? thank you in advance for any and all help with this matter. it's very annoying.

See:
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use

Firefox firebug not working properly since last one week.

Firebug addon is not displaying icon and not working properly. Anybody have any idea about this.Thanks in advance.

My Firebug is still working.
* What version are you using ?
* As a troubleshooting step Try in a new Firefox profile. Disable all extensions and Plugins other than Firebug in the new profile.
**[[Use the Profile Manager to create and remove Firefox profiles]]
*The Firebug mailing list may be able to help
** https://getfirebug.com/community

Help! Java no longer works with IE or Firefox

This all started when I downloaded JRE ...whatever the latest version is. Java was working fine in both browsers. Then I installed JRE so I could run some Java program (which works fine), but now, it doesn't work in the Internet browsers. I tried uninstalling and reinstalling but still it doesn't work.
Help is appreciated! A lot of basic websites are useless without it. Thanks

Open the Windows Control Panel, there should be a Java entry. Open it and click the Java tab | Applet Runtime Settings | View, and verify that it shows the 1.5.0_01 JRE.
Then click the Advanced tab | "<APPLET> tag support"; Internet Explorer should be checked. If it's not, check it.
Open the IE Tools menu, there should be a Sun Java Console entry. If it's there, click it - it should open the Java Console, showing version 1.5.0_01.
At this point, IE should work. FF problems are a matter of FF settings, I can't help.
If after this IE isn't working, then Java is trashed, removal of Java and reinstall is probably needed. It may be necessary to manually clean the Registry. If there are multiple versions, remove them all. Reinstall 1.5.0_01 last.

Win 7 VPN Client 5.0.07 no longer works properly with Citrix DNE Update

Since Cisco Systems VPN Client does not work properly with mobile broadband on Windows 7, we've been successfully using Citrix's DNE Update to fix this for about 6 months. All of a sudden, machines with the DNE Update stopped working properly over VPN (whether using mobile broadband or not). The only fix is to unbind the DNE Lightweight driver from your network adapters, uninstall the DNE Update and reinstall the VPN Client. However, then you cannot use an aircard with VPN as the DNE Update was the fix.
Symptoms of the VPN issues with DNE Update:
-web pages displaying garbled
-internal web pages not rendering at all
-remote connectivity not working (VNC)
-RDP connects then crashes with data encryption errors
The only change that I can identify on our machines and in our environment would be Windows updates, but I've been unable to identify which one might have caused the problem.
Has anyone encountered this issue and found a fix? Does anyone know of another reliable fix for VPN Client to work with Windows 7 and aircards?
We're looking at moving to another VPN solution but that will take time and we need a more immediate solution.
Thanks in advance for your help.
Tony

Hi Prapanch
No offence . . . . but you need to read the complete thread before posting re:IP address & gateway
I'm not posting head end config because the config works with XP
There are no W7 specific parameters with ASA 8.3(2)
Multiple W7 machines have been used to test this.
We are looking at extracting level 15 logs from the client end - I will post if they don''t give an obvious answer.
TAC still not able to resolve this.
Rgds
Barry

Crossfader not working properly since latest software update

Since downloading the software update (21/01/2012) - the crossfader that I have set to maximum (12 sec) is not working correctly. It seems to play the next track about 40-50 seconds before the last one has finished !!
I have reset the crossfader to less seconds but it doesn't fade - it just plays the next track over the last but doesn't actually fade !!
Anyone else having this problem ? If so have you fixed the problem and how ????

HI and welcome.....
It does the same thing when I log in under another user account. My mail application also stopped working at the same time.
Boot from your install disc and follow the instructions here to check the startup disk for errors. See, *Try Disk Utility*
http://support.apple.com/kb/TS1417
If the startup disk "appears to be ok", then install the v10.6.5 Combo Update
Then repair permissions. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. As long as you see, "Permissions Repair Complete" when it's finished... you're done. If you see any warnings re: SUID messages, they can be safely ignored, information here: http://support.apple.com/kb/TS1448?viewlocale=en_US 
Carolyn

Audio preview no longer works correctly since AE-CC update

Hi everyone.
Since updating AE CC a couple of days ago (now on 12.1.0.168) on OSX 10.8.5, 2.7GHz i7 16GB RAM, the audio and RAM preview no longer functions correctly.
The steps I follow are:
Open AE
Open project
Press . to preview audio from where I am on the timeline, OR RAM preview workspace
What happens is my cursor turns into the wheel of doom for a about 20 seconds, then the playback begins but the audio is sped up which is wrong. Video is correct speed.
If I stop the audio or RAM preview, then preview again, everything is fine and plays instantly. If a RAM preview loops, then the audio reverts to normal speed.
I can open up any and all of my different project files and audio previews perfectly and instantly as it should. It's just the first time I press the . key on a freshly opened instance of AE that I get this problem.
I've tried restarting my mac to no avail, and also changing the pref settings away from what the settings have always been and that doesn't work either. I've even trashed my prefs and that also doesn't work.
I work exclusively at 25fps. Frame rate for RAM preview is set to auto (25) and changing this from auto to 25 doesn't work.
Memory settings are default since trashing my prefs, 16GB installed, 4GB for other apps, no checked boxes are ticked.
Any ideas on what has happened please?

Thanks for letting us know, however, this is a user to user forum and not an "Apple Run" forum.
You need to report to Apple via:
http://www.apple.com/feedback/

Long boot time since last security update?

I updated my father's mac mini over Christmas with the latest security update and ever since then it seems to have a very long boot up time....seems to vary between 5-45 mins ?
Once booted everything works fine and as normal - just the boot process takes a long time.
Has anybody else experienced this?

I would have suspected a drive issue if the bootup seemed to delay in the blue screen phase, since at that stage it's reading from the drive, but during the grey screen, aside from checking components and data integrity, it hasn't got that far.
You can, of course, check the drive manually using Disk Utility. That will certainly find any errors if you click on 'verify disk' (you can't select 'repair disk' for the drive you booted from), and indicate possible failure by anything other than SMART status showing as verified.

My copy and paste functions are not working properly since iOS 8 update

Ever since I updated to iOS 8 on my iPhone 4s the copy and paste function isn't working. It'll work the first time but any time I copy something else it pastes the first thing I copy. The only fix I've found is rebooting the phone but that is a pain to do every time I want to copy something and should be very unnecessary. I updated to 8.0.2 but that didn't fix it.

Have you tried rebooting?

Airport Express not working properly since 4.2 update

I use AE for Airtunes and it worked great until the 4.2 update several months ago. Since then it the light has remained solid amber unless I unplug it and then plug it back in. After doing this, it will remain green and connected while it is being used by iTunes, and then go back to solid amber a short time later. There are also times that the light goes out completely, and I have to unplug it. I have tried a hard reset (many times) and I have tried uploading the default software.
I would like to revert to the previous firmware if possible, or if there are other fixes to this I would like to hear them. As far as I know, this has happened to a very few people and no one knows the exact cause.

I had just updated my previously beautifully functional AE with the version 6.2 firmware update and simultaneously updated my iTunes to 4.6. Although both the firmware and software installations were successful, the new connectivity is horrible.
More info: my AE is used exclusively for AirTunes and worked well with both PC and Mac versions of iTunes up to 4.6 (OS X 10.3.9). Both Mac and PC have ample amount of memory, disk space, and compatible wifi cards and have performed well with the AE in the past.
The music will stream for a while, then stop, then stream again. I don't even get the "Rebuffering Stream" message, it just stops. Sometimes when it stops it stalls my iTunes, only when it "wakes up" I can play another song but it has to reconnect to the AE - sometimes successfully sometimes not.
I thought it may be traffic related, but this problem happens when there is absolutely no other traffic on the network - I tested that out. This also happens with all other programs closed and no other "stresses" exist on the source maching streaming the tune-age. This is repeatable on both PC and Mac machines.
I used the link above to revert to the previous version of my firmware and the same problem exists (wierd). Admittedly I hadn't done a firmware EVER before this and have had the previously functional AE for about a year.
Are there any known connectivity issues for the AE? I couldn't find anything like this in my search.
Also, I'm successfully configured as a wireless client to play AirTunes (not a repeater) with 40 bit WEP password set up (authentication is fine).
Any ideas?

HUB not working properly since 10.1 update

Ever since the 10.1 update I am not getting text message notifications in the HUB. The only way for me to know if I have received a new text message is to go to the conversation and look. This is very annoying because I am missing text messages from people that I either do not have an open conversation with or haven't had text communication with recently. Also, certain HUB notification will not delete and I cannot mark them as read.
I have tried restoring the phone to factory default, pulling the battery etc. nothing works. The only thing that sometimes works is to reset the HUB by swiping down from the top right corner five times, but this still does not work all the time. Also, refreshing the HUB does nothing.
Please address this soon as I cannot continue to use a Blackberry that doesn't work. I will most definitely be switching back to IOS or andriod is this isn't resolved soon.
thanks,
Kyle

Thanks for your reply.
The software version is 10.1.0.273
Text messages are turned on in the NUB, i'm not a newb when it comes to technology lol.
As I said, the problem is intermittent. If I perform a reset of the HUB it sometimes works to get the notifications but most times it does not. I have to go into the individual text conversations to check if I have a new message fromt he person. When I compose a new text message with a recipient that doesn't have an open conversation when new text message does not even show up in the list of text messages. I have to perform a reset of the HUB several times to get it to show up.

Since last firefox update 7 Nov - enter web address - it 'goes to sleep' until I touch the touch pad

I enter a web address and for a couple of seconds the little circle by 'Firefox' spins with 'connecting' - and with 'transferring ...' at bottom left. Okay - fine so far. But then circle stops spinning and nothing happens until I just touch the touch-bar - then it continues. This has only been happening over the last couple of days. Touching the bar seems to wake laptop up.
Regards
Martin Rookes.

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

Bluetooth devices are not working properly since ios 7 update...

Since I updated to ios 7, my Bluetooth devices are only partially compatible with my iphone. The devices will allow me to use the phone and all audio/video playback. However, I have lost the ability to do simpe tasks such as forward/reverse tracks with my devices. This loss of functionality is consistent across both Bluetooth Speakers (Monster Clarity HD) and in my vehicle (Lincoln MKX.)
Any suggestions?
Thanks!

This problem can be both hardware or software related. To elimnate the option of it being hardware related, I would make a Genius Bar appointment at your nearest Apple Store and have them check it out. They will be able to rule out the hardware issue. There are a couple of ways to try and fix hardware issues: 1) hard reset or 2) device restore. I've have linked articles with instructions to both for your reference.

Java no longer working properly since last firefox update

Similar Messages

Maybe you are looking for