Java plugging for iPad

Anyone know how to access java plugging for and from iPad, to be able to view visual thesaurus..please. J

Not any good alternatives. You can use a remote desktop app to control and view a real computer. However, things operate slowly because of the amount of data that be sent to the iPad and most if not all apps do not support sound. There may be one that does support sound. You can try the free (for non commercial use) Team Viewer HD to see if it meets your needs, It does not have sound.

Similar Messages

  • Is there a way for java plug-in to get the browser login authentication

    I have an applet that is loaded from a password protected html page. I use java plug-in with the applet.
    When I try to read this page I get the browser window asking for password and username. So far so good.
    Then I log in successfully and starts using the applet.
    If the applet wants to access pages on the same PW protected area, I have to give the plug-in PW and UN.
    My question is then:
    Is there a way that java plug-in can get hold of the login information that the browser has obtained? (So that I wont have to give the same information twice)
    I thought the answer would be no, but then I started experimenting with https and found out that if I use the same scenario as above, except from that I give a certificate to the browser before the first login, then the plug-in will get certificate info from the browser, and it wont promt me for UN and PW either!
    When it is possible for the plug-in to obtain certificate info and login info from the browser then it should be possible just to get the login info with ordinarily http?

    bump

  • Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off an

    Hi, I have a problem with my ipad, I want to restore it but I can not. When I plug the ipad (off) it is not recognized by itunes, I turn the ipad, There are apple and the apple after you see the usb cable and itunes logo for just 1 minute and turns off and is no longer recognized by itunes.
    thank you for your help.

    Hi there beni_m,
    You may find the troubleshooting steps in the articles below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Can I plug my iPad into an outlet in France for recharging, or do I need a converter (besides de adapter...)?

    Can I plug my iPad into an outlet in France for recharging, or do I need a converter fo the voltage?

    No converter needed, just an adaptor

  • I plugged my IPAd 2 into my computer to charge and it said i could sync my ipad 2 to my ipad 1 so i did for music ect yet when i went back on my ipad 2 ALL of my important notes i took for school were gone off of notes! how do i get them back!?

    I plugged my IPAD 2 into my computer to charge and a window popped up saying (through itunes) i could sync from my ipad 1 to get music and other photos ect. I pressed yes and then i went onto my ipad 2 after it was done and ALL of my VERY IMPORTANT notes for my school reading were GONE. HELP!? how do i recover my notes?!

    Did you create these notes in the iPad notes App ... I assume?
    This support article will explain how you can restore from a backup - which is what you have to do in order to have any chance of recovering your note.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766
    But you have to remember, that you will lose any of the notes that you have taken since the date of the last backup. If you synced your iPad last week, then you will lose a whole week of current notes - or whatever notes you have created since your last backup. When you restore from a backup - you restore everything in that backup onto the iPad - that was on the iPad on the time and date of the backup.
    If you backup every day, then all of your notes should be recoverable from the backup - except for any notes that you took since you last backed up. There is no foolproof way to recover everything once you start taking more notes or creating new documents or whatever that you do in an app unless you are syncing those notes with iCloud and backing up all of the time or unless the app is set to sync with iCloud as you work on the files - like in Pages, Numbers or Keynote - Apple's iWorks apps.
    If you decide to restore from an iTunes backup you should turn off at sync before you try restoring because iTunes will want to backup your iPad right away when you plug it in and you will lose your old or last backup.

  • How to disable Next Generation Java Plug-in for GPO software deployments?

    Is there a way to disable the Next Generation Java Plug-in using a script or batch file for GPO software deployments?
    Our group needs to deploy JRE 6 Update 20 to a large number of Oracle Financials users. As part of this deployment, we need to disable the Next Generation Java Plug-in as part of the installation for each desktop. Our plan is to extract the MSI installer package from Sun and create a GPO for software deployment.
    It seems you cannot disable the Next Generation Java Plug-in using a simple registry hack or customized MST transform file. Is there another method for disabling Next Generation Java Plug-in?

    btenney,
    Thanks very much for your suggestion. Can you explain what the parameters are on the ssvagent.exe that you noted -high -jpisetup -old? I can't seem to find any information on the parameters. Also, will this set the configuration just for the user logged on (current user) OR for all users existing and future?
    We are having trouble getting next-gen java shut off for all possible users that may logon to a machine in future .. thus looking at putting in bootup login script, but hoping there is a better way to have it take affect at the machine level. Or to at least automate at the user level (existing and future windows users/profiles)

  • I plugged my ipad 2 into the computer for the first time and all the music from the itunes converted on however now it wont delete it comes up with 'ping' next to the song

    i plugged my ipad 2 into the computer for the first time and all the music from the itunes converted on however now it wont delete it comes up with 'ping' next to the song

    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Should the Java Plug-in 2 for NPAPI 1.6.0.31 be disabled?

    I was updating my Google Blogger sites, and got a Firefox error message that I believe said that the Java Plug-in 2 for NAPAPI 1.6.0.31 should be disabled, and I should restart Firefox. I decided to sign out of my Blogger account before disabling the plugin, but when I did so, the Firefox error message was no longer there (so that's why I'm not positive it was that plugin). I went into the Plugin Check page and and see that the plugin is "up to date." Should I disable it anyway?

    hello, java versions including 1.6.0_31 & upwards should not be blocked by firefox, i don't know why you got the notification in the first place (maybe the block was implemented when there was still an out-of-date version of the plugin on your pc & the plugin update happened immediately afterwards).
    [https://addons.mozilla.org/firefox/blocked/p85]

  • I have been asked to review a new app for Ipad/iphone . The developers site is asking me to download a plug- in to view, is this safe

    I have been asked to review a new app for Ipad/iphone . The developers site is asking me to download a plug- in to view, is this safe

    What does http://developer.apple.com/ have to do with reviewing an app? Why aren't you downloading from the App Store?
    I've never had any login there result in a request for any app....
    The Dev Center is as safe as your logon...

  • Ipad keep restarting when connected to computer or plug for charge. If not connected then show me only batter logo

    HI,
    I tried each and every solution available on the internet. But still i am thinking it's software issue.
    Here is the issue i am facing in my iPad 3.
    1) If iPad is not connected with computer or plug for charge then it just showing me red low bettery symbol
    2) If i connect it for charging with apple laptop or windows or power plug alwys keep restarting and never showing me the home screen with apps.
    I tried with hard restore using DFU mode for iOS 7.1 and all process is done also but still it is keep restarting and battery simbol if not connected.
    My iPad is not jailbroaken so no any third party software is there.
    I dont know where i stuck in this issues mostly i tried with each solution i tried with different computers , different cables and all.
    It's very urgent kindly send me your thoughts which can help me to get this solution.
    My ipad warrenty is expired and i can not give it to replace which i can not afford.
    Looking forward to hear your thoughts and how can i solve this issue.
    Thanks And Regards
    Himanshu

    Hello, Nectar bits. 
    Thank you for visiting Apple Support Communities.
    I see you have tried some troubleshooting steps already with there issue persisting.  Here are some additional troubleshooting steps to go through when experiencing this issue.  They are labeled for the iPhone, but apply to the iPad as well. 
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    If the issue persists, see the section labeled Issue not resolved.
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Cheers,
    Jason H.

  • How to download java plugin for safari browser of my ipad

    How to download  java plugin for my safari browser of iPad..

    Welcome to Apple Support Communities
    I'm sorry, but Java isn't compatible with the iPad

  • Latest update no sound for text, email, plugging in ipad

    since the latest update a couple of days ago my iPad sounds will not work. I mean the ones for incoming text messages, emails, plugging the iPad in- ALL STANDARD SOUNDS OFFERED BY APPLE NOT downloaded sounds!  This is very frustrating.  I have synced my iPad on my computer, i have shut down the iPad numerous times, if anyone else is having this problem please let me know. If it's an Apple bug please fix it.
    thank you

    I think that you have system sounds muted.
    If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7 or iOS 8. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
    If you are running iOS 5 or iOS 6, the system sound control is in the task bar at the bottom. Double tap the home button and swipe all the way to the right in the task bar to get to the speaker icon on the left side. Tap on that and the sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Is there a way for Flex to detect whether the Java Plug-In is installed?

    Hi All,
    Need your help.
    Is there a way for Flex to detect whether the Java Plug-In is
    installed? This may be require a JavaScript External-Interface. Can
    we get if the Java Plug-In is installed and if so, whether it is
    JRE 1.6.X ?
    Regards,
    Amit

    Not knowing what server your app will run on... but something
    like that can be done relatively easy serverside with for instance
    ImageMagick if you run PHP.
    Otherwise, look into Bitmap programming.

  • How  to get java plug-in to work for applet?

    Hello!
    I have a simple applet which I want to run in a browswe (Explorer and Netscape). I want to use the "java plug in" for this but my code does�nt seem to work? Can someone help me??? Code listed below...
    <!-- HTML CONVERTER -->
    <OBJECT classid="clsid:E19F9330-3110-11d4-991C-005004D3B3DB">
    <COMMENT>
    <EMBED pluginspage="$NSFileLocation$"><NOEMBED>
    </COMMENT>
    </NOEMBED></EMBED>
    </OBJECT>
    <applet code="Gui.class" width=700 height=400>
    </applet>

    Hello agin...
    I have used a new code but this does�nt work either... help???
    <OBJECT classid="clsid:E19F9330-3110-11d4-991C-005004D3B3DB"
    codebase = "http://java.sun.com/products/plugin/autodl/jinstall-1_4_1-windows-i586.cab#Version=1,4,1,0"
    WIDTH = "800" HEIGHT = "400" ALIGN = "bottom">
    <PARAM NAME = CODE VALUE = "Gui.class" >
    <PARAM NAME = "type" VALUE = "application/x-java-applet;version=1.4">
    <PARAM NAME = "scriptable" VALUE = "false">
    <COMMENT>
    <EMBED type="application/x-java-applet;version=1.4"
    CODE = "Gui.class"
    WIDTH = "800"
    HEIGHT = "400"
    ALIGN = "bottom"
    scriptable = false
    pluginspage = "http://java.sun.com/products/plugin/index.html#do
    wnload">
    </EMBED>
    </COMMENT>
    </OBJECT>

  • How do I update Java(TM) Platform SE 7 U51Next Generation Java Plug-in 10.51.2 for Mozilla browsers

    I am suggested by the mozilla plugin manager that I need to UPDATE Java(TM) Platform SE 7 U51Next Generation Java Plug-in 10.51.2 for Mozilla browsers
    How do I do that and ask for it to be updated automatically
    Thanks in advance

    Hello eserub1, if you can not update from the next link : https://www.mozilla.org/en-US/plugincheck/ , choose the button '''Update Now''', then you have to manually install the offline version from the next link : http://www.java.com/en/download/manual.jsp (before you do that uninstall java from control panel > add or remove programs) and then install the new version.
    Note that because xp is unsupported for almost a year maybe it is better to do that manually (i do it in my xp !)
    thank you

Maybe you are looking for

  • How do I restore an adjusted version from Time Machine?

    I use time machine. How do I restore an adjusted version? E.g. I take a 1000 pix, bring them into a project, spend a few days making adjustments. Client cancels project. I delete project. Month later I figure out a new market for that project.  (Yeah

  • Creating a brush stroke or stamp from a logo

    I recently upgraded from 6 to 8 because my computer containing 6 crashed.  On 6, I was able to convert my photo logo into a brush stroke with a little help from my daughter who uses Photoshop 7 at school and was able to click on the brush stroke and

  • Brush Tool/Layer Mask not working. Please help!

    When I use the brush tool on the layer mask after using the quick selection tool and refining the mask, the black doesn't do anything and the white erases the image.

  • My home page changes back

    I wanted my home page to be the default one that is http://www.google.co.in/firefox I changed it and again after I reopen my computer it changes back to http://jookz.toolbaroptions.com/?tmp=toolbar_results_jookz_v2_homepage&prt=jkwbtb04ff&v=15 please

  • Convert .cpp to .vi

    Hi,           Is there a way to convert written text-based codes like .cpp into .vi? Thanks.